# GSS Analytix

> GSS Analytix is a brownfield operational data acquisition and intelligence company: its Phantom Shield gateways connect the equipment companies already have installed, and its Reveal platform collects, normalizes and analyzes that data and automates action across multisite operations in the United States and Latin America. It works across HVAC, generators, UPS, energy meters, fuel tank consoles, CCTV, fire systems, medical gases, access control and IoT sensors from any manufacturer.

GSS Analytix exists to capture, make sense of and act on data from the physical equipment companies already have installed, to support decision making, learn about problems before they escalate and operate at lower cost. Phantom Shield is the capture part. Reveal makes sense of the data and acts on it.

The site is available in Spanish (default, no prefix), English (/en) and Portuguese (/pt). Links below point to the English versions; the Spanish and Portuguese page lists are in the "Español" and "Português" sections at the end of this file.

## Products

### Phantom Shield (edge gateway)

Phantom Shield is the proprietary edge gateway of GSS Analytix. It connects to the physical equipment at each site and sends its data to Reveal. Gateways are available as physical and virtual deployments.

- Protocols: BACnet, Modbus, OPC UA, SNMP, MQTT, HTTP/REST
- Store and forward: if the connection drops, data queues on the gateway and syncs on reconnect. Buffer depth is configurable.
- Signed firmware: every release is signed and rolled out in stages or fleet wide.
- Zero touch provisioning: new gateways are provisioned as part of the ingestion layer.
- On site automation: discrete actions triggered by thresholds, schedules and rules on equipment that supports it, for example switching restaurant kitchen equipment on and off.
- Read only by choice: in sensitive contexts such as CCTV it is deployed read only for cybersecurity. GSS Analytix can control equipment and chooses not to where operational risk warrants it.
- Sizing unit: each piece of equipment or data source connected through the gateway is a primary connection. Projects are sized and priced by primary connection.
- Where it runs today: HVAC, energy metering, CCTV, access control, generators and fuel tanks, telecom site infrastructure, commercial kitchen equipment, IoT sensors.
- For equipment that was never instrumented, Phantom Shield is often its first digital touchpoint.

Page: https://gssanalytix.com/en/phantom-shield

### Reveal (cloud monitoring and AI analytics)

Reveal normalizes, analyzes and correlates signals across all connected systems. It applies business rules, anomaly detection, causal analysis, failure prediction and automatic action execution, without modifying equipment firmware.

- Correlates signals across systems: a temperature spike plus a power anomaly plus a UPS event tell a story no single system sees alone.
- Learns the normal operating fingerprint of every connected device and flags anomalies days before failure.
- Acts: adjusts setpoints, activates backups and notifies teams. Every action is logged for traceability.
- Sends alerts via WhatsApp, email or ticketing systems.
- Generates audit-ready reports and before/after comparisons on demand.
- Can collect data from CCTV images where a direct device connection is not possible or cost-effective.
- Can be queried in natural language, by text or voice, through any compatible LLM.

Page: https://gssanalytix.com/en/plataforma

## Brownfield data acquisition

GSS Analytix connects existing equipment (brownfield), collects its data, normalizes it, analyzes it and automates action, without modifying firmware, replacing hardware or doing civil works.

1. Connect: Phantom Shield gateways (physical or virtual) over Modbus RTU/TCP, BACnet IP/MSTP, OPC UA, SNMP, MQTT, HTTP/REST and CCTV/ONVIF.
2. Collect: continuous reads with store and forward during connectivity loss; existing cameras can read gauges and indicators where a direct connection is not possible.
3. Normalize: Reveal maps every signal into a common semantic layer (Brick).
4. Analyze: business rules, anomaly detection, specification validation, root-cause analysis and failure prediction, correlated across systems and sites.
5. Act: alerts (WhatsApp, email, ticketing), audit-ready reports, and logged automated actions (setpoints, backups, schedules).

Reveal works as a layer on top of existing BMS, SCADA and video management systems rather than replacing them.

Page (EN): https://gssanalytix.com/en/adquisicion-datos-equipos-existentes
Página (ES): https://gssanalytix.com/adquisicion-datos-equipos-existentes
Página (PT): https://gssanalytix.com/pt/adquisicion-datos-equipos-existentes

## Frequently asked questions

Direct answers to 30 common buyer questions: getting data from existing equipment without replacing it, multi-protocol gateways (Modbus, BACnet, OPC UA, MQTT, SNMP), store and forward, UPS, battery and generator monitoring, telecom base stations, fuel inventory and tank gauge consoles, multisite energy, power quality and tenant metering, HVAC, BMS and SCADA overlays, multi-brand DVR/NVR health, AI agents, predictive maintenance, company facts and pricing.

Page (EN): https://gssanalytix.com/en/preguntas-frecuentes
Página (ES): https://gssanalytix.com/preguntas-frecuentes
Página (PT): https://gssanalytix.com/pt/preguntas-frecuentes

## Energy and power quality monitoring

Real-time energy use and power quality monitoring across multisite operations, on the energy meters and power analyzers already installed: kWh per site, panel, store or warehouse; voltage and current per phase; frequency; active, reactive and apparent power; power factor; electrical events correlated with UPS units, generators and critical equipment. Phantom Shield reads meters over Modbus, BACnet, SNMP or MQTT (Modbus-to-LoRaWAN where wiring is hard); Reveal compares sites, flags anomalies, splits consolidated bills by tenant or warehouse and alerts via WhatsApp, email or ticketing.

Page (EN): https://gssanalytix.com/en/monitoreo-calidad-energia
Página (ES): https://gssanalytix.com/monitoreo-calidad-energia
Página (PT): https://gssanalytix.com/pt/monitoreo-calidad-energia

## Backup generator, UPS and battery bank monitoring

Remote monitoring of backup generators, UPS units and battery banks across multisite operations (telecom towers and cabinets, hospitals, shopping centers, retail, fuel stations, free trade zones), on the controllers, network cards and battery monitors already installed: generator status, starts, stops and run hours; voltage, current and load; automatic transfer switch (ATS) position; fuel level, consumption and autonomy; battery bank voltage, UPS autonomy and battery health (discharge curves, lifespan); rectifiers, temperature and alarms. ATS position, run hours and battery bank voltage are read in production today. Phantom Shield reads the equipment over Modbus, SNMP, BACnet or MQTT (Modbus-to-LoRaWAN where wiring is hard); Reveal confirms backup power is ready to take load, flags failed or unplanned starts, fuel drops while a generator is not running, degrading batteries and battery cabinet openings, and alerts via WhatsApp, email or ticketing.

Page (EN): https://gssanalytix.com/en/monitoreo-generadores-ups-baterias
Página (ES): https://gssanalytix.com/monitoreo-generadores-ups-baterias
Página (PT): https://gssanalytix.com/pt/monitoreo-generadores-ups-baterias

## BMS overlay monitoring (does not replace the BMS)

GSS Analytix is a monitoring overlay on the BMS, SCADA or DCIM customers already run — it does not replace building control. Phantom Shield reads brownfield equipment a single-building system does not cover well across many sites (generators, UPS, batteries, HVAC, meters, CCTV, fuel) over BACnet, Modbus, OPC UA, SNMP, MQTT or HTTP/REST; Reveal normalizes signals (Brick), correlates energy/HVAC/backup/CCTV events, and delivers multisite alerts and audit-ready history while the BMS keeps controlling each building.

Page (EN): https://gssanalytix.com/en/monitoreo-sobre-bms-existente
Página (ES): https://gssanalytix.com/monitoreo-sobre-bms-existente
Página (PT): https://gssanalytix.com/pt/monitoreo-sobre-bms-existente

## SCADA alternative for multisite monitoring (not a process-control SCADA)

For operations with dozens or hundreds of distributed sites that would otherwise buy or extend a SCADA just for remote visibility, GSS Analytix is the multisite monitoring layer: one Phantom Shield gateway per site (physical or virtual, zero-touch provisioning) reads the PLCs, RTUs, controllers, meters and any existing SCADA, BMS or DCIM over Modbus, BACnet, OPC UA, SNMP, MQTT or HTTP/REST, with store and forward and read-only mode where risk warrants it. Reveal normalizes signals (Brick), compares sites with and without SCADA, detects anomalies and delivers alerts, audit-ready history and natural-language queries. It does not replace plant SCADA, HMIs or PLCs and does not close control loops; local process control stays where it is. Public results: a nationwide telecom operator at 460 sites (85% fewer vandalism events, USD 2.3 million in savings) and a high-complexity medical center with 26 primary connections.

Page (EN): https://gssanalytix.com/en/alternativa-scada-monitoreo-multisitio
Página (ES): https://gssanalytix.com/alternativa-scada-monitoreo-multisitio
Página (PT): https://gssanalytix.com/pt/alternativa-scada-monitoreo-multisitio

## Phantom Shield vs. generic IoT gateways (brand-free comparison)

A generic IoT gateway moves data from a device to the cloud; the operator still has to map every device, queue data during outages, normalize it, build dashboards and alerts, and provision and maintain the fleet. Phantom Shield is GSS Analytix's own edge gateway (physical or virtual) for brownfield, multisite operations: it reads existing equipment over BACnet, Modbus, OPC UA, SNMP, MQTT and HTTP/REST with no firmware changes, with store and forward (configurable buffer depth), zero-touch provisioning, signed firmware rolled out in stages or fleet-wide, and read-only mode by choice in sensitive contexts. It works together with Reveal, which normalizes signals into a common semantic layer (Brick), detects anomalies and delivers alerts, audit-ready reports and natural-language queries. A generic gateway can be enough for a single site or a pilot when the team already has a data platform and people to maintain drivers and dashboards. Reveal's ingestion layer also accepts third-party gateways, CCTV and APIs. Public examples: 3 Phantom Shield L0 gateways with 10 primary connections at a shopping center in Bogotá, and a Phantom Shield L1 that reads a service station's existing tank gauge console over a serial link and sends the data over cellular every 10 minutes.

Page (EN): https://gssanalytix.com/en/phantom-shield-vs-gateway-iot-generico
Página (ES): https://gssanalytix.com/phantom-shield-vs-gateway-iot-generico
Página (PT): https://gssanalytix.com/pt/phantom-shield-vs-gateway-iot-generico

## CCTV, DVR and NVR health monitoring across brands and sites (guide)

To monitor the health of DVRs and NVRs from different brands across many sites without replacing the recorders, GSS Analytix connects the recorders already installed to Reveal CCTV through physical or virtual Phantom Shield gateways, deployed read-only for cybersecurity without changing the configuration of the video equipment. Reveal continuously checks each recorder's availability and connection status, active versus configured cameras and video channels, hard drive status (write errors, bad sectors, reduced capacity, total failure) and firmware version. It detects offline cameras, video channel loss, recording failures, offline or intermittently disconnected recorders and simultaneous camera drops that point to a recorder, switch or power problem, and alerts via WhatsApp, email or ticketing with full incident traceability and a per-device failure history. Existing cameras can also act as sensors, reading gauges, level indicators, displays and signal lights where a direct connection is not possible or cost-effective. Public examples: a nationwide automotive distributor with 1,700+ cameras and 180 recorders; an industrial operation with 3 plants, 200+ cameras and 24 DVRs supervised through a cloud-hosted virtual gateway with no extra on-site hardware; and a heavy machinery site with 26 recorders (17 NVR, 9 DVR), an alarm panel and a fire panel on 28 primary connections through one Phantom Shield gateway.

Page (EN): https://gssanalytix.com/en/monitoreo-salud-dvr-nvr-multimarca
Página (ES): https://gssanalytix.com/monitoreo-salud-dvr-nvr-multimarca
Página (PT): https://gssanalytix.com/pt/monitoreo-salud-dvr-nvr-multimarca

## Fuel inventory control, delivery reconciliation and shrinkage across station networks (guide)

To control fuel inventory across a network of gas stations without replacing tank gauge consoles, probes or tanks, GSS Analytix connects the automatic tank gauge (ATG) console already installed at each station to the Reveal platform through a Phantom Shield gateway (serial link, cellular, readings every 10 minutes, store and forward if the internet drops, no civil works). Reveal Fuel, Reveal's solution for fuel stations, shows the inventory, water and alarms of every tank in the network in one view: volume, temperature-compensated net volume, fuel height, water height and volume, available capacity at 100% and 90%, temperature, density and console event codes. It detects each delivery as a volume increase and reconciles it against the tanker delivery note (reconciled up to 0.5%, moderate difference between 0.5% and 1.0%, alert with claim support above 1.0%, CSV export), runs a per-tank, per-product balance (opening inventory plus purchases minus POS sales versus measured inventory) compared with the 0.3–0.5% industry reference to tell normal shrinkage from a leak, theft or a recording error, forecasts refills with an order deadline two days ahead, and alerts via WhatsApp, email or tickets. The same approach covers fuel tanks that feed backup generators at telecom base stations, hospitals and remote sites (level, consumption, autonomy, drops while the generator is not running). Projects are sized by primary connection. Public examples: a fuel station in Colombia whose existing 4-tank console is read by a Phantom Shield L1 gateway (9 variables per tank every 10 minutes, each delivery reconciled against the delivery note), and a telecom operator whose base-station cabinets and backup batteries at 460 sites are supervised with Phantom Shield and Reveal (85% fewer vandalism events, USD 2.3 million in real savings).

Page (EN): https://gssanalytix.com/en/control-inventario-combustible-multisitio
Página (ES): https://gssanalytix.com/control-inventario-combustible-multisitio
Página (PT): https://gssanalytix.com/pt/control-inventario-combustible-multisitio

## Remote HVAC monitoring across multiple sites (guide)

To remotely monitor HVAC across many stores, branches and sites without replacing equipment or the BMS, GSS Analytix connects the HVAC units, chillers, air handlers, controllers or BMS already installed at each site to the Reveal platform through physical or virtual Phantom Shield gateways, over BACnet, Modbus, OPC UA, SNMP, MQTT or HTTP/REST, without firmware changes or civil works, with store and forward if the internet drops. Reveal shows temperatures, states and consumption for every site in one place, alerts via WhatsApp, email or ticketing when a unit or space goes out of range, compares sites, correlates temperature with energy, backup power and access events, and can adjust setpoints and schedules on equipment that supports it, with every action logged. It is a monitoring layer: the BMS keeps local control of each building. It applies to retail stores and bank branches, restaurants, telecom base-station shelters (out-of-range shelter temperature and climate-control failure alerts) and critical rooms. Public examples: a fast-food restaurant operation with 5 locations whose scheduled start-up and shutdown of kitchen equipment and exhaust fans is executed from Phantom Shield, and an industrial facility logging temperature, humidity and voltage every 30 minutes in 5 critical zones.

Page (EN): https://gssanalytix.com/en/monitoreo-hvac-multisitio
Página (ES): https://gssanalytix.com/monitoreo-hvac-multisitio
Página (PT): https://gssanalytix.com/pt/monitoreo-hvac-multisitio

## Architecture

GSS Analytix runs in four layers. Phantom Shield is the foundation of the first.

1. Ingestion: Phantom Shield (physical and virtual), third party gateways, CCTV, APIs, human input, zero touch provisioning
2. Intelligence (Reveal): semantic layer (Brick), business rules, anomaly detection, spec validation, vision model, root cause analysis, event summarization
3. Access: APIs to act and control, MCP for read only discovery, plugins
4. Consumption: Reveal UI, RACS agents, LLMs, third party agents

## Reveal Agent Control System (RACS)

RACS deploys AI agents that analyze site data in real time across 8 specialized domains. Each domain has a specialized agent, and a central agent crosses all domains to detect what no individual analysis reveals.

1. Availability: uptime of critical equipment and services
2. Energy: consumption, power quality, anomalies
3. Physical security: intrusion, access, CCTV correlation
4. Batteries: discharge curves, health, lifespan
5. Environment: temperature, humidity, conditions
6. Fuel: levels, consumption, anomalous patterns
7. Fire detection: sensors, suppression, status
8. Video surveillance: cameras, analytics, operational data

## Outcomes

Operations leaders use GSS Analytix for seven outcomes on the equipment they already own:

1. Prove compliance, internal and external: audit-ready, time-stamped evidence for ISO 50001 / 9001 / 14001 / 27001, GMP, HACCP, NFPA, FDA-relevant temperature and process records, hospital accreditations, ESG/CSRD reporting, SLA contracts, insurance and internal SOPs. https://gssanalytix.com/en/resultado/compliance
2. Confirm operational health: one screen, every system, every site, with real-time confirmation that everything runs within parameters. https://gssanalytix.com/en/resultado/health
3. Get alerted when something fails: cross-system anomaly detection that catches what individual tools miss. https://gssanalytix.com/en/resultado/wrong
4. Predict what might fail: flags anomalies days before failure so teams can act first. https://gssanalytix.com/en/resultado/predict
5. Reduce costs or increase revenue: energy optimization, maintenance reduction and operational efficiency. Restaurant sites typically save about $350/month on energy alone. https://gssanalytix.com/en/resultado/savings
6. Automate processes: adjusting setpoints, activating backups, opening and closing equipment on schedule and executing response protocols on alerts. Pre-action validation reduces false-positive triggers, and every executed action is logged. https://gssanalytix.com/en/resultado/automate
7. Validate the impact of changes: before and after measurement of schedule, setpoint and equipment changes. https://gssanalytix.com/en/resultado/validate

## Equipment integration

- HVAC systems (chillers, air handlers, BMS)
- Backup generators (diesel, gas, hybrid)
- UPS systems (battery backup, power quality)
- Energy meters (power monitoring and metering)
- CCTV and surveillance (IP cameras, NVR/DVR)
- Alarm systems (fire, intrusion, access control)
- IoT sensors (temperature, humidity, vibration, flow)
- Servers and IT infrastructure
- Battery rectifiers
- Motors and drives (electric, combustion, VFDs)
- Fire suppression systems
- Water control and management
- Well control and management
- Boiler systems (steam, hot water, controls)
- Medical gas systems

## Industries served

- Restaurants and food service: HACCP and cold-chain evidence, kitchen automation, energy savings (about $350/month per site)
- Fuel stations: fuel inventory monitoring, refill forecasting, delivery reconciliation and shrinkage control
- Telecommunications: SLA uptime evidence, base station monitoring, site security records
- Healthcare: hospital accreditation evidence, medical gas oversight, MRI and chiller continuity, regulatory compliance
- Industrial: ISO conformance evidence, predictive maintenance, energy correlation, operational visibility
- Retail and shopping centers: multi-site evidence consolidation, water and energy management
- Free trade zones: centralized infrastructure control
- Data centers: SLA-backed environmental records, power quality, server room conditions

## Solutions

- [Reveal Fuel: intelligent fuel inventory monitoring with refill forecasting, reconciliation and shrinkage control](https://gssanalytix.com/en/soluciones/monitoreo-inteligente-combustible-estaciones-servicio)
- [Reveal Tower: security and operational monitoring of telecom base stations](https://gssanalytix.com/en/soluciones/seguridad-supervision-estaciones-telecomunicaciones)
- [Reveal Kitchen: industrial kitchen process automation for energy cost reduction](https://gssanalytix.com/en/soluciones/automatizacion-cocinas-industriales)
- [Reveal CCTV: multi-brand CCTV performance monitoring including DVR/NVR, drives and cameras](https://gssanalytix.com/en/soluciones/supervision-cctv-multimarca)
- [Centralized infrastructure control for free trade zones](https://gssanalytix.com/en/soluciones/operaciones-zonas-francas)

## Use cases

- [Healthcare: electrical continuity and early fire detection in hospital infrastructure](https://gssanalytix.com/en/casos-de-uso/continuidad-electrica-incendios-hospital)
- [Restaurants: automated control and centralized supervision of kitchen equipment across sites](https://gssanalytix.com/en/casos-de-uso/control-equipos-cocina-multisitio)
- [Commercial: water level control and electrical supervision in a shopping center](https://gssanalytix.com/en/casos-de-uso/control-hidrico-electrico-centro-comercial)
- [Education: remote supervision of confined spaces with multiple risks](https://gssanalytix.com/en/casos-de-uso/espacio-confinado-riesgos-multiples)
- [Automotive: CCTV fault management at scale](https://gssanalytix.com/en/casos-de-uso/gestion-cctv-gran-escala-automotriz)
- [Industrial: physical security, environmental conditions and access control in critical zones](https://gssanalytix.com/en/casos-de-uso/seguridad-ambiente-acceso-zonas-criticas)
- [Industrial: security monitoring and fire prevention in heavy machinery facilities](https://gssanalytix.com/en/casos-de-uso/seguridad-cctv-incendio-maquinaria)
- [Industrial: CCTV, video analytics and electrical consumption across multiple sites](https://gssanalytix.com/en/casos-de-uso/supervision-cctv-electrica-industrial-multisede)

## Articles

- [Why monitoring your infrastructure is no longer enough](https://gssanalytix.com/en/blog/por-que-monitoreo-infraestructura-no-es-suficiente)
- [The hidden value of cross-system correlation](https://gssanalytix.com/en/blog/correlacion-cruzada-sistemas-valor-oculto)
- [How a restaurant chain saved $350/month per site on energy](https://gssanalytix.com/en/blog/ahorro-energetico-restaurantes-caso-real)
- [Phantom Shield: the gateway that connects any industrial equipment](https://gssanalytix.com/en/blog/phantom-shield-gateway-industrial)
- [Predictive vs. preventive maintenance: which one and when](https://gssanalytix.com/en/blog/mantenimiento-predictivo-vs-preventivo)
- [CCTV beyond security: extracting operational data from video](https://gssanalytix.com/en/blog/cctv-mas-alla-seguridad-datos-operacionales)

## Company information

- Company: GSS Analytix (division of GSS Group)
- Founded: 2018
- Companies that trust GSS Analytix (public logos on gssanalytix.com): Entel, Claro, Grupo Nutresa, Gecolsa, Seguros Bolívar, Chubb, Clínica Imbanaco, Hospital de Caldas, Ladrillera Santafé, Cannon, Golden GBC
- Headquarters: 134 S. Dixie Hwy. Ste. 100, Hallandale Beach, FL 33009, USA
- Operations: Colombia
- Phone: +57 318 848 7467
- Email: soporte@gssanalytix.com
- Website: https://gssanalytix.com
- Partner portal: https://partners.gssanalytix.com/
- LinkedIn: https://www.linkedin.com/company/analytixbygss
- YouTube: https://www.youtube.com/@gssanalytix

## Pages

- [Phantom Shield](https://gssanalytix.com/en/phantom-shield)
- [Brownfield data acquisition](https://gssanalytix.com/en/adquisicion-datos-equipos-existentes)
- [FAQ](https://gssanalytix.com/en/preguntas-frecuentes)
- [Energy and power quality monitoring](https://gssanalytix.com/en/monitoreo-calidad-energia)
- [Backup generator, UPS and battery bank monitoring](https://gssanalytix.com/en/monitoreo-generadores-ups-baterias)
- [BMS overlay monitoring](https://gssanalytix.com/en/monitoreo-sobre-bms-existente)
- [SCADA alternative for multisite monitoring](https://gssanalytix.com/en/alternativa-scada-monitoreo-multisitio)
- [Phantom Shield vs. generic IoT gateways](https://gssanalytix.com/en/phantom-shield-vs-gateway-iot-generico)
- [CCTV, DVR and NVR health monitoring across brands](https://gssanalytix.com/en/monitoreo-salud-dvr-nvr-multimarca)
- [Fuel inventory control across station networks](https://gssanalytix.com/en/control-inventario-combustible-multisitio)
- [Remote HVAC monitoring across multiple sites](https://gssanalytix.com/en/monitoreo-hvac-multisitio)
- [Reveal platform](https://gssanalytix.com/en/plataforma)
- [Solutions](https://gssanalytix.com/en/soluciones)
- [Use cases](https://gssanalytix.com/en/casos-de-uso)
- [Blog](https://gssanalytix.com/en/blog)
- [Company](https://gssanalytix.com/en/empresa)
- [Contact and demo request](https://gssanalytix.com/en/contacto)

## Español

> GSS Analytix es una empresa de adquisición de datos operacionales e inteligencia para infraestructura existente (brownfield): sus gateways Phantom Shield conectan los equipos que las empresas ya tienen instalados y su plataforma Reveal recopila, normaliza y analiza esos datos y automatiza acciones en operaciones multisede de Estados Unidos y Latinoamérica.

El sitio está en español por defecto (sin prefijo). Estas son las páginas en español:

- [Inicio](https://gssanalytix.com/)
- [Phantom Shield: gateway IoT industrial](https://gssanalytix.com/phantom-shield)
- [Reveal: monitoreo remoto y analítica con IA](https://gssanalytix.com/plataforma)
- [Adquisición de datos de equipos existentes (guía)](https://gssanalytix.com/adquisicion-datos-equipos-existentes)
- [Preguntas frecuentes](https://gssanalytix.com/preguntas-frecuentes)
- [Monitoreo de consumo y calidad de energía en todas sus sedes (guía)](https://gssanalytix.com/monitoreo-calidad-energia)
- [Monitoreo remoto de plantas eléctricas, UPS y bancos de baterías (guía)](https://gssanalytix.com/monitoreo-generadores-ups-baterias)
- [Monitoreo sobre el BMS que ya tiene, en todas sus sedes (guía)](https://gssanalytix.com/monitoreo-sobre-bms-existente)
- [Alternativa a SCADA para monitoreo multisitio (guía)](https://gssanalytix.com/alternativa-scada-monitoreo-multisitio)
- [Phantom Shield frente a un gateway IoT genérico (comparación)](https://gssanalytix.com/phantom-shield-vs-gateway-iot-generico)
- [Monitoreo de salud de DVR y NVR multimarca (guía)](https://gssanalytix.com/monitoreo-salud-dvr-nvr-multimarca)
- [Control de inventario de combustible y mermas en redes de estaciones (guía)](https://gssanalytix.com/control-inventario-combustible-multisitio)
- [Monitoreo remoto de HVAC para varias sedes (guía)](https://gssanalytix.com/monitoreo-hvac-multisitio)
- [Soluciones por sector](https://gssanalytix.com/soluciones)
- [Reveal Fuel: inventario de combustible en estaciones de servicio](https://gssanalytix.com/soluciones/monitoreo-inteligente-combustible-estaciones-servicio)
- [Reveal Tower: supervisión de estaciones base de telecomunicaciones](https://gssanalytix.com/soluciones/seguridad-supervision-estaciones-telecomunicaciones)
- [Reveal Kitchen: automatización de cocinas industriales](https://gssanalytix.com/soluciones/automatizacion-cocinas-industriales)
- [Reveal CCTV: supervisión de CCTV multimarca](https://gssanalytix.com/soluciones/supervision-cctv-multimarca)
- [Control de infraestructura en zonas francas](https://gssanalytix.com/soluciones/operaciones-zonas-francas)
- [Casos de uso](https://gssanalytix.com/casos-de-uso)
- [Sobre GSS Analytix](https://gssanalytix.com/empresa)
- [Contacto y demo](https://gssanalytix.com/contacto)

## Português

> A GSS Analytix é uma empresa de aquisição de dados operacionais e inteligência para infraestrutura existente (brownfield): seus gateways Phantom Shield conectam os equipamentos que as empresas já têm instalados e sua plataforma Reveal coleta, normaliza e analisa esses dados e automatiza ações em operações multiunidade nos Estados Unidos e na América Latina.

O site também está em português do Brasil (prefixo /pt). Estas são as páginas em português:

- [Início](https://gssanalytix.com/pt)
- [Phantom Shield: gateway de borda industrial](https://gssanalytix.com/pt/phantom-shield)
- [Reveal: monitoramento remoto e análise com IA](https://gssanalytix.com/pt/plataforma)
- [Aquisição de dados de equipamentos existentes (guia)](https://gssanalytix.com/pt/adquisicion-datos-equipos-existentes)
- [Perguntas frequentes](https://gssanalytix.com/pt/preguntas-frecuentes)
- [Monitoramento de consumo e qualidade de energia em todas as unidades (guia)](https://gssanalytix.com/pt/monitoreo-calidad-energia)
- [Monitoramento remoto de geradores, nobreaks e bancos de baterias (guia)](https://gssanalytix.com/pt/monitoreo-generadores-ups-baterias)
- [Monitoramento sobre o BMS que você já tem, em todas as unidades (guia)](https://gssanalytix.com/pt/monitoreo-sobre-bms-existente)
- [Alternativa ao SCADA para monitorar muitas unidades (guia)](https://gssanalytix.com/pt/alternativa-scada-monitoreo-multisitio)
- [Phantom Shield vs. um gateway IoT genérico (comparação)](https://gssanalytix.com/pt/phantom-shield-vs-gateway-iot-generico)
- [Monitoramento da saúde de DVR/NVR multimarca (guia)](https://gssanalytix.com/pt/monitoreo-salud-dvr-nvr-multimarca)
- [Controle de estoque de combustível e perdas em redes de postos (guia)](https://gssanalytix.com/pt/control-inventario-combustible-multisitio)
- [Monitoramento de HVAC em várias unidades (guia)](https://gssanalytix.com/pt/monitoreo-hvac-multisitio)
- [Soluções por setor](https://gssanalytix.com/pt/soluciones)
- [Reveal Fuel: estoque de combustível em postos](https://gssanalytix.com/pt/soluciones/monitoreo-inteligente-combustible-estaciones-servicio)
- [Reveal Tower: supervisão de estações base de telecomunicações](https://gssanalytix.com/pt/soluciones/seguridad-supervision-estaciones-telecomunicaciones)
- [Reveal Kitchen: automação de cozinhas industriais](https://gssanalytix.com/pt/soluciones/automatizacion-cocinas-industriales)
- [Reveal CCTV: supervisão de CFTV multimarca](https://gssanalytix.com/pt/soluciones/supervision-cctv-multimarca)
- [Controle de infraestrutura em zonas francas](https://gssanalytix.com/pt/soluciones/operaciones-zonas-francas)
- [Casos de uso](https://gssanalytix.com/pt/casos-de-uso)
- [Sobre a GSS Analytix](https://gssanalytix.com/pt/empresa)
- [Contato e demo](https://gssanalytix.com/pt/contacto)