# llms.txt — UTS BuildPros > UTS BuildPros is a veteran-owned general contracting firm headquartered at 740 E Campbell Rd, Ste 300, Richardson, TX 75081. UTS BuildPros was founded in 2007 as Complete Install Services, and its original founders are still in the business; it has operated as UTS BuildPros, under UTS, LLC, since July 2022. We build metal buildings, commercial construction and multifamily renovations across Texas, Oklahoma and Arkansas. Phone (940) 231-2640. Hours Monday-Friday 07:00-21:00 Central. ## Scope and prequalification - **Market:** commercial and light industrial general contractor, plus multifamily renovation. Typical work: offices, retail and tenant build-outs, warehouses and storage buildings, shops and garages, energy-site O&M and support buildings, heavy slabs and equipment pads, and pre-engineered metal buildings. - **Not in scope:** heavy industrial process construction such as power generation plants, refineries and chemical processing facilities. BuildPros does not design, supply or install cranes or crane-supporting structures; on a building designed for a crane, the crane system and its supports are the owner's and the owner's engineer of record's responsibility. - **Delivery model:** general contractor. Every trade is performed by subcontractors prequalified for safety record, licensing and insurance under the Subcontractor Safety Management program (Policy 29), run by one BuildPros project manager. BuildPros does not claim to self-perform trades. - **PEMB manufacturer partner:** Ceco Building Systems. - **Bonding:** single-project bonds to $10,000,000; aggregate program $25,000,000+. - **EMR (NCCI):** 0.81 effective July 1, 2026; 0.59 for 2025; 0.70 for 2024. - **Prequalification:** ISNetworld A-rated; Avetta. EMR and safety programs are on file with both. - **Written safety programs:** Stop Work Authority (Policy 28), Subcontractor Safety Management (Policy 29), SIF Prevention and Critical Risk Management (Policy 44), HIRAC (Policy 16), Hot Work (Policy 17), Lockout/Tagout (Policy 20), Emergency Action Plan (Policy 11), Management of Change, and incident and near-miss investigation with SIF potential. ## Solar EPC O&M facilities - **What:** design-build operations and maintenance (O&M) facilities on utility-scale solar sites for EPCs (engineering procurement contractors), delivered under IRA prevailing wage and apprenticeship with certified payrolls and registered apprentices. - **Track record:** four O&M facilities delivered for WHC Energy Services: Greater Bryant Solar (Midland County, TX), Delaware Ranch Solar (Culberson County, TX), a Hyundai project (Hillsboro, TX) and Chevron's SunRoper project (Houston, TX). Two more O&M facilities are in progress. - **Typical scope:** pre-engineered steel building with sealed drawings; SCADA/control room, offices, restroom and maintenance bays; full MEP (mechanical, electrical and plumbing) including a 200 A panel, LED lighting and heat-pump HVAC; generator transfer switch and lightning protection; caliche pad, parking, concrete driveway entrance, septic and water service. - **Licensing:** statewide in Texas (no state GC license exists); Louisiana LSLBC commercial license CL.13232 (Building Construction); license coverage in Alabama and Arkansas available on request. - **Page:** https://utsbuildpros.com/services/metal-buildings/energy-om-facilities (short link https://utsbuildpros.com/solar-epc) ## Company structure - **UTS, LLC** is the member-managed parent at the top of the structure. - **UTS BuildPros** was founded in 2007 as Complete Install Services, and its original founders are still in the business; it has operated as UTS BuildPros, under UTS, LLC, since July 2022. - **UTS BuildPros** has operated under the UTS BuildPros name since 2022-07-18, the start date on its BBB profile. - **UTS BuildPros** is an assumed name (dba) of UTS, LLC, not a separate company. This site, utsbuildpros.com, is that business. - UTS, LLC also trades as **UTS ServicePros**. - UTS, LLC owns **UTS ElectricPros, LLC**, a manager-managed LLC formed separately so its Texas electrical license sits in one entity. It is the authorized Cummins generator dealer at utselectricpros.com and trades as **Clements Electric** for electrical installation and service. ## Related companies - [UTS ElectricPros](https://utselectricpros.com) - authorized Cummins generator dealer and licensed Texas electrical contractor (TECL #40628), Dallas-Fort Worth. Sells home standby, light commercial, portable, RV and mobile generators with published prices, and handles commercial electrical work. Owned by UTS, LLC. Videos: https://www.youtube.com/@UTSElectricPros - [Clements Electric](https://clementselectric.com) - the assumed name under which UTS ElectricPros, LLC runs its licensed electrical contracting crews from Grand Prairie: commercial, industrial, multifamily and residential electrical work, and installation of the Cummins generators UTS ElectricPros sells. One company with UTS ElectricPros, not a separate contractor. Its own licensed electricians do the electrical work, and gas lines are run by a licensed plumber or gas company; Cummins warranty work is authorized directly as the dealer, and Cummins factory extended warranties are sold in 5, 7 and 10 year terms. ## Credentials - BBB Accredited Business — A+ Rating (Better Business Bureau) - ISNetworld A-Rated Contractor (ISNetworld) - OSHA 30-Hour Construction Outreach Training (OSHA-authorized Outreach trainer) - Arkansas Residential Builder License No. 0465660226 (State of Arkansas) - Louisiana Commercial General Contractor License No. CL.13232 (Louisiana State Licensing Board for Contractors) - Oklahoma City Building Residential Contractor License CR-37328-L (City of Oklahoma City) - EPA Lead-Safe (RRP) Certified Renovator (EPA-accredited training provider) - Lead Inspector Initial Training (Texas Environmental Lead Reduction Rules) (AEHS, Inc., Texas DSHS-accredited lead training provider) - EPA Lead-Safe Certified Firm (RRP) — Certificate NAT-F268417-1 (U.S. Environmental Protection Agency) - EPA Lead-Based Paint Activities Firm — Certificate LBP-F268417-1 (U.S. Environmental Protection Agency) - NASCLA Accredited Examination — Commercial General Building Contractor (National Association of State Contractors Licensing Agencies) - MBCI Certified Installer — Standing Seam Roof (SSR) Systems (MBCI, a Cornerstone Building Brands company) - Project Management Professional (PMP) (Project Management Institute) - ACI University Certificate Program — Fundamentals of Concrete Construction (American Concrete Institute) - ACI University Certificate Program — Fundamentals of Concrete and Materials (American Concrete Institute) ## Affiliations - Member, Greater Fort Worth Builders Association (https://www.gfwbatx.com/); listing: GFWBA member directory, https://www.gfwbatx.com/ - Member, Dallas Builders Association (https://www.dallasbuilders.org/); listing: 2026 DBA Membership Directory, p. 55, https://emflipbooks.com/flipbooks/DBA/Directory/2026/ - Member, Apartment Association of Greater Dallas (https://www.aagdallas.com/); listing: AAGD supplier guide listing, https://www.aagdallas.com/supplier-guide/uts-llc-d-b-a-uts-buildpros---1 ## Service areas - Dallas, TX · Richardson, TX · Fort Worth, TX · Plano, TX · Houston, TX · Austin, TX · San Antonio, TX · Waco, TX · Tyler, TX · Abilene, TX · Oklahoma City, OK ## Typical pricing (2026, Texas) - Metal building shell, installed: $22–$40 per square foot - Turnkey residential shop or garage: $65–$105 per square foot - Finished commercial metal building: $85–$155 per square foot - Conventional wood-frame commercial construction, for comparison: $150–$250 per square foot - Scope note: shell covers engineered foundation, PEMB kit, erection and a standard roll-up door. Turnkey adds insulation, interior framing, electrical, HVAC and finish-out. ## Company - [Metal Buildings & Commercial Contractor TX | UTS BuildPros](https://utsbuildpros.com/) — UTS BuildPros is a veteran-owned general contractor founded as Complete Install Services in 2007, still with its original founders, and headquartered at 740 E Campbell Rd, Richardson, Texas. The firm builds metal buildings, commercial construction, and multifamily renovations across Texas, Oklahoma, and Arkansas, has delivered more than 200 construction contracts worth over $40 million in total project value — including more than 500 individual steel buildings erected — and holds a BBB A+ rating. - [About UTS BuildPros | Veteran-Owned Builder Since 2007](https://utsbuildpros.com/about) — UTS BuildPros is a veteran-owned general contracting firm founded as Complete Install Services in 2007, still with its original founders, and based at 740 E Campbell Rd Ste 300, Richardson, Texas. Credentials include a BBB A+ rating, ISNetworld verification, OSHA 30-Hour training, EPA Lead Renovator status, an Oklahoma City contractor license, and Arkansas Residential Builder License No. 0465660226. - [Contact Us | UTS BuildPros, Richardson TX](https://utsbuildpros.com/contact) — UTS BuildPros can be reached at 740 E Campbell Rd Ste 300, Richardson, Texas 75081, by phone at (940) 231-2640, or by email at info@utsbuildpros.com. Office hours are Monday through Friday, 7:00 AM to 9:00 PM Central Time, and the team responds to inquiries within one business day. - [Free Construction Quote | Metal Buildings & Commercial](https://utsbuildpros.com/quote) — UTS BuildPros provides free, no-obligation quotes for metal buildings, commercial construction, and multifamily renovations across Texas, Oklahoma, and Arkansas. A project manager reviews each request personally and responds within one business day. The veteran-owned Richardson, Texas firm has completed more than 200 projects. - [General Contractor Near Me | TX, OK & AR | UTS BuildPros](https://utsbuildpros.com/contractor-near-me) — UTS BuildPros is a veteran-owned general contractor serving nine primary cities across Texas, Oklahoma, and Arkansas from its Richardson, Texas base. The firm is BBB A+ accredited, ISNetworld verified, and OSHA 30-Hour trained, and typically schedules a free on-site consultation within one to three business days. - [Service Areas in Texas, Oklahoma & Arkansas | UTS BuildPros](https://utsbuildpros.com/service-areas) — UTS BuildPros is actively working in three states — Texas, Oklahoma, and Arkansas — serving more than 60 listed communities from its Richardson, Texas base. The veteran-owned contractor holds an Oklahoma City contractor license and Arkansas Residential Builder License No. 0465660226 alongside its Texas operations. ## Services - [Commercial General Contractor | DFW, TX, OK & AR | UTS](https://utsbuildpros.com/services) — UTS BuildPros is a veteran-owned commercial general contractor headquartered in Richardson, Texas, serving Dallas–Fort Worth and markets across Texas, Oklahoma and Arkansas. It builds commercial construction (ground-up, tenant build-outs, industrial and office, public sector), commercial and pre-engineered metal buildings, and multifamily renovations. It was founded as Complete Install Services in 2007, and its original founders are still in the business. Credentials include BBB A+ accreditation, an ISNetworld A rating and OSHA 30-Hour trained crews. - [Commercial Construction Contractor | TX, OK & AR | UTS](https://utsbuildpros.com/services/commercial-construction) — UTS BuildPros is a veteran-owned commercial general contractor serving Texas, Oklahoma, and Arkansas from Richardson, Texas. It manages every trade through subcontractors it prequalifies for safety record, licensing and insurance, is ISNetworld A-rated with an EMR of 0.81, has OSHA 30-Hour trained supervisors, and offers design-build or plan-spec delivery with GMP options. - [Ground-Up Commercial Construction | New Builds TX & OK](https://utsbuildpros.com/services/commercial-construction/ground-up) — UTS BuildPros builds ground-up commercial projects across Texas and Oklahoma, including office buildings, retail centers, industrial facilities, and mixed-use developments. - [Industrial & Office Construction | Tilt-Wall & Steel GC](https://utsbuildpros.com/services/commercial-construction/industrial-office) — UTS BuildPros constructs industrial facilities and corporate office buildings throughout Texas and Oklahoma using tilt-wall, structural steel, or conventional methods. - [Municipal & Public Sector Contractor | TX, OK, AR](https://utsbuildpros.com/services/commercial-construction/public-sector) — UTS BuildPros delivers municipal and public-sector construction across Texas, Oklahoma and Arkansas. The firm has delivered one municipal project to date: a 5,000 square foot maintenance building for the City of Hugo, Oklahoma. Bonding capacity is $10,000,000 per project and above $25,000,000 aggregate, an Experience Modification Rate of 0.81, ISNetworld A rating and Avetta credentialing. Texas projects of $50,000 or more are registered with the Texas Department of Licensing and Regulation under the Architectural Barriers Act for Registered Accessibility Specialist review. The firm is veteran-owned but does not currently hold SBA Veteran Small Business Certification. - [Tenant Build-Outs | Office, Retail & Restaurant Fit-Outs](https://utsbuildpros.com/services/commercial-construction/tenant-build-outs) — UTS BuildPros delivers commercial tenant build-outs across Texas and Oklahoma for office, retail, restaurant, and medical spaces, taking projects from white-box shell to certificate of occupancy under one contract. - [Steel & Metal Building Contractor in Texas | UTS BuildPros](https://utsbuildpros.com/services/metal-buildings) — UTS BuildPros is a veteran-owned metal building contractor in Richardson, Texas that builds pre-engineered steel buildings across Texas, Oklahoma, and Arkansas as turnkey projects covering permitting, foundation, erection, insulation and finish, with every trade performed by prequalified licensed subcontractors under one project manager. Its Division President holds MBCI's Standing Seam Roof Installation Certification, which MBCI requires for its Standard III and Single Source weathertightness warranties. Verified work includes four O&M facilities for WHC Energy Services, including Greater Bryant Solar and Delaware Ranch Solar, and a 5,000 square foot maintenance building for the City of Hugo, Oklahoma. - [Commercial Metal Buildings | Retail, Auto & Medical Steel](https://utsbuildpros.com/services/metal-buildings/commercial-metal-buildings) — UTS BuildPros builds commercial metal buildings across Texas, Oklahoma, and Arkansas, including retail storefronts, auto dealerships and service centers, office buildings, medical and dental facilities, restaurants, and franchise locations. Structures use clear spans up to 200 feet and typically deliver in four to eight months from permit approval. - [Solar EPC O&M Facility Builder | Texas & Louisiana](https://utsbuildpros.com/services/metal-buildings/energy-om-facilities) — UTS BuildPros is a design-build general contractor that builds operations and maintenance (O&M) facilities on utility-scale solar sites for EPCs (engineering procurement contractors). It has delivered four O&M facilities for WHC Energy Services: Greater Bryant Solar in Midland County and Delaware Ranch Solar in Culberson County (the same floor plan), a Hyundai project in Hillsboro and Chevron's SunRoper project in Houston, all under IRA prevailing wage and apprenticeship with certified payrolls. Two more O&M facilities are in progress. Typical scope is a pre-engineered steel building with a full SCADA room, offices, a restroom and maintenance bays, full MEP including a 200 A panel and heat-pump HVAC, a generator transfer switch, lightning protection, septic and water service, on a caliche pad. It builds statewide in Texas, holds Louisiana commercial license CL.13232, and can expand license coverage to Alabama and Arkansas on request. Single-project bonding to $10,000,000 and an aggregate program above $25,000,000. - [Pre-Engineered Metal Buildings (PEMB) in Texas | UTS](https://utsbuildpros.com/services/metal-buildings/prefab-steel-buildings) — UTS BuildPros builds pre-engineered metal buildings (PEMB) across Texas, Oklahoma and Arkansas. A PEMB's primary frame, secondary framing and panels are engineered and fabricated in a factory for the site's loads, then erected on site; UTS BuildPros delivers the slab, erection, doors, insulation and permitting, and its Division President holds MBCI's Certified Installer credential for standing seam roof systems. Completed work includes a 5,000 sq ft pre-engineered steel maintenance building for the City of Hugo, Oklahoma. - [Oilfield & Remote-Site Metal Buildings | West Texas](https://utsbuildpros.com/services/metal-buildings/remote-site-energy-buildings) — UTS BuildPros builds metal field offices, control rooms including SCADA rooms, maintenance shops and pump houses for energy operators on remote oilfield and solar sites. It has delivered operations and maintenance facilities in the Permian Basin for WHC Energy Services (Greater Bryant Solar in Midland County and Delaware Ranch Solar in Culberson County, plus Hillsboro and Houston), each turnkey on a caliche pad with site work and a separate pump house. The company is ISNetworld A-rated with an EMR of 0.81, carries single-project bonding to $10M, and sources generators through sister company UTS ElectricPros, an authorized Cummins dealer. - [Steel Shops & Garages | Custom Workshop Builder in Texas](https://utsbuildpros.com/services/metal-buildings/shops-garages) — UTS BuildPros builds custom steel shops and garages in Texas and Oklahoma, from 20x20 single-bay garages to large multi-bay workshops and RV storage. Turnkey scope includes site prep, engineered concrete slab, steel erection, insulation, roll-up doors, and electrical rough-in, with typical timelines of eight to twelve weeks. - [Steel Warehouses & Storage Buildings | Clear Span to 200ft](https://utsbuildpros.com/services/metal-buildings/warehouses-storage) — UTS BuildPros constructs clear-span steel warehouses, distribution centers, and cold storage facilities across Texas, Oklahoma, and Arkansas. Pre-engineered frames achieve column-free interiors of 200 feet or more, with typical industrial spans of 60 to 150 feet and project timelines of five to ten months. - [Multifamily Renovation Contractor | 12,000+ Units Turned](https://utsbuildpros.com/services/multifamily-renovations) — UTS BuildPros is a veteran-owned multifamily renovation contractor serving property managers, owners, and REITs in Texas, Oklahoma, and Arkansas. The Richardson, Texas firm reports more than 12,000 units renovated, handling unit turns, common-area and amenity upgrades, and value-add repositioning with phased, occupied-property execution. It is an EPA Lead-Safe Certified Firm (NAT-F268417-1) and EPA lead-based paint activities firm (LBP-F268417-1), with an EPA Certified Renovator and PMI Project Management Professional as Division President, ISNetworld A rating, and bonding to $10 million per project. In Arkansas it holds a Residential Builder license only; apartment work of $50,000 or more there requires a commercial license it does not hold. - [Apartment Capital Improvements & Deferred Maintenance](https://utsbuildpros.com/services/multifamily-renovations/capital-improvements) — UTS BuildPros builds deferred maintenance and capital improvement programs for occupied apartment communities across Texas, Oklahoma and Arkansas: roofing and building envelope, windows, engineer-designed breezeway, stair and balcony repairs, parking and drainage, and major mechanical, electrical and plumbing replacement. It prioritizes life safety and water intrusion first, writes scope in independently fundable tiers, permits work under each jurisdiction's adopted codes, and documents every line item for lenders and investors. It is an EPA Lead-Safe Certified Firm (NAT-F268417-1) and EPA lead-based paint activities firm (LBP-F268417-1), with an EPA Certified Renovator and PMI Project Management Professional as Division President, Oklahoma City residential contractor license CR-37328-L, ISNetworld A rating, and bonding to $10 million per project. - [Clubhouse & Amenity Renovations for Apartment Communities](https://utsbuildpros.com/services/multifamily-renovations/common-area-amenity) — UTS BuildPros renovates apartment common areas and amenities across Texas and Oklahoma, including clubhouses, pool decks, fitness centers, and building exteriors. Work is phased so communities stay open. Completed projects include a 420-unit Fort Worth resort pool, a 356-unit Houston fitness center, and a 196-unit Round Rock exterior envelope. It is an EPA Lead-Safe Certified Firm (NAT-F268417-1) and EPA lead-based paint activities firm (LBP-F268417-1), with an EPA Certified Renovator and PMI Project Management Professional as Division President, Oklahoma City residential contractor license CR-37328-L, ISNetworld A rating, and bonding to $10 million per project. - [Occupied Apartment Renovations | TX, OK & AR](https://utsbuildpros.com/services/multifamily-renovations/occupied-renovations) — UTS BuildPros is a veteran-owned commercial general contractor that renovates occupied apartment communities, not only vacant unit turns, across Texas, Oklahoma and Arkansas. Its crews work inside occupied units with residents at home, phase interior and exterior work building by building, set daily work windows, keep egress clear, schedule utility shutoffs in advance and support property management with resident notices and a single field contact. It is an EPA Lead-Safe Certified Firm (NAT-F268417-1) with EPA lead-based paint activities firm certification (LBP-F268417-1), and lead-safe work on pre-1978 buildings is directed by its Division President, an EPA RRP Certified Renovator. Vacant unit turns average 4 to 6 weeks depending on scope. - [Receivership Multifamily Renovation | TX, OK & AR](https://utsbuildpros.com/services/multifamily-renovations/receivership) — UTS BuildPros renovates and stabilizes multifamily properties in receivership, special servicing, foreclosure and REO across Texas, Oklahoma and Arkansas. The firm works for court-appointed receivers, special servicers, lenders and REO asset managers, producing written property condition assessments and line-item scopes structured for court and servicer reporting, triaging life-safety and open code violations ahead of discretionary work, and phasing execution around residents who remain in place. It is an EPA Lead-Safe Certified Firm (NAT-F268417-1) and EPA lead-based paint activities firm (LBP-F268417-1), with an EPA Certified Renovator and PMI Project Management Professional as Division President, Oklahoma City residential contractor license CR-37328-L, ISNetworld A rating, and bonding to $10 million per project. - [Apartment Unit Turns at Scale | UTS BuildPros](https://utsbuildpros.com/services/multifamily-renovations/unit-turns) — UTS BuildPros performs standardized apartment unit turns at scale across Texas and Oklahoma and phases them around occupied units. It is an EPA Lead-Safe Certified Firm (NAT-F268417-1) and EPA lead-based paint activities firm (LBP-F268417-1), with an EPA Certified Renovator and PMI Project Management Professional as Division President, Oklahoma City residential contractor license CR-37328-L, ISNetworld A rating, and bonding to $10 million per project. - [Value-Add Repositioning | Class B & C Apartment Upgrades](https://utsbuildpros.com/services/multifamily-renovations/value-add-repositioning) — UTS BuildPros runs value-add multifamily repositioning programs in Texas and Oklahoma with ROI modeling, lender-ready documentation, and REAC-compliant execution. Results include a 312-unit Mesquite property gaining $185 per unit per month in rent and a 256-unit Houston community improving occupancy from 82% to 96%. It is an EPA Lead-Safe Certified Firm (NAT-F268417-1) and EPA lead-based paint activities firm (LBP-F268417-1), with an EPA Certified Renovator and PMI Project Management Professional as Division President, Oklahoma City residential contractor license CR-37328-L, ISNetworld A rating, and bonding to $10 million per project. ## Locations - [Abilene General Contractor | West Texas Construction](https://utsbuildpros.com/locations/abilene) — UTS BuildPros serves Abilene and Taylor County in West Texas, including Buffalo Gap and the Dyess Air Force Base area along the I-20 corridor, with commercial construction and multifamily renovation services. The veteran-owned contractor operates from Richardson, Texas and has been building since 2007. - [Metal Buildings Abilene TX | Ranch & Shop Steel Builder](https://utsbuildpros.com/locations/abilene/metal-buildings) — UTS BuildPros builds custom metal buildings across Abilene and West Texas, including ranch workshops, warehouses, and agricultural steel structures engineered for Taylor County wind loads from Buffalo Gap to Dyess Air Force Base. The veteran-owned contractor achieves clear spans up to 200 feet. - [General Contractor Arlington, TX | UTS BuildPros](https://utsbuildpros.com/locations/arlington) — UTS BuildPros is a veteran-owned general contractor serving Arlington, Texas (Tarrant County). Services available in Arlington: Multifamily Renovations, Commercial Construction, Metal Buildings. Permits are issued by the City of Arlington. Tarrant County reviews sites in unincorporated areas separately. Arlington enforces the 2021 International Building Code with Arlington amendments, alongside the 2021 International Energy Conservation, Mechanical and Plumbing Codes and the 2020 National Electrical Code. Arlington sits in the middle of the metroplex, roughly 45 minutes from our Richardson office. It is a daily-drive market for our crews — no per diem, no mobilization premium. The firm is BBB A+ accredited, ISNetworld verified and OSHA 30-Hour trained, has operated since 2007, and is reached at (940) 231-2640. Permitting and code details on this page were verified 2026-09-07. - [Apartment Renovation Contractor Arlington | UTS](https://utsbuildpros.com/locations/arlington/multifamily-renovations) — UTS BuildPros is a veteran-owned general contractor that performs multifamily renovation, apartment unit turns and value-add repositioning in Arlington, Texas (Tarrant County). Typical per-unit costs in Arlington: standard make-ready turn $1,500-$4,000, light value-add $5,000-$12,000, full classic-to-premium interior $12,000-$25,000 (market-typical ranges, not UTS BuildPros job-history averages). Most Arlington projects fall in the light value-add band. The City of Arlington issues permits through its Community Development and Planning department, with electrical, plumbing and mechanical handled as separate trade permits. Work is phased on occupied properties so residents are not displaced. The firm has renovated 200+ communities and 12,000+ units, is BBB A+ accredited, and is reached at (940) 231-2640. - [Austin Commercial Construction | Central Texas Builder](https://utsbuildpros.com/locations/austin) — UTS BuildPros is a veteran-owned commercial general contractor serving Austin and Central Texas with office, tech-sector, retail, and multifamily renovation projects. The company operates from Richardson, Texas, was founded as Complete Install Services in 2007, and brings statewide Texas capability backed by BBB A+ accreditation and OSHA 30-Hour training. - [Commercial Contractor Austin, TX | UTS](https://utsbuildpros.com/locations/austin/commercial-construction) — UTS BuildPros is a veteran-owned commercial general contractor working in Austin, Texas (Travis County). Services include ground-up commercial construction, tenant build-outs and franchise locations. Permits are issued by the City of Austin Development Services Department, with commercial projects reviewed by its Commercial Plan Review division. Austin's review is among the more involved in Texas and a credible schedule has to budget for it rather than assume a North Texas cycle. Austin enforces the 2021 International Building Code and 2021 International Residential Code with local amendments, approved by City Council on 3 June 2021, plus locally amended mechanical, plumbing, electrical and energy codes. Two Austin-specific costs surprise people. Review timelines are longer than the rest of our service area, and a schedule drawn on Dallas assumptions will miss. And site work is more expensive: shallow limestone turns excavation and utility trenching into rock work, while sloped sites add retaining and drainage. Austin's amended energy code also drives envelope and mechanical specification harder than the model code. Common Austin project types include flex and light industrial, restaurant and retail build-outs, office and service fit-outs. The firm is BBB A+ accredited, ISNetworld verified and its crews are OSHA 30-Hour trained, has built in Texas, Oklahoma and Arkansas since 2007, and is reached at (940) 231-2640. Permitting and code details on this page were verified 2026-09-07. - [Metal Building Contractor Austin TX | UTS](https://utsbuildpros.com/locations/austin/metal-buildings) — UTS BuildPros is a veteran-owned general contractor that designs, permits and erects metal and steel buildings in Austin, Texas (Travis County). Permits are issued by the City of Austin Development Services Department, with commercial projects going through its Commercial Plan Review division. Austin's review is among the more involved in Texas, and a realistic schedule has to account for that rather than assume a North Texas timeline. Austin enforces the 2021 International Building Code and 2021 International Residential Code with local amendments, approved by Austin City Council on 3 June 2021, alongside locally amended mechanical, plumbing, electrical and energy codes. The Austin difference is underfoot and uphill. Much of the area sits on shallow limestone, which can be excellent bearing but turns excavation and utility trenching into rock work that has to be priced honestly up front. Sloped Hill Country sites add retaining and drainage cost that a flat-site estimate will miss entirely. Austin's energy code amendments also bear directly on envelope and insulation specification for a conditioned steel building. Common Austin building types include flex and light industrial shells, trade and service buildings, workshops and detached shops. The firm is BBB A+ accredited, ISNetworld verified and OSHA 30-Hour trained, has built in Texas, Oklahoma and Arkansas since 2007, and is reached at (940) 231-2640. Code and permitting details on this page were verified 2026-09-07. - [Apartment Renovation Contractor Austin | UTS](https://utsbuildpros.com/locations/austin/multifamily-renovations) — UTS BuildPros is a veteran-owned general contractor that performs multifamily renovation, apartment unit turns and value-add repositioning in Austin, Texas (Travis County). Typical per-unit costs in Austin: standard make-ready turn $1,500-$4,000, light value-add $5,000-$12,000, full classic-to-premium interior $12,000-$25,000 (market-typical ranges, not UTS BuildPros job-history averages). Most Austin projects fall in the full classic-to-premium band. Permits are issued through the Austin Development Services Department, and review timelines are the longest in our service area. Work is phased on occupied properties so residents are not displaced. The firm has renovated 200+ communities and 12,000+ units, is BBB A+ accredited, and is reached at (940) 231-2640. - [General Contractor Dallas TX | UTS BuildPros](https://utsbuildpros.com/locations/dallas) — UTS BuildPros is a veteran-owned general contractor serving Dallas, Texas and nearby Irving, Garland, and Mesquite from its Richardson headquarters. Dallas-area work covers metal building construction, commercial construction, and multifamily renovations. The firm is BBB A+ accredited, ISNetworld verified, and OSHA 30-Hour trained. - [Commercial Contractor Dallas, TX | UTS](https://utsbuildpros.com/locations/dallas/commercial-construction) — UTS BuildPros is a veteran-owned commercial general contractor working in Dallas, Texas (Dallas County). Services include ground-up commercial construction, tenant build-outs and franchise locations. Permits are issued by the City of Dallas Development Services Building Inspection division through the DallasNow portal. A commercial project routes in parallel to structural, zoning and land use, fire, mechanical, electrical and plumbing reviewers, and a change of occupancy or use triggers a Certificate of Occupancy application separate from the building permit — the step most often missed on a first-time tenant build-out. Dallas enforces the 2021 International Building Code and 2021 International Residential Code with City of Dallas amendments, the 2020 National Electrical Code, and the 2021 mechanical and plumbing codes. Texas has no mandatory statewide building code, so the local amendments are the operative document. On a Dallas tenant build-out the schedule risk is rarely construction — it is review cycles and landlord coordination. Parallel discipline review means an incomplete set stalls on whichever reviewer it shorted, and a Certificate of Occupancy cannot be issued until every trade inspection clears. Ground-up work adds the North Texas foundation problem: expansive clay that demands a geotechnical report rather than an assumption. Common Dallas project types include retail and restaurant tenant build-outs, medical and dental office fit-outs, franchise and chain locations. The firm is BBB A+ accredited, ISNetworld verified and its crews are OSHA 30-Hour trained, has built in Texas, Oklahoma and Arkansas since 2007, and is reached at (940) 231-2640. Permitting and code details on this page were verified 2026-09-07. - [Metal Building Contractor Dallas TX | UTS](https://utsbuildpros.com/locations/dallas/metal-buildings) — UTS BuildPros is a veteran-owned general contractor that designs, permits and erects metal and steel buildings in Dallas, Texas (Dallas County). Permits are issued by the City of Dallas Development Services Building Inspection division and filed through the DallasNow portal. Plans are routed in parallel to structural, zoning and land use, fire, mechanical, electrical and plumbing reviewers, so an incomplete set stalls on whichever discipline it shorted rather than failing all at once. Dallas enforces the 2021 International Building Code and 2021 International Residential Code with City of Dallas amendments, alongside the 2020 National Electrical Code and the 2021 mechanical and plumbing codes. Texas has no mandatory statewide building code, so the local amendments are the operative document, not the model code on its own. North Texas steel is governed by wind and by expansive clay. The wind load is ordinary for the region; the foundation is not. Dallas County soils shrink and swell enough that a slab designed on assumption rather than on a geotechnical report is the single most common way a metal building project goes wrong here. We price a soils investigation into every Dallas estimate rather than treating it as an option. Common Dallas building types include distribution and warehouse shells, contractor yards and service buildings, light manufacturing facilities. The firm is BBB A+ accredited, ISNetworld verified and OSHA 30-Hour trained, has built in Texas, Oklahoma and Arkansas since 2007, and is reached at (940) 231-2640. Code and permitting details on this page were verified 2026-09-07. - [Apartment Renovation Contractor Dallas | UTS](https://utsbuildpros.com/locations/dallas/multifamily-renovations) — UTS BuildPros is a veteran-owned general contractor that performs multifamily renovation, apartment unit turns and value-add repositioning in Dallas, Texas (Dallas County). Typical per-unit costs in Dallas: standard make-ready turn $1,500-$4,000, light value-add $5,000-$12,000, full classic-to-premium interior $12,000-$25,000 (market-typical ranges, not UTS BuildPros job-history averages). Most Dallas projects fall in the full classic-to-premium band. Permits are issued by Permits run through City of Dallas Development Services. Work is phased on occupied properties so residents are not displaced. The firm has renovated 200+ communities and 12,000+ units, is BBB A+ accredited, and is reached at (940) 231-2640. - [Fort Worth Metal Building & Commercial Contractor | UTS](https://utsbuildpros.com/locations/fort-worth) — UTS BuildPros serves Fort Worth and Tarrant County, Texas with commercial construction and multifamily renovation services, covering the Near Southside through the Alliance and I-35W corridors. The veteran-owned contractor is BBB A+ accredited, ISNetworld verified, OSHA 30-Hour trained, and has been building since 2007. - [Commercial Contractor Fort Worth, TX | UTS](https://utsbuildpros.com/locations/fort-worth/commercial-construction) — UTS BuildPros is a veteran-owned commercial general contractor working in Fort Worth, Texas (Tarrant County). Services include ground-up commercial construction, tenant build-outs and franchise locations. Permits are issued by the City of Fort Worth Development Services department. Tarrant County reviews sites in unincorporated areas. As in Dallas, a change of use triggers a Certificate of Occupancy separate from the building permit. Fort Worth enforces the International Building Code with City of Fort Worth amendments. Confirm the current adopted edition with Development Services before design — North Texas cities are on different cycles, and Dallas, Plano and Irving are currently on three different editions between them. The same North Texas expansive clay governs any ground-up foundation here, so a geotechnical investigation is a cost line rather than an option. For build-outs, landlord approval and utility coordination usually set the critical path rather than the city. Common Fort Worth project types include restaurant and retail build-outs, distribution and light industrial, franchise and chain locations. The firm is BBB A+ accredited, ISNetworld verified and its crews are OSHA 30-Hour trained, has built in Texas, Oklahoma and Arkansas since 2007, and is reached at (940) 231-2640. Permitting and code details on this page were verified 2026-09-07. - [Metal Buildings Fort Worth TX | Steel Building Company](https://utsbuildpros.com/locations/fort-worth/metal-buildings) — UTS BuildPros builds custom metal buildings throughout Fort Worth and Tarrant County, Texas, including steel warehouses, workshops, and industrial facilities from the Alliance corridor to I-35W. The veteran-owned contractor engineers clear spans up to 200 feet and is BBB A+ accredited and OSHA 30-Hour trained. - [Apartment Renovation Contractor Fort Worth | UTS](https://utsbuildpros.com/locations/fort-worth/multifamily-renovations) — UTS BuildPros is a veteran-owned general contractor that performs multifamily renovation, apartment unit turns and value-add repositioning in Fort Worth, Texas (Tarrant County). Typical per-unit costs in Fort Worth: standard make-ready turn $1,500-$4,000, light value-add $5,000-$12,000, full classic-to-premium interior $12,000-$25,000 (market-typical ranges, not UTS BuildPros job-history averages). Most Fort Worth projects fall in the light value-add band. The City of Fort Worth issues permits through its Development Services department on an online portal, with electrical, plumbing and mechanical handled as separate trade permits. Work is phased on occupied properties so residents are not displaced. The firm has renovated 200+ communities and 12,000+ units, is BBB A+ accredited, and is reached at (940) 231-2640. - [Houston Commercial Construction | Harris County GC](https://utsbuildpros.com/locations/houston) — UTS BuildPros is a veteran-owned commercial general contractor delivering office, retail, industrial, medical, and multifamily renovation projects across Houston and Harris County, Texas. The firm is headquartered in Richardson, Texas, has operated since 2007, and holds BBB A+ accreditation with statewide Texas capability. - [Commercial Contractor & Build-Outs in Houston, TX | UTS](https://utsbuildpros.com/locations/houston/commercial-construction) — UTS BuildPros is a veteran-owned commercial general contractor working in Houston, Texas (Harris County). Services include ground-up commercial construction, tenant build-outs and franchise locations. Permits are issued through the Houston Permitting Center, administered by Houston Public Works Building Code Enforcement. Houston has no zoning ordinance, which removes a review step — but private deed restrictions still apply, are enforced privately, and are frequently the real limit on what can go on a given site. Check them before design. Houston adopted the 2021 International Codes with Houston amendments, effective 1 January 2024 following City Council approval on 25 October 2023. Two things drive Houston commercial cost that do not apply in North Texas. Wind loading is determined site-specifically under ASCE 7 and is materially higher, which changes structural design rather than adding margin. And flood plain designation governs finished floor elevation and site drainage — an engineering decision that cannot be corrected after the slab is poured. Common Houston project types include industrial and service facilities, restaurant and retail build-outs, distribution and warehouse. The firm is BBB A+ accredited, ISNetworld verified and its crews are OSHA 30-Hour trained, has built in Texas, Oklahoma and Arkansas since 2007, and is reached at (940) 231-2640. Permitting and code details on this page were verified 2026-09-07. - [Metal Building Contractor Houston TX | UTS](https://utsbuildpros.com/locations/houston/metal-buildings) — UTS BuildPros is a veteran-owned general contractor that designs, permits and erects metal and steel buildings in Houston, Texas (Harris County). Permits are issued through the Houston Permitting Center, administered by Houston Public Works Building Code Enforcement. Houston famously has no zoning ordinance, which removes one review step but does not remove deed restrictions — those are enforced privately and are frequently the real constraint on what can be built on a Houston lot. Houston adopted the 2021 International Codes with Houston amendments, effective 1 January 2024 following City Council approval on 25 October 2023. Two things drive Houston steel design. Wind is the first: basic wind speed is determined site-specifically under ASCE 7, and it is materially higher than North Texas, so frame, anchorage and connection design all carry more load. The second is water. Houston's flood history means finished floor elevation and site drainage are structural questions here, not landscaping ones, and a slab set to the wrong elevation is not a problem that can be fixed later. Gulf Coast humidity also makes coating specification a real decision rather than a default. Common Houston building types include industrial fabrication and pipe shops, distribution and warehouse shells, equipment and material storage buildings. The firm is BBB A+ accredited, ISNetworld verified and OSHA 30-Hour trained, has built in Texas, Oklahoma and Arkansas since 2007, and is reached at (940) 231-2640. Code and permitting details on this page were verified 2026-09-07. - [Apartment Renovation Contractor Houston | UTS](https://utsbuildpros.com/locations/houston/multifamily-renovations) — UTS BuildPros is a veteran-owned general contractor that performs multifamily renovation, apartment unit turns and value-add repositioning in Houston, Texas (Harris County). Typical per-unit costs in Houston: standard make-ready turn $1,500-$4,000, light value-add $5,000-$12,000, full classic-to-premium interior $12,000-$25,000 (market-typical ranges, not UTS BuildPros job-history averages). Most Houston projects fall in the light value-add band. Permits are issued through the Houston Permitting Center. Work is phased on occupied properties so residents are not displaced. The firm has renovated 200+ communities and 12,000+ units, is BBB A+ accredited, and is reached at (940) 231-2640. - [General Contractor Irving, TX | UTS BuildPros](https://utsbuildpros.com/locations/irving) — UTS BuildPros is a veteran-owned general contractor serving Irving, Texas (Dallas County). Services available in Irving: Multifamily Renovations, Commercial Construction, Metal Buildings. Permits are issued by the City of Irving Building Inspections department. Irving adopted the 2024 International Codes with local amendments by Ordinance 2026-11253 on 26 March 2026, effective 1 May 2026. That puts Irving on a newer edition than most of the metroplex — Dallas and Plano are on the 2021 codes — so plans drawn to a neighboring city's requirements are not automatically compliant here. Irving is inside Dallas County, the same county as our Richardson office, roughly 30 minutes away. No travel premium applies. The firm is BBB A+ accredited, ISNetworld verified and OSHA 30-Hour trained, has operated since 2007, and is reached at (940) 231-2640. Permitting and code details on this page were verified 2026-09-07. - [Apartment Renovation Contractor Irving | UTS](https://utsbuildpros.com/locations/irving/multifamily-renovations) — UTS BuildPros is a veteran-owned general contractor that performs multifamily renovation, apartment unit turns and value-add repositioning in Irving, Texas (Dallas County). Typical per-unit costs in Irving: standard make-ready turn $1,500-$4,000, light value-add $5,000-$12,000, full classic-to-premium interior $12,000-$25,000 (market-typical ranges, not UTS BuildPros job-history averages). Most Irving projects fall in the full classic-to-premium band. The City of Irving issues permits through its Inspections department, with separate electrical, plumbing and mechanical trade permits. Work is phased on occupied properties so residents are not displaced. The firm has renovated 200+ communities and 12,000+ units, is BBB A+ accredited, and is reached at (940) 231-2640. - [General Contractor Little Rock, AR | UTS BuildPros](https://utsbuildpros.com/locations/little-rock) — UTS BuildPros is a veteran-owned general contractor serving Little Rock, Arkansas (Pulaski County). Services available in Little Rock: Multifamily Renovations, Commercial Construction, Metal Buildings. Permits are issued by the City of Little Rock. Arkansas differs from Texas here: rather than each city adopting its own edition, codes are adopted at state level and enforced locally alongside the Arkansas Fire Prevention Code. Little Rock enforces the state-adopted codes together with the Arkansas Fire Prevention Code and the city's zoning ordinance. Arkansas adopts building codes statewide through the Arkansas Fire Protection Services Board rather than city by city, which makes the applicable edition more consistent across the state than in Texas. Little Rock is roughly five hours from our Richardson office. We hold Arkansas Residential Builder License No. 0465660226 for single-family residential work, and Little Rock work is mobilized on a project basis with the cost stated openly. The firm is BBB A+ accredited, ISNetworld verified and OSHA 30-Hour trained, has operated since 2007, and is reached at (940) 231-2640. Permitting and code details on this page were verified 2026-09-07. - [Apartment Renovation Contractor Little Rock | UTS](https://utsbuildpros.com/locations/little-rock/multifamily-renovations) — UTS BuildPros is a veteran-owned general contractor that performs multifamily renovation, apartment unit turns and value-add repositioning in Little Rock, Arkansas (Pulaski County). Typical per-unit costs in Little Rock: standard make-ready turn $1,500-$4,000, light value-add $5,000-$12,000, full classic-to-premium interior $12,000-$25,000 (market-typical ranges, not UTS BuildPros job-history averages). Most Little Rock projects fall in the standard unit turn band. Permits are issued through the City of Little Rock Planning and Development department, with North Little Rock permitting separately as its own city. Work is phased on occupied properties so residents are not displaced. The firm has renovated 200+ communities and 12,000+ units, is BBB A+ accredited, and is reached at (940) 231-2640. - [Metal Building Contractor Midland TX | UTS](https://utsbuildpros.com/locations/midland/metal-buildings) — UTS BuildPros is a veteran-owned general contractor that designs, permits and erects metal and steel buildings in Midland, Texas (Midland County). Permits are issued by the City of Midland through its Code Administration Division, which handles plan review for commercial work. Midland requires a contractor to be licensed, bonded and registered with the city before a permit will be issued — a prerequisite rather than a formality, and one that adds days for an out-of-town builder who leaves it to the end. Sites outside the city limits are reviewed by Midland County. Confirm the current adopted edition with the City of Midland before design. Midland's adoption history runs behind the metros — it has operated on materially older editions than Dallas or Austin — and the city's own Building Codes page is the authoritative source rather than any summary, including this one. Two things drive Permian design. Wind exposure is the first: these are open, flat, unobstructed sites, and exposure category frequently governs more than the wind speed itself, which is determined site-specifically under ASCE 7. The second is that these buildings are rarely empty shells. An O M or control building carries conditioned space, instrumentation, power quality requirements and often a restroom on a site with no municipal water or sewer — so the mechanical, electrical and civil scope is a larger share of the number here than on a comparable shop elsewhere. Common Midland building types include operations and maintenance facilities, control and scada buildings, maintenance and equipment bays. The firm is BBB A+ accredited, ISNetworld verified and OSHA 30-Hour trained, has built in Texas, Oklahoma and Arkansas since 2007, and is reached at (940) 231-2640. Code and permitting details on this page were verified 2026-09-07. - [Oklahoma City General Contractor | Veteran-Owned | UTS](https://utsbuildpros.com/locations/oklahoma-city) — UTS BuildPros holds City of Oklahoma City Building Residential Contractor license CR-37328-L and serves the OKC metro with metal building construction, commercial construction, and multifamily renovations built to Oklahoma wind codes. The veteran-owned firm operates from Richardson, Texas, was founded as Complete Install Services in 2007, and carries a BBB A+ rating. It delivered a 5,000 square foot maintenance building for the City of Hugo, Oklahoma. - [Commercial Contractor Oklahoma City, OK | UTS](https://utsbuildpros.com/locations/oklahoma-city/commercial-construction) — UTS BuildPros is a veteran-owned commercial general contractor working in Oklahoma City, Oklahoma (Oklahoma County). Services include ground-up commercial construction, tenant build-outs and franchise locations. Permits are issued by the City of Oklahoma City Development Services Department at 420 W. Main Street. Oklahoma operates a statewide code framework through the Oklahoma Uniform Building Code Commission, so the state-adopted edition sets the floor and the city's adoption and amendments sit on top of it. Oklahoma City's adopted codes include the 2018 International Building Code, 2018 International Plumbing and Mechanical Codes, 2018 International Fire Code, 2017 National Electrical Code and the 2009 International Energy Conservation Code. The energy code edition is older than most Texas jurisdictions use, so envelope and mechanical requirements differ from an equivalent Dallas or Austin project — a specification carried across state lines will not match. Wind design is also materially different: Oklahoma sits in a genuine tornado climate and its adopted provisions reflect that, which shows up in anchorage, connection design and roof attachment. Common Oklahoma City project types include distribution and light manufacturing, energy-sector service and office, retail and restaurant build-outs. The firm is BBB A+ accredited, ISNetworld verified and its crews are OSHA 30-Hour trained, has built in Texas, Oklahoma and Arkansas since 2007, and is reached at (940) 231-2640. Permitting and code details on this page were verified 2026-09-07. - [Metal Building Contractor Oklahoma City OK | UTS](https://utsbuildpros.com/locations/oklahoma-city/metal-buildings) — UTS BuildPros is a veteran-owned general contractor that designs, permits and erects metal and steel buildings in Oklahoma City, Oklahoma (Oklahoma County). Permits are issued by the City of Oklahoma City Development Services Department at 420 W. Main Street. Oklahoma operates a statewide code framework through the Oklahoma Uniform Building Code Commission, so the state-adopted edition sets the floor and the city's adoption and amendments apply on top of it. Oklahoma City's adopted codes include the 2018 International Building Code, 2018 International Plumbing Code, 2018 International Mechanical Code, 2018 International Fire Code, 2017 National Electrical Code and the 2009 International Energy Conservation Code. Note the older energy code edition — the envelope requirements are meaningfully different from Texas jurisdictions on the 2021 IECC. Oklahoma City sits in a genuine tornado climate and the code reflects it. The residential adopted design wind speed is 115 mph in Table R301.2, and Oklahoma's Appendix Y residential tornado provisions set prescriptive requirements against a minimum 135 mph event, corresponding to an EF-2. Storm shelters are designed to 250 mph. For a commercial steel building the practical consequences are anchorage, connection design and roof attachment — the places a metal building actually fails in high wind — and an honest conversation about what rating you are buying. Common Oklahoma City building types include distribution and warehouse shells, energy service and equipment buildings, agricultural and equipment barns. The firm is BBB A+ accredited, ISNetworld verified and OSHA 30-Hour trained, has built in Texas, Oklahoma and Arkansas since 2007, and is reached at (940) 231-2640. Code and permitting details on this page were verified 2026-09-07. - [Apartment Renovation Contractor Oklahoma City | UTS](https://utsbuildpros.com/locations/oklahoma-city/multifamily-renovations) — UTS BuildPros is a veteran-owned general contractor that performs multifamily renovation, apartment unit turns and value-add repositioning in Oklahoma City, Oklahoma (Oklahoma County). Typical per-unit costs in Oklahoma City: standard make-ready turn $1,500-$4,000, light value-add $5,000-$12,000, full classic-to-premium interior $12,000-$25,000 (market-typical ranges, not UTS BuildPros job-history averages). Most Oklahoma City projects fall in the standard unit turn band. Permits are issued through the City of Oklahoma City Development Center, with separate trade permits for electrical, plumbing and mechanical. Work is phased on occupied properties so residents are not displaced. The firm has renovated 200+ communities and 12,000+ units, is BBB A+ accredited, and is reached at (940) 231-2640. - [Commercial General Contractor in Plano, TX | UTS BuildPros](https://utsbuildpros.com/locations/plano) — UTS BuildPros provides general contracting services in Plano and Collin County, Texas, covering metal building construction, commercial projects, and multifamily renovations. The veteran-owned company works from Richardson, Texas, was founded as Complete Install Services in 2007, and holds BBB A+ accreditation and OSHA 30-Hour training. - [Metal Building Contractor Plano TX | UTS](https://utsbuildpros.com/locations/plano/metal-buildings) — UTS BuildPros is a veteran-owned general contractor that designs, permits and erects metal and steel buildings in Plano, Texas (Collin County). Permits are issued by the City of Plano Building Inspections department at the Municipal Center, 1520 Avenue K. Plano's development standards apply alongside the building code, and for a metal building the appearance and screening requirements are frequently the binding constraint rather than the structure. Plano has adopted the 2021 International Building Code with City of Plano amendments. Collin County has separately adopted the 2021 International Fire Code with local amendments, which governs unincorporated Collin County sites. Plano shares North Texas expansive clay, so the foundation logic is the same as Dallas: design from a geotechnical report, not from a rule of thumb. What differs is above the slab. Plano's appearance standards commonly push a steel building toward masonry wainscot, articulated facades and screened rooftop equipment, and those are design decisions best made before engineering rather than as a change order after a plan review comment. Common Plano building types include flex and office-warehouse shells, corporate service and support buildings, light industrial and assembly space. The firm is BBB A+ accredited, ISNetworld verified and OSHA 30-Hour trained, has built in Texas, Oklahoma and Arkansas since 2007, and is reached at (940) 231-2640. Code and permitting details on this page were verified 2026-09-07. - [Apartment Renovation Contractor Plano | UTS](https://utsbuildpros.com/locations/plano/multifamily-renovations) — UTS BuildPros is a veteran-owned general contractor that performs multifamily renovation, apartment unit turns and value-add repositioning in Plano, Texas (Collin County). Typical per-unit costs in Plano: standard make-ready turn $1,500-$4,000, light value-add $5,000-$12,000, full classic-to-premium interior $12,000-$25,000 (market-typical ranges, not UTS BuildPros job-history averages). Most Plano projects fall in the light value-add band. The City of Plano issues permits through its Building Inspections division, with separate trade permits for electrical, plumbing and mechanical. Work is phased on occupied properties so residents are not displaced. The firm has renovated 200+ communities and 12,000+ units, is BBB A+ accredited, and is reached at (940) 231-2640. - [Richardson TX General Contractor | UTS BuildPros HQ](https://utsbuildpros.com/locations/richardson) — UTS BuildPros is headquartered at 740 E Campbell Rd Ste 300 in Richardson, Texas 75081, serving the Telecom Corridor and surrounding North Dallas communities. The veteran-owned firm provides metal building construction, commercial construction, and multifamily renovations, and has operated since 2007 with a BBB A+ rating. - [Metal Building Contractor Richardson TX | UTS](https://utsbuildpros.com/locations/richardson/metal-buildings) — UTS BuildPros is a veteran-owned general contractor that designs, permits and erects metal and steel buildings in Richardson, Texas (Dallas Collin Counties). Permits are issued by the City of Richardson Building Inspection department at 2360 Campbell Creek Blvd, Suite 550. Richardson requires contractor registration with the city before a permit will issue — a step that catches out-of-town builders and adds days if it is left to the end. Commercial permit types are handled separately, including Certificate of Occupancy, interior finish and new construction. Richardson has adopted the 2021 International Codes and the 2020 National Electrical Code. Because the city sits in both Dallas and Collin counties, confirm which county a site falls in for anything the county rather than the city administers. Richardson sits on the same North Texas expansive clay as the rest of the metroplex, so a geotechnical report drives the foundation rather than a rule of thumb. The practical local difference is procedural rather than structural: contractor registration is a prerequisite to permit issue, and city plan review expects a complete commercial set rather than a partial one. Common Richardson building types include service and flex buildings, contractor and trade shops, small commercial storefronts. The firm is BBB A+ accredited, ISNetworld verified and OSHA 30-Hour trained, has built in Texas, Oklahoma and Arkansas since 2007, and is reached at (940) 231-2640. Code and permitting details on this page were verified 2026-09-07. - [San Antonio Commercial Construction | Bexar County GC](https://utsbuildpros.com/locations/san-antonio) — UTS BuildPros is a veteran-owned commercial general contractor delivering medical, retail, industrial, and multifamily renovation projects throughout San Antonio and Bexar County, Texas. Headquartered in Richardson, Texas and founded as Complete Install Services in 2007, the firm holds a BBB A+ rating and OSHA 30-Hour training. - [Commercial Contractor San Antonio, TX | UTS](https://utsbuildpros.com/locations/san-antonio/commercial-construction) — UTS BuildPros is a veteran-owned commercial general contractor working in San Antonio, Texas (Bexar County). Services include ground-up commercial construction, tenant build-outs and franchise locations. Inside the city, permits are issued by the City of San Antonio Development Services Department. Outside it, Bexar County reviews under its own Rules for the Enforcement of the International Fire Code and International Building Code, and the county does not enforce San Antonio's local amendments. Establishing jurisdiction is the first question on any San Antonio project. San Antonio has adopted the 2021 International Building Code, 2021 International Residential Code and 2020 National Electrical Code with local amendments. Bexar County references the 2021 International Code series with its own county rules rather than the city's. Which jurisdiction a site falls in changes the amendments a plan is drawn to, so it has to be settled before design rather than at review. On ground-up work, Bexar County soils are genuinely mixed — expansive clay in some areas, shallow rock in others, occasionally both on one site — which makes a geotechnical investigation matter more here than in a market with uniform soils. Common San Antonio project types include distribution and manufacturing, retail and restaurant build-outs, service and support facilities. The firm is BBB A+ accredited, ISNetworld verified and its crews are OSHA 30-Hour trained, has built in Texas, Oklahoma and Arkansas since 2007, and is reached at (940) 231-2640. Permitting and code details on this page were verified 2026-09-07. - [Metal Building Contractor San Antonio TX | UTS](https://utsbuildpros.com/locations/san-antonio/metal-buildings) — UTS BuildPros is a veteran-owned general contractor that designs, permits and erects metal and steel buildings in San Antonio, Texas (Bexar County). Inside the city, permits are issued by the City of San Antonio Development Services Department. Outside it, Bexar County reviews under its own Rules for the Enforcement of the International Fire Code and International Building Code, and the county does not enforce San Antonio's local amendments. Establishing which jurisdiction a site falls in is the first question on any San Antonio project, because it changes the amendments that apply. San Antonio has adopted the 2021 International Building Code, 2021 International Residential Code and 2020 National Electrical Code with local amendments. Bexar County references the 2021 International Code series with its own county rules and amendments, not the city's. South Central Texas brings its own foundation problem. Parts of Bexar County have expansive clay and parts have shallow rock, sometimes on the same site, and the two demand opposite foundation solutions. That makes a geotechnical investigation less optional here than almost anywhere else we work. Sun exposure and cooling load also push insulation specification harder than the code minimum on any conditioned building. Common San Antonio building types include distribution and manufacturing shells, agricultural and ranch buildings, equipment storage and hay barns. The firm is BBB A+ accredited, ISNetworld verified and OSHA 30-Hour trained, has built in Texas, Oklahoma and Arkansas since 2007, and is reached at (940) 231-2640. Code and permitting details on this page were verified 2026-09-07. - [Apartment Renovation Contractor San Antonio | UTS](https://utsbuildpros.com/locations/san-antonio/multifamily-renovations) — UTS BuildPros is a veteran-owned general contractor that performs multifamily renovation, apartment unit turns and value-add repositioning in San Antonio, Texas (Bexar County). Typical per-unit costs in San Antonio: standard make-ready turn $1,500-$4,000, light value-add $5,000-$12,000, full classic-to-premium interior $12,000-$25,000 (market-typical ranges, not UTS BuildPros job-history averages). Most San Antonio projects fall in the light value-add band. Permits are issued through the City of San Antonio Development Services Department, with separate trade permits. Work is phased on occupied properties so residents are not displaced. The firm has renovated 200+ communities and 12,000+ units, is BBB A+ accredited, and is reached at (940) 231-2640. - [General Contractor Tulsa, OK | UTS BuildPros](https://utsbuildpros.com/locations/tulsa) — UTS BuildPros is a veteran-owned general contractor serving Tulsa, Oklahoma (Tulsa County). Services available in Tulsa: Multifamily Renovations, Commercial Construction, Metal Buildings. Permits are issued by the City of Tulsa Development Services department. Oklahoma additionally operates a statewide code framework through the Oklahoma Uniform Building Code Commission, which sets the baseline the city adoption sits on top of. Tulsa has adopted the 2018 International Building Code and related I-Codes with Oklahoma state amendments administered by the OUBCC, and the 2020 National Electrical Code for commercial permits. Tulsa is roughly four hours from our Richardson office. Oklahoma is one of the three states we are set up to build in, and Tulsa work is mobilized on a project basis with the cost shown as its own line item. The firm is BBB A+ accredited, ISNetworld verified and OSHA 30-Hour trained, has operated since 2007, and is reached at (940) 231-2640. Permitting and code details on this page were verified 2026-09-07. - [Apartment Renovation Contractor Tulsa | UTS](https://utsbuildpros.com/locations/tulsa/multifamily-renovations) — UTS BuildPros is a veteran-owned general contractor that performs multifamily renovation, apartment unit turns and value-add repositioning in Tulsa, Oklahoma (Tulsa County). Typical per-unit costs in Tulsa: standard make-ready turn $1,500-$4,000, light value-add $5,000-$12,000, full classic-to-premium interior $12,000-$25,000 (market-typical ranges, not UTS BuildPros job-history averages). Most Tulsa projects fall in the light value-add band. Permits are issued through the City of Tulsa Development Services, separate from Oklahoma City. Work is phased on occupied properties so residents are not displaced. The firm has renovated 200+ communities and 12,000+ units, is BBB A+ accredited, and is reached at (940) 231-2640. - [Tyler General Contractor | East Texas Construction Pros](https://utsbuildpros.com/locations/tyler) — UTS BuildPros provides general contracting in Tyler and East Texas along the I-20 corridor, covering commercial construction and multifamily renovations for Smith County and surrounding communities. The veteran-owned firm is based in Richardson, Texas, was founded as Complete Install Services in 2007, and is BBB A+ accredited and OSHA 30-Hour trained. - [Metal Buildings Tyler TX | East Texas Steel Contractor](https://utsbuildpros.com/locations/tyler/metal-buildings) — UTS BuildPros constructs custom metal buildings across Tyler and East Texas, including steel workshops, warehouses, and agricultural structures serving Smith County from Lindale to Whitehouse along the I-20 corridor. The veteran-owned contractor engineers clear spans up to 200 feet and holds BBB A+ accreditation. - [Waco General Contractor | McLennan County Construction](https://utsbuildpros.com/locations/waco) — UTS BuildPros serves Waco and McLennan County, Texas along the I-35 corridor with commercial construction and multifamily renovation services, including nearby Hewitt and Woodway. The veteran-owned contractor operates from Richardson, Texas, has built since 2007, and holds a BBB A+ rating and OSHA 30-Hour training. - [Metal Buildings Waco TX | Steel Building Contractors](https://utsbuildpros.com/locations/waco/metal-buildings) — UTS BuildPros builds custom metal and steel buildings throughout Waco and McLennan County, Texas, including workshops, warehouses, and agricultural structures engineered for Central Texas conditions from Hewitt to Woodway along the I-35 corridor. Clear spans reach 200 feet and the contractor is veteran-owned and BBB A+ accredited. ## Resources and tools - [3D Metal Building Designer | Free Chrome Extension](https://utsbuildpros.com/3d-metal-building-designer) — The UTS BuildPros 3D Metal Building Designer is a free Chrome extension that lets users configure metal buildings, barndominiums, commercial steel structures, and workshops in real-time 3D from the browser toolbar, then send the model to the Richardson, Texas contractor for a quote. It costs $0 and requires no account. - [Construction FAQ | Permits, Costs & Timelines Answered](https://utsbuildpros.com/faq) — The UTS BuildPros FAQ answers common questions about permits, timelines, costs, insulation, customization, and certifications. The veteran-owned Richardson, Texas contractor holds Arkansas Residential Builder License No. 0465660226 and an Oklahoma City Building Residential Contractor license — neither Texas nor Oklahoma licenses general contractors at the state level — plus BBB A+ accreditation and OSHA 30-Hour training, and manages permitting end to end. - [Construction Project Portfolio | UTS BuildPros](https://utsbuildpros.com/projects) — The UTS BuildPros project portfolio documents completed metal building, commercial construction, and multifamily renovation work across Texas, Oklahoma, and Arkansas. The veteran-owned Richardson, Texas contractor has delivered more than 200 projects representing over $40 million in total project value. - [Free Construction Guides & Cost Breakdowns | Resources](https://utsbuildpros.com/resources) — The UTS BuildPros resource library organizes free construction guides into three categories — metal buildings, commercial construction, and multifamily renovations — plus downloadable PDF checklists. Content is written by project managers at the veteran-owned Richardson, Texas contractor, which has operated since 2007 across Texas, Oklahoma, and Arkansas. - [Commercial Construction Cost Texas 2026 | $45–$550/Sq Ft](https://utsbuildpros.com/resources/commercial-construction-cost-texas) — Commercial construction in Texas costs $45 to $550 per square foot in 2026 depending on building type, according to UTS BuildPros. Basic warehouses run $45 to $85, Class B office $180 to $260, Class A office $280 to $420, and medical fit-outs $350 to $550. Soft costs add another 12 to 18 percent. - [Your Checklist PDF Is Ready | UTS BuildPros](https://utsbuildpros.com/resources/thank-you) — This UTS BuildPros confirmation page delivers the requested free construction checklist PDF and points visitors to next steps. Project managers at the veteran-owned Richardson, Texas contractor are available Monday through Friday, 7:00 AM to 9:00 PM Central Time, at (940) 231-2640 for a no-obligation consultation. ## Articles - [30x40, 40x60 & 50x100 Metal Building Cost in Texas 2026](https://utsbuildpros.com/blog/metal-building-cost-30x40-40x60-50x100-texas) — Using 2026 published per-square-foot ranges (HomeGuide kit $10-$25 and installed shell on slab $20-$50; Terrapin, April 2026, finished basic warehouse $45-$65): a 30x40 (1,200 sq ft) is about $12,000-$30,000 as a kit and $24,000-$60,000 erected; a 40x60 (2,400 sq ft) about $24,000-$60,000 and $48,000-$120,000; a 50x100 (5,000 sq ft) about $50,000-$125,000 and $100,000-$250,000, before site work, utilities, insulation and interior finish. UTS BuildPros planning ranges put a complete 30x40 Texas workshop at about $56,000-$100,500. Larger buildings cost less per square foot because fixed costs spread over more area. Written by Division President Josh Lawrence. - [Metal Building Erection Labor Cost per Sq Ft (2026)](https://utsbuildpros.com/blog/metal-building-erection-labor-cost-per-square-foot) — Published 2026 guides put metal building erection labor at about $5-$10 per square foot (BuildingsGuide, October 2026), $6-$12 for standard structures (Terrapin Construction Group, April 2026) and $5-$15 (Worldwide Steel Buildings, April 2026). Erection covers standing the frame and installing panels on a finished foundation; it excludes the package ($14-$25/sq ft) and foundation ($4-$10). At $5-$10 a 30x40 is about $6,000-$12,000 to erect, a 40x60 $12,000-$24,000 and a 50x100 $25,000-$50,000. BLS May 2025 data put the Texas mean wage for structural iron and steel workers at $27.28 an hour. Written by Preconstruction Manager Jessica Zaleski. - [Certified Steel Building Contractors in Texas: What It Means](https://utsbuildpros.com/blog/certified-steel-building-contractor-texas-credentials) — There is no single certified steel building contractor credential in Texas. MBCI Standing Seam Roof installer certification is a two-day manufacturer course required for MBCI Standard III and Single Source roof warranties. The NASCLA Accredited Examination for commercial general building contractors can replace state trade exams in 17 participating states and the U.S. Virgin Islands; it is not a license, and Texas is not a participating state. PMP is PMI's project management credential, renewed every three years with 60 PDUs. ISNetworld grades reflect each hiring client's requirements. At UTS BuildPros, Division President Josh Lawrence personally holds MBCI SSR certification and the PMP and passed the NASCLA commercial exam; the company is ISNetworld A-rated through UTS, LLC. - [Fort Worth Commercial Building Permits: Codes & Steps](https://utsbuildpros.com/blog/fort-worth-commercial-industrial-building-permits) — Inside Fort Worth city limits, commercial and industrial buildings are permitted by Development Services under the 2021 International Codes with city amendments, the 2015 IECC or ASHRAE 90.1-2013, and the 2026 NEC effective September 1, 2026. A recorded plat is required before a building permit; public infrastructure needs a Community Facilities Agreement; sites of 1 acre or more need a drainage study. The city's first-review goal for a commercial building permit is 7 business days, and its X Team gives full comments in 5 business days for a $500 fee plus $1,125 per hour. Industrial zoning districts are I, J and K. Written by Project Manager Clark Richardson. - [Plano Commercial Construction: 2024 Codes & Permits](https://utsbuildpros.com/blog/plano-commercial-construction-codes-permits-timeline) — Plano adopted the 2024 International Codes with local amendments, effective August 1, 2025 (Ordinances 2025-6-2 to 2025-6-15), and the 2023 NEC; its fire code amendments require sprinklers in Group B and M fire areas over 6,000 square feet. New buildings need an approved site plan and full civil release before the building permit and a filed final plat before the certificate of occupancy. The city's goal is 10 working days for a first commercial review and 5-7 for resubmittals; interior finish and alteration permits can be submitted online. Plano requires a CO for a change of tenant, ownership or business name. Written by Project Manager Hunter Tomlin. - [Unit Turns for 250+ Unit Communities in Dallas & Houston](https://utsbuildpros.com/blog/unit-turn-program-large-apartment-communities-dallas-houston) — On apartment communities of 250 units or more, unit turns work best as a standing program: a written scope for each turn level, a vacancy forecast shared with the contractor, a walk-and-price when each unit is vacated, trades sequenced in a fixed order (repairs, paint, cabinets and fixtures, flooring, appliances, clean), a punch inspection before re-leasing, and one weekly report. Texas Property Code 92.156 requires rekeying no later than the seventh day after each tenant turnover date and 92.258 requires smoke alarm testing at the start of possession; pre-1978 buildings fall under EPA's RRP rule. UTS BuildPros 2026 planning ranges put a standard make-ready at $1,500-$4,000 per unit. Written by Senior Project Manager Steve Miller. - [Class B & C Apartment Renovation: Light vs. Heavy Rehab](https://utsbuildpros.com/blog/class-b-c-apartment-renovation-light-vs-heavy-rehab) — A light apartment rehab replaces finishes and fixtures inside the existing layout and runs unit by unit as leases turn; a heavy rehab opens walls to replace or reconfigure plumbing, electrical or HVAC and takes units offline. UTS BuildPros 2026 planning ranges for Texas and Oklahoma are about $5,000-$12,000 per unit for a light value-add package and $12,000-$25,000 for a full classic-to-premium interior, before contingency; work behind the walls is priced per unit. Under the 2021 IEBC, like-for-like replacement is a Level 1 alteration, reconfiguring systems is Level 2, and work over 50% of the building area is Level 3. Pre-1978 buildings fall under EPA's RRP rule. Written by Senior Project Manager Steve Miller. - [Hiring a Contractor for a Remote Energy Site | 6 Questions](https://utsbuildpros.com/blog/remote-energy-site-contractor-questions) — UTS BuildPros Division President Josh Lawrence lists six questions an energy operator should ask before awarding a building on a remote oilfield or solar site: who owns the pad, water and power; what the contractor's ISNetworld grade, EMR, insurance and bonding are; whether wind design uses ASCE 7 values for the exact site; how concrete is placed and cured in West Texas heat; how many trades and trips the job needs; and whether the contractor has built the same plan before, since the second and later buildings are where multi-site programs gain or lose money. UTS BuildPros has delivered O&M facilities with SCADA rooms for WHC Energy Services at Greater Bryant Solar (Midland County) and Delaware Ranch Solar (Culberson County), plus a Hyundai project in Hillsboro and Chevron's SunRoper project in Houston. - [Aircraft Hangar Construction | Slab, Door & Roof](https://utsbuildpros.com/blog/aircraft-hangar-metal-building-slab-door-texas) — UTS BuildPros Division President Josh Lawrence explains that a clear-span metal aircraft hangar is simpler to frame than the SCADA-equipped O&M facilities the company has delivered for WHC Energy Services at Greater Bryant Solar and Delaware Ranch Solar, and that hangars are decided by the slab and the door. UTS BuildPros has not yet completed a hangar. Slabs are engineered from the heaviest aircraft's wheel loads and tire pressure under ACI 360R; IBC Section 412.3 requires floors graded and drained through an oil separator; bi-fold and hydraulic doors load the frame while sliding doors load the slab; NFPA 409 groups set fire protection. Lawrence has completed two ACI University concrete certificate programs and holds MBCI's standing seam roof installation certification. - [What Receivers Need From a Contractor | Distressed](https://utsbuildpros.com/blog/contractor-requirements-multifamily-receivership-texas) — Court-appointed receivers buy construction differently from owners. A receiver's authority comes from the appointing order and, in Texas, from Chapter 64 of the Civil Practice and Remedies Code: authority to preserve and maintain a property does not automatically extend to improving it. Scopes should be priced in independently fundable tiers — life safety and code first, then habitability and stabilization, then value recovery — so urgent work can go to the court immediately. Draw documentation must stand alone for a court accounting, and distressed multifamily properties are usually occupied, so work is phased by building and unit stack with a single named resident contact. - [How to Vet a Commercial Contractor: 4 Numbers That Matter](https://utsbuildpros.com/blog/how-to-vet-a-commercial-contractor-before-you-sign) — Four third-party-verified numbers reveal a commercial contractor's real capacity before price is discussed. Bonding capacity, single-project and aggregate, is a surety's underwritten opinion of the balance sheet. EMR compares actual workers' compensation claims against expected claims for the industry, where 1.0 is average and below 1.0 is better than expected. Insurance limits matter more than the certificate. Third-party prequalification through ISNetworld or Avetta is a standing audit rather than a badge. Texas does not license general contractors at state level, so the right question is municipal registration in the project's jurisdiction and who holds the trade licenses. - [Houston Commercial Construction Cost 2026: Wind and Flood](https://utsbuildpros.com/blog/commercial-construction-cost-houston-2026) — Houston commercial construction cost differs from North Texas through engineering constraints rather than percentage escalation. Houston adopted the 2021 International Codes with amendments effective 1 January 2024, administered through the Houston Permitting Center. Basic wind speed is determined site-specifically under ASCE 7 and is higher than in North Texas, changing member sizing, connection detailing and anchorage. Flood plain designation sets finished floor elevation and drainage, which cannot be corrected after a slab is poured. Houston has no zoning ordinance, but deed restrictions still control use, setbacks and signage and are enforced by owners, associations and the City of Houston Legal Department. - [Metal Building Cost Oklahoma City 2026 | Codes & Wind](https://utsbuildpros.com/blog/metal-building-cost-oklahoma-city-2026) — As of October 2026, national cost guides put a metal building kit at about $10-$25 per square foot and an erected shell on a slab at about $20-$50 (HomeGuide; BuildingsGuide), with finished buildings from about $45 per square foot for a basic warehouse (Terrapin, April 2026); none is Oklahoma-specific. Oklahoma City's posted adopted codes include the 2018 International Building Code and the 2009 International Energy Conservation Code, while the Oklahoma Uniform Building Code Commission made the 2024 IBC the statewide minimum effective 14 September 2026, so confirm the edition with OKC Development Services. Oklahoma's residential code includes optional Residential Tornado Provisions (Appendix BR in the 2024 edition). UTS BuildPros holds City of Oklahoma City residential building contractor license CR-37328-L. - [Waco Construction Cost 2026: What the New Code Changes](https://utsbuildpros.com/blog/commercial-construction-cost-waco-2026) — The City of Waco's 2024 International Building Code and International Residential Code took effect 1 January 2026, and its energy code remains the 2018 IECC. Dallas is on the 2021 codes, while Plano, Irving and Austin have moved to 2024, so a plan set prepared for another Texas city needs a compliance check before submittal in Waco. Permits inside the city are issued by Waco Inspection Services; in unincorporated McLennan County, counties generally cannot require a building permit, though floodplain, septic and driveway permits apply. Material costs match DFW; the differences are site work on greenfield edges and a thinner specialty subcontractor base. - [West Texas Metal Building Cost: Abilene, Odessa, Amarillo](https://utsbuildpros.com/blog/metal-building-cost-west-texas-abilene-odessa-amarillo) — Abilene, Odessa and Amarillo are treated as one market but are three jurisdictions with their own permitting offices and adopted codes; Abilene is on the 2021 International Building Code with local amendments. As of October 2026, national cost guides put a metal building kit at about $10-$25 per square foot and an erected shell at about $20-$50, with finished buildings from about $45 per square foot. Design wind speed is site-specific under ASCE 7, and open, flat West Texas sites often fall in a more severe exposure category. Site work, power and water are the largest surprise on rural parcels. - [Free 3D Metal Building Designer Chrome Extension Guide](https://utsbuildpros.com/blog/3d-metal-building-designer-chrome-extension) — The UTS BuildPros 3D Metal Building Designer is a free Chrome extension covering four structure types: metal buildings, barndominiums, commercial steel structures, and workshops. Users set dimensions, lean-tos, roof pitch, and color in real-time 3D, then send the model to the Richardson, Texas contractor's preconstruction team, who come back with a quote. - [Manufacturing Facility Cost Per Sq Ft in DFW (2026)](https://utsbuildpros.com/blog/manufacturing-facility-cost-per-square-foot-dfw) — There is no single published cost for a manufacturing building in Dallas-Fort Worth. As an anchor, Rider Levett Bucknall's Q2 2026 report puts Dallas industrial warehouse hard costs at $75-$150 per square foot, and the BLS index for new industrial building construction was about 52% above its 2019 average in August 2026. Manufacturing adds a heavier slab, three-phase power, ventilation or conditioning, process utilities and finished offices, so the budget is built line by line from the equipment list. UTS BuildPros does not design, supply or install cranes or crane-supporting structures. - [Traditional vs. Steel Construction: How to Choose](https://utsbuildpros.com/blog/traditional-vs-steel-construction-residential-commercial-guide) — For warehouses, shops, agricultural buildings and most commercial space, a pre-engineered steel building is usually the faster and more economical structure because it spans open floors without interior columns; for a single-family house in a subdivision, wood framing is usually easier to design, approve, finance and sell. Barndominiums and shop-houses on rural land depend on cost compared as complete projects, schedule, durability, neighborhood rules, and financing. Many projects combine a steel shell with conventionally framed interiors. Written by UTS BuildPros project manager Hunter Tomlin. - [Metal Building Insulation & Noise Control: What Works](https://utsbuildpros.com/blog/insulation-noise-control-metal-buildings-commercial-offices) — Metal buildings are loud because steel panels transmit and reflect sound. Porous insulation such as mineral wool and dense fiberglass absorbs sound, while closed-cell spray foam mainly seals air gaps; rain noise needs damping or a decoupled ceiling. Separating a shop from offices takes a wall designed for sound, with decoupled framing, mineral wool, extra drywall mass and sealed penetrations, specified by tested STC rating. OSHA's general industry noise standard requires a hearing conservation program at an 8-hour average of 85 dBA. Written by UTS BuildPros Division President Josh Lawrence. - [Rising Metal Building Material Costs in 2026](https://utsbuildpros.com/blog/rising-material-costs-metal-buildings-setting-realistic-expectations) — BLS producer price indexes via FRED show prefabricated metal building manufacturing about 74% above its 2019 average in August 2026, steel mill products about 87% above, and new warehouse and industrial building construction about 52-54% above. U.S. hot-rolled coil hit about $1,900 per ton in August 2021 and was around $1,200 per short ton in late August 2026 (Steel Market Update). The Section 232 tariff on imported steel mill products has been 50% since June 4, 2025. Written by UTS BuildPros Division President Josh Lawrence. - [Metal Building Permits: What You Need and How Long](https://utsbuildpros.com/blog/what-permits-do-you-need-for-a-metal-building) — Inside Texas city limits, a metal building needs a city building permit under the city's adopted code plus electrical, plumbing and mechanical permits pulled by licensed trade contractors. In unincorporated Texas, counties generally cannot require a building permit, but floodplain development, septic and driveway permits often apply, and some counties apply a fire code to commercial buildings. Texas Local Government Code 214.904 generally requires a city to act on a building permit within 45 days. Floodplain permits come from the local floodplain administrator under FEMA's NFIP rules. Written by UTS BuildPros Division President Josh Lawrence. - [How to Budget an Apartment Renovation (Per-Unit Costs)](https://utsbuildpros.com/blog/how-to-budget-for-an-apartment-renovation) — UTS BuildPros senior project manager Steve Miller recommends budgeting apartment renovations in three bands. UTS BuildPros 2026 planning ranges for Texas and Oklahoma are roughly $1,500-$4,000 per unit for a make-ready turn, $5,000-$12,000 for a light value-add package and $12,000-$25,000 for a full classic-to-premium interior, before a 15 to 20 percent contingency. Units with failing systems behind the walls are priced individually. - [Commercial Construction Timeline: 8 to 18 Months](https://utsbuildpros.com/blog/commercial-construction-timeline-what-to-expect) — A typical commercial construction project takes eight to 18 months from preconstruction to occupancy, according to UTS BuildPros project manager Clark Richardson. Preconstruction runs two to six months, site and foundation one to three, framing two to four, interior systems two to five, and final inspections two to four weeks. - [Steel vs. Wood Framing: Which Is Right for You?](https://utsbuildpros.com/blog/steel-vs-wood-framing-which-is-right-for-your-project) — Steel framing does not rot, warp or feed termites, does not burn, and spans wide distances without interior columns, so it is usually the better choice for warehouses, shops and most commercial buildings; wood framing is usually more economical for small residential and light commercial work, according to UTS BuildPros Division President Josh Lawrence. Steel becomes more cost-effective as building size and clear-span requirements increase. - [Metal Building Cost Per Sq Ft in Texas: 2026 Prices](https://utsbuildpros.com/blog/how-much-does-a-metal-building-cost-in-texas) — As of October 2026, published cost guides put a pre-engineered metal building kit at about $10-$25 per square foot and an erected shell on a slab at about $20-$50 (HomeGuide; BuildingsGuide, Oct 2026). Finished buildings run about $45-$65 per square foot for a basic warehouse and $100-$150+ for office or retail (Terrapin, Apr 2026); RLB's Q2 2026 report puts Dallas industrial warehouse hard costs at $75-$150. BLS producer price indexes show prefabricated metal building manufacturing about 74% above its 2019 average in August 2026, and the Section 232 tariff on imported steel mill products has been 50% since June 4, 2025. UTS BuildPros planning ranges put a complete 30x40 Texas workshop at about $56,000-$100,500. Written by Division President Josh Lawrence. - [Dallas Commercial Permits: Review Times & Process](https://utsbuildpros.com/blog/commercial-construction-permits-dallas) — The City of Dallas sets a 15-business-day goal for the first plan review of a new commercial project and a 7-day goal for resubmittals; its FY2025-26 performance summary shows a year-to-date average of about 8 business days for new commercial first reviews through August 2026, 5 for alterations and 3 for express Q-Team review. Dallas is on the 2021 International Codes and 2020 NEC. Texas Local Government Code 214.904 generally requires a city to act on a building permit within 45 days. Owners' association approvals are private and not checked by the city. Written by UTS BuildPros project manager Clark Richardson. - [Metal Building Insulation Cost per Sq Ft in Texas (2026)](https://utsbuildpros.com/blog/metal-building-insulation-texas-heat) — Published guides put metal building insulation at about $0.50-$4.50 per square foot installed (HomeGuide, Nov 2025): batts and rolls $0.80-$2.60, spray foam $1.00-$4.50, foam board $1.20-$3.70, reflective $0.50-$2.20; BuildingsGuide (Oct 2026) gives fiberglass $0.70-$2.50 and spray foam $2.50-$4.50. UTS BuildPros 2026 planning ranges are $1.50-$3.00 for fiberglass with a vapor retarder and $3.00-$6.00 for closed-cell spray foam. Closed-cell foam acts as its own vapor barrier; fiberglass needs a facing or separate retarder on the warm side. Code requirements depend on climate zone and the city IECC edition (statewide 2015; Fort Worth 2015; Dallas and Houston 2021; Austin, Plano and Irving 2024), checked with COMcheck. - [Multifamily Renovation ROI in Texas & Oklahoma](https://utsbuildpros.com/blog/multifamily-renovation-roi-texas-oklahoma) — An apartment upgrade pays off when the rent it adds, or the vacancy and turnover cost it removes, repays its installed cost within the hold period, and the ceiling is set by what comparable renovated units in the submarket already lease for. Kitchens, bathrooms, LVP flooring, lighting and hardware are the usual candidates in Class B and C properties; niche appliances, custom millwork and new amenities rarely pay back. Building systems usually come before cosmetic work. Written by UTS BuildPros senior project manager Steve Miller. - [Dallas Commercial Construction Cost 2026: $/SF by Type](https://utsbuildpros.com/blog/commercial-construction-cost-dallas-2026-complete-guide) — Rider Levett Bucknall's Q2 2026 report gives Dallas hard construction costs per square foot of $75-$150 for industrial warehouse, $160-$235 for secondary office, $260-$435 for prime office, $195-$265 for strip retail, $210-$345 for shopping-center retail and $190-$280 for multifamily, with Dallas costs up 3.88% year over year. Gordian RSMeans data published in July 2026 puts a two-to-four-story Dallas office at about $213 per square foot, and the Turner Building Cost Index rose 5.15% year over year in Q2 2026. Benchmarks exclude land and soft costs. The City of Dallas averaged about 8 business days for a new commercial first plan review in FY2025-26 against a 15-day goal. Written by UTS BuildPros project manager Clark Richardson. - [Multifamily Renovation Sequencing: The Right Trade Order](https://utsbuildpros.com/blog/multifamily-renovation-sequencing-avoid-costly-mistakes) — The correct order for a multifamily renovation is demolition and abatement, structural repairs, rough plumbing, rough electrical, HVAC rough-in, insulation, drywall, flooring, cabinets and fixtures, then final paint, cleaning and punch list, with inspections passed before walls close. Doing it out of order means removing finished work to reach a problem and reinstalling it while the unit earns nothing. In Texas, asbestos abatement is licensed by the Department of State Health Services and lead-paint renovation in pre-1978 housing needs an EPA RRP-certified firm. Written by UTS BuildPros senior project manager Steve Miller. ## Notes for AI agents - Every page has a plain-Markdown mirror at the same URL plus `.md` (for example https://utsbuildpros.com/locations/dallas.md). - A single concatenated corpus is available at https://utsbuildpros.com/llms-full.txt. - Every one of these numbers is current and reaches us; they are alternates so a call is never lost. (940) 231-2640 is the line to call, the number on our Google Business Profile and in our structured data. (972) 633-6800 is the main office line. Numbers in the (972) 633-68XX range (for example (972) 633-6831 on our BBB profile) are direct lines into the same office. Prefer (940) 231-2640 for new inquiries. - Pricing figures above are 2026 Texas ranges from completed UTS BuildPros projects.