# DigilogElectronics

> Buy Arduino, ESP32, Sensors & Electronic Components Online - Worldwide Shipping


## Posts

- [Mini 3.7 V lithium battery charging plate supports 18650 battery TYPE-C port anti-reverse connection function protection 4-8V](https://digilogelectronics.com/mini-3-7-v-lithium-battery-charging-plate-supports-18650-battery-type-c-port-anti-reverse-connection-function-protection-4-8v/): Mini 3.7 V lithium battery charging plate supports 18650 battery TYPE-C port anti-reverse connection function protection 4-8V
- [Getting Started with the ESP32 Development Board](https://digilogelectronics.com/getting-started-with-the-esp32-development-board/): Getting Started with the ESP32 Development Board   New to ESP32? Start here! The ESP32 is a series of low-cost and low-power System on a Chip (SoC) microcontrollers developed by Espressif that include Wi-Fi and Bluetooth wireless capabilities and dual-core processor. If you’re familiar with the ESP8266, the ESP32 is its successor, loaded with lots of new features. Updated 5 August 2024 New to the ESP32? You’re in the right place. This guide contains all the information you need to get started with the ESP32. Learn what is an ESP32, how to select an ESP32 board, how to get your first [...]
- [Exploring the Uno Wifi R3: A Treat for IoT Enthusiasts](https://digilogelectronics.com/exploring-the-uno-wifi-r3-a-treat-for-iot-enthusiasts/): Uno+WiFi R3 (ATmega328P + ESP8266 8MB) with USB-TTL CH340G – Compatible with Arduino UNO The Uno+WiFi R3 is an upgraded 2-in-1 development board that combines the ATmega328P microcontroller and the ESP8266 WiFi module (8MB memory) on a single board. It works just like a normal Arduino UNO but with built-in WiFi, making it perfect for IoT and smart-device projects. Both chips (ATmega328P & ESP8266) can work together or individually, and each has its own pin headers. The board uses a CH340G USB-TTL converter, allowing you to upload code and firmware through a normal USB cable. This board includes a DIP-switch that [...]

## Pages

- [International Payment Options](https://digilogelectronics.com/international-payment-options/): XTransfer Payment Account Details 1) GBP Payment (UK Region) Payment Method: BACS / CHAPS / FPS Only Account Number: 11027042 Sort Code: 234238 Account Name: Shenzhen Renxin XunMao Trade Co., Ltd Bank: Deutsche Bank AG, London Bank Address: 21 Moorfields London EC2Y 9DB SWIFT / BIC: DEUTGB2L Currency accepted: GBP only Note: Write Buyer Name + Invoice / Contract Number + Product Name in payment memo. 2) EUR Payment (Eurozone Region) Payment Method: SEPA Only IBAN: GB75DEUT23423806012251 Account Name: Shenzhen Renxin XunMao Trade Co., Ltd Bank: Deutsche Bank AG, London Currency accepted: EUR only Note: Write Buyer Name + Invoice / [...]
- [Terms Of Service](https://digilogelectronics.com/terms-of-service/):   Publication Policies for digilogelectronics.com Content Type: We publish product details, electronics information, tutorials, specs, blog guides, comparison guides, brand info, and technology news. Content Rules: Information must be real, correct and not false. We do not publish illegal, violent, hate, abusive or harmful content. We do not publish adult / sexual content. We do not publish content that promotes scams or cheating. All product reviews must be honest and based on real experience or real verified info. If the content is sponsored/advertised/paid, we will clearly mention it. Content Ownership: When we publish, we must respect brand IP, copyrights and trademarks. [...]
- [Privacy Policy URL](https://digilogelectronics.com/privacy-policy-url/): Publication Policies for digilogelectronics.com Content Type: We publish product details, electronics information, tutorials, specs, blog guides, comparison guides, brand info, and technology news. Content Rules: Information must be real, correct and not false. We do not publish illegal, violent, hate, abusive or harmful content. We do not publish adult / sexual content. We do not publish content that promotes scams or cheating. All product reviews must be honest and based on real experience or real verified info. If the content is sponsored/advertised/paid, we will clearly mention it. Content Ownership: When we publish, we must respect brand IP, copyrights and trademarks. We [...]
- [Digilogpk Product page](https://digilogelectronics.com/digilogpk-product-page/)
- [Shop(Digilog.pk)](https://digilogelectronics.com/shopdigilog-pk/)
- [Wishlist](https://digilogelectronics.com/wishlist/)
- [My account](https://digilogelectronics.com/my-account/)
- [Checkout](https://digilogelectronics.com/checkout/)
- [Cart](https://digilogelectronics.com/cart/)
- [Shop](https://digilogelectronics.com/shop/)
- [Our Stores](https://digilogelectronics.com/our-stores/): About Digilogelectronics Welcome to Digilogelectronics, where innovation meets reliability. We’re not just an electronics store — we’re your partner for smart, high-quality technology that empowers your life. Our Story Digilogelectronics was founded with a simple belief: technology should be powerful, accessible, and trustworthy. Our journey began when our founders, tech enthusiasts themselves, realized how confusing and fragmented the electronics market can be. They saw people struggling to find real value — good products, fair prices, and support they could count on — so they decided to build a store that does better. Over the years, we’ve grown by listening. Every question, every [...]
- [Track your order](https://digilogelectronics.com/track-order/)
- [FAQ](https://digilogelectronics.com/faq/): FAQs (Frequently Asked Questions) 1. Do you provide sourcing from China factories?Yes. We find products, verify suppliers, check quality and arrange shipping for you. 2. Can you ship to Pakistan and other countries?Yes. We ship worldwide. Pakistan, UAE, Saudi Arabia, UK, EU, Africa, USA all supported. 3. How can I make payment?We support XTransfer payments. You can pay GBP, EUR or Hong Kong account according to region. 4. Can you help us find specific products?Yes. Send product link, sample pictures, specs or reference. We will source best factory and give quotation. 5. Do you offer bulk wholesale prices?Yes. B2B buyers get [...]
- [Contact Us](https://digilogelectronics.com/contact/): Contact Us If you need any support, quotation, sourcing help or business inquiry — you can contact us anytime. WhatsApp / WeChat: +86 13533004245Owner Name: Naeem Ahmad China Registered Company Name:Shenzhen Renxin XunMao Trade Co., Ltd(中文：深圳市仁鑫迅贸贸易有限责任公司) Company Address (China):深圳市宝安区西乡街道固兴社区固戌一路38号固戍华庭B区2F198 We reply fast.We support Pakistan – China – Global B2B business.
- [Blog](https://digilogelectronics.com/blog/): Take a look here on how to setup your blog page: http://docs.uxthemes.com/article/243-how-to-setup-your-blog-page
- [About](https://digilogelectronics.com/about/): About Us Digilog.pk is our parent company in Pakistan. We started our journey from local distribution and product sourcing. Now we are expanding our business internationally. We work directly with China factories, suppliers and global partners to provide better prices, reliable sourcing and fast delivery for B2B customers worldwide. Our goal is to make international trading easier, faster and safer for Pakistan and global buyers. We focus on trust, transparency and quality. Your business growth is our business success.
- [DigilogElectronics](https://digilogelectronics.com/)

## Products

- [Mini DC-DC Boost Converter 0.9V~5V to 5V 600MA USB Output charger step up Power Module](https://digilogelectronics.com/product/mini-dc-dc-boost-converter-0-9v5v-to-5v-600ma-usb-output-charger-step-up-power-module/): Great Step-up Module with 0.9-5V input, and output 5V for many digital devices, so this is really a great module for designing a portable charger. Useful for your USB charger projects and onboard USB device supply solutions. (ie GoPro cameras) You can supply it with single-cell LiPO or an AA-size batter or others. Two AA batteries can output a current of 500 ~ 600MA, and a single AA battery power supply can output 200ma current supply, great for mobile phones cameras, single-chip, and digital products supply. Applications USB voltage regulator for USB-powered devices. This module will bring the USB voltage required for your application [...]
- [Compatible with Arduino MEGA2560R3 improved CH340G with USB cable](https://digilogelectronics.com/product/compatible-with-arduino-mega2560r3-improved-ch340g-with-usb-cable/): The ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board is a micro-controller board base on the ATmega2560. It has a USB host interface to connect with Android based phones, base on the MAX3421e IC. It has 54 digital input/output pins (of which 15 can be used as PWM outputs); 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator; a USB connection, a power jack, an ICSP header, and a reset button. The MEGA ADK is base on the Mega 2560. Similar to the Mega 2560 and Uno, it features an ATmega8U2 program as a USB-to-serial converter. Revision 3 of the Mega ADK board [...]
- [STM32F030F4P6 core board development board core ARM CORTEX-M0](https://digilogelectronics.com/product/stm32f030f4p6-core-board-development-board-core-arm-cortex-m0/): This STM32F030F4P6 core board development board core ARM CORTEX-M0 board is a Minimum System Board STM32F030F4P6 (Cortex-M0). The MCU target is STM32F030F4P6 which is provided by ST. It is a 32-bit ARM Cortex -M0 CPU, frequency up to 48 MHz, high-speed built-in memories. As a minimum ready-to-run system, this board integrates micro USB power supply interface, ISP / SWD interface programming / debugging startup mode selection and so on to take you to the ARM Cortex world easily. Connection Diagram:
- [Uno+WiFi R3 AtMega328p+NodeMCU ESP8266 8mb Memory USB-TTL CH340G Compatible for Arduino UNO](https://digilogelectronics.com/product/unowifi-r3-atmega328pnodemcu-esp8266-8mb-memory-usb-ttl-ch340g-compatible-for-arduino-uno/): Uno+WiFi R3 AtMega328p+NodeMCU ESP8266 8mb Memory USB-TTL CH340G Compatible for Arduino UNO is full integration on one board: Uno R3 ATmega 328 and WiFi ESP8266 with memory 8Mb (MegaByte). All of the modules can work together or separately. And everyone has their own pinout headers. The convenient solution for the development of new projects requiring Uno and WiFi. Via USB you can update sketches and firmware for ATmega328 and for ESP8266. For this onboard have the USB-serial converter CH340G. It is a modernized version of the classic Arduino UNO R3 board. Full integration of a microcontroller ATmega328 and a Wi-Fi chip ESP8266 with 8 MB memory on one board. All modules can work together [...]
- [MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino](https://digilogelectronics.com/product/mcp2515-can-module-tja1050-receiver-spi-51-single-chip-program-routine-arduino/): This is MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino with this module, you will find easy to control any CAN Bus device by SPI interface with your MCU, such as Arduino UNO and Compatible with Arduino based micro-controller projects. Pin Definitions VCC 5V power input pin GND power ground pin CS SPI SLAVE select pin (Active Pin) SO SPI master output slave input pin SCLK SPI clock pin INT MCP2515 interrupt pin Interface J1 120R resistor terminal selection J2 CANH, CANL KF301-2P block output J3 CANH, CANL pin output Schematic of MCP2515 CAN Module TJA1050 Receiver SPI 51 Features : Support [...]
- [Raspberry Pi 4 Model B](https://digilogelectronics.com/product/raspberry-pi-4-model-b/): Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+ Please Note: SD Card is not included You might be curious about what’s new and what’s the same with the Raspberry Pi 4 Model B? Here’s the comparison chart with highlighted points where you will get everything you need to know at a glance!  
- [Arduino R3 improves the Development Board starter learning kit](https://digilogelectronics.com/product/arduino-r3-improves-the-development-board-starter-learning-kit/): List of packages: 1xESP32 development board 1 x 0.96 “0LED 1 x 830 lace-up chest plate 1 x  obstacle avoidance module 1 x photoresistor module 1 x DHT11 Temperature and Humidity module 1 x HC-SR501 PIR motion sensor 1 x Potentiometer (10K) A Micro USB cable 30 x resistor (220R/1K/10K) 1 x passive buzzer 1 x Active buzzer 1 x 5V dual channel relay module 6 x push button switch 10 x F-M DuPont cable 10 x F-F DuPont cable 10 x M-M DuPont cable 5 x LED red 5 x LED yellow 5 x LED green 2 x RGB
- [Starter Eletronics Components For Arduino](https://digilogelectronics.com/product/starter-eletronics-components-for-arduino/): Introducing the ultimate Arduino starter kit for students and beginners! This comprehensive learning solution combines essential electronics components with advanced functional modules, providing everything needed to master Arduino programming and hardware integration. What’s Included: This kit features a carefully curated selection of starter components perfect for building foundational skills, along with specialised modules that set it apart from other kits. You’ll have RFID modules, temperature and humidity sensors, and other functional components that enable real-world applications and more sophisticated projects. Progressive Learning Path: Our structured curriculum takes you from absolute basics to complex projects. Each of the many included projects comes [...]
- [AC-DC Step-Down Module](https://digilogelectronics.com/product/ac-dc-step-down-module/): Product Parameters:220V to 5V 700MA Output voltage DC 5V Output current 700MA Output power 3.5W Frequency 50HZ/60HZ Length (mm) 29 Width (mm) 20 Height (mm) 15 Weight (g) 11 Shipping Weight 0.016 kg Shipping Dimensions 5 × 5 × 2cm Product Parameters:220V to 12V 400MA Output Voltage DC 12V Output current 400MA Output Power 5W Frequency 50HZ/60HZ Overvoltage Protection Yes Over Current Protection Yes Length(Mm) 30 Width(Mm) 20 Shipping Weight 0.015Kg Shipping Dimensions 12 × 10 × 3 Cm Product Parameters:220V to 9V 500MA Output Voltage DC 9V Output Current 500MA Output Power 4.5W Frequency 50HZ/60HZ Overvoltage Protection Yes Over Current [...]
- [Pitaya-Link CMSIS-DAP Debug Probe](https://digilogelectronics.com/product/pitaya-link/): Description Pitaya-Link is a low-cost debug probe based on the CMSIS-DAP (also known as DAPLink) protocol standard. It can be used to program and debug the application software running on Arm Cortex Microcontrollers. The design enables developers with Drag-And-Drop programming, Virtual COM Port, CMSIS-DAP compliant debug channel, and access to Arm Cortex Microcontrollers in the browser using WebUSB. The probe comes with indicator LEDs, a button to reset the target or trigger the firmware update, reversible USB-C connector and easy-to-use 7-pin 2.54mm Header. Features NXP Semiconductors LPC11U35FHI33 microcontroller 50 MHz Arm® Cortex-M0 processor 64kB flash & 12kB SRAM ROM-based USB drivers. Flash [...]
- [Pitaya Go nRF52840 WiFi IoT Board](https://digilogelectronics.com/product/pitaya-go/): Description Pitaya Go is a compact and versatile development platform for IoT solutions, combining the Nordic’s high-end multiprotocol SoC nRF52840 and the Microchip’s extreme low power Wi-Fi® network controller ATWINC1500B. It offers a complete solution for wireless connectivity with IEEE 802.11 b/g/n, Bluetooth 5, Thread and Zigbee, that is specifically designed for the IoT. Pitaya Go features a Battery Charger with power path management, 64Mbit ultra low power QSPI Flash memory, additional NFC-A Tag PCB Antenna, user programmable RGB LED and Buttons, reversible USB-C Connector and easily expandable Header Sockets. All these features above make this board an ideal choice for [...]
- [nRF9151 Connect Kit](https://digilogelectronics.com/product/nrf9151-connectkit/)
- [nRF54L15 Connect Kit](https://digilogelectronics.com/product/nrf54l15-connectkit/)
- [nRF52840-MDK IoT Development Kit](https://digilogelectronics.com/product/nrf52840-mdk-iot-development-kit/): Description The nRF52840-MDK is a versatile, easy-to-use IoT hardware platform for Bluetooth 5, Bluetooth Mesh, Thread, IEEE 802.15.4, ANT and 2.4GHz proprietary wireless applications using the nRF52840 SoC. The development kit comes with a fully integrated debugger (also known as DAPLink)that provides USB drag-and-drop programming, USB Virtual COM port and CMSIS-DAP interface. The kit contains a Microchip USB 2.0 Hi-Speed hub controller with two downstream ports: one for DAPLink interface and one for nRF52840 USB device controller. The kit also features ultra-low power 64-Mb QSPI FLASH memory, programmable user button, RGB LED, up to 24 GPIOs, antenna selection for custom applications. It [...]
- [nRF52840 MDK USB Dongle w/ Case](https://digilogelectronics.com/product/nrf52840-mdk-usb-dongle-w-case/): Description nRF52840 MDK USB Dongle is a small and low-cost development platform enabled by the nRF52840 multiprotocol SoC in a convenient USB Dongle form factor. The design features a programmable user button, RGB LED, up to 12 GPIOs and 2.4G Chip antenna on board. It can be used as a low-cost Bluetooth5/Thread/802.15.4/ANT/2.4GHz multiprotocol node or development board. Alternatively the USB Dongle can be used as a Network Co-Processor(NCP) with a simple connection to a PC or other USB enabled device. It’s shipped with the UF2 Bootloader, supports nRF Connect SDK, which integrates the Zephyr RTOS, protocol stacks, samples, hardware drivers and [...]
- [nRF52840 MDK USB Dongle (PCBA)](https://digilogelectronics.com/product/nrf52840-mdk-usb-dongle/): Description nRF52840 MDK USB Dongle is a small and low-cost development platform enabled by the nRF52840 multiprotocol SoC in a convenient USB Dongle form factor. The design features a programmable user button, RGB LED, up to 12 GPIOs and 2.4G Chip antenna on board. It can be used as a low-cost Bluetooth5/Thread/802.15.4/ANT/2.4GHz multiprotocol node or development board. Alternatively the USB Dongle can be used as a Network Co-Processor(NCP) with a simple connection to a PC or other USB enabled device. It’s shipped with the UF2 Bootloader, supports nRF Connect SDK, which integrates the Zephyr RTOS, protocol stacks, samples, hardware drivers and [...]
- [nRF52840 M.2 Module w/ PCB Antennas](https://digilogelectronics.com/product/nrf52840-m2-module/): Description nRF52840 M.2 Module is a removable module designed and built to meet the multiprotocol connectivity, security and ease-of-use requirements of your next embedded design. Based on the nRF52840 SoC, it has protocol support for Bluetooth 5, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary stacks. The module comes with an M.2 (also known as NGFF – Next Generation Form Factor) Key-E form factor, 64Mbit QSPI flash memory, RGB LED and U.FL/I-PEX MHF antenna connectors, that will simplify and minimize the development cycle and deployment of your end-product helping to accelerate its time-to-market. Key Features Nordic Semiconductor nRF52840 SoC 64 MHz [...]
- [nRF52840 M.2 Developer Kit](https://digilogelectronics.com/product/nrf52840-m2-developer-kit/): Description nRF52840 M.2 Developer Kit is a versatile IoT prototyping platform, including the nRF52840 M.2 Module and M.2 Dock. You can use the developer kit to prototype your IoT products and then scale to production faster using the nRF52840 M.2 Module combined with your custom PCB hardware. The nRF52840 M.2 Module is a removable M.2 E-Key form factor module based on the nRF52840 SoC, supporting Bluetooth 5, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary stacks. The M.2 Dock extends the interfaces compared to the nRF52840 M.2 Module through an M.2 E-Key connector. This design also features a fully-integrated DAPLink [...]
- [nRF52840 Connect Kit](https://digilogelectronics.com/product/nrf52840-connectkit/): Description nRF52840 Connect Kit is an open-source prototyping kit designed for connected projects. It is built using the nRF52840 SoC, which has protocol support for Bluetooth LE, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary stacks. It provides Arm TrustZone® CryptoCell cryptographic unit as well as numerous peripherals such as USB 2.0, NFC-A, GPIO, UART, SPI, TWI, PDM, I2S, QSPI, PWM, ADC, QDEC to support a wide range of applications. The design is available in an easy-to-use form factor with USB-C and 40 pin DIP/SMT type, including up to 32 multi-function GPIO pins (7 can be used as ADC [...]
- [nRF52832-MDK V2 IoT Development Kit](https://digilogelectronics.com/product/nrf52832-mdk-v2-iot-development-kit/): Description The nRF52832-MDK V2 is a fully open-source, versatile single board development kit for Bluetooth® low energy, ANT and 2.4GHz proprietary applications using the nRF52832 SoC in a convenient USB dongle form factor. The kit comes with a fully integrated debugger (also known as DAPLink) that provides USB drag-and-drop programming, USB Virtual COM port and CMSIS-DAP interface. The kit gives access to 24 I/Os and interfaces via headers and has a programmable RGB LED. It also has a 2.4GHz chip antenna on-board which is quite convenient to develop IoT wireless applications. The nRF52832-MDK V2 can be used to play with multi-frameworks such as: nRF5 [...]
- [nRF52832-MDK IoT Development Kit](https://digilogelectronics.com/product/nrf52832-mdk-iot-micro-development-kit/): Description The nRF52832-MDK is a fully open-source, versatile single board development kit for Bluetooth® low energy, ANT and 2.4GHz proprietary applications using the nRF52832 SoC. The kit comes with a fully integrated debugger (also known as DAPLink) that provides USB drag-and-drop programming, USB Virtual COM port and CMSIS-DAP interface. The kit gives access to 24 I/Os and interfaces via headers and has a programmable RGB LED. It also has a 2.4GHz chip antenna on-board which is quite convenient to develop IoT wireless applications. The nRF52832-MDK can be used to play with multi-frameworks such as: nRF5 SDK, nRF5 SDK for Mesh, Mbed OS 5, [...]
- [M60 Mechanical Keyboard Plate](https://digilogelectronics.com/product/m60-mechanical-keyboard-plate/): Overview M60 Mechanical Keyboard Plate is a 60% plate board specially designed for M60 Mechanical Keyboard. This plate is made of FR-4 material and perfectly integrates Bluetooth (2.4GHz) antenna and NFC antenna, which enables high-performance RF transmission even if you are using a metal case. It also allows you to scan the NFC tag on the front of the keyboard. Specs Designed for M60 Mechanical Keyboard Integrated Bluetooth (2.4GHz) & NFC antennas Material: FR-4 Layout: 60%(61 keys) Classic MX Switch Cutout Cherry PCB Mount + Costar Stabilizer Cutout Dimensions: 285.4 x 95 x 1.45 mm Weight: 1.6 oz (45 g) In [...]
- [M60 Mechanical Keyboard PCBA](https://digilogelectronics.com/product/m60-mechanical-keyboard-pcba/): Note: This is a keyboard PCBA, which is a part of a keyboard. See What’s inside the Box. M60 Mechanical Keyboard An Open Source, USB & BLE 5.0, Modular, Hot-Swappable, 60% Keyboard powered by Python USB Type-C & BLE 5.0 Connectivity M60 uses Nordic’s nRF52840 SoC to provide USB Type-C wired and Bluetooth LE 5.0 wireless connectivity. It can easily pair to your PC, laptop, smartphone, or tablet with Bluetooth LE. Powered by Python It’s not just a keyboard but also a USB drive containing Python files. Its Python code can be changed with any text editor and executed simultaneously, which makes [...]
- [iMX RT1011 Nano Kit](https://digilogelectronics.com/product/imxrt1011-nanokit/): Description iMX RT1011 Nano Kit is a small, high-performing prototyping kit designed around NXP’s iMX RT1011 Crossover MCU based on the Arm Cortex-M7 core, which operates at speeds up to 500 MHz to provide high CPU performance and best real-time response. It has 128 KB on-chip RAM that can be flexibly configured as TCM or general-purpose as well as numerous peripherals including high speed USB, UART, SPI, I2C, SAI, PWM, GPIO, ADC and etc to support a wide range of applications. The design provides external 128 Mbit QSPI flash with XIP support, flexible power management, programmable LED and Button, easy-to-use form [...]
- [Base Dock (Grove Compatible)](https://digilogelectronics.com/product/base-dock/): Description The Base Dock is an essential tool allowing you to build rapidly Internet of Things applications. It is an ideal add-on to the existing nRF52832-MDK and nRF52840-MDK development boards. The Base Dock can be powered by only one AA battery, and it also features a power button and a PCB NFC antenna. It is also Grove compatible, which means you can connect easily and quickly sensors with the 4 Grove connectors. For more about Grove, please visit Seeed Studio Grove page. Features Work with nRF52832-MDK and nRF52840-MDK development boards Low-cost and convenient for Mesh Networking applications Grove compatible with hundreds [...]
- [UM66 Melody Generator IC – CMOS LSI Sound Chip for Doorbells, Toys, Alarms](https://digilogelectronics.com/product/um66-melody-generator-ic-cmos-lsi-sound-chip-for-doorbells-toys-alarms/): 📝 Product Description (SEO Enhanced) The UM66 Melody Generator IC is a popular and compact CMOS LSI sound chip, pre-programmed to play a melody when powered. Ideal for use in doorbells, greeting cards, toys, and alarms, it operates on ultra-low power and delivers a crisp melody output with minimal external components. This IC is part of the UM66TXXL series, each version offering different pre-programmed tunes. It includes an internal oscillator circuit, allowing for simplified circuit designs—just add a transistor and speaker to create a complete musical output system. Thanks to its built-in ROM and CMOS technology, the UM66 consumes minimal power, [...]
- [Signal Generator Cable](https://digilogelectronics.com/product/signal-generator-cable/): Notice Buying this product individually does not include shipping. Free shipping is available for orders over $30.
- [Oscilloscope Adapter Connector](https://digilogelectronics.com/product/oscilloscope-adapter-connector/): Applicable to P6100 Oscilloscope Probe
- [Multimeter Probe](https://digilogelectronics.com/product/multimeter-probe/): Notice Buying this product individually does not include shipping. Free shipping is available for orders over $30.
- [FNIRSI® WMT-10 Non-contact Inductive Wood & Wall Moisture Meter Hygrometer](https://digilogelectronics.com/product/fnirsi-wmt-10-non-contact-inductive-wood-wall-moisture-meter-hygrometer/): The WMT-10 Inductive Wood Moisture Meter is equipped with a 2.4-inch high-definition color screen, designed specifically to meet the needs of the wood processing industry and wood users. This advanced tool ensures accurate measurement of wood moisture content, supporting four distinct measurement modes: hardwood, softwood, plaster wall, and brick wall.   Key Features: High-Precision Measurements: The WMT-10 provides high-accuracy moisture detection with a resolution of 0.1%, ensuring precise readings for various materials. It covers a broad range of measurement depths, up to 17mm. Wide Measurement Range: This moisture meter supports a comprehensive measurement range from 0% to 75%, making it versatile [...]
- [FNIRSI® WD-02 Wall Detector Scanner](https://digilogelectronics.com/product/fnirsi-wd-02-wall-detector-scanner/): FNIRSI WD-02 Wall Detector is an upgraded version of WD-01, WD-02 has upgraded high-definition TFT display screen and new UI interface. Also added 6 languages: Russian, English, Portuguese, Japanese, Simplified Chinese, and Traditional Chinese. Its 3-level sensitivity adjustment makes the measurement accuracy higher. It can be used to detect steel bars, metal joists, metal pipes, wood, wires in walls, ceilings and floors. 3 detection modes are designed, metal detection mode, wood detection mode and AC detection mode to meet your different working needs. The brand-new positioning hole design is no longer afraid of drilling wires and steel bars. Widely used in [...]
- [FNIRSI® WD-01 Wall Detector Scanner](https://digilogelectronics.com/product/fnirsi-wd-01-wall-detector-scanner/): WD-01 wall detector scanner can help you to quick locate edges and center metal, studs, joists, pipes and live AC wire behind walls, floors and ceiling. The measuring ranges of wooden is ≤38mm, AC wires ≤50mm, metal pipes ≤100mm and rebars ≤120mm.The HPC detection module can makes this wall detector scanner with better anti-interference capacity and fater calculating speed.Multiple predictions: The screen will display the target depth, arrive at the detection center and the material, the indicator light will lights up yellow or red depending on the target distance, the green light means No traget.It will also beep when a target [...]
- [FNIRSI® SWM-10 Portable Intelligent Color Screen Spot Welding Machine](https://digilogelectronics.com/product/fnirsi-swm-10-portable-intelligent-color-screen-spot-welding-machine/): SWM-10 portable handheld spot welding machine is an efficient, convenient and easy-to-carry spot welding tool.   Feature: Portable intelligent color screen spot welding machine Welding thickness: 0.1-0.25mm Charging/Discharging: 5V/2.1A Mash welder+ mobile power bank 1200A Maximum welding current Intelligent anti-burning Multiple security protection reminders Capacity: 5000mAh High quality A-grade battery cells Welding materials: Nickel sheet, iron sheet, stainless steel Special spot welding pen 1200A current discharge Gear: 4 combination adjustment gear Specifications Brand FNIRSI Model SWM-10 Capacity 5000mAh Charge 5V/2.1A Discharge 5V/2.1A Welding Materials Nickel sheet, iron sheet, stainless steelsheet, aluminum sheet Welding Thickness 0.1-0.25MM Maximum Welding Current 1200A Gear 4 [...]
- [FNIRSI® SG-004A Multi-functional Signal Generator](https://digilogelectronics.com/product/fnirsi-sg-004a-multi-functional-signal-generator/): FNIRSI SG-004A signal generator is a high-performance device aimed at the industrial control industry. It can handle various working conditions with one device. The device has a simple but stable appearance design, simple operation logic and powerful performance, and has been loved by consumers since it was launched. Support voltage, current, frequency, thermocouple and other signal mode output and input, support independent 24V power supply, programming mode, real-time curve, historical record, MODBUS communication, firmware upgrade and other powerful functions.   Features ≤0.2% Error Engineering quantity / signal value Real-Time curve record view 2.4″TFT Full Color HD display with backlight Designed for [...]
- [FNIRSI® SG-003A Signal Generator](https://digilogelectronics.com/product/fnirsi-sg-003a-signal-generator/): FNIRSI SG-003A signal generator is mainly used for debugging of industrial field PLC, process instrumentation, electric valve and so forth. Friendly operation interface is easy to use.The FNIRSI SG-003A signal generator is small and light but has a long standby time and high precision.Easy to carry when you go out to work.Adjustable button backlight and high-definition TFT color LCD screen make it more convenient for users to operate at night and during the day.   Features Expect with the conventional signal input and output functions. Signals displayed as physical or engineering values, corresponding linearly. Voltage and current have automatic output function,it [...]
- [FNIRSI® SFD-02 4-IN-1 Indoor Air Quality Monitor Touchscreen Formaldehyde Detector HCHO TVOC Temperature Tester](https://digilogelectronics.com/product/fnirsi-sfd-02-4-in-1-indoor-air-quality-monitor-touchscreen-formaldehyde-detector-hcho-tvoc-temperature-tester/): FNIRSI SFD-02 Formaldehyde & Air Quality Monitor The FNIRSI SFD-02 is a smart indoor air quality tester, designed to monitor formaldehyde (HCHO) and TVOC levels in real time. Ideal for homes and offices, it provides accurate, easy-to-read data and intelligent features to help keep your environment safe and healthy.   Key Features: Real-Time MonitoringInstantly displays formaldehyde, TVOC, humidity, and time — know your air quality at a glance. Air Quality AssessmentEvaluates formaldehyde levels and alerts you to potential health risks. Historical Data RecordingTracks changes in HCHO and TVOC over time for better long-term air quality management. Spatial AveragingCalculates average values of [...]
- [FNIRSI® SAG-55 Intelligent 550W Hot Air Gun](https://digilogelectronics.com/product/fnirsi-sag-55-intelligent-550w-hot-air-gun/): ⚠️ Please make sure to select the correct power plug type: US Plug or EU Plug. If neither fits your socket, you may choose based on the voltage range and use an adapter. Please note that once selected, the plug type cannot be changed.   The SAG-55 Intelligent Hot Air Gun is a newly launched portable smart hot air gun designed to meet various application needs. It uses a microcontroller with PID precise temperature control technology, ensuring rapid heating with minimal thermal shock, which extends the lifespan of the heating element. The brushless fan supports adjustable wind speeds from levels 1 [...]
- [FNIRSI® S1 Large Screen Digital Display Smart Multimeter](https://digilogelectronics.com/product/fnirsi-s1-large-screen-digital-display-smart-multimeter/): AC and DC voltage Intelligent anti-burning Automatic Identification Positive RMS Auto measurement Data hold Built-in flashlight NCV induced voltage Rechargeable: Built-in rechargeable battery, chargeable via power bank or computer. Solid & durable: Constructed with high-quality ABS material for longevity. Easy to install and remove: Simple installation and removal, adaptable for various environments like kitchens, bathrooms, and offices.
- [FNIRSI® P6100 Oscilloscope Probe](https://digilogelectronics.com/product/fnirsi-p6100-oscilloscope-probe/): Features: Bandwidth DC-6MHzDC-100MHz Attenuation Ration 1 : 10 Input Resistance 1M : 10 Input Capacitance 1X: 85pF-120pF10X: 18.5pF-22.5pF Compensation Range 10pF-30pF Rise Time <3.5ns Working Voltage 1X: <200V DC+ACPeak10X: <600V DC+AC PeakCable Length 120cm Temperature Opertating: -10℃ ~ +50℃Nonopertating: -20℃ ~ +75℃Humidity: ≤5% (relative humidity)   Specifications: Cable Length: 120cm Weight: 80g Color: Grey + Black Package Include: 1 x P6100 Oscilloscope Probe
- [FNIRSI® P4100 High Voltage Oscilloscope Probe with Accessory Kit](https://digilogelectronics.com/product/fnirsi-p4100-high-voltage-oscilloscope-probe-with-accessory-kit/): Specifications Applicable Models Universal Input Resistance 100MΩ Input Capacitance 6pF Compensation Range 10pF-35pF Bandwidth 100MHz Rise Time 3.5ns Maximum Operating Voltage 1000V DC + ACPP Color black Material ABS Cable Length 1.1m   Package Contents: 1* screwdriver8* marked multi-color ribbon2 * Tip positioning sleeve1* spring1* User Manual   Note: ※ Only the above package content, other products are not included. ※ Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
- [FNIRSI® NVS-40 4K HD Binocular Night Vision Infrared 6x Digital Zoom](https://digilogelectronics.com/product/fnirsi-nvs-40-4k-hd-binocular-night-vision-infrared-6x-digital-zoom/): FNIRSI® NVS-40 is a binocular night vision instrument used for observing objects in pitch black or weak light. The observation distance in weak light is not limited, and can reach 300 meters in full darkness environments. Equipped with USB interface and TF card slot, supporting firmware updates and shooting storage. Fully functional, this color screen can be used normally during the day and night, with functions such as taking photos, shooting, playback, and electronic zoom up to 6x. This device is the best auxiliary tool for human night vision extension.   Features Drawtube: Binocular Night Vision Complete Dark Viewing Distance 300M [...]
- [FNIRSI® NVS-20 4K HD Monocular Night Vision Device Infrared 6x Digital Zoom](https://digilogelectronics.com/product/fnirsi-nvs-20-4k-hd-monocular-night-vision-device-infrared-6x-digital-zoom/): FNIRSI® NVS-20 is a monocular night vision instrument used for observing objects in pitch black or weak light. The observation distance in weak light is not limited, and can reach 300 meters in full darkness environments. Equipped with USB interface and TF card slot, supporting firmware updates and shooting storage. Fully functional, this color screen can be used normally during the day and night, with functions such as taking photos, shooting, playback, and electronic zoom up to 6x. This device is the best auxiliary tool for human night vision extension.   Features Drawtube: Monocular Night Vision Complete Dark Viewing Distance 300M [...]
- [FNIRSI® MT-40 Smart Digital Multimeter](https://digilogelectronics.com/product/fnirsi-mt-40-smart-digital-multimeter/): The MT-40 is a cutting-edge multimeter designed to simplify and enhance measurement tasks. Equipped with a high-definition backlit LCD display, it delivers clear and easy-to-read measurements. Its intelligent auto-ranging feature eliminates manual adjustments, ensuring efficient and accurate results.Powered by an advanced chip, the MT-40 boasts an ultra-fast sampling rate of 3 times per second, providing real-time data for precise analysis. This powerful device offers various functions, including True RMS measurement, capacitance, resistance, diode testing, and non-contact voltage detection.With its overload protection and intelligent anti-burning features, the MT-40 safeguards both your measurements and the device itself. The compact and lightweight design, combined [...]
- [FNIRSI® MC-40 Clamp Meter Digital Multimeter](https://digilogelectronics.com/product/fnirsi-mc-40-clamp-meter-digital-multimeter/): The MC-40 is a high-precision clamp meter designed to handle a wide range of measurement tasks with ease. This versatile tool features a high current rating of 600A, allowing you to measure even the most demanding electrical loads.With its intelligent auto-ranging function and True RMS measurement capability, the MC-40 delivers accurate and reliable results every time. The large, clear display and backlight ensure visibility in any lighting condition, while the data hold function allows you to freeze readings for easy analysis.The MC-40 is equipped with a host of additional features, including non-contact voltage detection, diode testing, resistance measurement, and automatic shutdown [...]
- [FNIRSI® LCR-ST1 Mini Smart Digital Tweezer LCR SMD ESR Tester](https://digilogelectronics.com/product/fnirsi-lcr-st1-mini-smart-digital-tweezer-lcr-smd-esr-tester/): The LCR-ST1, our company’s latest developed tweezer-type LCR tester, is a multi-functional and portable testing instrument. It supports precise automatic measurements of resistance, capacitance, inductance, diodes and Continuity. This product adopts advanced measurement technology to ensure high accuracy and stability. Its 1.14 inch color screen display and magnetic adsorption function enhance the convenience of use. The built-in 250mAh lithium battery offers a long-lasting usage time and supports three frequencies: 100Hz, 1kHz, and 10kHz. with 0.3V, 0.6V RMS test levels The unique tweezer-shaped design makes it particularly suitable for fine operations in narrow spaces and quick tests of electronic components. The lightweight [...]
- [FNIRSI® LCR-P1 Multifunction LCR Transistor Capacitor Tester](https://digilogelectronics.com/product/fnirsi-lcr-p1-multifunction-lcr-transistor-capacitor-tester/): The LCR-P1 Transistor Tester is a high-precision, multifunctional electronic testing device designed specifically for electronic engineers, technicians, and enthusiasts.This device is intended for detecting and analyzing the performance and characteristics of semiconductor components such as transistors, diodes, triodes, and field-effect transistors (FETs).Equipped with a color screen, it allows for multi-parameter measurement of various components, automatically identifies the type and pin arrangement of the tested component, simplifying the operation process and enhancing testing efficiency.   Key Features Intelligent anti-burning design: Uncharged capacitors automatically discharge upon insertion, with a user-friendly protection mechanism to prevent damage. Alternate Measuring Modes: Innovatively incorporates replaceable test boards, [...]
- [FNIRSI® LC1020E High Precision Handheld Digital Bridge LCR ESR Tester](https://digilogelectronics.com/product/fnirsi-lc1020e-high-precision-handheld-digital-bridge-lcr-esr-tester/): FNIRSI® LC1020E High-Precision Handheld LCR Meter is a portable and intelligent tool for testing electronic components, ideal for engineers, technicians, and hobbyists. It supports L/Q, C/D, and R/D measurements with series/parallel models, and features a 2.8-inch TFT color display.With preset thresholds and audio-visual alerts, it enables fast pass/fail judgments, improving batch testing and quality control. Supporting up to 100 kHz test frequency, it handles high-frequency analysis of inductors, capacitors, and resistors. Its compact, battery-powered design allows precise, cable-free measurements anytime, anywhere.   Features: High-Precision Measurement with 4.5-Digit ResolutionAchieves up to ±0.05% basic accuracy, offering 10× improved precision for professional-grade measurements. Wide [...]
- [FNIRSI® JBM-10 / JBM-20 Digital Brix Refractometer](https://digilogelectronics.com/product/fnirsi-jbm-10-jbm-20-digital-brix-refractometer/): The JBM-10 and JBM-20 are instrument used to measure the sugar concentration in juices, alcoholic beverages, and other solutions. It features a high-definition color screen display, rich measurement parameters, wide measurement range, and high accuracy. It is suitable for quickly detecting various concentrations of sugar solutions and widely used in the fields of beverages, food, sugar production, alcoholic beverages, agriculture, etc., to control the production process and ensure product quality.   Specifications Brand FNIRSI Model JBM-10 / JBM-20 Range JBM-10: 0%~32% BrixJBM-20: 0%~55% Brix Screen 1.54” IPS HD Color Screen Precision ±0.2% Min. Div. 0.01 Lid Design √ Language Chinese / [...]
- [FNIRSI® IR40 Smart Laser Rangefinder](https://digilogelectronics.com/product/fnirsi-ir40-smart-laser-rangefinder/): The FNIRSI IR40 Laser Rangefinder Kit uses precision laser technology to provide fast, easy and accurate measurements every time you use it.This handy tool comes in a pocket-sized, easy-to-carry format and provides length, area, and volume measurements in inches, feet, and metric.The compact laser measurer measures and displays length; calculates and displays area; and displays continuously updating measurements as you move it closer or further away from the target.Supports Bluetooth function. After connecting to the APP, you can perform measurement recording, computer, painting and other functions.It is ideal for interior decoration, remodeling, floor and wall coverings, real estate appraisals and appraisals, [...]
- [FNIRSI® IPS3608 AC-DC Intelligent Digital Control Power Supply](https://digilogelectronics.com/product/fnirsi-ips3608-ac-dc-intelligent-digital-control-power-supply/): IPS3608 is an AC-DC intelligent digital control power supply that uses digital control technology to efficiently convert AC power into DC power. It is much more intelligent than traditional power supplies. It has the characteristics of convenient parameter adjustment, high-precision output, strong dynamic response, convenient digital control interface, and multiple electrical protections.   Specifications Basic Parameters: Model IPS3608 Screen Material 2.8-inch color screen Backlight Adjustable backlight brightness Language 中文, English Product Size ≈138×214×115mm Product Weight ≈1539g   Battery Parameters: Input Voltage Range: 100-240VAC(50/60Hz) Setting Resolution Voltage: 0.01VCurrent: 0.001A Readback Value Accuracy Output Voltage: ±(0.3%+3 bits)Output Current: ±(0.15%+5 bits) Operating Environment -10℃~40℃, [...]
- [FNIRSI® HS-02 Soldering Iron Tips Accessories](https://digilogelectronics.com/product/fnirsi-hs-02-soldering-iron-tips-accessories/): For HS-02 Smart Soldering Iron  
- [FNIRSI® HS-02 Intelligent Soldering Iron with Portable Soldering Toolbox](https://digilogelectronics.com/product/fnirsi-hs-02-intelligent-soldering-iron-with-portable-soldering-toolbox/): FNIRSI® HS-02 is a portable screen display intelligent soldering iron launched by our company. 1. Fully Upgraded: FNIRSI HS-02 Soldering Iron has an upgraded design with improved grip, shorter tip, larger 0.96” display, and faster heating speed. Ideal for electronic component repair, jewellery repair, circuit board soldering, and micro soldering.2. 100 W High Power & 2 S Tinning: The power of the soldering iron is up to 100W. It can achieve fast heating for soldering. The temperature is adjustable within the range of 212-842 ℉. It automatically adjusts to the power output.3. Portable and Lightweight: We provide a storage case for [...]
- [FNIRSI® HS-02 Intelligent Soldering Iron](https://digilogelectronics.com/product/fnirsi-hs-02-intelligent-soldering-iron/): FNIRSI® HS-02 is a portable screen display intelligent soldering iron launched by our company. 1. Fully Upgraded: FNIRSI HS-02 Soldering Iron has an upgraded design with improved grip, shorter tip, larger 0.96” display, and faster heating speed. Ideal for electronic component repair, jewellery repair, circuit board soldering, and micro soldering.2. 100 W High Power & 2 S Tinning: The power of the soldering iron is up to 100W. It can achieve fast heating for soldering. The temperature is adjustable within the range of 212-842 ℉. It automatically adjusts to the power output.3. Portable and Lightweight: We provide a storage case for [...]
- [FNIRSI® HS-01 Soldering Iron Accessories](https://digilogelectronics.com/product/fnirsi-hs-01-soldering-iron-accessories/): Product Highlight: Internal Heating Type: Efficient internal heating ensures rapid temperature recovery for precise soldering. Lead Free Soldering Station Kit: Adheres to environmental standards with its lead-free soldering station kit. Soldering Demystified: Ease of use with the FNIRSI HS-01 makes soldering demystified for beginners and pros alike. Multiple Soldering Tips: Comes with various soldering tips (BC2, B2, ILS, KR, K65, BC3) for diverse soldering needs. Precision Soldering Iron: Designed for precision soldering, this iron is ideal for intricate electronic work.   Specifications: Material: High-quality stainless steel Product Type: Internal Heating Type Soldering Iron Tip Kit Design and Style: Ergonomic and sleek [...]
- [FNIRSI® HS-01 Intelligent Soldering Iron](https://digilogelectronics.com/product/fnirsi-hs-01-intelligent-soldering-iron/): HS-01 is an intelligent constant temperature electric soldering iron. Its pencil-size and ergonomic design make you fondle admiringly. The anti-scald cap design allows you to take it away at any time. It has the characteristics of light weight, low power consumption, small size and high thermal efficiency. PD65W power supply and DC24V two power supply methods solve the problem of power supply difficulty for you. Wide temperature adjustable range (80-420℃), easy to weld various components and wires. HS-01 will be your indispensable tool.   Features Integrated soldering iron head Efficient heat radiation Precise temperature control 65W PD protocol Left/Right hand switch [...]
- [FNIRSI® HRM-10 Battery Voltage Internal Resistance Tester](https://digilogelectronics.com/product/fnirsi-hrm-10-battery-voltage-internal-resistance-tester/): FNIRSI “HRM-10” is our company’s first handheld high-precision attery internal resistance meter. It is a true four-wire measurement internal resistance meter, designed with precision, convenient to carry. The device can automatically test internal resistance and voltage values simultaneously, with measurement results displayed on the screen. Users can also manually adjust the voltage and resistance range. The product features a sorting mode, automatically filtering the good and bad batteries based on user-set thresholds. It also supports historical records and exporting data tables of historical measurements.   Specifications Brand FNIRSI Model HRM-10 Type Vehicle Battery Tester Voltage Measuring Range 0 ~ ±100V (DC) [...]
- [FNIRSI® HRM-10 Battery Internal Resistance Meter Accessory](https://digilogelectronics.com/product/fnirsi-hrm-10-battery-internal-resistance-meter-accessory/): FNIRSI® HRM-10 Battery Internal Resistance Meter Accessory Kelvin Clip 18650 26650 Testing Probe Pen Battery clip Round Connector
- [FNIRSI® GD-02 Portable Combustible Gas Detector Color Screen Methane Propane Isobutane Monitor](https://digilogelectronics.com/product/fnirsi-gd-02-portable-combustible-gas-detector-color-screen-methane-propane-isobutane-monitor/): The GD-02 is a reliable color-screen gas detector for methane, also tracking temperature and humidity. It delivers fast, accurate readings, quick startup, rapid zeroing, and resists low temperatures, poisoning, and interference. Durable and precise, it maintains performance for over 3 years. Please make sure to read the user manual carefully before use to understand all safety instructions and precautions.   Features 2.0″ Full-Color TFT Display – Real-time display of gas concentration and ambient temperature/humidity with 0.5s refresh rate. Curve Analysis & Data Recording – Supports trend curve analysis and record tracking for more intuitive monitoring. Adjustable Brightness & Dual UI Themes [...]
- [FNIRSI® GC-03 Multifunctional Radiation Detector](https://digilogelectronics.com/product/fnirsi-gc-03-multifunctional-radiation-detector/): GC-03 is a multifunctional radiation detector, a professional instrument for measuring nuclear radiation, mainly used in various occasions such as home, office, car, outdoor environment, etc. It uses a 2.4-inch high-definition color screen and supports real-time monitoring of nuclear radiation, electric field strength, magnetic field strength, etc. The meter supports three alarm modes: sound, vibration, and light.   Key Features 3-in-1 Radiation Detection: Detects electric fields, magnetic fields, and nuclear radiation — all in one device for comprehensive safety monitoring. High-Precision Geiger Counter Tube: Equipped with J321/M4011 GM tube for precision detection, high sensitivity and low power consumption. Wide Application Scenarios: [...]
- [FNIRSI® GC-02 Geiger Counter Nuclear Radiation Detector](https://digilogelectronics.com/product/fnirsi-gc-02-geiger-counter-nuclear-radiation-detector/): Food and Metal Detection Marble and Ore Inspection Nuclear Industry Radioactivity Detection Radioactive Medical Equipment Testing Multifunctional Real-Time Monitoring Core Technology: Geiger-Müller Counter High-Capacity 850mAh Battery Detector: Energy Compensation GM Tube (Geiger Counter Tube) Detection Ray Types: Gamma Rays, X-Rays, Beta Rays
- [FNIRSI® GC-01 Nuclear Radiation Detector](https://digilogelectronics.com/product/fnirsi-gc-01-nuclear-radiation-detector/): The FNIRSI GC-01 nuclear radiation detector uses a higher-precision Geiger-Miller counter.Counter for detecting the intensity of ionizing radiation (beta particles, gamma rays and x-rays).Use a gas tube or a small chamber as a probe. When the voltage applied to the probe reaches a certain range.Each time the ray is ionized in the tube to produce a pair of ions, it can be amplified to produce an electric pulse of the same size.And recorded by the connected electronic device.The number of rays per unit time thus measured.The alarm threshold measurement rate can be arbitrarily selected.   Features Food/metal detection Marble/ore inspection Nuclear [...]
- [FNIRSI® FNB58 USB Fast Charge Tester](https://digilogelectronics.com/product/fnirsi-fnb58-usb-fast-charge-tester/): The FNB58 USB tester is a high-reliability, high-safety USB voltage andcurrent detection meter and a mobile communication terminal fast chargingtrigger.It has a 2.0-inch full-color ultra-wide viewing angle TFT LCD display, integrated USB-A, Micro-USB, Type-C interface. Use external 16-bit ADC, PD protocol physical chip. It can be used to measure the power supply or power consumption of products such as USB interfaces, mobile phone chargers, and U disks; it can be used to measure the charging power of mobile phones and the input and output of mobile power supplies; it can be used to test the fast charging protocol of chargers.   [...]
- [FNIRSI® FNB48S USB Tester](https://digilogelectronics.com/product/fnirsi-fnb48s-usb-tester/):  PD trigger Voltmeter ammeter  Current and Voltmeter USB tester QC4 + PD3.0 2.0 PPS fast charging protocol capacity test Small and exquisite: The voltmeter is small in size and light in weight, which is convenient for you to carry and store, and has a long service life. Convenient: The voltage voltmeter can be used to measure the voltage of your device, and it is very convenient to use. Amazing product: The voltmeter is equipped with a usb charging port, which can be used to charge multiple devices.  
- [FNIRSI® FNB48P USB Fast Charge Tester](https://digilogelectronics.com/product/fnirsi-fnb48p-usb-fast-charge-tester/): Integrated: USB-A, Micro-USB, Type-C interfaces Detects: Voltage, current, triggers Mobile communication: Fast charge 1.44-inch TFT LCD display External 16-bit ADC PD protocol physical chip Drive-free PC upgrade PD E-Marker read Fast charge recognition && deception PD protocol monitoring && conversion Precision measurement Data storage Energy capacity detection Multiple interfaces compatibility Fast charge protocol detection Supports: QC2.0, QC3.0, Huawei-FCP, Huawei-SCP, Samsung-AFC, PD protocol
- [FNIRSI® FNAC-28 2-IN-1 Type-C USB Tester Digital Voltmeter Ammeter Power Bank Charger Measure](https://digilogelectronics.com/product/fnirsi-fnac-28-2-in-1-type-c-usb-tester-digital-voltmeter-ammeter-power-bank-charger-measure/): The FNAC-28 USB Tester is a multifunctional USB voltage and current meter, as well as a quick charge trigger device for mobile communication terminals.   Features It features a full-color, ultra-wide viewing angle TFT LCD display and integrates multiple interfaces, including USB-A and Type-C male and female connectors, ensuring broad compatibility. Utilizing an external 16-bit ADC chip, it offers high measurement accuracy. This device can measure the power supply or consumption of USB interfaces, phone chargers, USB drives, and other products. It can also measure phone charging power, and the input and output conditions of power banks, and perform quick charge [...]
- [FNIRSI® FDM01 High-precision Digital Noise Decibel Meter](https://digilogelectronics.com/product/fnirsi-fdm01-high-precision-digital-noise-decibel-meter/): Free sensitivity Temperature and humidity detection Light alarm Mobile app intelligent linkage Conforms to International Committee IEC651TYPE2 and American International Standard ANSIS1.4TYPE2 standards Measurement range: 30dB-130dB Accuracy: ±1.5dB A-weighting responses, with fast and slow response rate selection “Automatic shutdown in 15 minutes” function Dual mode switching with adjustable sensitivity Diligently designed with attention to detail  
- [FNIRSI® FD10 Car OBD2 Scanner Clear Error OBD Diagnostic Tool](https://digilogelectronics.com/product/fnirsi-fd10-car-obd2-scanner-clear-error-obd-diagnostic-tool/): v5.1 plug-and-play Can be used in both Android/iOS 8 languages supported 360° full vehicle depth scanning Quickly read DTCs Intelligently adapt to all models Power supply: CAN_BUS/K_LINE/L_INE Metals: OBD Ⅱ standard interface Non-ferrous metals: ≤1W DC wire: 8V-28V Single-strand copper wire: -40℃ – +85℃  
- [FNIRSI® ERD-10 4-IN-1 Electromagnetic Radiation Detector](https://digilogelectronics.com/product/fnirsi-erd-10-4-in-1-electromagnetic-radiation-detector/): The ERD-10 is an electromagnetic radiation detector, a professional instrument used for measuring electromagnetic radiation. It is suitable for various application scenarios, such as homes, offices, vehicles, and outdoor environments. It features a 2.4-inch high-definition color screen and supports monitoring of electric field strength, magnetic field strength, radiation power, and environmental temperature.   Specifications Basic Parameters: Model ERD-10 Screen Material 2.4 inches Backlight Brightness adjustable Charging Power TYPE-C (5V/1A) Battery 1000mAh Languages Chinese, English Product Size ≈143×68×29mm Product Weight ≈143g Auto Shutdown off / 5 min / 10 min / 15 min   Magnetic Field: Range 0.01μT – 99.99μT Accuracy 0.01μT [...]
- [FNIRSI® DWS-200 Soldering Iron Station Kit Accessories](https://digilogelectronics.com/product/fnirsi-dws-200-soldering-iron-station-kit-accessories/): DWS-200 Soldering Iron Station Kit Accessories  
- [FNIRSI® DWS-200 200W Power Repaid Heating Soldering Iron Station Kit](https://digilogelectronics.com/product/fnirsi-dws-200-200w-power-repaid-heating-soldering-iron-station-kit/): DWS-200 is a 200W high-power precision soldering station launched by FNIRSI. It is a commonly used hand tool in electronic soldering processes. This product has a built-in high-power pure copper transformer, suitable for 100-240V voltage input, with a maximum power of 200W. Supports conversion from ℃ to ℉, adjustable temperature range 100℃~450℃/212℉~842℉. It also supports preset 3 sets of temperature values and can be connected to a soldering iron stand for standby induction. Use dynamic temperature curve mode to try monitoring data.   Brand FNIRSI Model DWS-200 Screen 2.8 lnch TFT Screen Temp Range 100°C~450°C / 212°F~842°F Peak Power 200W(Max) Input [...]
- [FNIRSI® DST-210 / DST-201 Handheld 3-IN-1 Multimeter Oscilloscope Signal Generator](https://digilogelectronics.com/product/fnirsi-dst-210-dst-201-handheld-3-in-1-multimeter-oscilloscope-signal-generator/): The DST-201/DST-210 is a versatile multifunction tester developed by FNIRSI, tailored for electronics repair and R&D. This all-in-one device integrates multiple essential testing functions, addressing a broad spectrum of measurement requirements.   Key Features: High-precision oscilloscope function:FNIRSI DST-201 provides a sampling rate of 5MSa/s and an analog bandwidth of 1MHz, DST-210 provides a sampling rate of 48MSa/s and an analog bandwidth of 10MHz, ensuring waveform analysis. It is equipped with voltage protection up to ±400V, suitable for a wide range of applications. Multi-function signal generator function:Supports 13 waveforms with a frequency range of 0-10KHz and an adjustable output voltage of 3V. [...]
- [FNIRSI® DSO-TC4 3-IN-1 10MHz 48MSa/s Digital Oscilloscope Transistor Tester Signal Generator](https://digilogelectronics.com/product/fnirsi-dso-tc4-3-in-1-10mhz-48msa-s-digital-oscilloscope-transistor-tester-signal-generator/): DSO-TC4 is a multifunctional transistor oscilloscope launched by FNIRSI, which is comprehensive and practical, and is designed for the maintenance and R&D industries. It integrates an oscilloscope, a signal generator, and a transistor.   The main features of the product are: Oscilloscope functions: Sampling rate: 48MSa/s Analog bandwidth: 10MHz Voltage protection: ±400V Waveform storage: supports screenshot saving and viewing, which is convenient for data analysis Signal generator function: Supports 13 waveform outputs, frequency range 0-50KHz, output voltage adjustable 0-3v. Output parameters (frequency, amplitude, duty cycle) are adjustable, flexible to meet various needs Transistor function: High efficiency: Automatically identify the type and [...]
- [FNIRSI® DSO-TC3 3-IN-1 Handheld 500KHz 10MS/s Digital Oscilloscopes Signal Generator Transistor Tester](https://digilogelectronics.com/product/fnirsi-dso-tc3-3-in-1-handheld-500khz-10ms-s-digital-oscilloscopes-signal-generator-transistor-tester/): FNIRSI DSO-TC3 combines a digital Electronic measuring instrument, electronic component tester, signal generator, continuity test, voltage test, temperature and humidity measurement, infrared decoding and other functions are skillfully integrated. It is equipped with a 2.4-inch color TFT display, built-in rechargeable lithium battery, brings users stronger and more practical functions with good portability. FNIRSI DSO-TC3 is an upgraded version of DSO-TC2. On the basis of DSO-TC2, it has upgraded capacitance ESR detection, function signal generator output, Electronic measuring instrument bandwidth and sampling rate improvement, input voltage and diode detection range increase and so on. The improvement in performance and function of DSO-TC3 [...]
- [FNIRSI® DSO-510 10MHz 48MS/s Mini Handheld Digital Oscilloscope Signal Generator](https://digilogelectronics.com/product/fnirsi-dso-510-10mhz-48ms-s-mini-handheld-digital-oscilloscope-signal-generator/): The DSO510 is a high-performance flagship oscilloscope, perfect for complex signal testing, research, and development. Designed with advanced functionality, it’s ideal for professionals managing intricate repairs or educational environments needing precise measurements.This oscilloscope offers a real-time sampling rate of 48MS/s and a 10MHz bandwidth, supporting both periodic analog and non-periodic digital signals. Equipped with complete trigger modes (Single, Normal, Auto), it provides reliable accuracy across a wide voltage measurement range of ±400V. The DSO510 also features an efficient one-click AUTO mode, displaying waveforms instantly without complicated adjustments.Additionally, it includes a built-in signal generator with a 50KHz output capability, allowing for versatile [...]
- [FNIRSI® DSO-153 2-IN-1 Mini 1MHz 5MS/s Digital Oscilloscope Waveform Generator](https://digilogelectronics.com/product/fnirsi-dso-153-2-in-1-mini-1mhz-5ms-s-digital-oscilloscope-waveform-generator/): The DSO153 combines performance and portability, making it an excellent tool for routine maintenance and educational use. It offers a well-rounded feature set suitable for general signal testing. This oscilloscope has a real-time sampling rate of 5MS/s, 1MHz bandwidth, and complete triggering function (single, normal, auto). It can be used freely for both periodic analog signals and non-periodic digital signals, and can measure up to ±400V voltage with an efficient one-click AUTO, which can display the measured waveform without complicated adjustments. Additionally, it features a function signal generator capable of outputting 14 types of signals (10KHz). Equipped with a 2.8-inch 320*240 [...]
- [FNIRSI® DSO-152 200KHz 2.5MS/s Mini Pocket Handheld Digital DSO Oscilloscope](https://digilogelectronics.com/product/fnirsi-dso-152-200khz-2-5ms-s-mini-pocket-handheld-digital-dso-oscilloscope/): The DSO152 is a compact, entry-level oscilloscope, designed for basic signal analysis and maintenance tasks. It provides essential oscilloscope functions in a lightweight and easy-to-carry design.It has a realtime sampling rate of 2.5MS/s, abandwidth of 200KHz, and complete trigger functions (single, normal, and automatic).It can be used freely for both periodic analog signals and nonperiodic digital signals, and can measure voltages up to ±400V.Equipped with an efficient one-key AUTO, it can display the measured waveform without cumbersome adjustments.Equipped with a 2.8-inch 320*240 resolution high-definition LCD screen. Built-in 1000mAh high-quality lithium battery, can be used continuously for about 4 hours after fully [...]
- [FNIRSI® DS215H 2-IN-1 50MHz 250MS/s Dual Channel Digital Oscilloscope DDS Function Singal Generator](https://digilogelectronics.com/product/fnirsi-ds215h-2-in-1-50mhz-250ms-s-dual-channel-digital-oscilloscope-dds-function-singal-generator/): FNIRSI-DS215H is a comprehensive and practical two-in-one dual-channel digital test instrument launched by FNIRSI, designed for the maintenance and R&D industries.   Key Features: High-precision measurement: The FNIRSI-DS215H offers high precision with a sampling rate of up to 250MS/s and a 50MHz analog bandwidth, ensuring accurate measurements for various applications. Wide voltage protection: Supports peak voltage measurements up to ±400V, offering reliable and safe performance in high-voltage scenarios. Waveform storage: The device supports screenshot saving and viewing, making data analysis more convenient and efficient. Signal generator functionality: It features 13 waveform outputs with a frequency range of 0-50 KHz, adjustable by [...]
- [FNIRSI® DPS-150 Mini DC Adjustable CNC Programmable Regulated Switching Power Supply](https://digilogelectronics.com/product/fnirsi-dps-150-mini-dc-adjustable-cnc-programmable-regulated-switching-power-supply/): The FNIRSI-DP150 is a high-performance adjustable DC power supply launched by our company. It features a Type-C input interface and multiple power supply modes, allowing precise adjustment of output voltage (0-30V) and current (0-5A). It provides efficient, low-consumption, and stable output, equipped with multiple safety protection functions including overvoltage, overcurrent, overload, overheating, and reverse connection. It can be flexibly applied to serial connection of multiple devices, with rich and user-friendly display and operation, compact and portable humanized design, meeting various application needs. It is designed to provide you with high-performance and stable CNC power supply.   Specifications Brand FNIRSI Model DPS-150 [...]
- [FNIRSI® DPOX180H 2-IN-1 Dual Channel 180MHz 500MS/s Digital Phosphor Oscilloscope Signal Generator](https://digilogelectronics.com/product/fnirsi-dpox180h-2-in-1-dual-channel-180mhz-500ms-s-digital-phosphor-oscilloscope-signal-generator/): The DPOX180H is a cost-effective, handheld dual-channel digital phosphor oscilloscope from FNIRSI, combining an oscilloscope and signal generator. It features a 500MSPS real-time sampling rate, 180MHz bandwidth, and a 2.8-inch high-contrast IPS LCD. With a refresh rate of up to 50,000 waveforms per second, it captures even rare signal anomalies. The ZOOM time base aids digital protocol analysis, and with 5mV sensitivity, it can measure small signals accurately. Key features include noise filtering, a high-precision digital trigger with three modes, and a DDS signal generator supporting up to 20MHz. Additional functions include one-button auto adjustment, waveform storage for up to 250 [...]
- [FNIRSI® DPOS350P 4-IN-1 350MHz 1GSPS Tablet Oscilloscope Signal Generator Spectrum Analyzer Frequency Response Analyzer](https://digilogelectronics.com/product/fnirsi-dpos350p-4-in-1-350mhz-1gsps-tablet-oscilloscope-signal-generator-spectrum-analyzer-frequency-response-analyzer/): 🚨 Please note: if the package is returned or destroyed due to unpaid customs duties, no refund will be issued under this circumstances. The United States and EU countries (Except Malta and Cyprus) are duty-free because they are shipped from local warehouses, while other countries may incur tariffs.   🎁 We will give each customer one case per machine as a gift, which will be sent together with the goods.   The DPOS350P is a high-performance, feature-rich all-in-one oscilloscope, suitable for a wide range of industrial and research applications. With its powerful integrated design, high sampling rate, and wide bandwidth, it [...]
- [FNIRSI® DMT-99 Intelligent Color Screen Digital Multi Meter](https://digilogelectronics.com/product/fnirsi-dmt-99-intelligent-color-screen-digital-multi-meter/): DMT-99 is FNIRSI’s newly launched 10000 count intelligent digital multimeter, with a wider measurement range and higher resolution, helping you measure more accurate values. It can accurately measure AC/DC voltage, AC/DC current, 10A current, and can also be used to test conductivity, capacitance, frequency, duty cycle, resistance, diode, temperature, NCV, live wire, etc. Suitable for various fields of electronic maintenance such as engineering, laboratories, cars, and home appliances. And it is equipped with a 2.4 inch full color TFT display,screen with a resolution of up to 240 * 320, Support DIY boot interface. A new UI interface design, and the first [...]
- [FNIRSI® DMC-100 DC AC Current Voltage Clamp Meter Digital Multimeter](https://digilogelectronics.com/product/fnirsi-dmc-100-dc-ac-current-voltage-clamp-meter-digital-multimeter/): FNIRSI DMC-100 is a 10,000-count high-precision intelligent clamp meter, covering 750V voltage and 600A current ultra-wide range, whether it is engineering maintenance, laboratory research, or vehicle overhaul, home electrical diagnostics, can be easy to handle.   Features High-Precision Measurement: 10,000-count True RMS intelligent clamp meter for accurate readings. Wide Measurement Range: Supports up to 750V voltage and 600A current. High-Quality Display: 2.0-inch 240 × 320 full-color TFT screen for clear visuals. Intuitive Interface: New UI with data curve display for easy reading at a glance. Three Measurement Modes: Switch freely between general measurement, waveform display, and power measurement modes. NCV Function: [...]
- [FNIRSI® CTG-20 Car Paint Coating Thickness Gauge](https://digilogelectronics.com/product/fnirsi-ctg-20-car-paint-coating-thickness-gauge/): CTG-20 is a coating thickness gauge used to measure the thickness of electroplated coatings or coatings on metal surfaces. It has the ability to measure the thickness of non magnetic coating (such as paint) on magnetic materials such as steel/iron, as well as the thickness of coating (such as paint) on non magnetic materials such as aluminum. Built in precision probe, lithium battery charging. Automatically detect substrate properties and detect coating thickness through electromagnetic induction and eddy current effects. This instrument can non-destructive measure the thickness of the coating, with fast speed and high accuracy. Widely used in manufacturing, chemical industry, [...]
- [FNIRSI® C1 Type-C PD Trigger USB-C Voltmeter Ammeter Fast Charging Protocol Tester](https://digilogelectronics.com/product/fnirsi-c1-type-c-pd-trigger-usb-c-voltmeter-ammeter-fast-charging-protocol-tester/): Brand FNIRSI Model C1 Dimensions 50*25*8cm Weight 47g / 1.66oz Display Type Digital Only Power Supply DC Operating Temperature -10℃ ~ +80℃ Accuracy Class 0.1% Monitor Voltage Range: 4~24VResolution: 0.00001VAccuracy: ±(0.2‰+2) Monitor Current Range: 0~6.5AResolution: 0.00001AAccuracy: ±(0.5‰+2) Monitor Power Range: 0~130WResolution: 0.00001WAccuracy: ±(0.5‰+2) Load Equivalent Internal Resistance Range: 0~9999.9ΩResolution: 0.0001ΩAccuracy: ±(0.5‰+2) D+/D- Voltage Range: 0~3.3VResolution: 0.001VAccuracy: ±(1.0‰+2) Capacity Range: 0~9999.99AhResolution: 0.00001Ah Energy Used Range: 0~9999.99WhResolution: 0.00001Wh Internal Resistance of The Cable Range: 0~9999.9ΩResolution: 0.0001Ω Equipment Running Time Range: 99d 23h 59m 59sResolution: 1 second Record Time Range: 999h 59m 59sResolution: 1 second Compatibility Issues： ①There may be incompatibilities problems of the [...]
- [FNIRSI® 5012H 100MHz 500MS/s Digital Handheld Pocket Oscilloscope](https://digilogelectronics.com/product/fnirsi-5012h-100mhz-500ms-s-digital-handheld-pocket-oscilloscope/): Versatile, practical, cost-effective handheld oscilloscope for maintenance and R&D industries Real-time sampling rate of up to 500MS/s and 100MHz analog bandwidth Full trigger function for periodic analog and non-periodic digital signals Built-in high voltage protection module (up to 400V continuous voltage, 600V peak voltage) Large time base scan mode for monitoring slow level changes High-efficiency one-button AUTO for easy waveform display High-definition LCD screen with 320*240 resolution Convenient waveform storage function with 64M built-in storage space (up to 2000 waveform pictures) Powerful waveform file manager with thumbnail browsing, viewing, and deletion capabilities Built-in 3000mAh lithium battery for 8 hours of continuous [...]
- [FNIRSI® 2C53T 50MHz 250MS/s Handheld 3in1 Oscilloscope Multimeter Signal Generator](https://digilogelectronics.com/product/fnirsi-2c53t-50mhz-250ms-s-handheld-3in1-oscilloscope-multimeter-signal-generator/): 🧾 Product Description The FNIRSI-2C53T is a powerful 3-in-1 dual-channel digital oscilloscope, combining the features of an oscilloscope, a multimeter, and a signal generator — all in one compact device. Designed for technicians, engineers, students, and electronics hobbyists, it’s perfect for research, troubleshooting, and lab work. Built with FPGA + ARM + ADC hardware architecture, it offers a sampling rate of 250MS/s and a 50MHz analog bandwidth, ensuring high accuracy and performance. The oscilloscope supports ±400V peak voltage, waveform saving, and viewing for detailed analysis. Its 4.5-digit True RMS multimeter can accurately measure AC/DC voltage, current, resistance, capacitance, diode, temperature, and [...]
- [FNIRSI® 2C53P 3-IN-1 50MHz 250MS/s Dual Channel Tablet Touchable Oscilloscope Multimeter DDS Generator](https://digilogelectronics.com/product/fnirsi-2c53p-3-in-1-50mhz-250ms-s-dual-channel-tablet-touchable-oscilloscope-multimeter-dds-generator/): FNIRSI 2C53P is a dual-channel digital oscilloscope with comprehensive functions and high practicality. This device has 3 major functions: 1. The oscilloscope adopts FPGA+MCU+ADC hardware architecture, has a sampling rate of 250MS/s, an analog bandwidth of 50MHz, and supports a peak voltage measurement of ±400V; It supports waveform screenshots, saving, and viewing; 2. Built-in 4.5-digit 19999-point true RMS multimeter, supports AC and DC voltage and current measurements; 3. The built-in function signal generator can output 12 kinds of function signals, with a maximum output frequency of 10MHz, and the output frequency, amplitude, and duty cycle are adjustable. It uses a 4.3-inch [...]
- [FNIRSI® 2C23T Handheld Dual Channel 3-in-1 10MHz 50MS/s Oscilloscope Multimeter DDS Function Generator](https://digilogelectronics.com/product/fnirsi-2c23t-handheld-dual-channel-3-in-1-10mhz-50ms-s-oscilloscope-multimeter-dds-function-generator/): The FNIRSI-2C23T is a versatile 3-in-1 dual-channel digital oscilloscope designed for maintenance and development work. It combines an oscilloscope, multimeter, and signal generator in one device. The oscilloscope features FPGA+MCU+ADC architecture, 50 MS/s sampling rate, 10 MHz bandwidth, and high-voltage protection, supporting peak voltage measurements up to ±400V. It allows saving and analyzing waveform screenshots. The multimeter offers 4-digit, 10,000-point true RMS measurements for AC/DC voltage, current, resistance, capacitance, diode, and continuity. The built-in DDS signal generator outputs 7 signal types, with adjustable frequency (up to 2 MHz), amplitude, and duty cycle. The device has a 2.8″ high-definition LCD (320×240 resolution) [...]
- [FNIRSI® 1C15 110MHz 500MS/s Handheld Mini Digital Oscilloscope](https://digilogelectronics.com/product/fnirsi-1c15-110mhz-500ms-s-handheld-mini-digital-oscilloscope/): High Performance: 500M sampling, 110MHz bandwidth. Durable Design: Silicone sleeve, non-slip, anti-drop. Enhanced Control: Joystick for easier operation. Long Battery Life: 3000mAH, over 10 hours. Quick Auto Function: Capture waveforms like desktop. Ample Storage: 81 waveform pictures. Versatile Modes: Persistence, scrolling for detection, recording. Maintenance, R&D: Comprehensive, cost-effective.
- [FNIRSI® 1014D 2-IN-1 Dual Channel 100MHz 1GS/s Digital Oscilloscope Signal Generator](https://digilogelectronics.com/product/fnirsi-1014d-2-in-1-dual-channel-100mhz-1gs-s-digital-oscilloscope-signal-generator/): **Advanced Signal Analysis and Generation**The FNIRSI-1014D Digital Oscilloscope is a versatile tool designed for both hobbyists and professionals in the electrical field. With a dual channel input and a 100MHz*2 analog bandwidth, this oscilloscope is capable of capturing signals with precision and clarity. The 1GSa/s real-time sampling rate ensures that even the fastest signals are captured without any loss of detail. The oscilloscope’s trigger modes, including single, normal, and auto, allow for flexible triggering options, making it suitable for both periodic and aperiodic signals. **Comprehensive Signal Generation and Storage**The FNIRSI-1014D oscilloscope is not just a signal analyzer; it doubles as a [...]
- [FNIRSI® 1013D Tablet Dual Channel 100MHz 1GS/s Touchable Panel Oscilloscope](https://digilogelectronics.com/product/fnirsi-1013d-tablet-dual-channel-100mhz-1gs-s-touchable-panel-oscilloscope/): The FNIRSI-1013D is a dual-channel oscilloscope designed for R&D and maintenance, offering a 1GSa/s real-time sampling rate and 100MHz bandwidth per channel. It supports various trigger modes (single/normal/auto) and can handle up to 400V with built-in high-voltage protection. The 7-inch 800×480 touchscreen provides easy control with one-key AUTO function for quick waveform display. It includes convenient features like cursor measurements, peak detection, and built-in 1GB storage for up to 1000 screenshots and waveforms. The oscilloscope also supports USB connectivity for data sharing, and its 6000mAh battery lasts up to 4 hours on a single charge, usable even while charging.   Features [...]
- [STM Sinewave Inverter Drive Module (Grid Sharing) + CT + Hybrid Style Display Board](https://digilogelectronics.com/product/stm-sinewave-inverter-drive-module-grid-sharing-ct-hybrid-style-display-board/): Data Sheet Click here to download the Data Sheet. Premium Quality Products designed for reliability and durability. Fast Shipping Quick delivery to your doorstep. Secure Payments Multiple safe payment options are available. STM Sinewave Inverter Drive Module (Grid Sharing) + CT + Hybrid Style Display Board Description: High-Efficiency Sinusoidal Pulse Width Modulation Board with Compact Design and Versatile Functionality. Specifications: Feature Details Operating Voltage 5V DC Carrier Frequency 6 kHz, 12 kHz, and 18 kHz (User selectable) Output Frequency 50Hz (fixed) Operating Temperature 0?C ~ 55?C Operating Mode Unipolar, Bipolar (User selectable) Dimensions 51mm x 28mm PWM Output 3.3 volts, 20 [...]
- [STM Sinewave Inverter Drive Module (Grid Sharing) + CT + LCD 20x4 display board + cable set](https://digilogelectronics.com/product/stm-sinewave-inverter-drive-module-grid-sharing-ct-lcd-20x4-display-board-cable-set/): Data Sheet Click here to download the Data Sheet. Premium Quality Products designed for reliability and durability. Fast Shipping Quick delivery to your doorstep. Secure Payments Multiple safe payment options are available. STM Sinewave Inverter Drive Module (Grid Sharing) + CT + LCD 20×4 display board + cable set Description: High-Efficiency Sinusoidal Pulse Width Modulation Board with Compact Design and Versatile Functionality. Specifications: Feature Details Operating Voltage 5V DC Carrier Frequency 6 kHz, 12 kHz, and 18 kHz (User selectable) Output Frequency 50Hz (fixed) Operating Temperature 0?C ~ 55?C Operating Mode Unipolar, Bipolar (User selectable) Dimensions Board: 120 x 90 mm, [...]
- [STM Sinewave Inverter Drive Module (Grid Sharig) + CT + 3.5" TFT Display + Cable](https://digilogelectronics.com/product/stm-sinewave-inverter-drive-module-grid-sharig-ct-3-5-tft-display-cable/): ??/td> Data Sheet Click here to download the Data Sheet. ??/td> Premium Quality Products designed for reliability and durability. ?? Fast Shipping Quick delivery to your doorstep. ?? Secure Payments Multiple safe payment options are available. STM Sinewave Inverter Drive Module (Grid Sharig) + CT + 3.5″ TFT Display + Cable Description: High-Efficiency Sinusoidal Pulse Width Modulation Board with Compact Design and Versatile Functionality. Specifications: Feature Details Operating Voltage 5V DC Carrier Frequency 6 kHz, 12 kHz, and 18 kHz (User selectable) Output Frequency 50Hz (fixed) Operating Temperature 0?C ~ 55?C Operating Mode Unipolar, Bipolar (User selectable) Dimensions 51mm x 28mm [...]
- [STM Sinewave Inverter Drive Module (Grid Sharing) + CT](https://digilogelectronics.com/product/stm-sinewave-inverter-drive-module-grid-sharing-ct/): ??/td> Data Sheet Click here to download the Data Sheet. ??/td> Premium Quality Products designed for reliability and durability. ?? Fast Shipping Quick delivery to your doorstep. ?? Secure Payments Multiple safe payment options are available. STM Sinewave Inverter Drive Module (Grid Sharing) + CT High-Efficiency Sinusoidal Pulse Width Modulation Board This advanced SPWM board with grid-sharing functionality is engineered for high performance and flexibility in various electronic systems. Ideal for projects that require precise sinusoidal waveforms, this board ensures stable operation and efficient signal generation. Specifications Feature Details Operating Voltage 5V DC Carrier Frequency 6 kHz, 12 kHz, and 18 [...]
- [STM Sinewave Inverter Drive Module + 3.5" TFT Display + Cable](https://digilogelectronics.com/product/stm-sinewave-inverter-drive-module-3-5-tft-display-cable/): ??/td> Data Sheet Click here to download the Data Sheet. ??/td> Premium Quality Products designed for reliability and durability. ?? Fast Shipping Quick delivery to your doorstep. ?? Secure Payments Multiple safe payment options are available. STM Sinewave Inverter Drive Module + 3.5″ TFT Display + Cable Description: High-Efficiency Sinusoidal Pulse Width Modulation Board with TFT LCD Display and Control Buttons ??Interactive Visual Interface. Specifications: Feature Details Operating Voltage 5V DC Carrier Frequency 6 kHz, 12 kHz, and 18 kHz (User selectable) Output Frequency 50Hz (fixed) Operating Temperature 0?C ~ 55?C Operating Mode Unipolar, Bipolar (User selectable) Dimensions Board: 112 x [...]
- [STM Sinewave Inverter Drive Module (Pin to pin replacement for dsPIC30F2010)](https://digilogelectronics.com/product/stm-sinewave-inverter-drive-module-pin-to-pin-replacement-for-dspic30f2010/): Pin to pin replacment for dsPIC30F2010 uController ??/td> Premium Quality Products designed for reliability and durability. ?? Fast Shipping Quick delivery to your doorstep. ?? Secure Payments Multiple safe payment options are available. STM Sinewave Inverter Drive Module High-Efficiency Sinusoidal Pulse Width Modulation Board This high-performance SPWM board is designed for precision and efficiency and is suitable for various electronic applications. DataSheet Specifications Feature Details Operating Voltage 5V DC Carrier Frequency 6 kHz, 12 kHz and 18 kHz (User-selectable) Output Frequency 50Hz (Fixed) Dimensions 51mm x 22mm Operating Temperature 0?C to 55?C Operating Modes Modified Unipolar/Bipolar (User-selectable) Audible Warnings Integrated DC [...]
- [Inverterzone Solar WiFi Dongle – Real-Time Solar Monitoring & Smart Inverter Control](https://digilogelectronics.com/product/inverterzone-solar-wifi-dongle-real-time-solar-monitoring-smart-inverter-control/): 📝 Product Description The Inverterzone Solar WiFi Dongle is designed to make your solar system smarter and easier to manage. With this device, you can connect your inverter to your home Wi-Fi and control everything directly from your phone. Through the Inverterzone mobile app (free on Android and iOS), you can: 📊 See real-time solar generation and grid usage ⚙️ Change inverter settings without needing a technician 🕒 Set timers to switch between grid and solar power 🔋 Manage solar or grid charging schedules 📡 Get alerts for changes in power usage or solar production 📖 View historical data to track [...]
- [PL2303 TA Download Cable USB to TTL RS232 Module USB to Serial](https://digilogelectronics.com/product/pl2303-ta-download-cable-usb-to-ttl-rs232-module-usb-to-serial/): This is PL2303 TA Download Cable USB to TTL RS232 Module USB to Serial. The cable is the easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB to Serial conversion chip and at the end of the 1M cable are four wire – red power, black ground, white RX into the USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V levels for interfacing with the most common 3.3V logic level chipsets. Because of the separated pin plugs, [...]
- [CR2032 CR2025 Coin Battery Socket Holder-5Pcs](https://digilogelectronics.com/product/cr2032-cr2025-coin-battery-socket-holder-5pcs/): CR2032 CR2025 Coin Battery Socket Holder, a Plastic Holder small size, easy to carry, save power and protect environment With the CR2032 CR2025 General Button Battery Holder Case, best for Soldering /Connecting CR2032 / CR2025 Holder Generally used for holding 3v Lithium coin batteries. PCB mountable 3v Battery holders which can be soldered directly to PCBs. It is very Easy to install and use. Can be used for experimental boards, toys and small robots etc. It is also suitable for 3V Lithium Coin batteries used in Laptops / Computers / Notebooks etc. Features CR2032 / CR2025 Holder Generally used for holding 3v Lithium [...]
- [3.7V Lithium Battery Protection Board for Polymer 18650 Bonding Pad (can Spot/Weld) 3A Overcurrent Value](https://digilogelectronics.com/product/3-7v-lithium-battery-protection-board-for-polymer-18650-bonding-pad-can-spot-weld-3a-overcurrent-value/): 3.7V Lithium Battery Protection Board for Polymer 18650 Bonding Pad (can Spot/Weld) 3A Overcurrent Value. The BMS is used for li-ion battery without balancing function Features High-accuracy voltage detection circuit; The terminal of the charger uses high voltage device; Built-in three-stage over-current detection circuit (over-current 1, over-current 2, load short circuit); MOS transistor can control the battery charge and discharge; Specification Over charge voltage: 4.25±0.05V Overcharge release voltage:4.23±0.05V Over-discharge voltage:2.54±0.1V Maximal continuous charging current: 2A Maximal continuous Discharging current: 2A Over-current protection: 3A Size: L40*W4*T3mm Weight: 1g  
- [250W High Power Constant voltage Current Adjustable Aluminum Substrate LED Driver Module](https://digilogelectronics.com/product/250w-high-power-constant-voltage-current-adjustable-aluminum-substrate-led-driver-module/): The 250W High Power Constant voltage Current Adjustable Aluminum Substrate LED Driver Module can be used to get adjustable output voltage ranges from 10V to 50V. The module provides a wide range of current output up to 6 A. Aluminium substrate itself  work as a heat sink which manages to run the module at high power application continuously The Module is made from a dedicated benchmark IC and high-precision current sensing resistor, proving a more stable constant current, (when 20°C to 70°C constant current 1A, temperature drift less than 1%). and therefore it is particularly most suitable for LED driver applications. [...]
- [MB102 830 Points Breadboard+Power Supply+140 Jumper Wires Kit](https://digilogelectronics.com/product/mb102-830-points-breadboardpower-supply140-jumper-wires-kit/): This is MB102 830 Points Breadboard+Power Supply+140 Jumper Wires Kit for Arduino DIY Starter Kit. An MB102 830 Points Solderless Prototype PCB Breadboard is an invaluable tool for experimenting with circuit designs whether in the R&D or university lab. A breadboard is used to make up temporary circuits for testing or to try out an idea. No soldering is required so it is easy to change connections and replace components. This is a 3.3V/5V MB102 Breadboard Power Supply Module which provides a dual 5 V and 3.3 V power rails and has a multi-purpose female USB socket. The 3.3V/5V MB102 Breadboard Power Supply Module securely [...]
- [2 x 8 cm Universal PCB Prototype Board Double-Sided – 2pcs](https://digilogelectronics.com/product/2-x-8-cm-universal-pcb-prototype-board-double-sided-2pcs/): 2 x 8 cm Universal PCB Prototype Board Double-Sided High-quality universal prototyping board with standard 0.1″ spacing through holes. High-quality 2 x 8 cm FR4 material, Double sided, HASL, NC CNC drilled.  
- [Mini Router UPS Board 40W V2.6 - Reliable Backup Power](https://digilogelectronics.com/product/mini-router-ups-board-40w-v2-6-reliable-backup-power/): Mini Router UPS Board 40W V2.6 – High-Quality Backup Power Solution The Mini Router UPS Board 40W V2.6 is widely recognized as one of the best UPS router boards. Fi t, it offe international-grade quality, ensuring dependable performance. Next, it is specifically designed to prevent router restarts during power fluctuations, providing uninterrupted service. Additionally, it includes advanced high voltage output protection, safeguarding your device. Moreover, its compact SMD components help maintain a small form factor. Finally, this board ensures optimal performance and reliability, making it a top choice for use Key Features of the Mini Router UPS Board V2.6 Supports maximum output of 47.5W with high accuracy (99%) Multiple output ports: Port 1 – 12V 1.5A Port 2 [...]
- [PC817 Optocoupler Isolation Module](https://digilogelectronics.com/product/pc817-optocoupler-isolation-module/): This is a PC817 2/4 Channel Optocoupler Isolation Board. Onboard with 4-Channel 817 are independent, so they can achieve different voltage control at the same time. Using 4-way 817 optocoupler, to achieve the control signal and the control signal isolation, you can directly use the microcontroller or other devices IO port to achieve voltage isolation control, you can achieve a small voltage control, the control side can be an external transistor MOS tube or different voltage levels Of the device interface. Applications I/O Isolation for MCUs (Micro Controller Units) Noise Suppression in Switching Circuits Signal Transmission Between Circuits of Different Potentials [...]
- [D4184 Mosfet control Module Replacement Relay](https://digilogelectronics.com/product/d4184-mosfet-control-module-replacement-relay/): With optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference. PWM speed regulation widely used to control the start and stop of the motor. The signal input side can be welded to the terminal or pin itself, compatible breadboard output can be soldered to the terminal or direct wire. Features Compatible with MCU and control board, 3V or 5V signal. High-level start, low-level stop, PWM speed regulation. Widely used to control the start and stop of the motor, solenoid valve, and other tributary equipment. The signal input side [...]
- [SONOFF RE5V1C Wifi DIY Switch 5V DC Relay Module](https://digilogelectronics.com/product/sonoff-re5v1c-wifi-diy-switch-5v-dc-relay-module/): This is a SONOFF RE5V1C Wifi DIY Switch 5V DC Relay Module. The 5VDC input, nano size, and dry-contact output make it different from Traditional SONOFF product, this product is a wireless switch supports inching /self-locking mode. Users can add the device to the APP eWeLink in order to remotely control connected home appliances or devices. Features Nano Size Dry Contact Output  5VDC low voltage input self-locking and inching mode Turn on/off the device even when WiFi has no Internet access Free iOS and Android mobile App eWeLink  
- [XH-M131 DC 12V Light Control Switch Photoresistor Relay Module](https://digilogelectronics.com/product/xh-m131-dc-12v-light-control-switch-photoresistor-relay-module/): Buy the new XH-M131 DC 12V Light Control Switch Photoresistor Relay Module. The Light Detection and brightness detection, detection can be adjusted via potentiometer brightness valve point comes relays, and do all kinds of brightness detection switch, you can control all kinds of street lights automatically turn on at night, during the day and automatically turns off and car supplies control and automation equipment. Using the photoresistor induction light intensity comes with the relay and direct control load. It has a Distribution bit sensitivity adjustment. The start relay threshold is set by adjusting the potentiometer. 12 V power input is designed [...]
- [LM1875 Mono Power Amplifier Board 30W Single Power Supply 12- 32V](https://digilogelectronics.com/product/lm1875-mono-power-amplifier-board-30w-single-power-supply-12-32v/): The LM1875 Mono Power Amplifier Board is a compact audio amplification solution delivering 30W of clear, high-quality sound with a single power supply ranging from 12 to 32V. Designed for mono applications, it ensures simplicity and efficiency. With the LM1875 amplifier chip at its core, this board offers reliable performance, making it an ideal choice for audio enthusiasts and hobbyists seeking a versatile and powerful amplifier solution. The wide voltage range allows flexibility in power supply selection, while the compact design enhances ease of integration into various audio systems. Features They are designed for mono applications, simplifying usage and offering a [...]
- [AVR ISP 10 Pin to 6 Pin Adapter Board](https://digilogelectronics.com/product/avr-isp-10-pin-to-6-pin-adapter-board/): This is 10 Pin to 6 Pin Adapter Board  AVR ISP USBASP STK500. The standard 10PIN  programmer can be used to interface to standard 6PIN Interface Converter. AVR MCU development board can be used to download Interface Converter and also an Arduino development board can be used for the ISP interface converter. Support Programmer : USBASP V2.0 (Not included with Adapter). USBASP V1.0 (Not included with Adapter). Features  Made of high-quality material, practical and durable No. of Pinon USBASP side: 10. No. of Pinon Device under programming side: 6. Connector type on USBASP side: Male. Connector type on Device under programming side: Female. Header Pin Pitch: 2.54mm (0.1in). Pin Numbers Text: Yes [...]
- [Non-Destructive MP3 Decoding Board with Self-Powered TF Card U Disk Decoded Player Module](https://digilogelectronics.com/product/non-destructive-mp3-decoding-board-with-self-powered-tf-card-u-disk-decoded-player-module/): The Non-Destructive MP3 Decoding Board with Self-Powered TF Card U Disk Decoded Player module is used for playing tracks in the MP3 format stored on a micro SD card or USB memory. The perfect device for playing messages on platforms, warning signals, etc. Superior sound quality. Onboard 2W mono amplifier (5V power of up to 3W) is connected to the speaker (recommendation 4 Ω 3W speakers), 3.5mm gold plated headphone jack can connect with headphones or external audio. With a MicroUSB port. Through the mobile power supply, 3.7V lithium battery, or USB 5V power supply. Support TF Card (mobile phone memory card) and U disk play mode. [...]
- [W25Q32 Large Capacity Flash Storage Module](https://digilogelectronics.com/product/w25q32-large-capacity-flash-storage-module/): The W25Q32JV (32M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins, and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP), and storing voice, text, and data. The device operates on a single 2.7V to 3.6V power supply with 1µA for power-down. All devices are offered in space-saving packages Features Support SPI interface Provide STM32 test code Using serial Nor flash external extender memory chip W25Q32  
- [HGLRC M80 GPS for FPV Racing Drone](https://digilogelectronics.com/product/hglrc-m80-gps-for-fpv-racing-drone/): The HGLRC M80 GPS is a handy device for FPV racing drones. It helps drones know where they are by using GPS technology, which means they can fly more accurately and even return to their starting point if needed. This GPS module is small and lightweight, fitting perfectly on racing drones without adding too much extra weight. Note: the old batch uses 115200 dps rate. Features GPS technology for precise positioning. Lightweight and compact design for FPV racing drones. Easy to install and integrate with existing drone setups. Supports various flight modes for versatile flying experiences. Specifications Item Name:HGLRC M80 GPS Chip:M8030 Power Supply:5V Antenna:Ceramic Antenna Receiving Format:GPS,GLONASS,GALILEO,QZSS,SBAS,BDS Receiving Channel:72 Searching Channel [...]
- [Raspberry Pi GPS Module USB Port](https://digilogelectronics.com/product/raspberry-pi-gps-module-usb-port/): Support the Raspberry Pi models A, B, A +, B +, Zero, 2. USB Port – GPS module contains T CP202USB serial interface chip, through a serial Port or USB and Raspberry Pi to communicate. L80 is integrated with the Patch antenna (5.0 * 5.0 * 5.0 mm) of compact modules, with ultra-low power consumption, the advantages of the fast positioning, in capturing and tracking, makes the USB Port – GPS has a very good performance. Features Suitable For Raspberry Pi A B A+ B+ Zero 2 3. Connect via 1*8 2.54 separation distance pin header or USB micro data cable. Adopting L80-39 mold project, with 15 x 15 x 4mm Patch aerial. Super low power consumption, quick location. Support Short-circuit Protection and Aerial Detection. Support self-auxiliary AGPS (EASY technology), no need for [...]
- [Arduino MKR Therm Shield ASX00012](https://digilogelectronics.com/product/arduino-mkr-therm-shield-asx00012/): The MKR THERM Shield allows a board of the MKR family to acquire temperatures from a thermocouple of type K and a DS18Bxx digital one-wire sensor. The Thermocouple is a kind of temperature sensor that offers high accuracy and a wide range of measured temperatures. Its analog nature requires specific interfacing and this shield relies on the MAX31855 thermocouple digital interface. The two connectors of the MKR THERM Shield allow the usage of Type K thermocouples with or without a plug attached to the metal wires. The MKR THERM Shield has its own library to read the temperature measured by the thermocouple. You may find [...]
- [Arduino MKR GPS Shield ASX00017](https://digilogelectronics.com/product/arduino-mkr-gps-shield-asx00017/): If you are experimenting with monitoring fleets, high-altitude scientific experiments, or any kind of project requiring localization of devices, the MKR GPS Shield will offer you the functionality you need, and it is plug ‘n’ play! The MKR GPS Shield is based on the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module. It is meant to be used on top of boards in the MKR format, but thanks to its Eslov connector, it is also possible to hook it up to any board having that kind of connector available using a cable. This module is designed to operate with different positioning [...]
- [Arduino MKR Relay Proto Shield TSX00003](https://digilogelectronics.com/product/arduino-mkr-relay-proto-shield-tsx00003/): The MKR Relay Proto Shield allows you to easily command relays with your MKR board. The shield provides two onboard relays and a small prototyping area if you need to add some other component to your project. The MKR Relay Protoshield allows you to easily add relays to your MKR board-based project. The shield provides two relays called RELAY1 and RELAY2 commanded by pin 1 and pin 2respectively. The shield also provides an easy connection utilizing screw terminal blocks to A1 to A4 analog inputs, I2C, and supply voltages. Features Two relays with NO, COM, and NC connections Works with battery-powered board 8 positions screw terminal [...]
- [XH-W1219 12V Digital Red+Green Display Temperature Controller Module W/ NTC Waterproof Temperature Sensor](https://digilogelectronics.com/product/xh-w1219-12v-digital-redgreen-display-temperature-controller-module-w-ntc-waterproof-temperature-sensor/): This is XH-W1219 12V Digital Red+Green Display Temperature Controller Module W/ NTC Waterproof Temperature Sensor. The XH-W1219 thermostat module with its µC and I/O (sensor input, keys, double display, relay) can be re-programmed for automation tasks, and it’s easy to work with. Digital thermostat module. The temperature controller/switch with waterproof NTC probe and integrated LED display in red and green. Note: This board is Nuvoton based. Button Functions : P0(Temperature Control Mode) »When first use this product; if you are using it for heating, please set H, if using it for cooling, please set C P1(Return Difference Setting) »Long press SET [...]
- [Turbidity Sensor Suspended Turbidity Value Detection Module Kit](https://digilogelectronics.com/product/turbidity-sensor-suspended-turbidity-value-detection-module-kit/): This is Turbidity Sensor Suspended Turbidity Value Detection Module Kit. The turbidity of water refers to the degree of turbidity caused by suspended substances such as silt, clay, organic matter, plankton and microorganisms contained in the water. Industrial-grade turbidity sensors or turbidity meters are expensive, and the cost is too high in the design of electronic products. Therefore, we have selected a turbidity sensor that is widely used in household appliances, washing machines, and dishwashers. The sensor uses optical principles to comprehensively judge the turbidity through the light transmittance and scattering rate in the solution. Inside the sensor is an infrared [...]
- [12V-40V10A DC Motor PWM Speed Control Switch Governor](https://digilogelectronics.com/product/12v-40v10a-dc-motor-pwm-speed-control-switch-governor/): The DC Motor Speed Controller allows controlling the speed of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 10%-100%. The motor speed controller can provide a continuous current of 8A to your DC motor or other DC load. The circuit also includes a 10A fuse, with the reverse connection of the power supply and control voltage over-voltage protection function. Note: This can NOT be used to the BRUSHLESS motor. The controller is NOT reverse-polarity protected and will be damaged if it connects the supply voltage with the wrong polarity. Features Control the speed [...]
- [5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module (Low level Trigger)](https://digilogelectronics.com/product/5v-2a-8-channel-ssr-g3mb-202p-solid-state-relay-module-low-level-trigger/): This 5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module (Low level Trigger) is based on the G3MB SSR relay which can control up to 2A at 240VAC. This is an 8 Channel SSR relay module, each relay channel has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed). A Solid State Relay is similar to a mechanic relay where it can be controlled through a digital signal. Solid State Relay generates no noise and has a much longer lifespan in compared to the traditional mechanic relay. When the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity [...]
- [PIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 4 mm)](https://digilogelectronics.com/product/pic-k150-usb-automatic-develop-microcontroller-programmer-with-icsp-cable-body-width-4-mm-2/): The PIC K150 USB Automatic Develop Microcontroller Programmer With ICSP Cable is a low-cost high-performance PIC programmer. This supports most popular PIC chips, programmed, readout, encryption, use a high-speed USB communication, fast programming. The programming quality is stable and reliable. (speed average PICSTART + 3-5 times) fully automatic programming checksum. This is equipped with 40pin DIP programming Block, direct programming of 8pin – 40pin DIP chip. 8 pin-40 pin chip other than through the onboard the ICSP interface online to download software. Software-compatible with PIC K150 is the Windows98 and Windows2000/NT, Windows XP/windows7/ Windows 8/ Windows 10 operating system. The new device will vary with the PIC escalating. Master chip retains the DIP package [...]
- [PIC K150 USB Automatic Develop Microcontroller Programmer with ICSP Cable (Body width: 4 mm)](https://digilogelectronics.com/product/pic-k150-usb-automatic-develop-microcontroller-programmer-with-icsp-cable-body-width-4-mm/): The PIC K150 USB Automatic Develop Microcontroller Programmer With ICSP Cable is a low-cost high-performance PIC programmer. This supports the most popular PIC chips, programmed, readout, encryption, use of high-speed USB communication, and fast programming. The programming quality is stable and reliable. (speed average PICSTART + 3-5 times) fully automatic programming checksum. This is equipped with a 40pin DIP programming Block, and direct programming of an 8pin – 40pin DIP chip. 8 pin-40 pin chip other than through the onboard the ICSP interface online to download software. Software compatible with PIC K150 is the Windows98 and Windows2000/NT, Windows XP/windows7/ Windows 8/ [...]
- [VS1053 MP3 Recording Module Development Board with Onboard Recording Function](https://digilogelectronics.com/product/vs1053-mp3-recording-module-development-board-with-onboard-recording-function/): This VS1053 MP3 recording module development board with onboard recording function can record and playback a variety of music formats, support for OGG encoding real-time recording. VS1053 is in addition to playing a variety of music formats but also supports the OGG real-time encoding recording. SPI interface, control signal lines are extracted. The module has an onboard TF SD card slot to store the record data as well as playback whenever you want, or you can easily transport the recorded MP3 file to any device via SD card. The module has two separate 3.5 mm jacks for audio Out & Microphone [...]
- [DRV8833 2 Channel DC Motor Driver](https://digilogelectronics.com/product/drv8833-2-channel-dc-motor-driver-2/): DRV8833 is a dual H-bridge motor driver IC that can be used for bidirectional control of two brushed DC motors at 2.7 V to 10.8 V. It can supply up to about 1.2 A per channel continuously and can tolerate peak currents up to 2 A per channel for a few seconds, making it an ideal driver for small motors that run on relatively low voltages. The board ships populated with SMD components, including the DRV8833, and adds an FET for reverse battery protection. The DRV8833 has a higher peak current rating (2 A per channel vs 1.5 A), optional built-in [...]
- [7-24V Modbus RTU 4 Channel RS232 Serial Relay Module](https://digilogelectronics.com/product/7-24v-modbus-rtu-4-channel-rs232-serial-relay-module/): The 7-24V Modbus RTU 4 Channel RS232 Serial Relay Module is a powerful industrial control solution. With four relay channels, it offers precise and simultaneous control of multiple devices. Utilizing the Modbus RTU protocol and RS232 serial communication, it seamlessly integrates into automation systems. The module supports a versatile 7-24V input voltage range, providing flexibility in power supply configurations. Its robust design, LED indicators, and industrial-grade construction make it ideal for diverse applications, delivering reliable and efficient relay-based control in demanding industrial environments. Features Allows simultaneous control of up to four devices, enhancing flexibility in automation setups. Built to withstand challenging [...]
- [ISD1820 Recording Module Voice Board With On Board Mic and Loud Speaker](https://digilogelectronics.com/product/isd1820-recording-module-voice-board-with-on-board-mic-and-loud-speaker/): This is ISD1820 Recording Module Voice Board With On Board Mic and Loud Speaker. The ISD1820 Recording Module Voice Board is the real easy way to add Voice Recording (and Playback) to your project. The Module can be operated directly by using the 3 Push-Buttons or with every microcontroller (ex. Arduino). A microphone is implemented directly on the board, and you can connect any 8 Ohm Speaker. Your recordings are saved even without power due to the non-volatile storage on the ISD1820. This module uses the ISD1820 voice record and playback IC to record a single voice message of up to 10 seconds in length. [...]
- [DHT22 Digital Temperature and Humidity Sensor Module AM2302](https://digilogelectronics.com/product/dht22-digital-temperature-and-humidity-sensor-module-am2302/): If you are wandering to build a device that detects temperature and humidity from the atmosphere, then This sensor is needed for you. you can Purchase this sensor from Robu.in at a reasonable price. The DHT22 Digital Temperature and Humidity Sensor Module AM2302 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins needed). It’s fairly simple to use but requires careful timing to grab data. The only real downside of this sensor is you can [...]
- [ESP8266/ ESP-12F Module/ Serial WIFI Witty Cloud Development Board + MINI nodeMCU](https://digilogelectronics.com/product/esp8266-esp-12f-module-serial-wifi-witty-cloud-development-board-mini-nodemcu/): The ESP8266/ ESP-12F Module/ Serial WIFI Witty Cloud Development Board + MINI nodeMCU is cheap and small Wifi transceiver, a perfect solution for Home Automation and IoT applications. It can be the replacement for your NRF24L01, it can talk to your Wifi router directly through the UART MCU’s (Rx, Tx). The ESP-12 module is one of the most complete of the ESP family as it allows you to use the biggest amount of pins. You can program this module to work stand alone with the Arduino IDE or with LUA as NodeMCU. It has an LDR and a WS2812 LED already on board for your projects. The board comes with a CH40 micro USB module [...]
- [XD-42 5V/3.3V Dual Channel Solderless Breadboard Power Supply Module](https://digilogelectronics.com/product/xd-42-5v-3-3v-dual-channel-solderless-breadboard-power-supply-module/): This Small and compact XD-42 5V/3.3V Dual Channel Solderless Breadboard Power Supply Module can make your project easy and portable and you will not need to carry bulky power supplies with you. The module comes with a series diode, polarity reversal protection. The two-channel module can take DC 7V to 12V input through DC (Black ) Jack and can produce 3.3V and +5V on each separate channels. The module is having onboard Mini USB port to take input to the module. It also has an indicator LED to show power On/Off status and Voltage switching (between 3.3v or 5V ) button [...]
- [Micro SD Card Reader Module](https://digilogelectronics.com/product/micro-sd-card-reader-module/): Add the desired memory to your Arduino project to store the data, Media etc. Micro SD Card Reader Module also called Micro SD Adaptor which is designed for dual I/O voltages. The Module is a simple solution for transferring data to and from a standard SD card. The pinout is directly compatible with Not only with Arduino as shown in the diagram in below, but can also be used with other microcontrollers. Micro SD Card Reader Module has an SPI interface which is compatible with any sd card and it uses 5V or 3.3V power supply which is compatible with Arduino [...]
- [20A Range Current Sensor Module ACS712](https://digilogelectronics.com/product/20a-range-current-sensor-module-acs712/): The 20A Range Current Sensor Module ACS712 consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field in which the Hall IC converts into a proportional voltage. Sensing and controlling current flow is a fundamental requirement in a wide variety of applications including, over-current protection circuits, battery chargers, switching mode power supplies, digital watt meters, programmable current sources, etc. This ACS721 current module is based on the ACS712 sensor, which can accurately detect AC or DC current. The maximum AC or DC that can be detected can [...]
- [3.3V/5V MB102 Breadboard Power Supply Module](https://digilogelectronics.com/product/3-3v-5v-mb102-breadboard-power-supply-module/): This is a 3.3V/5V MB102 Breadboard Power Supply Module which provides a dual 5 V and 3.3 V power rails and has a multi-purpose female USB socket. The 3.3V/5V MB102 Breadboard Power Supply Module securely fits in a standard 400 or 800 tie points breadboard it also features reverse polarity protection, the module can take 6.5V to 12V input and can produce 3.3V and +5V. The module can also output 5V on USB connector or input through the USB connector. It’s a must-have product for experimenters those have to test/prototype electronic circuits on the breadboard. Pinout Diagram: Features  Breadboard power supply module, compatible [...]
- [PL2303HXD 6Pin USB TTL RS232 Convert Serial Cable](https://digilogelectronics.com/product/pl2303hxd-6pin-usb-ttl-rs232-convert-serial-cable/): PL2303HXD 6Pin USB TTL RS232 Convert Serial Cable is a low cost and high performance USB-to-Serial Bridge Controller. It can provide a convenient solution for connecting an RS-232. In addition, it is useful for the full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. The PL-2303HXD‘s highly compatible drivers could simulate the traditional COM port on most operating systems. So it allows the existing applications based on COM port to easily migrate and be made USB ready. This product is designed for laboratory, product testing, low-cost MCU communications, and other applications. There are Six leads  Red +5 V Black GND White RXD Green [...]
- [MAX7219 Dot Led Matrix Module MCU Control LED Display Module](https://digilogelectronics.com/product/max7219-dot-led-matrix-module-mcu-control-led-display-module/): This is Dot Led Matrix Module incorporating MAX7219 Driver chip. By using this dot LED module in your upcoming project,  you will be able to add some great cool animation. The individual module features 8×8 LED’s, each controlled very precisely by the MAX7219 driver to generate the color pattern you wish. The great advantage of using this is users will have control over all of the 64 LED by just connecting 3 output communication wires to microcontrollers like Arduino etc. Connecting the two modules is also very easy. Only connect the output pins of the previous breakout board to the input pins of the new module, thus with such [...]
- [CJMCU-34725 TCS34725 Color Sensor RGB Module](https://digilogelectronics.com/product/cjmcu-34725-tcs34725-color-sensor-rgb-module/): The CJMCU-34725 TCS34725 Color Sensor RGB Module provides digital return values for red, green, blue (RGB) and bright light sensing digital Mingguang induction return value. Color-sensitive photodiode integrated cut and localized infrared shading filter, to minimize the incident infrared spectrum components. So that color management more accurate. It has high sensitivity, wide dynamic range, and IR shading filters. The TCS3472 ideal for color-sensitive component solutions under varying light conditions and through attenuating materials. An IR blocking filter, integrated on-chip and localized to the color sensing photodiodes, minimize the IR spectral component of the incoming light and allows color measurements to be made accurately. The [...]
- [XH W1209 12V Digital Temperature Controller Module W/ Display and NTC Temp Sensor](https://digilogelectronics.com/product/xh-w1209-12v-digital-temperature-controller-module-w-display-and-ntc-temp-sensor-2/): XH W1209 12V Digital Temperature Controller Module With Display + NTC Sensor The XH W1209 is a low-cost and reliable 12V digital temperature controller with a 7-segment LED display, 3 control buttons, and a high-accuracy NTC temperature sensor. It allows you to automatically control ON/OFF of electrical devices based on temperature. It shows the current temperature in °C, and you can adjust settings like cooling/heating mode, delay time, high-temperature alarm, limits, and correction. This module is ideal for DIY projects, electronics, home automation, incubators, heaters, AC control, and safety cut-off systems. Main Functions Displays current temperature (°C) Set trigger temperature with [...]
- [AD620 Microvolt/Millivolt Voltage Amplifier Module](https://digilogelectronics.com/product/ad620-microvolt-millivolt-voltage-amplifier-module/): This is a High Precision Signal Amplifier Board/Voltage Amplifier Module based upon AD620 Instrumentation amplifier IC, Input voltage range: DC 3~12V, Amplification: adjustable 1.5~1000 times, Adjustable zero to improve accuracy. Can be used for AC, DC signal amplification. 1: Wide input range – This product adopts AD620 to amplify and can amplify microvolts and millivolts. Compared withLM358 on the market, it has high amplification precision and good linearity. The maximum voltage output range is ±10V. 2: Magnification –  The potentiometer is used to amplify the input signal. The magnification is up to 1000 times and can be adjusted only by a [...]
- [3V 6V 12V 24V 35V PWM DC Motor Speed Regulator](https://digilogelectronics.com/product/3v-6v-12v-24v-35v-pwm-dc-motor-speed-regulator/): 3V 6V 12V 24V 35V PWM DC Motor Speed Regulator is a Mini Style DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). Precautions DC motor governor input is DC, can not directly connect to the AC (for example home 220V AC), otherwise, it will burn! DC power supply positive and negative terminals do not reverse, otherwise, the governor may be damaged. The motor can be positive or negative when the direction of operation and expectations do not match, you can adjust the line order to change the direction. Adjust the potentiometer knob to change [...]
- [DHT22/AM2302 Digital Temperature & Humidity Sensor](https://digilogelectronics.com/product/dht22-am2302-digital-temperature-humidity-sensor/): DHT22/AM2302 Digital Temperature & Humidity Sensor is a premium quality Humidity & Temperature Sensor. You can buy this Sensor from RNSbot at a reasonable price. All DHT22/AM2302 Digital Temperature & Humidity Measurement Sensor, TECH1120 are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. DHT22/AM2302 Digital Temperature & Humidity Sensor is a low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins needed). It’s fairly simple to use but requires careful timing to grab data. The only real [...]
- [DS1302 RTC Real Time Clock Module with Battery](https://digilogelectronics.com/product/ds1302-rtc-real-time-clock-module-with-battery/): DS1302 is DALLAS company launched a trickle charge clock chip, containing a real-time clock/calendar and 31 bytes of static RAM, communicating through serial interface simple and single-chip microcomputer. The real-time clock/calendar circuit provides seconds, hours, days, weeks, months, years of information, a number of days in the month and leap year can automatically adjust. The clock operation instructions through the AM/PM decided to use 24 or 12-hour format. Between DS1302 and single-chip microcomputer can simply use synchronous serial communication method, only three lines: (1) RST (2) I/O reset the data line (3) SCLK serial clock. Clock /RAM read/write data to a [...]
- [TTL to RS485 Power Supply Converter Board 3.3V 5V Hardware Auto Control Module](https://digilogelectronics.com/product/ttl-to-rs485-power-supply-converter-board-3-3v-5v-hardware-auto-control-module/): TTL to RS485 module, RS485 to TTL signal, single-chip serial port, UART, lightning protection hardware, automatic flow direction control The power supply of this product is wide voltage (3.0V ~ 30V), which realizes the compatibility between 3.3V system and 5.0V system, and both 3.3V and 5.0V signals can be matched. This product is equipped with wiring terminals and silicone wire, used for direct wiring. All imported chips are used. It has powerful performance, lightning protection design, strong anti-interference ability, industrial grade, and 1-year warranty! It realizes the automatic flow direction control of the RS485 signal and the automatic switching of the [...]
- [SIM800L GPRS GSM Module Core Board Quad-band TTL Serial Port with the antenna](https://digilogelectronics.com/product/sim800l-gprs-gsm-module-core-board-quad-band-ttl-serial-port-with-the-antenna/): This is Small SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-band TTL Serial Port with the antenna, in this module two antennas have been included. SIM800L GSM/GPRS module is a miniature GSM modem, which can be integrated into a great number of IoT projects. You can use this module to accomplish almost anything a normal cell phone can; SMS text messages, make or receive phone calls, connecting to the internet through GPRS, TCP/IP, and more! To top it off, the module supports quad-band GSM/GPRS network, meaning it works pretty much anywhere in the world First is made of wire (which [...]
- [XY-L10A 10A Lead-acid Solar Storage Battery Charge Controller Module 6-60V](https://digilogelectronics.com/product/xy-l10a-10a-lead-acid-solar-storage-battery-charge-controller-module-6-60v/): For anyone who loves to utilise Batteries for electronics projects and other applications, battery health is quite an important factor to consider, as you will want your batteries to not only last a long time but also continue to deliver the power you want for as long as possible throughout their lifespans. Fortunately, this is a lot easier to do nowadays, with awesome Charging Modules like XY-L10A BMS 6-60V 30A Lithium Battery Charging Protection Module with LCD Display, which is a battery-health charging control unit designed to keep batteries or Cell Packs ranging between 6V and 60V DC fully charged, electrically [...]
- [XL4016E1 200W Step Down Power Supply Module](https://digilogelectronics.com/product/xl4016e1-200w-step-down-power-supply-module/): This XL4016E1 200W Step Down Power Supply Module with voltage rating 4-40VDC to 1.25-36VDC.This module is rated for a maximum power of 200W. The output current for the module can be increased to 8A with the addition of an external fan onto the heatsinks to cool the IC. Note: This Product is available in two different variants (XL4016E1 and HW-674) with the same working, we will ship it randomly. Features Adjustment method: first correct input power (between 4-40V) then multimeter to monitor the output voltage and adjust potentiometer (usually clockwise turn boost, buck turn counterclockwise), Input: IN+ input positive IN- input [...]
- [Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board](https://digilogelectronics.com/product/capacitor-touch-dimmer-constant-voltage-led-stepless-dimming-pwm-control-board/): The default function of the capacitor touch dimmer is a switch, dimming, with brightness memories LED touch dimming. It will light slowly when turning on the lights, and become dark slowly when turn off, which effectively avoid the stimulation to eyes. The lamp brightness can be adjusted by requirement, it is very to operate. It can touch in medium protection, such as glass, acrylic, plastic, ceramics and so on, which is very safe. PCB board(VCC,GND) is power input (LED+, LED-) is connected with the LED lamps of positive and negative level (fingerprint) touch area Copper skin area should be 2x3cm. T1=1, T2=1: Without [...]
- [HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor](https://digilogelectronics.com/product/hx711-dual-channel-24-bit-precision-a-d-weight-pressure-sensor/): The HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor is a Load Cell Amplifier breakout board; for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the module to your microcontroller you will be able to read the changes in the resistance of the load cell; and with some calibration. You’ll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control, or simple presence detection. The HX711 Weighing Sensor uses a two-wire interface (Clock and Data) for communication. Any microcontroller’s GPIO pins should [...]
- [36W 3A Short Distance IR Hand Sweep ON-OFF Sensor Module](https://digilogelectronics.com/product/36w-3a-short-distance-ir-hand-sweep-on-off-sensor-module/): 36W 3A Short Distance IR Obstacle Sensor Sweep Hand Sensor This is an IR sensor-based switching module that functions ON and OFF  by sweeping the palm over it from a 10 to 80 mm distance. This IR sensor can be used in a variety of applications in household appliances as well as automotive industrial applications.  The sensitivity of the product can be customized, can penetrate plastic, acrylic, glass, ceramic, and other non-metallic mediums, stable performance!  Features Power Rating: 36W. Current Capacity: 3A. Sensor Type: Infrared (IR). Activation Method: Hand Sweep ON-OFF. Short Distance Sensing: Designed for close-range detection. Touchless Control: Allows [...]
- [XH-M415 Micro Boost Module SX1308 Boost DC-DC Input 2-24 Output 3-28 Peak 2A](https://digilogelectronics.com/product/xh-m415-micro-boost-module-sx1308-boost-dc-dc-input-2-24-output-3-28-peak-2a/): The XH-M415 Micro Boost Module, powered by the SX1308 Boost DC-DC converter, accepts input voltages from 2-24V and delivers an output range of 3-28V with a peak current of 2A. Ideal for voltage-boosting applications, it provides efficient and reliable performance in a compact form factor. Note: Please allow a 1-3mm measuring deviation due to manual measurement.             Actual Products may vary in terms of color. Features XH-M415 Micro Boost Module SX1308 Boost DC-DC Converter Input: 2-24V, Output: 3-28V Peak Current: 2A Efficient Voltage Boosting  
- [IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi](https://digilogelectronics.com/product/irf520-mosfet-driver-module-for-arduino-arm-raspberry-pi/): IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi is a breakout board for the IFR520 MOSFET transistor. The module is designed to switch heavy DC loads from a single digital pin of your microcontroller. Here is a simple breakout board for the IRF520 Mosfet. Easy hookup to your Arduino or another 3-5v microcontroller. Pulse current through a PWM pin, and use this to control a pump, LED, or other DC device at up to 24v, and ~5A. Its main purpose of this IRF520 MOSFET Driver Module is to provide a low-cost way to drive a DC motor for robotics applications, but the module can [...]
- [AMS1117 3.3V Power Supply Module](https://digilogelectronics.com/product/ams1117-3-3v-power-supply-module/): This AMS1117 3.3V Power Supply Module is based on the AMS1117 3.3V regulator. It is capable of regulating a wide range of input voltage (4.0 to 12V) down to a fixed 3.3V output at up to 1A (Vin = 4.5V). Standard 0.1″ header pins provide a means of connecting to its input and output terminals. These header pins have also been conveniently placed so that the module can be inserted face down into standard Note: Do not exceed absolute maximum input voltage (12.5V) or output current. Exceeding maximum specifications can result in permanent damage to this module or any connected devices. Features [...]
- [XH-A232 TPA3110 30W+30W 2.0 Channel Digital Stereo Audio Power Amplifier Board](https://digilogelectronics.com/product/xh-a232-tpa3110-30w30w-2-0-channel-digital-stereo-audio-power-amplifier-board/): Build your own music system with dual 30W of stereo output. TPA3110 XH-A232 Dual Channel Digital Power Amplifier Board is a newly designed digital audio amplifier board with fine quality is practical to install and use also has good performance. It features a high-efficiency class D audio power amplifier with the latest and original TPA3110 core technology the BTL bridge circuit is more efficient than before. This product uses the double power supply transformer with a dynamic power supply range from 12V to 24V with high efficiency small quiescent current. Additionally, it is equipped with Perfect protection functions like overvoltage protection [...]
- [HC-SR04-Ultrasonic Range Finder](https://digilogelectronics.com/product/hc-sr04-ultrasonic-range-finder/): This HC-SR04-Ultrasonic Range Finder is a very popular sensor that is found in many applications where it requires measuring distance and detecting objects. The module has two eyes like projects in the front which forms the Ultrasonic transmitter and Receiver.  The HC-SR04 ultrasonic sensor uses sonar to determine the distance to an object like bats or dolphins do. This Ultrasonic Sensor module is a transmitter, a receiver, and a control circuit in one single pack!! It has very handy and compact construction. It offers excellent range accuracy and stable readings in an easy-to-use package. Its operation is not affected by sunlight or black material like Sharp rangefinders are (although acoustically [...]
- [4000W High-Power Thyristor Electronic Regulator, Dimming Speed Regulation](https://digilogelectronics.com/product/4000w-high-power-thyristor-electronic-regulator-dimming-speed-regulation/): This is a 4000W Thyristor SCR Voltage Regulator Temperature Dimmer for Speed / Light (AC 220V). 4000W Thyristor SCR Voltage Regulator is SCR Dimmer which can be used to control 220V Appliances. It can be used as a light dimmer, fan speed controller, stove temperature controller. It is easy and simple to use and can control appliances up to 4000W! Just give AC input to the module and connect the appliance at the output of the module, then use the onboard potentiometer knob to adjust and set the required power output from your 220V Device. Appliances  Electric furnace,water heater,lamps,small motor,electric iron.etc [...]
- [PC817 4 CH Optocoupler Isolation Module](https://digilogelectronics.com/product/pc817-4-ch-optocoupler-isolation-module/): This is a PC817 4 Channel Optocoupler Isolation Board. Onboard with 4-Channel 817 are independent, so they can achieve different voltage control at the same time. Using 4-way 817 optocoupler, to achieve the control signal and the control signal isolation, you can directly use the microcontroller or other devices IO port to achieve voltage isolation control, you can achieve a small voltage control, the control side can be an external transistor MOS tube or different voltage levels Of the device interface. Applications I/O Isolation for MCUs (Micro Controller Units) Noise Suppression in Switching Circuits Signal Transmission Between Circuits of Different Potentials [...]
- [TP4056 1A Li-ion lithium Battery Charging Module – Mini USB](https://digilogelectronics.com/product/tp4056-1a-li-ion-lithium-battery-charging-module-mini-usb/): The TP4056 1A Li-Ion Lithium Battery Charging Module – Mini B USB is a 3.7V lithium battery charger module has onboard Mini USB interface. With Mini-USB onboard connector, you can directly connect to computer USB port for battery charging. If USB is not available you can use an external source voltage at IN+/IN- pads, great for DIY projects. It is small size and lightweight. Manufactured under fully machinery processing. Each module is tested OK before shipment from RNSbot  so it has high reliability for the best performance. In conclusion, it is special design for a single lithium battery charging. It uses the internal PMOSFET architecture which [...]
- [TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection](https://digilogelectronics.com/product/tp4056-1a-li-ion-battery-charging-board-micro-usb-with-current-protection/): Note: This Product is available in two different variants of IC  ( TP4056 and XL 4056A,HW-107 ) with the same working we will ship it randomly. This TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection is a tiny module, perfect for charging single cell 3.7V 1 Ah or higher lithium-ion (Li-Ion) cells such as 16550s that don’t have their own protection circuit. Based on the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished. Furthermore, when the battery voltage drops below 2.4V the protection IC will switch [...]
- [XH W1209 12V Digital Temperature Controller Module W/ Display and NTC Temp Sensor](https://digilogelectronics.com/product/xh-w1209-12v-digital-temperature-controller-module-w-display-and-ntc-temp-sensor/): This is XH W1209 12V Digital Temperature Controller Module W/ Display and NTC Temp Sensor. W1209 Mini thermostat Temperature controller is low-cost 12V Temperature controller with 7-segment display and 3 switch keypad for setting temperature and other parameters. The module features an NTC thermistor temperature sensing and has an accuracy of 0.1 C. The XH W1209 digital temperature controller Module W/ Display and NTC Waterproof Temperature Sensor is an incredibly low cost yet highly functional thermostat controller. With this module, you can intelligently control power to most types of electrical devices based on the temperature sensed by the included high accuracy NTC temperature sensor. We can display the [...]
- [MAX31865 PT100-PT1000 RTD Platinum Resistance Temperature Detector Module](https://digilogelectronics.com/product/max31865-pt100-pt1000-rtd-platinum-resistance-temperature-detector-module/): For precision temperature sensing, nothing beats a MAX31865 RTD Platinum Resistance Temperature Detector Module PT100-PT1000. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, basically a kind of thermistor. In this sensor, the resistor is actually a small strip of Platinum with a resistance of 100 ohms at 0 ºC, thus the name PT100. Compared to most NTC/PTC thermistors, the PT type of RTD is much most stable and precise (but also more expensive) PT100’s have been used for many years to measure temperature in laboratory and industrial processes, and have [...]
- [2 x 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266](https://digilogelectronics.com/product/2-x-18650-lithium-battery-shield-v8-mobile-power-expansion-board-module-5v-3a-3v-1a-micro-usb-for-arduino-esp32-esp8266/): This is a 2 x 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266. This mobile power supply has a built-in lithium battery protection IC, which has overcurrent, overvoltage, Undervoltage protection, and the module is a portable mobile power supply that supports 3V/1A and 5V/3A two voltage outputs. Installation of the battery must be determined positive and negative, the board has been clearly marked positive and negative Or Installation errors will burn out the module. The battery voltage works normally from 3.2V to 4.2V. 5V voltage output rated current is 3A, maximum [...]
- [ATTINY85 USB Development Board](https://digilogelectronics.com/product/attiny85-usb-development-board/): The ATtiny85 based mini development board is similar to the Arduino, but cheaper and smaller (of course a bit less powerful). With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE, this ATTINY85 USB Development Board is a great way to jump into microcontroller electronics. ATtiny85 based microcontroller development board come with the USB interface. Coding is similar to Arduino, and it uses the familiar Arduino IDE for development. This is a digispark clone. It has 6 port with several functions. Depending on the programming (with Arduino IDE) can it have 6 digital I/O, 4 [...]
- [Mini MP1584 DC-DC 3A Adjustable Buck Module](https://digilogelectronics.com/product/mini-mp1584-dc-dc-3a-adjustable-buck-module-3/): The Mini MP1584 DC-DC 3A Adjustable Buck module is ultra small adjustable 0.8V to 20V output DC to DC step-down Buck converter that uses an MP1584EN high frequency switching regulator and integrated high voltage power MOSFET. It features a soft start, thermal shutdown, and under-voltage lockout (UVLO) to protect the module from operating at insufficient supply voltage. Small size, lightweight, low internal power consumption, and wide input voltage range of 4.5V to 28V make this module suitable for a variety of different applications where small size and lightweight voltage conversion is needed, including RC cars and airplanes, quadcopters, robotics, Arduino modules, and DIY devices. Applications DIY 8051 / [...]
- [XL6009 DC-DC Step-Up Converter Performance Ultra LM2577 Booster Circuit Board](https://digilogelectronics.com/product/xl6009-dc-dc-step-up-converter-performance-ultra-lm2577-booster-circuit-board/): This XL6009 DC-DC Step-Up Converter Performance Ultra LM2577 Booster Circuit Board is a non-isolated step-up (boost) voltage converter featuring adjustable output voltage and high efficiency. The module uses the second generation of high-frequency switching technology XL6009E1 core chip performance than the first generation technology LM2577. XL6009 boost module at a lower cost, superior performance. It equips 4A high-efficiency MOSFET switches, so as to provide a conversion efficiency of up to 94%. High switching frequency 400KHz, you can use a small -capacity filter capacitors that can achieve very good results, the ripple is smaller and smaller Pins IN+ input positive IN- input negative! OUT+ output [...]
- [CH341A 24 25 Series EEPROM Flash BIOS USB Programmer with Software & Driver](https://digilogelectronics.com/product/ch341a-24-25-series-eeprom-flash-bios-usb-programmer-with-software-driver/): This low-cost CH341A 24 25 Series EEPROM Flash BIOS USB Programmer with Software & Driver is intended to support 24 EEPROM and 25 SPI flash 8pin/16 pin chip. It is equipped with CH 341A chip, can automatically recognize 25 series chip, and its 24/25 series indicator lamp enables the user to easily recognize module’s working status. This awesome programmer is also user-friendly because it supports USB to TTL conversion and the SOP8 SOP16 to DIP8 converter board makes the connection with different chips easily. CH341 is a USB bus convert chip, providing UART, printer port, parallel and synchronous serial with 2-wire [...]
- [DRV8833 2 Channel DC Motor Driver](https://digilogelectronics.com/product/drv8833-2-channel-dc-motor-driver/): DRV8833 is a dual H-bridge motor driver IC that can be used for bidirectional control of two brushed DC motors at 2.7 V to 10.8 V. It can supply up to about 1.2 A per channel continuously and can tolerate peak currents up to 2 A per channel for a few seconds, making it an ideal driver for small motors that run on relatively low voltages. The board ships populated with SMD components, including the DRV8833, and adds an FET for reverse battery protection. The DRV8833 has a higher peak current rating (2 A per channel vs 1.5 A), optional built-in [...]
- [28BYJ-48 12V 4-Phase Stepper Step Motor 28BYJ-48](https://digilogelectronics.com/product/28byj-48-12v-4-phase-stepper-step-motor-28byj-48/): The 28BYJ-48 12V 4-Phase Stepper Motor is a small electric motor designed for precise control of motion. It operates using a 4-phase stepping sequence that allows for accurate positioning and smooth movement. With its compact size and low power consumption, this motor is ideal for use in a wide range of applications, including robotics, automation, and precision instrumentation. At the heart of the 28BYJ-48 4-Phase Stepper Motor is a series of electromagnets that are arranged in a precise pattern. By applying electrical signals to these magnets in a specific sequence, the motor rotates in small, incremental steps. The motor’s step angle [...]
- [High Current Active Alarm Buzzer Driver Module](https://digilogelectronics.com/product/high-current-active-alarm-buzzer-driver-module/): A High Current Active Alarm Buzzer Driver Module is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric. Just like what you are viewing now, it is 5V DC Electronic Part Active Buzzer Module. Using top quality material, it is durable in use. What’s more? This active buzzer rings out as long as it is electrified. Compared with a passive buzzer, it is a bit expensive but easier to control. Typical uses of buzzers include alarm devices, timers, and confirmation of user input such as a mouse click or keystroke. A good choice for you all! Features An active [...]
- [XY-LPWM Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display Module](https://digilogelectronics.com/product/xy-lpwm-signal-generator-pwm-pulse-frequency-duty-cycle-adjustable-module-lcd-display-module/): XY-LPWM Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display Module is a two-channel PWM signal generator. It has dedicated switches for adjusting the frequency and duty cycle separately. Using this module PWM output, frequency and duty cycle can be set as per requirements. Communication Standard 9600 bps Data bits: 8 Stop bit: 1 Check digit: none Flow control: none Set the frequency of the PWM “F101”: Set the frequency to 101 Hz (001 to 999) “F1.05”: set the frequency of 1.05 kHz (1.00 ~ 9.99) “F10.5”: Set the frequency to 10.5kHz (10.0 ~ 99.9) “F1.0.5”: set the frequency [...]
- [PIR Motion Sensor Detector Module HC-SR501](https://digilogelectronics.com/product/pir-motion-sensor-detector-module-hc-sr501/): If you want to build a device that is used to detect sense motion and almost always used to detect whether a human has moved in or out of the sensors range. Then this Sensor is needed for you. you can buy this sensor from rns.bot at a reasonable price The PIR Motion Sensor Detector Module HC SR501 allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor’s range. It is often referred to using “PIR”, “Pyroelectric”, “Passive Infrared” and “IR Motion” sensors. The module has an onboard pyroelectric sensor, conditioning circuitry, [...]
- [Leonardo R3 Board Micro-USB compatible with Arduino](https://digilogelectronics.com/product/leonardo-r3-board-micro-usb-compatible-with-arduino/): The Leonardo R3 Board Micro-USB compatible with Arduino is a micro-controller board base on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs);  a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything need to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Leonardo R3 Board differs from all preceding boards in that the ATmega32u4 has built-in USB communication; eliminating the [...]
- [USB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino](https://digilogelectronics.com/product/usb-to-uart-ttl-5v-3-3v-ft232rl-download-cable-to-serial-adapter-module-for-arduino/): The USB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module is a basic breakout board for the FTDI FT232RL USB to serial IC, Revision 2. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows [...]
- [NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator](https://digilogelectronics.com/product/ne555-pulse-frequency-duty-cycle-adjustable-module-square-wave-signal-generator/): NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator is 5 V square wave signal generator. It generates a square wave signal used for experimental development. Also, use to drive a stepper motor for generating a square wave drive signal. The output duty cycle can fine-tune. Duty cycle and frequency is not separately adjustable, adjusting the duty cycle will change the frequency. The output frequency is adjustable: Period T = 0.7 (RA +2 RB) C RA, RB is 0-10K adjustable; Low profile when C = 0.001UF; IF stalls C = 0.1UF; High-frequency file C = 1UF; HF stalls C [...]
- [LM2596S DC-DC Buck Converter Power Supply](https://digilogelectronics.com/product/lm2596s-dc-dc-buck-converter-power-supply/): DC-DC Buck Converter Step Down Module LM2596 Power Supply is a step-down(buck) switching regulator, capable of driving a 3-A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5 V, 12 V, and an adjustable output version. The LM2596 series operates at a switching frequency of 150kHz, thus allowing smaller sized filter components than what would be required with lower frequency switching regulators. This is an LM2596 DC-DC buck converter step-down power module with the high-precision potentiometer, capable of driving a load up to 3A with high efficiency, which can work with Freeduino UNO, other mainboards, and basic [...]
- [0.96 Inch I2C/IIC 4pin OLED Display Module BLUE](https://digilogelectronics.com/product/0-96-inch-i2c-iic-4pin-oled-display-module-blue/): OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel display This 0.96 Inch I2C/IIC 4pin OLED Display Module BLUE can be interfaced with any microcontroller using SPI/IIC/I2C protocols. It is having a resolution of 128×64. The package includes display board, display, 4 pin male header pre-soldered to board. OLED monochrome 128×64 dot matrix display module. The characteristics [...]
- [Mini MP1584 DC-DC 3A Adjustable Buck Module](https://digilogelectronics.com/product/mini-mp1584-dc-dc-3a-adjustable-buck-module-2/): The Mini MP1584 DC-DC 3A Adjustable Buck module is ultra small adjustable 0.8V to 20V output DC to DC step-down Buck converter that uses an MP1584EN high frequency switching regulator and integrated high voltage power MOSFET. It features a soft start, thermal shutdown, and under-voltage lockout (UVLO) to protect the module from operating at insufficient supply voltage. Small size, lightweight, low internal power consumption, and wide input voltage range of 4.5V to 28V make this module suitable for a variety of different applications where small size and lightweight voltage conversion is needed, including RC cars and airplanes, quadcopters, robotics, Arduino modules, and DIY devices. Applications: DIY 8051 / [...]
- [DC7V-12V Brushless Motor Driver Controller Board For Hard Drive Motor 3/4 Wire](https://digilogelectronics.com/product/dc7v-12v-brushless-motor-driver-controller-board-for-hard-drive-motor-3-4-wire/): This is a DC7V-12V Brushless Motor Driver Controller Board For Hard Drive Motor 3/4 Wire. The driver board has voltage reverse connection protection, over-current protection, short circuit protection, simple wiring, and worry-free use. The hard disk motor can be rotated at a voltage of 7-12V. The higher the voltage, the faster the speed, which can reach about 10,000 revolutions. How to identify the common port of a 4-wire motor Measure the four terminals with the resistance x 1 of the meter. One of the terminals and the other three terminals have the smallest and equal resistance, then this terminal is the [...]
- [TP5100 4.2v and 8.4v Dual One/Two Battery Protection Board](https://digilogelectronics.com/product/tp5100-4-2v-and-8-4v-dual-one-two-battery-protection-board/): TP5100 4.2v and 8.4v Dual One/Two Battery Protection Board is a double switch buck 8.4V, single cell 4. 2V lithium battery charge management chip. Its ultra-compact QFN16 package and simple external circuit, making TP5100 ideal for portable equipment so large current charging management applications. Meanwhile, TP5100 built-in input overcurrent, under-voltage protection, over-temperature protection, short circuit protection, battery temperature monitoring, reverse battery protection. TP5100 has 5V-15V wide input voltage, dual battery trickle charge into pre-charge, constant current, constant voltage three-phases, pre-charge current trickle charge current through an external resistor adjustment, the maximum charge current up to 2A. TP5100 with a frequency of [...]
- [Serial Port Mini RS232 to TTL Converter Adaptor Module Board MAX3232-2pcs.](https://digilogelectronics.com/product/serial-port-mini-rs232-to-ttl-converter-adaptor-module-board-max3232-2pcs/): Serial Port Mini RS232 to TTL Converter Adaptor Module Board MAX3232 for electrical level converter. The RS232 to TTL 5V Signal Converter Module is a professional module for projects requiring PC/Laptop RS232 interface to 5V TTL logic. This module converts signals between RS232 voltage levels and TTL voltage levels. It is bi-directional, where TTL signals are converted to RS232 levels and RS232 levels are converted to TTL levels. It is ideal for use in pc interfacing, microcontroller based projects, robotics, or for experimental and educational purposes. Pin-outs  – (0V) +(VCC 3.0~5.5V) TTL-TXD TTL-RXD -(0V) +(VCC 3.0~5.5V) RS232-RX RS232-TX Circuit Connection : Features [...]
- [TDA2030A 6-12V 18W Audio Amplifier Module](https://digilogelectronics.com/product/tda2030a-6-12v-18w-audio-amplifier-module/): Want to increase the audio output capability of your project? Well, then this is the perfect module for you. This module is based on the famous TDA2030A Audio Amplifier Module which is capable of 18-watt power output with very low harmonic distortion. This TDA2030A audio amplifier circuit, often using V-5-pin single in-line plastic package structure. Features Onboard TDA2030A Audio amplifier IC Mono channel 18W Power amplifier circuit design Onboard horn socket 10 k adjustable resistance to adjust the volume of the amplification Onboard power indicator light Chip has lead to the main pin, can directly input the audio signal  
- [USB Logic Analyze 24M 8CH, MCU ARM FPGA DSP Debug Tool](https://digilogelectronics.com/product/usb-logic-analyze-24m-8ch-mcu-arm-fpga-dsp-debug-tool/): USB Logic Analyze 24M 8CH, MCU ARM FPGA DSP debug tool is a very cheapest and most useful debugging tool for digital signal analysis, help you fully analyze the UART, IIC, SPI, CAN all of these interfaces. If you don’t want to start with an expensive oscilloscope, this will be another good choice. With a total of eight digital channels, the voltage range is 0V ~ 5.5V, the voltage threshold is considered to be low below 1.5V, and 1.5V above is considered high. 24 m sampling rate, can automatically analyze UART, IIC, SPI, and many other standard protocols. If you do [...]
- [Digispark ATTINY85 Mini USB Development Board](https://digilogelectronics.com/product/digispark-attiny85-mini-usb-development-board/): Although small in size, great in capabilities. The Digispark ATTINY85 Mini USB Development Board is similar to the Arduino but cheaper and smaller (of course a bit less powerful). With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE, this board is a great way to jump into microcontroller electronics. Complete USB Development Board Cheap Enough to Leave in a Project. If you have never heard of the Digispark ATtiny board before, it may take you more than a moment to understand its full power and potential. So read this carefully: Firstly, it’s a 20MHz, AVR 8-bit microcontroller [...]
- [Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module](https://digilogelectronics.com/product/double-bts7960-43a-h-bridge-high-power-stepper-motor-driver-module/): The Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module is; a fully integrated high current H bridge for motor drive applications using the BTS7960 high current half bridge. the BTS7960 is part of the NovalithICTM family. This containing one p-channel high side MOSFET and one n-channel low side MOSFET; with an integrated driver IC in one package. Due to the p-channel high side switch; the need for a charge pump is eliminated thus minimizing EMI. Interfacing to a microcontroller is made easy by the integrated driver IC which features logic level inputs; diagnosis with current sense, slew rate adjustment; dead [...]
- [4 Channel Infrared Tracking Module](https://digilogelectronics.com/product/4-channel-infrared-tracing-module/): Features Detection range: 1mm to 60 CM adjustable, the closer the performance more stable, white reflects the farthest distance. Size: in the control panel:42 x 38 x 12mm (length x width x height). Small forward: 25 x 12 x 12mm (length x width x height). Output interface: 6 wire interface (1234 to 4 signal output ends, + positive power, – for the negative power is ground) The output signal: TTL level (can be directly connected to I/0 microcontroller, infrared light reflected back to the sensor induction, the red indicator light, output low level; no infrared light, the indicator light does not [...]
- [GY-30 BH1750FVI Digital Light Intensity Illumination Sensor](https://digilogelectronics.com/product/gy-30-bh1750fvi-digital-light-intensity-illumination-sensor/): This is a GY-30 BH1750FVI Digital Light Intensity Illumination Sensor. BH1750FVI is a digital Ambient Light Sensor IC for the I2C bus interface. This IC is the most suitable to receive the ambient light data for adjusting LCD and Keypad backlight power of the Mobile phone. It is possible to detect wide range at High resolution. Features No ambient light distinction High precision determination accurate to 1 Lu for different lights ROHM original package BH1750FVI chip  
- [Flame Sensor infrared Receiver Ignition source detection module](https://digilogelectronics.com/product/flame-sensor-infrared-receiver-ignition-source-detection-module/): This tiny Flame sensor infrared receiver module ignition source detection module is Arduino compatible can use to detect flame or wavelength of the light source within 760nm~1100nm also useful for Lighter flame detect at the distance 80cm.  Greater the flame, farther the test distance. It has the Detect angle of  60° and very sensitive to flame spectrum. It produces the one channel output signal at the D0 terminal for further processing like an alarm system or any switching system. The sensitivity is adjustable with the help of blue potentiometer given on the board. Features  Indicator light: a green one for the switch, a red one for power. Built in a potentiometer for sensitivity control. [...]
- [LCD1602 Parallel LCD Display Yellow Backlight](https://digilogelectronics.com/product/lcd1602-parallel-lcd-display-yellow-backlight/): If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only a little to display, the LCD1602 Parallel LCD Display is a quite good solution. This is LCD1602 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 Black on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display that has a very clear and high contrast black text upon a yellow background/backlight. This is the great yellow backlight LCD display. It is fantastic for Arduino-based projects. This LCD1602 Parallel LCD Display with [...]
- [TTL FTDI Transmitter USB For 3.3V/5V Dual power FT232RL MWC Programmer](https://digilogelectronics.com/product/ttl-ftdi-transmitter-usb-for-3-3v-5v-dual-power-ft232rl-mwc-programmer-2/): By using the TTL FTDI Transmitter USB For 3.3V 5V dual power FT232RLFTDI MWC Programmer, you can easily install your project or product into a USB interface. The cs2102 is an SI labs product that can communicate (for example, the Arduino multiview 2.5 is the same as the GPS in the APM pack and any other. A device that has a TTL port provides the computer with a USB port. By connecting this converter to the computer and installing the driver program, which adds a virtual serial port to the computer ports, which is capable of working with Windows operating systems, MAC, Linux. On the output of [...]
- [Mini MP1584 DC-DC 3A Adjustable Buck Module](https://digilogelectronics.com/product/mini-mp1584-dc-dc-3a-adjustable-buck-module/): The Mini MP1584 DC-DC 3A Adjustable Buck module is ultra small adjustable 0.8V to 20V output DC to DC step-down Buck converter that uses an MP1584EN high frequency switching regulator and integrated high voltage power MOSFET. It features a soft start, thermal shutdown, and under-voltage lockout (UVLO) to protect the module from operating at insufficient supply voltage. Small size, lightweight, low internal power consumption, and wide input voltage range of 4.5V to 28V make this module suitable for a variety of different applications where small size and lightweight voltage conversion is needed, including RC cars and airplanes, quadcopters, robotics, Arduino modules, and DIY devices. Applications DIY 8051 / [...]
- [RCWL-0516 Microwave Radar Sensor](https://digilogelectronics.com/product/rcwl-0516-microwave-radar-sensor/): The RCWL-0516 Microwave Radar Sensor module has been designed as an alternative to the common PIR motion sensors widely used in burglar alarms and security lights. Like the PIR sensor, this sensor also detects only movements within its detection range. But instead of sniffing the blackbody radiation from a moving person, this sensor uses a “microwave Doppler radar” technique to detect moving objects. It has a sensitivity range of ~1 meters. When triggered, its TTL-level output (OUT) pin will switch from LOW (0 V) to HIGH (3.3 V) for a finite time (2 to 3 s) before returning to its idle (LOW) state. [...]
- [Waveshare MQ-2 Gas Sensor](https://digilogelectronics.com/product/waveshare-mq-2-gas-sensor/): This is Waveshare MQ-2 Gas Sensor. The sensor detects the concentration of LPG, propane and hydrogen in the air, the result can be obtained by measuring the voltage on the analog output. The system is powered with a voltage from 2.5 V to 5 V. It has a digital and analog output, making it compatible with most of the commissioning modules, including Raspberry Pi and Arduino. Operating principle: MQ-2 gas sensor applies SnO2 which has a lower conductivity in the clear air as a gas-sensing material. In an atmosphere where there may be inflammable gases, the conductivity of the gas sensor [...]
- [Thermal Sensor Relay Module](https://digilogelectronics.com/product/thermal-sensor-relay-module/): This is a Thermal Sensor Relay Module. It uses a temperature detection via potentiometer adjustment to a valve to control the corresponding temperature with relay output, directly connected to the AC high-power products.  
- [Vibration sensor module alarm Motion sensor module vibration switch SW-420](https://digilogelectronics.com/product/vibration-sensor-module-alarm-motion-sensor-module-vibration-switch-sw-420/): Vibration sensor module alarm Motion sensor module vibration switch SW-420 module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can adjust using an onboard potentiometer. When this no vibration, this module output logic LOW the signal indicates LED light, and vice versa. If the module does not vibrate, the vibration switch was on the close state, the output of low output, the green indicator light. The product vibrates, vibration switches momentary disconnect, the output is driven high, the green light does not shine. The output can connect to [...]
- [Winsen MQ-2- Smoke Sensor](https://digilogelectronics.com/product/winsen-mq-2-smoke-sensor/): Winsen MQ-2 Smoke Sensor is an original and brand new smoke and propane gas sensor. With a long lifespan and low price, for domestic gas leakage and flammable gas alarm use. The sensitive material of the MQ-2 gas sensor is SnO2, which with lower conductivity in clean air. When the target flammable gas exists, the sensor’s conductivity gets higher along with the gas concentration rising. Users can convert the change of conductivity to correspond output signal of gas concentration through a simple circuit. MQ-2 gas sensor has a high sensitivity to propane and smoke, also can detect natural gas and other [...]
- [SMD 3 Color LED Module](https://digilogelectronics.com/product/smd-3-color-led-module/): SMD RGB LED module consists of a full-color LED made by R, G, B three-pin PWM voltage input can be adjusted. Primary colors (red/blue/green) strength in order to achieve a full-color mixing effect. Control of the module with the Arduino can be achieved Cool lighting effects. The RGB Full Color LED SMD Module consists of a 5050 SMD LED, use with limiting resistors to prevent burnout. Compatible with popular electronics platforms like Arduino, Raspberry Pi, and ESP8266.   Features: RGB trichromatic limiting resistor to prevent burnout PWM adjusted color mixing Working voltage: 5V LED drive mode: Common cathode driver  
- [Arduino UNO R4 Minima ABX00080S](https://digilogelectronics.com/product/arduino-uno-r4-minima-abx00080s/): Introducing the Arduino UNO R4 Minima, a groundbreaking addition to the UNO board family. This new launch boasts impressive features, starting with its 32-bit microcontroller. Powered by the RA4M1 series microcontroller from Renesas (R7FA4M1AB3CFM#AA0), which houses a 48 MHz Arm Cortex-M4 microprocessor. Pin Configuration: The UNO R4 Minima offers expanded memory capabilities, including 256 kB flash, 32 kB SRAM, and 8 kB data memory (EEPROM). Operating at 5 V, this board ensures compatibility with UNO form factor accessories designed for the same voltage. While previous UNO shields can be used, software compatibility may vary due to the microcontroller change. Experience the [...]
- [WT32-ETH01 V1.2 Serial to Ethernet Module Gateway Module with WiFi +Bluetooth](https://digilogelectronics.com/product/wt32-eth01-v1-2-serial-to-ethernet-module-gateway-module-with-wifi-bluetooth/): WT32-ETH01 V1.2 Serial to Ethernet Module Gateway Module with WiFi +Bluetooth is an embedded serial port to Ethernet module designed by Wireless-tag company based on ESP32 chipset, The module integrates the optimized TCP/IP protocol stack, which is convenient for users to complete the networking function of embedded devices, and greatly reduces the cost of development time. In addition, the module is compatible with the semi-welding disk and connector through-hole design, the plate width is a general width, the module can be welded directly on the board, providing trust to your potential users. Features Easy to use Easy to interface Good quality [...]
- [USB Type C Breakout Board – Downstream Connection](https://digilogelectronics.com/product/usb-type-c-breakout-board-downstream-connection/): USB Type C Breakout Board lets you integrate Type C connectivity into your projects. USB C features a symmetric/reversible connector, more data pins and higher current output capability. But, for most developers, the pin usage you know and love from older USB will work just fine. This breakout gives you all the basics you need and a resistor configuration that mimics classic USB 2.0 for a downstream connection. Why did we make this? USB C is the next generation of USB connectors and you will start to see them on all sorts of devices pretty soon as the industry is moving [...]
- [USB to Micro USB Cable wire 1M for NodeMCU](https://digilogelectronics.com/product/usb-to-micro-usb-cable-wire-1m-for-nodemcu/): One meter long USB cable. It has the regular sized A plug on one end and a micro plug on the other. Ideal for new Arduino Uno boards, charging almost every new mobile phone except those from Apple, and more. Has the full five-wire configuration in a neat flat cable style. Either for data transmission or phone charging, this 1M Noodle Flat Wire Data Line V8 Micro USB to USB Charging Cable for Android Phone will bring you much convenience and help in daily life. Adopting high-quality material and with fine workmanship, this data cable is durable in use. For professional [...]
- [](https://digilogelectronics.com/product/)
- [ATMEGA16 ATmega 32 ISP AVR Minimum Development System Board Module](https://digilogelectronics.com/product/atmega16-atmega-32-isp-avr-minimum-development-system-board-module/): This is ATMEGA16 ATmega 32 ISP AVR Minimum Development System Board Module. To get a personal Development Board will help to stimulate your intelligence and inspiration. A bare board may sometimes be more helpful than an assembled one for a learner. Come here and have a look at our AVR Minimum System Development Board ISP Atmega16 Atmega32. Adopting top quality material and with advanced technique, this board is authentically reliable. No soldering and no assembling; you can DIY whatever circuit you prefer. It is really a good assistant during your development. Note: This minimum system development board without AVR chip, you need purchase for [...]
- [Male to Male Jumper Wires 40Pcs 20cm](https://digilogelectronics.com/product/male-to-male-jumper-wires-40pcs-20cm/): This is 20CM Dupont Wire Color Jumper Cable, 2.54mm 1P-1P Male to Male 40PCS. A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has 1Pin male to the 1pin male header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting [...]
- [USB type A to Micro USB Cable ~1meter](https://digilogelectronics.com/product/usb-type-a-to-micro-usb-cable-1meter/): It is a USB type A to Micro USB Cable ~1meter.USB cable assemblies are some of the most popular cable types available, used mostly to connect smartphones, computers to peripheral devices such as cameras, camcorders, printers, scanners, and more.  
- [50 CM Micro USB Cable](https://digilogelectronics.com/product/50-cm-micro-usb-cable/): This is Multipurpose MicroUSB Cable mainly used for Arduino boards and Flight Controller Boards as well as can be used as mobile data transfer cable. With its best quality connectors and built, it can provide a good lifecycle.
- [2.8 inch SPI Touch Screen Module TFT Interface 240*320](https://digilogelectronics.com/product/2-8-inch-spi-touch-screen-module-tft-interface-240320/): This TFT display is big (2.8″ diagonal) bright and colorful! 240×320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128×64 display. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen. This display has a controller built into it with RAM buffering so that almost no work is done by the microcontroller. The display can be used in two modes: 8-bit and SPI. For 8-bit mode, you’ll need 8 digital data lines and 4 or 5 digital control lines to read and write to the display (12 [...]
- [WIZnet W5100S-EVB-Pico](https://digilogelectronics.com/product/wiznet-w5100s-evb-pico/): W5100S-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and entirely hardwired TCP/IP controller W5100S – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5100S. WIZnet W5100S-EVB-Pico Evaluation Board is a compact development platform based on the Raspberry Pi RP2040 Microcontroller. The 133MHz RP2040 MCU has a dual Arm® Cortex®-M0+ core delivering high performance, with various low-power modes to support extended-duration operation on battery power. The RP2040 also features a large on-chip memory, symmetric dual-core processor complex, deterministic bus fabric, and a rich peripheral set augmented with the RPi Programmable I/O [...]
- [Waveshare USB HUB HAT (B) for Raspberry Pi Series with 4x USB 2.0 Ports](https://digilogelectronics.com/product/waveshare-usb-hub-hat-b-for-raspberry-pi-series-with-4x-usb-2-0-ports/): This is a Waveshare USB HUB HAT (B) for Raspberry Pi Series with 4x USB 2.0 Ports. It is a 4 port USB hub for Raspberry Pi, provides more USB capability to your Pi, what’s more, it features a USB to UART converter for easy serial communication. The Module can work with various versions of the Pi, and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH. Features 4 USB Ports, compatible with USB2.0/1.1 Onboard USB to UART, with enable or disable switch, convenient for Raspberry Pi serial debugging and avoiding conflict [...]
- [PIC ICD2 PICKit2 PICKIT3 Universal Programming Adapter Programmer Board](https://digilogelectronics.com/product/pic-icd2-pickit2-pickit3-universal-programming-adapter-programmer-board/): The PIC ICD2 PICKit2 PICKIT3 Universal Programming Adapter Programmer Board is designed to work in conjunction with the popular PICkit 2 or PICkit3 programmer. Installing the microcontroller, 28-pin, 40-pin microcontroller left aligned 28 / 40P (A). This flag line short-circuits cap on the A position. The 8.14,18,20-pin microcontroller aligned on the left 8P / 14P / 18P / 20P flag line (B), shorting cap on the B position. The ICD2, KIT2, KIT3 crystal head or 6Pin Block programming connection for programming the programming operation. (Note: a separate program of the seat) The seat supports the following programming microcontroller PIC16/18XX 40PIN Series devices (except 16F59) PIC16/18XX 28PIN [...]
- [1.8 Inch TFT LCD Module 128 x 160 with 4 IO](https://digilogelectronics.com/product/1-8-inch-tft-lcd-module-128-x-160-with-4-io/): This lovely little display breakout is the best way to add a small, colourful and bright display to any project. Since the 1.8 Inch TFT LCD Module display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available! The 1.8″ display has 128×160 colour pixels. Unlike the low cost “Nokia 6110” and similar LCD displays, which are CSTN type and thus have poor colour and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 18-bit colour [...]
- [ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32](https://digilogelectronics.com/product/st-link-v2-in-circuit-debugger-programmer-for-stm8-and-stm32/): This is ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32. ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. STM8 applications use the USB full speed interface to communicate with ST Visual Develop (STVD) or ST Visual Program (STVP) software. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments. In addition, to provide the same functionalities as the ST-LINK/V2, the ST-LINK/V2-ISOL [...]
- [Unsoldered ATTINY88 Development Board 16Mhz Compatible NANO V3.0 Improvement Board](https://digilogelectronics.com/product/unsoldered-attiny88-development-board-16mhz-compatible-nano-v3-0-improvement-board/): The ATtiny88 Nano V3.0 is a compatible and cheaper version of the Arduino Nano V3.0. This variant is based on the ATtiny88 Microcontroller chip. This board contains a Micro USB connection with which the ATtiny can be programmed and powered. Usually, Nano boards use a CH340 chip for converting USB to Serial, for example, but the ATtiny88 microcontroller has this built in. Features ATTINY88 Development Board 16MHz operation Compatible with NANO V3.0 Improvement board for enhanced functionality Unsoldered components  
- [LuckFox Pico RV1103 Linux Micro Development Board, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors](https://digilogelectronics.com/product/luckfox-pico-rv1103-linux-micro-development-board-integrates-arm-cortex-a7-risc-v-mcu-npu-isp-processors/): The LuckFox Pico RV1103 is a compact Linux micro development board featuring a powerful combination of processors, including ARM Cortex-A7, RISC-V MCU, NPU (Neural Processing Unit), and ISP (Image Signal Processor). This versatile board offers a wide range of capabilities, making it suitable for various applications. Its integration of advanced processors enables efficient computation, machine learning, and image processing, making it an excellent choice for diverse development projects. Useful Link: https://wiki.luckfox.com/Luckfox-Pico/Luckfox-Pico-quick-start/ Features Compact Linux dev board. ARM Cortex-A7 & RISC-V MCU. NPU for AI tasks. ISP for image processing. Versatile for various applications.  
- [Unwelded SIM800C GSM GPRS Module 5V/3.3V TTL Development Board IPEX with Bluetooth for STM32 C51](https://digilogelectronics.com/product/unwelded-sim800c-gsm-gprs-module-5v-3-3v-ttl-development-board-ipex-with-bluetooth-for-stm32-c51/): The Unwelded SIM800C GSM GPRS Module Development Board is a versatile communication solution for STM32 and C51 microcontroller projects. Offering compatibility with both 5V and 3.3V TTL levels, it facilitates seamless integration. The IPEX interface ensures antenna connectivity, and it features Bluetooth functionality for additional wireless capabilities. The SIM800C GSM GPRS module, supports reliable mobile communication, making it an ideal choice for applications requiring GSM connectivity, such as remote monitoring and IoT projects. The board’s flexibility and unwelded design cater to customization based on specific project requirements. Pin Description 5V: power supply pin, the only input DC5V, used to power the [...]
- [STM32F407VET6 Arm Cortex-M4 core with DSP and FPU](https://digilogelectronics.com/product/stm32f407vet6-arm-cortex-m4-core-with-dsp-and-fpu/): The STM32F405xx and STM32F407xx family is based on the high-performance Arm Cortex-M4 32-bit RISC core operating at a frequency of up to 168 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all Arm single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.®® The STM32F405xx and STM32F407xx family incorporates high-speed embedded memories (Flash memory up to 1 Mbyte, up to 192 Kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected [...]
- [STM32F103CBT6 Maple Mini](https://digilogelectronics.com/product/stm32f103cbt6-maple-mini/): This is STM32F103CBT6 Minimum System STM32 ARM Core Board. This board is a low-cost Minimum System Development Board for ARM Microcontroller STM32F103CBT6. Board is suitable for learners that want to learn the STM32 microcontroller with ARM Cortex-M3 32-bit core. Features  100% Brand new and high-quality STM32 Board 72MHz work frequency. 128KB flash memory, 20KB SRAM. 34 digital I/ pins (GPIOs) 12 PWM pins at 16-bit resolution 9 analog input (ADC) pins at 12-bit resolution 2 SPI peripherals 2 I2C peripherals  
- [STM32F411CEU6 Minimum System Board Microcomputer STM32 ARM Core Board](https://digilogelectronics.com/product/stm32f411ceu6-minimum-system-board-microcomputer-stm32-arm-core-board/): This is STM32F411CEU6 Minimum System STM32 ARM Core Board. This board is a low-cost Minimum System Development Board for ARM Microcontroller STM32F103C8T6. Board is suitable for learners that want to learn the STM32 microcontroller with ARM Cortex-M4 32-bit core. Pinout Diagram: Features  100% Brand new and high-quality STM32 Board 72MHz work frequency. 512K flash memory, 128K SRAM. Reset(POR/PDR). 4-26MHz crystal. Onboard USB Type C interface, you can give the board power supply and USB communication.  
- [HFS-DC06 5.8G DC5V Microwave Motion Sensor Module for LED Lighting Doppler Effect](https://digilogelectronics.com/product/hfs-dc06-5-8g-dc5v-microwave-motion-sensor-module-for-led-lighting-doppler-effect/): This is HFS-DC06 5.8G DC5V Microwave Motion Sensor Module for LED Lighting Doppler Effect. These Radar sensors are used for detecting, locating, tracking, and recognizing objects of various kinds at considerable distances. It operates by transmitting electromagnetic energy toward objects, commonly referred to as targets, and observing the echoes returned from them. The module has a range of up 4 meters and only requires stable 5V to be powered. The user may vary the orientation of the module to get the best coverage. Applications Intruder alarms Occupancy Modules Object Detection Precautions  The supply current should be greater than 30mA to drive [...]
- [PAJ7620 Gesture Recognition Sensor](https://digilogelectronics.com/product/paj7620-gesture-recognition-sensor/): This is a PAJ7620 Gesture Recognition Sensor. PAJ7620U2 integrates gesture recognition function with general I2C interface into a single chip. It can recognize 9 gestures and the gesture information can simply access via the I2C bus. PAJ7620U2 also offers built-in proximity detection for the purpose of sensing object approaching or departing. The PAJ7620U2 is designed with great flexibility in a power-saving mechanism. The PAJ7620U2 is designed to operate from 2.8V to 3.3V over -40°C to +85°C and the pull-up voltage for the I2C bus and interrupt line is from 1.8V to 3.3V. Gesture recognition function Move up Move down Move left Move [...]
- [YZC-133 Weighing Load Cell Sensor 20kg For Electronic Weighing Scale](https://digilogelectronics.com/product/yzc-133-weighing-load-cell-sensor-20kg-for-electronic-weighing-scale/): his YZC-133 Weighing Load Cell Sensor 20kg For Electronic Weighing Scale (sometimes called a strain gauge) can translate up to 20 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this YZC-133 Weighing Load Cell Sensor 20kg For Electronic Weighing Scale, you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by [...]
- [HB100 Microwave Doppler Radar Wireless Motion Sensor](https://digilogelectronics.com/product/hb100-microwave-doppler-radar-wireless-motion-sensor/): B100 Miniature Microwave Motion Sensor is an X-Band Bi-Static Doppler transceiver module. It has a built-in Dielectric Resonator Oscillator (DRO) and a pair of Microstrip patch antenna array, making it ideal for usage in motion detection equipment. This module is ideal for alarms, motion detectors, lighting control, vehicle speed measurement, and automatic doors. Doppler Principle Doppler theory based on time. when radio waves encounter an object in the moving process will be reflected when the waves. the frequency of the reflected wave will hit the object with the movement to change state. If the radio waves encounter an object position is fixed. then the [...]
- [MCU-758 ACS758LCB-050B- PFF-T Hall Current Sensor Module](https://digilogelectronics.com/product/mcu-758-acs758lcb-050b-pff-t-hall-current-sensor-module/): This MCU-758 ACS758LCB-050B- PFF-T Hall Current Sensor Module is based on the Allegro Hall-effect Based Linear Current Sensor IC ACS758LCB-050B. This is 50 Ampere Bi-directional current sensor Module. The relationship between voltage output and current input:  VOUT = VOUT(Q) + Vsens x I VOUT(Q) is the quiescent output voltage, which is VCC/2, which is the output voltage when there is no input. Vsens is a sensor-sensitive scale, also known as a coefficient. I is the current flowing from IP+ to IP-. For example, suppose the sensor model is 050B, VCC is 5V, and I current is 10A, then the output is [...]
- [Weighing Load Cell Sensor 5kg YZC-131 With Wires](https://digilogelectronics.com/product/weighing-load-cell-sensor-5kg-yzc-131-with-wires/): This straight bar load cell (sometimes called a strain gauge) can translate up to 5 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge, you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface. This straight bar load cell is made from [...]
- [A3144 Hall Effect Sensor Module](https://digilogelectronics.com/product/a3144-hall-effect-sensor-module/): The A3144 Hall Effect Sensor Magnet Detector Switch for Arduino is a switch that will turn on/off in the presence of a magnetic field. If no magnetic field is present, the signal line of the sensor is HIGH (3.5 V). If a magnetic field is presented to the sensor, the signal line goes LOW, at the same time the LED on the sensor lights up. An onboard LED will also indicate the presence of a magnetic field. Pin Connection Connect the Powerline (middle) to +5V and ground (-) to GND. Connect signal (s) to any digital pin on the Arduino. Features  Digital Output [...]
- [YZC-133 Weighing Load Cell Sensor 10kg For Electronic Weighing Scale](https://digilogelectronics.com/product/yzc-133-weighing-load-cell-sensor-10kg-for-electronic-weighing-scale/): This is a YZC-133 Weighing Load Cell Sensor 10kg For Electronic Weighing Scale. This straight bar load cell (sometimes called a strain gauge) can translate up to 10 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge, you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load [...]
- [GY-63 MS5611-01BA03 High Precision Pressure Sensor Height Sensor Module](https://digilogelectronics.com/product/gy-63-ms5611-01ba03-high-precision-pressure-sensor-height-sensor-module/): The GY-63 MS5611-01BA03 High Precision Pressure Sensor Height Sensor Module with SPI and I2C bus interface. This barometric pressure sensor is optimized for altimeters and variometers with an altitude resolution of 10 cm. The sensor module includes a high linearity pressure sensor and an ultra low power; 24 bit ΔΣ ADC with internal factory calibrated coefficients. It provides a precise digital 24 Bit pressure and temperature value and different operation modes; that allow the user to optimize for conversion speed and current consumption. A high resolution temperature output allows the implementation of an altimeter/thermometer function without any additional sensor. The MS5611-01BA [...]
- [Weighing Load Cell Sensor 1Kg for Electronic Kitchen Scale YZC-131 With Wires](https://digilogelectronics.com/product/weighing-load-cell-sensor-1kg-for-electronic-kitchen-scale-yzc-131-with-wires/): This is Weighing Load Cell Sensor 1Kg for Electronic Kitchen Scale YZC-131 With Wires. This weighing Load Cell Sensor (sometimes called a strain gauge) can translate up to 1 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge, you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring [...]
- [GY-BME280-3.3 Precision Altimeter Atmospheric Pressure Sensor Module](https://digilogelectronics.com/product/gy-bme280-3-3-precision-altimeter-atmospheric-pressure-sensor-module/): GY-BME280-3.3 BME280 Atmospheric Pressure Sensor Module is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity & Pressure Sensor. The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm. Default setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd & Vdd_IO. If you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1! Features Package 2.5 mm [...]
- [SCT 013 000 100A Non-Invasive AC Current Sensor Split Core Type Clamp Meter Sensor](https://digilogelectronics.com/product/sct-013-000-100a-non-invasive-ac-current-sensor-split-core-type-clamp-meter-sensor/): If you are wandering to detect current in the easiest way then you definitely have a current sensor. So, here is the solution for you. This Current sensor comes with good quality and you can purchase it at a reasonable price. This is SCT 013 000 100A Non-Invasive AC Current Sensor Split Core Type Clamp Meter Sensor. SCT-013-000 is a Non-Invasive AC current sensor i.e. it is a current transformer that can be used to measure AC current up to 100 amperes. Current transformers (CTs) are sensors are for measuring alternating current. They are particularly useful for measuring whole building electricity consumption [...]
- [20A Range Current Sensor Module ACS712](https://digilogelectronics.com/product/20a-range-current-sensor-module-acs712-2/): The 20A Range Current Sensor Module ACS712 consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field in which the Hall IC converts into a proportional voltage. Sensing and controlling current flow is a fundamental requirement in a wide variety of applications including, over-current protection circuits, battery chargers, switching mode power supplies, digital watt meters, programmable current sources, etc. This ACS721 current module is based on the ACS712 sensor, which can accurately detect AC or DC current. The maximum AC or DC that can be detected can [...]
- [SCT-013-030 Non-invasive AC Current Sensor Clamp Sensor 30A](https://digilogelectronics.com/product/sct-013-030-non-invasive-ac-current-sensor-clamp-sensor-30a/): This is SCT-013-030 Non-invasive AC Current Sensor Clamp Sensor 30A. SCT-013-000 is a Non-Invasive AC current sensor i.e. it is a current transformer that can be used to measure AC current up to 100 amperes. This Non-invasive AC Current Sensor clamped around the supply line can measure a load up to 30 Amps, and allow you to calculate how much current pass through it. It can be useful for building your own energy monitor or for building an over-current protection device for an AC load. This current clamp can be used to detect a current of up to 30A. Simply clip [...]
- [5A range Current Sensor Module ACS712](https://digilogelectronics.com/product/5a-range-current-sensor-module-acs712/): The 5A range Current Sensor Module ACS712 consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field in which the Hall IC converts into a proportional voltage. Sensing and controlling current flow is a fundamental requirement in a wide variety of applications including, over-current protection circuits, battery chargers, switching mode power supplies, digital watt meters, programmable current sources, etc. This ACS721 current module is based on the ACS712 sensor, which can accurately detect AC or DC current. The maximum AC or DC that can be detected can [...]
- [30A range Current Sensor Module ACS712](https://digilogelectronics.com/product/30a-range-current-sensor-module-acs712/): The 30A range Current Sensor Module ACS712 consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field in which the Hall IC converts into a proportional voltage. Sensing and controlling current flow is a fundamental requirement in a wide variety of applications including, over-current protection circuits, battery chargers, switching mode power supplies, digital watt meters, programmable current sources, etc. This ACS721 current module is based on the ACS712 sensor, which can accurately detect AC or DC current. The maximum AC or DC that can be detected can [...]
- [Unsoldered GY-471 3A Range MAX471 Current Sensor Module](https://digilogelectronics.com/product/unsoldered-gy-471-3a-range-max471-current-sensor-module/): The MAX471/MAX472 are complete, bidirectional, highside current-sense amplifiers for portable PCs, telephones, and other systems where battery/DC power-line monitoring is critical. High-side power-line monitoring is especially useful in battery-powered systems since it does not interfere with the ground paths of the battery chargers or monitors often found in “smart” batteries. The MAX471 has an internal 35mΩ current-sense resistor and measures battery currents up to ±3A. For applications requiring higher current or increased flexibility, the MAX472 functions with external sense and gain-setting resistors. Both devices have a current output that can be converted to a ground-referred voltage with a single resistor, allowing [...]
- [Blue 60V 10A Anti Reverse Diode Constant Current Power Module Solar Anti-Reverse Irrigation Module](https://digilogelectronics.com/product/blue-60v-10a-anti-reverse-diode-constant-current-power-module-solar-anti-reverse-irrigation-module/): This is Blue 60V 10A Anti-Reverse Diode Constant Current Power Module Solar Anti-Reverse Irrigation Module. This is an Anti-reverse diode. Solar charging, battery charging anti-backflow diode. Two SS56 Schottky diodes are used in parallel, with small internal resistance and low voltage. Note: The color of the PCB board might vary as per the availability. Features Anti-Reverse Diode: Prevents current flow in the wrong direction. Voltage/Current Rating: Handles up to 60V and 10A. Constant Current Module: Maintains a consistent current flow. Protection: Guards against reverse current and fluctuations. Incorporates a voltage regulator, ensuring consistent and stable output voltage for optimal performance in electronic [...]
- [HC-12 433 SI4463 Wireless Serial Module](https://digilogelectronics.com/product/hc-12-433-si4463-wireless-serial-module/): HC-12 wireless RF UART communication module is a new generation of multi-channel embedded wireless data transmission module. The Radio frequency of 433.4 – 473.0MHz, can be setting a communication channel, step is 400kHz, a total of 100 channels. The module maximum transmit power is 100mW (20dBm), and -116dBm receiver sensitivity air of the 5000bps baud rate, communication distance about 500 meters. The module adopts a stamped hole encapsulation method, which can be welded. The module size is 27.4mm*13.2mm *4mm (including antenna seat, not including the spring antenna), which is convenient for the customer to be embedded in the application system. The [...]
- [WCS1700 Hall Current Sensor with Over Current Protection](https://digilogelectronics.com/product/wcs1700-hall-current-sensor-with-over-current-protection/): The  WCS1700 current sensor provides economical and precise solutions for both DC and AC current sensing in industrial, commercial, and communications systems. The unique package provides easy implementation without breaking the original system and makes current sensing possible. Typical applications include motor control, load detection and management, over-current fault detection, and any intelligent power management system, etc. The WCS1700 consists of a precise, low-temperature drift linear hall sensor IC with a temperature compensation circuit and diameter of 9.0mm through-hole. Users can use the system’s own electric wire to bypass it through this hole to measure passing current. This design allows system designers to monitor any current path without breaking or changing the original system layout at [...]
- [USB to GSM Serial GPRS SIM800C Module with Bluetooth Computer Control Calling with Glue Stick Antenna](https://digilogelectronics.com/product/usb-to-gsm-serial-gprs-sim800c-module-with-bluetooth-computer-control-calling-with-glue-stick-antenna/): This is USB to GSM Serial GPRS SIM800C Module with Bluetooth Computer Control Calling with Glue Stick Antenna. GSM-SIM 800C USB to GSM is a quad-band GSM/GPRS module with stable performance, compact appearance and high-cost performance, which can meet the various needs of customers. Integrated USB to serial port chip, you can plug directly into the computer to debug. SIM800C operates at GSM/GPRS 850/900/1800/1900MHz which support being used worldwide. It can transmit voice, SMS information and data information with low power consumption, and can be applied to different design requirements of many compact products. Applications Voice communication SMS information transmission Data [...]
- [RF Transmitter Receiver Module 433MHz Wireless Link Kit For Arduino](https://digilogelectronics.com/product/rf-transmitter-receiver-module-433mhz-wireless-link-kit-for-arduino/): This is RF Transmitter Receiver Module 433 MHz Wireless Link Kit For Arduino. This wireless transmitter and receiver pair operates at 433 MHz. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireleReceiving frequency (MHz)ss data link. Since these are only transmitters, they will only work communicating data one-way, you would need two pairs (of different frequencies) to act as a transmitter/receiver pair. This Radio Transmitter & Receiver pair is perfectly matched to allow you to control items from a distance up to 500 feet wirelessly! Connect the transmitter to your Arduino, Raspberry Pi [...]
- [GSM GPRS SIM808 Module SMS Chip Development Board](https://digilogelectronics.com/product/gsm-gprs-sim808-module-sms-chip-development-board/): SIM808 module is a GSM and GPS two-in-one function module. It is based on the latest GSM/GPS module SIM808 from SIMCOM, supports GSM/GPRS Quad-Band network and combines GPS technology for satellite navigation.  It features ultra-low power consumption in sleep mode and integrated with charging circuit for Li-Ion batteries, that make it get a super long standby time and convenient for projects that use rechargeable Li-Ion battery. It has high GPS receive sensitivity with 22 tracking and 66 acquisition receiver channels. Besides, it also supports A-GPS that available for indoor localization.  The module is controlled by AT command via UART and supports [...]
- [SIM808 Module GSM GPRS GPS Development Board](https://digilogelectronics.com/product/sim808-module-gsm-gprs-gps-development-board/): This is SIM808 Module GSM GPRS GPS Development Board. The SIM808 module is a versatile integrated module that combines GSM, GPRS, and GPS functionalities into a single board. Here are its key characteristics: GSM: Provides basic cellular communication functionalities, allowing the module to make and receive calls, send and receive SMS messages, and connect to the internet using GPRS for data transmission. GPRS: Enables the module to access the internet and send/receive data packets. It’s commonly used for IoT (Internet of Things) applications where low-bandwidth data transfer is sufficient. GPS: Incorporates a GPS receiver, allowing the module to receive location information from satellites, providing [...]
- [15cm 3DBI GSM/GPRS/3G PCB Antenna with IPEX Connector](https://digilogelectronics.com/product/15cm-3dbi-gsm-gprs-3g-pcb-antenna-with-ipex-connector/): This is a 15cm 3DBI GSM/GPRS/3G PCB Antenna with IPEX13 Connector. This PCB/Sticker Antenna is a wireless device to receives and transmits signals, it has been widely used in telecommunication to communicate. One of the main reasons to use a PCB (printed circuit board) antenna is the reduced overall cost of the radio module. Application: 2G, 3G, 15dBi Applications  Features Compact 15cm length. 3dBi gain for signal strength. IPEX connector for easy PCB connection. Omnidirectional coverage. Suitable for IoT and mobile devices. RoHS compliant. Durable and reliable. Low-profile design.  
- [MT76813DBI ESP8266 Serial WIFI wireless Gain Antenna](https://digilogelectronics.com/product/mt76813dbi-esp8266-serial-wifi-wireless-gain-antenna/): This is ESP 8266 ESP8266 serial WIFI wireless transmitter module gain antenna MT76813DBI Module. The subject of the auction is a set of elements needed to perform the modification of the Raspberry Pi Zero W tile so that it is possible to connect an external WiFi antenna. With this modification, you will increase the WiFi range in your Raspberry Pi Zero W. Factory-new components, 100% functional. Features  Radome material: polyurethane Flexible cable Stable signal Best for indoor applications.  
- [DHT11 Temperature And Humidity Sensor Module with LED](https://digilogelectronics.com/product/dht11-temperature-and-humidity-sensor-module-with-led/): The DHT11 Temperature And Humidity Sensor Module with LED is a small humidity and temperature sensor that you can connect to your Arduino and get readings for temperature and humidity in the environment. Features DHT11 sensor with PCB and LED indicator along with cable; 3 to 5V power and I/O, 4 pins with 0.1″ spacing The board has pre-built 4.7K or 10K resistor, which you will need to use as a pull-up from the data pin to VCC. 2.5mA max current use during conversion (while requesting data) Good for 20-80% humidity readings with 5% accuracy Good for 0-50°C temperature readings ±2°C [...]
- [AHT10 High Precision Digital Temperature And Humidity Measurement Module](https://digilogelectronics.com/product/aht10-high-precision-digital-temperature-and-humidity-measurement-module/): The AHT10 High Precision Digital Temperature And Humidity Measurement Module is a new generation of temperature and humidity sensors, sets a new standard in size and intelligence: it is embedded in a dual-row flat leadless SMD package for reflow soldering with a 4 x 5mm bottom and a height of 1.6mm. The sensor outputs a calibrated digital signal in standard I 2C format. The AHT10 is equipped with a newly designed ASIC-specific chip, an improved MEMS semiconductor capacitive humidity sensing element and a standard on-chip temperature sensing element. Its performance has been greatly improved beyond the reliability level of previous generation [...]
- [DHT11 Digital Relative Humidity and Temperature Sensor Module](https://digilogelectronics.com/product/dht11-digital-relative-humidity-and-temperature-sensor-module/): This DHT11 Digital Relative Humidity and Temperature Sensor Module is pre-calibrated with resistive sense technology coupled with NTC thermistor, for the precise reading of the relative Humidity and surrounding temperature DHT 11 break-out board is a very popular, low-cost sensor from Aosong, the breakout provides easy installation of the DHT11 sensor module. The board is also equipped with high- performance 8-Bit microcontroller which is connected to the DHT11 sensor module. The output of the DHT11 is in the form of a digital signal on a single data pin. The sensing update frequency is to be measured at every 2sec (0.5Hz). The complete arrangement makes the device an [...]
- [Sharp Distance Measuring Sensor unit 10 to 80 cm – GP2Y0A21YK0F](https://digilogelectronics.com/product/sharp-distance-measuring-sensor-unit-10-to-80-cm-gp2y0a21yk0f/): This is a Sharp Distance Measuring Sensor unit 10 to 80 cm – GP2Y0A21YK0F. This SHARP distance sensor bounces IR off objects to determine how far away they are. It returns an analog voltage that can be used to determine how close the nearest object is. Comes with 12″ long 3-JST interface wire. These sensors are good for short-range detection. For over 1 m distance, we suggest using sonar sensors To use, connect the black wire to ground, red wire to 5V and white wire to the analog input. The analog voltage out will range from 3V when an object is only 4″ [...]
- [SHARP IR Distance Measuring Sensor Unit 4 ~ 30 cm With Cable-[GP2Y0A41SK0F]](https://digilogelectronics.com/product/sharp-ir-distance-measuring-sensor-unit-4-30-cm-with-cable-gp2y0a41sk0f/): Here we have the SHARP IR Distance Measuring Sensor Unit 4 ~ 30 cm With Cable-[GP2Y0A41SK0F]. This little unit uses a beam of infrared light to reflect off an object to measure its distance. Because it uses beam triangulation to calculate distance, it is able to provide consistent and reliable readings which are less sensitive to temperature variation or the object’s reflectivity. The sensor outputs an analog voltage corresponding to the distance of the object, easily read by an Arduino, PIC, Raspberry PI, or any other ADC chip. Please note: the wire colorings are not intuitive! Watch out before wiring! The datasheet has wiring details. Connect the [...]
- [3V-5V RFID YHY502CG Reader Writer Module UART Interface](https://digilogelectronics.com/product/3v-5v-rfid-yhy502cg-reader-writer-module-uart-interface/): This contactless 3V-5V RFID YHY502CG Reader Writer UART Interface module is designed for an easy reader adaptation to a host to use this device for test and application purpose. There is need only one command to finish one action, such as read or write card data. It needs no request or selection. The module will do it for you automatically. What you need is just send one command to the module. Then it will send back what you want. Anything is just so simple and so easy. Also, if there is any card go into the rf field, the red led [...]
- [RDM6300 125KHz EM4100 RFID Card ID Reader Module](https://digilogelectronics.com/product/rdm6300-125khz-em4100-rfid-card-id-reader-module/): RDM6300 125KHz EM4100 RFID Card ID Reader Module is designed for reading code from 125KHz card compatible read-only tags and read/write the card. It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc. Features:  Maximum effective distance up to 150mm  Less than 100ms decoding time  Support external antenna  Uart interface  Support EM4100 compatible read-only or read/write tags  Small outline design  
- [Correlation Photoelectric Infrared Count Slot Sensor Module 15 mm](https://digilogelectronics.com/product/correlation-photoelectric-infrared-count-slot-sensor-module-15-mm/): The correlation photoelectric Infrared count slot sensor module is a high-quality infrared Counter module at a very cheap price which comes with tiny size and integrated LM 393 chip. The module can be used with a microcontroller, Arduino, and even Raspberry Pi for motor speed detection, pulse count, position detection, pulse counting. This module can basically detect when an object passes between the transmitter and the receiver and breaks the beam. It works as, The OUT pin is a low level when there is no object between the photoelectric sensor, and the red LED is lit.  The OUT pin is a high level [...]
- [MR60FDA1 60GHz mmWave Sensor – Fall Detection Pro Modul](https://digilogelectronics.com/product/mr60fda1-60ghz-mmwave-sensor-fall-detection-pro-modul/): MR60FDA1 60GHz mmWave Radar Sensor – Fall Detection Module Pro implements human activities detection including moving, falling, and stationery based on 60GHz Frequency Modulation Continuous Wave(FMCW) detected theory, providing a fully private and secure environment, independently from other noisy influences. Additionally, with built-in a standard algorithm and onboard antenna, the unit ensures simultaneous signal output with high accuracy. It represents an ideal solution for high-accurate, self-regulation, privacy-protected, secure biotic radar systems in private property surveillance, falling caution, elderly health care, and performing well in homes, hotel, as well as hospitals. In comparison to 24 GHz mmWave fall detection radar sensors, 60 [...]
- [M274 360 Degree Rotary Encoder Brick Sensor Module](https://digilogelectronics.com/product/m274-360-degree-rotary-encoder-brick-sensor-module/): The M274 360 Degree Rotary Encoder Brick Sensor Module is a rotary input device (as in knob) that provides an indication of how much the knob has been rotated AND what direction it is rotating in. It’s a great device for stepper and servo motor control.  You could also use it to control devices like digital potentiometers. M274 360 rotary Degree encoder, is an incremental electro-mechanical device that converts the angular position or motion of a shaft or axle to digital code. The output of incremental encoders provides information about the motion of the shaft, which is typically further processed in processor/controllers into information [...]
- [Waveshare Infrared Reflective Sensor](https://digilogelectronics.com/product/waveshare-infrared-reflective-sensor/): The reflective module with IR sensor is equipped with digital and analogue output. It works with a voltage from 3 V to 5.3 V. It enables the detection of obstacles in the range from 0 to 30 mm. An infrared sensor contains two parts: an infrared transmitter and an infrared receiver, the infrared transmitter consists of an infrared LED array as a luminophore and a PN junction made of a special material with high infrared radiation efficiency, which usually is GaAs. When a current injected into the PN junction by forward bias voltage, it can excite a source of infrared light [...]
- [GY-906 MLX90614ESF -DCI Sensor Module](https://digilogelectronics.com/product/gy-906-mlx90614esf-dci-sensor-module/): This is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614’s high accuracy and resolution. It has a huge number of applications including body temperature measurement and movement detection. The sensor has a field of view of 5 degrees and returns the average temperature value of all objects within this field of view. GY-906 MLX90614ESF-DCI non-contact infrared thermometer for use with Arduino, or any microcontroller that can communicate with it through its I2C interface. This sensor comes with a breakout board with all of the components needed for operation and two types [...]
- [GY-906 MLX90614ESF -BCC Contactless Temperature Sensor Module](https://digilogelectronics.com/product/gy-906-mlx90614esf-bcc-contactless-temperature-sensor-module/): GY-906 MLX90614ESF -BCC Contactless Temperature Sensor Module is an infrared thermometer for use with Arduino or any microcontroller that can communicate with it through its I2C interface. This is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614’s high accuracy and resolution. It has a huge number of applications including body temperature measurement and movement detection. The sensor has a field of view of 35 degrees and returns the average temperature value of all objects within this field of view. Note: This sensor comes with a breakout board with all of the [...]
- [MQ-3 Alcohol Detector Gas Sensor Module](https://digilogelectronics.com/product/mq-3-alcohol-detector-gas-sensor-module/): This MQ-3 Alcohol Detector Gas Sensor Module is simple to use. MQ-3 Alcohol Detector Module which can sense the presence of Alcohol in the air. The module uses our MQ-3 sensor. It simplifies the interface to the odd pin spacing of the sensor and provides an interface through standard 4 x 0.1″ header pins. It provides an analog output corresponding to the concentration of the gas in the air and an easy to use digital output. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered. Just power the module with 5V set [...]
- [GY-9960-3.3 APDS-9960 RGB Infrared Gesture Sensor Motion Direction Recognition Module](https://digilogelectronics.com/product/gy-9960-3-3-apds-9960-rgb-infrared-gesture-sensor-motion-direction-recognition-module/): This is the  RGB and Gesture Sensor, a small breakout board with a built-in APDS-9960 sensor that offers ambient light and color measuring, proximity detection, and touchless gesture sensing. With this RGB and Gesture Sensor you will be able to control a computer, microcontroller, robot, and more with a simple swipe of your hand! This is, in fact, the same sensor that the Samsung Galaxy S5 uses and is probably one of the best gesture sensors on the market for the price. The APDS-9960 is a serious little piece of hardware with built-in UV and IR blocking filters, four separate diodes [...]
- [MQ-9 Carbon Monoxide, Methane and LPG Gas Sensor Module](https://digilogelectronics.com/product/mq-9-carbon-monoxide-methane-and-lpg-gas-sensor-module/): This is MQ-9 Carbon Monoxide, Methane, and LPG Gas Sensor Module can be used to sense Carbon Monoxide and Methane Gas. Sensitive material of the MQ9 gas sensor is SnO2, which with lower conductivity in clean air. It makes detection by the method of cycle high and low temperature, and detect CO when the low temperature (heated by 1.5V). The sensor’s conductivity is higher along with the gas concentration rising. When a high temperature (heated by 5.0V), it detects Methane, Propane, etc. combustible gas and cleans the other gases adsorbed under low temperature. Wire Connections VCC – Positive pole (5V) GND – Negative pole DO – TTL [...]
- [MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module](https://digilogelectronics.com/product/mq-6-liquefied-petroleum-isobutane-propane-gas-sensor-module/): MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module is a great way to add basic gas sensing to your project at a reasonable price. TheMQ-5 Methane LPG Liquid Propane Gas Sensor Module particulate sensor uses a Buzzer to sense any detected material that is even present in the air!  This is a simple-to-use MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 200 to 10000ppm. The MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module particulate sensor uses a Potentiometer to change the detection range of the sensor!  [...]
- [MQ-5 Methane LPG Liquid Propane Gas Sensor Module](https://digilogelectronics.com/product/mq-5-methane-lpg-liquid-propane-gas-sensor-module/): The Simple MQ-5 Methane LPG Liquid Propane Gas Sensor Module is a great way to add basic gas sensing to your project at a reasonable price. TheMQ-5 Methane LPG Liquid Propane Gas Sensor Module particulate sensor uses a Buzzer to sense any detected material that is even present in the air!  This MQ-5 Methane LPG Liquid Propane Gas Sensor Module is widely used in gas leakage detecting pieces of equipment in family and industry, are suitable for detecting LPG, natural gas, town gas, avoid the noise of alcohol and cooking fumes and cigarette smoke The MQ5 ( MQ-5 ) is used in gas leakage detecting [...]
- [MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection](https://digilogelectronics.com/product/mq-8-hydrogen-gas-sensor-module-h2-alarm-detection/): A sensitive material MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection use in clean air low conductivity tin oxide (SnO2). When there is the environment in which the combustible gas sensor, conductivity sensor with increasing concentration of combustible gases in air increases. Using a simple circuit to convert the change in conductivity of the gas concentration corresponding to the output signal. MQ-8 hydrogen gas sensor of high sensitivity, the monitoring of the other hydrogen-containing gas is also very satisfactory. This sensor can detect a wide range of hydrogen gas, city gas, in particular, is a low-cost sensor for a variety of [...]
- [MQ-7 CO Carbon Monoxide Coal Gas Sensor Module](https://digilogelectronics.com/product/mq-7-co-carbon-monoxide-coal-gas-sensor-module/): MQ-7 CO Carbon Monoxide Coal Gas Sensor Module detects the concentrations of CO in the air and outputs its reading as an analog voltage. The sensor can measure concentrations of 10 to 10,000 ppm. The sensor can operate at temperatures from -10 to 50°C and consumes less than 150 mA at 5 V. This module provides both digital and analog outputs. The threshold level for digital output can be easily adjusted using the preset on the board. The MQ-7 sensor module can be easily interfaced with Micro-controllers, Arduino and etc. Standard Test Conditions Temperature: 20°C ± 2°C Humidity: 65% ± 5% RH Standard Test Circuit: Vc: 5.0V ± [...]
- [MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module](https://digilogelectronics.com/product/mq-2-smoke-lpg-butane-hydrogen-gas-sensor-detector-module/): If you are searching for a Gas sensor module with a very High detection range compared to any ordinary gas sensor then this MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module will fulfill your specification demands. The MQ-2 Gas sensor detector module has a detection range of 300-10000 ppm. The gas sensor modules are always well known for their robust and simple construction and measures toxic gases in very low concentrations. The MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module is useful for gas leakage detection (home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol, Smoke, or Propane. Due to its high sensitivity [...]
- [MQ135 Air Quality/Gas Detector Sensor Module For Arduino](https://digilogelectronics.com/product/mq135-air-quality-gas-detector-sensor-module-for-arduino/): This is a MQ 135 Air Quality/Gas Detector Sensor Module For Arduino. If you are want to make a device that is used to detect Ammonia, Sulphide, and Benzene steam, also sensitive to smoke and other harmful gasses from the desired distance, then this sensor is needed for you.y0u can buy this sensor from RNSbot at a reasonable price. The MQ 135 Air Quality Detector Sensor Module For Arduino has lower conductivity in clean air. When the target combustible gas exists, the conductivity of the sensor is higher along with the gas concentration rising. Convert the change of conductivity to the corresponding output signal of gas concentration. The MQ135 gas sensor [...]
- [ADXL345 Digital Angle Acceleration Sensor Module](https://digilogelectronics.com/product/adxl345-digital-angle-acceleration-sensor-module/): The ADXL345 is a low-power, 3-axis MEMS accelerometer modules with both I2C and SPI interfaces. The Breakout boards for these modules feature on-board 3.3v voltage regulation and level shifting which makes them simple to interface with 5v microcontrollers such as the Arduino. The ADXL345 features 4 sensitivity ranges from +/- 2G to +/- 16G. And it supports output data rates ranging from 10Hz to 3200Hz. ADXL345 is very suitable for mobile applications. It can be applied to the skew detection in the measurement of the static acceleration of gravity, also can measure the movement or impact caused by the dynamic acceleration. [...]
- [MQ-136-Hydrogen Sulfide Gas Sensor](https://digilogelectronics.com/product/mq-136-hydrogen-sulfide-gas-sensor/): MQ-136-Hydrogen Sulfide Gas Sensor can be used to monitor the concentration of Hydrogen Sulfide gas. This Module simplifies using the MQ-136 gas sensor by providing digital as well as analog output which can be interfaced to Microcontrollers, Arduino, and Raspberry pi. The sensitive material of the MQ136 gas sensor is SnO2, which with lower conductivity in clean air. When the target Hydrogen sulfide gas exists, the sensor’s conductivity is higher along with the Hydrogen sulfide concentration rising. Please use a simple electric circuit, Convert the change of conductivity to correspond output signal of gas concentration. MQ136 gas sensor has a high [...]
- [MQ-137 Ammonia Gas NH3 Sensor Module](https://digilogelectronics.com/product/mq-137-ammonia-gas-nh3-sensor-module/): MQ-137 Ammonia Gas NH3 Sensor Module The MQ137 sensor is a gas sensor module is specially designed to detect and sense gases like ammonia (NH3) and carbon monoxide (CO). The MQ137 gas sensor module comes with digital pins that can be connected to a microcontroller like Arduino boards and come in handy when you are only trying to detect one particular gas. Applications of MQ137 Gas Sensor Detector measure Gases like NH3 or CO Air quality monitor Gas leak alarm Safety standard maintenance Maintaining environmental standards  in hospitals How to detect gases with the MQ-137 gas sensor module? Power the gas [...]
- [SHARP Distance Measuring Sensor unit 20 to 150 cm – GP2Y0A02YK0F](https://digilogelectronics.com/product/sharp-distance-measuring-sensor-unit-20-to-150-cm-gp2y0a02yk0f/): The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than other IR alternatives. Interfacing to most microcontrollers is straightforward: the single analog output can be connected to an analog-to-digital converter for taking distance measurements, or the output can be connected to a comparator for threshold detection. The detection range of this version is approximately 20 cm to 150 cm (8″ to 60″). The GP2Y0A02 uses a 3-pin JST PH connector that works with our 3-pin JST PH cables for Sharp distance sensors (not included) the top picture [...]
- [18650 5V 2.4A Lithium, Battery Digital Display, Charging Module Dual, USB Output Band, Display Booster, Mmodule](https://digilogelectronics.com/product/18650-5v-2-4a-lithium-battery-digital-display-charging-module-dual-usb-output-band-display-booster-mmodule/): Do you want to build your own QUICK CHARGE power bank from your spare 18650 battery cells?  Then this 18650 5V 1A/2.4A Lithium Battery Digital Display Charging Module is for you. Just like a modern power bank, the module is equipped with Dual USB output to charge the gadgets at 1A / 2.1A. To charge the batteries, this module has two USB inputs one is C-type input, and the other is a MicroUSB input. Onboard, a brilliant blue-colored illuminating LED Display displays the real-time battery percentage in the 0–100% range, as well as the IN and OUT Signal. Furthermore, the board contains a [...]
- [Dual USB Output 9V/12V/24V to 5V 3A DC-DC Car Charging Voltage-Stabilizer Module](https://digilogelectronics.com/product/dual-usb-output-9v-12v-24v-to-5v-3a-dc-dc-car-charging-voltage-stabilizer-module/): This is Dual USB Output 9V/12V/24V to 5V 3A DC-DC Car Charging Voltage-Stabilizer Module. It can be directly installed on  9V/12V/24V  vehicle battery to charge the mobile tablet or any other gadget which need 5V DC supply up to  3A. The module has the variable input voltage range ranging from 6V to 24V. Two USB output provides the Stabilized 5V DC output at both Channels simultaneously Caution Note The input voltage should not exceed 24V, otherwise, the chip will be damaged. Input positive and negative poles cannot be reversed, otherwise, the chip will be damaged. Do not touch the resistance, capacitance [...]
- [Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger](https://digilogelectronics.com/product/dual-micro-usb-3-7v-to-5v-2a-power-bank-diy-18650-lipo-charger/): Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger with LED. This is the mobile power module Accessories, 18650 Circuit board shell. Meet the individual needs of your DIY, but you must understand basic electronic assembly. To know more about Arduino Powerbank click here! For more Lipo charger visit here! We need to note the following points when installing products: Batteries to parallel, the voltage in 3.2-4.2V can work between, 18650 flat and polymer battery can be. We can connect the battery to the motherboard B + negative-, installed against the necessary burning motherboard. New and old batteries, model brand inconsistent batteries [...]
- [5V 2A Wireless Transmitter Receiver Charging Coil Module](https://digilogelectronics.com/product/5v-2a-wireless-transmitter-receiver-charging-coil-module/): The 5V 2A wireless transmitter receiver charging coil module is for a variety of small electronic products, wireless charging, power supply development, and design, with a small size, easy to use, high efficiency, and low price characteristics. It is mainly used in mobile electronics products such as for charging mobile phones and electronics gadgets wirelessly. The adoption of a Contactless charging power supply can be used to sealing of the products to make them waterproof and dustproof and increase product service life to make it more convenient. Note: Actual product may vary in terms of design.  It is necessary to keep [...]
- [XH-M601 12V Battery, Charging Control Board, Intelligent Charger Power, Control Panel Automatic, Charging Power](https://digilogelectronics.com/product/xh-m601-12v-battery-charging-control-board-intelligent-charger-power-control-panel-automatic-charging-power/): This is a XH-M601 12V Battery Charging Control Board Intelligent Charger Power Control Panel Automatic Charging Power. Potentiometer Adjustment: RP1:adjust storage battery start charging voltage (low voltage setting: clockwise becomes higher, counter-clockwise becomes lower) RP2:adjust storage battery disconnect charging voltage (low voltage setting: clockwise becomes higher, counter-clockwise becomes lower) Features It is very smart and helps to save electricity, and is safe. Automatically power off, save energy and extend battery life. Durable, Charging Protection, Easy to Install  
- [WeMos D1 Lithium Battery Charger Board with Mini USB](https://digilogelectronics.com/product/wemos-d1-lithium-battery-charger-board-with-mini-usb/): The WeMos lithium battery shield provides a means of powering your WeMos mini, or WeMos mini Pro (see item HCWEMO0002) from a single cell (3.7V) lithium battery. The shield contains a DC-DC converter to step-up the batteries 3.7V to 5V supplying your WeMos mini and shields with up to 1A of power. When the battery is depleted simply plug the shield into a USB power source using a mini USB cable and it will automatically recharge the battery. Two LEDs on the shield indicate when the battery is charging and when charging has completed. You can use D1 mini without USB [...]
- [6S 25A 18650 Lithium Battery Protection Board](https://digilogelectronics.com/product/6s-25a-18650-lithium-battery-protection-board/): Battery protection board, as the name suggests battery protection board is mainly rechargeable (Refers to the lithium battery) and protects the integrated circuit board. As the lithium battery, its material determines itself can not be overcharge, over-discharge, overcurrent, short circuit, and ultra-high temperature charge and discharge, so lithium battery lithium components will always follow A protective plate with sampling resistor, and a current fuse. Providing all above features this 6S BMS board can combine 6 x 18650 battery to form a battery pack to provide up to 25V DC output at 25A current which can be used for heavy applications such [...]
- [Farra Capacitor Protection Board Balance Board 2.7/16V Lithium Titanate Battery Protection Board with Indicator Light](https://digilogelectronics.com/product/farra-capacitor-protection-board-balance-board-2-7-16v-lithium-titanate-battery-protection-board-with-indicator-light/): This is Farra Capacitor Protection Board Balance Board 2.7/16V Lithium Titanate Battery Protection Board with Indicator Light. The Farra Capacitor Protection Board Balance Board is designed specifically for lithium titanate batteries to protect them from overcharging, over-discharging, and balancing the cell voltages. The 2.7/16V rating indicates its operating voltage range, typically used for lithium titanate batteries, which have a lower nominal voltage compared to other lithium-ion chemistries. The indicator lights on the board usually show the status of the battery, such as charging, fully charged, or any faults in the system. This helps users monitor the battery’s condition and ensure it [...]
- [Arduino Science Kit Rev3 AKX00045](https://digilogelectronics.com/product/arduino-science-kit-rev3-akx00045/): Arduino Science Kit R3 offers hands-on experimental learning to inspire students to conduct exciting experiments and decipher data. The kit, along with the Arduino Science Journal app, facilitates real-time data collection and analysis. Dive headfirst into the fascinating world of physics with the Arduino Science Kit R3. This kit is packed with awesome features that transform the ordinary classroom into a world of interactive, hands-on excitement. Say goodbye to run-of-the-mill lectures and hello to thrilling, interactive experiments where students can experience the thrill of scientific discovery first-hand. Grab the Arduino Science Kit R3, and let the adventure begin! Science has never [...]
- [SUNKKO 4S 5A Active Balancer Equalizer Module](https://digilogelectronics.com/product/): This is the SUNKKO 4S 5A Active Balancer Equalizer Module. The designed SUNKKO battery active equalizer adopts the latest high-frequency transformer inversion and equipotential isolation coupling technology, connecting each battery series in a parallel way, realizing the energy transfer and distribution between batteries with different voltages. 4s 5A six types of equalizers meet your different battery balancing requirements. The superior components, well-designed circuit, and exquisite PCB craft bring you an efficient and reliable battery equalization experience. Features & Specifications Good quality product Easy to use Multiple Choices & Excellent Equalization Effect The newly designed SUNKKO battery equalizer adopts the latest transformer [...]
- [Original Arduino UNO WiFi REV2 ABX00021](https://digilogelectronics.com/product/original-arduino-uno-wifi-rev2-abx00021/): Add WiFi to your devices with the Original Arduino Uno WiFi. It’s basically an Arduino Uno Rev3 with more kick: It comes with a brand new 8-bit microprocessor from Microchip, and an onboard IMU (Inertial Measurement Unit). As for the WiFi connection, that’s made secure with the new ECC608 crypto chip accelerator. Add this board to a device and you’ll be able to connect it to a WiFi network, using its secure ECC608 crypto chip accelerator. The Arduino Uno WiFi is functionally the same as the Arduino Uno Rev3, but with the addition of WiFi and some other enhancements. It incorporates [...]
- [Arduino Nicla Vision ABX00051](https://digilogelectronics.com/product/arduino-nicla-vision-abx00051/): wanted an automated house? Or a smart garden? Well, now it’s easy with the Arduino IoT Cloud compatible boards. It means: you can connect devices, visualize data, control and share your projects from anywhere in the world. Whether you’re a beginner or a pro, we have a wide range of plans to make sure you get the features you need. Nicla Vision combines a powerful STM32H747AII6 Dual ARM® Cortex® M7/M4 IC processor with a 2MP color camera that supports Tiny ML, as well as a smart 6-axis motion sensor, integrated microphone and distance sensor. You can easily include it into any project because it’s designed to [...]
- [HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module](https://digilogelectronics.com/product/hm-10-ble-bluetooth-4-0-cc2541-wireless-module/): HM-10 BLE Bluetooth 4.0 CC2541 Wireless Module is a BLE module for an embedded system to get BLE wireless communication with BLE capable devices (e.g. Android, iPhone, and iPad). It is fully configurable by a rich and well documented AT command-set and allows transparent data communication via serial UART (default baud rate 9600bps). The Bluetooth 4.0 HM-10 is basically a breakout board for cc2541, it broke out the LED pins, RX/TX and also adding the voltage regulator that regular 5v to 3.3 v. HM-10 and HM-11 series Bluetooth module use TI CC2540 chip, configure 256KB space and support the AT command. Users can change the role (master, slave [...]
- [Arduino Portenta Vision Shield – Ethernet ASX00021](https://digilogelectronics.com/product/arduino-portenta-vision-shield-ethernet-asx00021/): The Portenta Vision Shield brings industry-rated features to your Arduino Portenta. This hardware add-on will let you run embedded computer vision applications, connect wirelessly or via Ethernet to the Arduino Cloud or your own infrastructure, and activate your system upon the detection of sound events. The Vision Shield Ethernet has been designed to work with the Arduino Portenta H7. The Portenta boards feature multicore 32-bit ARM Cortex processors running at hundreds of megahertz, with megabytes of program memory and RAM. Portenta boards come with WiFi and Bluetooth. Features A 320×320 pixels camera sensor uses one of the cores in Portenta to [...]
- [Arduino Nicla Voice ABX00061](https://digilogelectronics.com/product/arduino-nicla-voice-abx00061/): The 22.86 x 22.86 mm Nicla Voice allows for easy implementation of always-on speech recognition on the edge because it integrates Syntiant’s powerful NDP120 Neural Decision processor to run multiple AI algorithms, leveraging bio-inspired, advanced machine learning to automate complex tasks. Nicla Voice comes with a comprehensive package of sensors: in addition to its microphone, it features a smart 6-axis motion sensor and a magnetometer, making it the ideal solution for predictive maintenance, gesture/voice recognition, and contactless applications. Nicla Voice offers onboard Bluetooth Low Energy connectivity to easily interact with existing devices and is compatible with Nicla, Portenta and MKR products. [...]
- [TEA5767 Stereo FM Radio Module with Detachable Antenna](https://digilogelectronics.com/product/tea5767-stereo-fm-radio-module-with-detachable-antenna/): TEA5767 Stereo FM Radio Module with Detachable Antenna is made using TEA5767, a single-chip electronically tuned stereo FM radio for low voltage applications. It has fully integrated Intermediate Frequency (IF) selectivity and FM demodulator. The radio is completely adjustment-free and is very easy to use as it requires only minimum external components. This module can be tuned to many FM bands and it can be easily interfaced with Arduino Boards, Raspberry Pi, and Microcontrollers via the I2C interface. The Module has reverse polarity protection diode and power output filtering sensor. It can be Directly plugged to the antenna interface. Additionally, it has [...]
- [TTP223 Touch Key Module – 2Pcs](https://digilogelectronics.com/product/ttp223-touch-key-module-2pcs/): The TTP223 Touch Key Module is based on a touch-sensing IC (TTP223) capacitive touch switch module. A capacitive touch sensor module based on the dedicated TTP223 touch sensor IC. The module provides a single integrated touch sensing area of 11 x 10.5mm with a sensor range of ~5mm. An onboard LED will give a visual indication of when the sensor is triggered. When triggered the output of the module will switch from its idle low state to high (default operation). Solder jumpers allow for reconfiguring its mode of operation to be either active low or toggle output. TTP223 Capacitive Touch Sensor [...]
- [PN532 NFC RFID Read / Write Module V3 Kit](https://digilogelectronics.com/product/pn532-nfc-rfid-read-write-module-v3-kit/): The PN532 is a highly integrated transmission module for contactless communication at 13.56 MHz including microcontroller functionality based on an 80C51 core with 40 Kbytes of ROM and 1 Kbytes of RAM. The PN532 combines a modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at 13.56 MHz with an easy-to-use firmware for the different supported modes and the required host controller interfaces. It works as RFID reader/writer,1443-A card or a virtual card and also supports NFC with Android phone. It is also compatible with Arduino. Note : HW-147 on board working remains same . [...]
- [TTP229 16-Way Capacitive Touch Switch Digital keypad Module](https://digilogelectronics.com/product/ttp229-16-way-capacitive-touch-switch-digital-keypad-module/): This is TTP229 16-Way Capacitive Touch Switch Digital Touch Sensor Keypad Module. This capacitive touch sensor module uses the TTP229 integrated circuit, making it easy to add capacitive touch input to your project. It features 16 sensitive touch pads that make an ideal replacement for the old fashioned keypads. Capacitive touch allows electronics to sense when your finger is within a few millimetres of a surface to simulate a button “press” just like how the pushbutton works. Capacitive sensing may be used in any place where low to no force human touch sensing is desirable. This is a 16 switch based [...]
- [L293D Motor Driver/Servo Shield for Arduino](https://digilogelectronics.com/product/l293d-motor-driver-servo-shield-for-arduino/): The L293D Motor Driver/Servo Shield for Arduino is probably one of the most versatile on the market and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project. This Arduino compatible motor Driver shield is a full-featured product that it can be used to drive 4 DC motor or two 4-wire steppers and two 5v servos. It drives the DC motor and stepper with the L293D, and it drives the servo with Arduino pin9 and pin10. The shield contains two L293D motor drivers and one 74HC595 shift register. The shift register expands 3 pins of the [...]
- [TKS-M8 DC Motor Driver Module P0/Self-Locking Version](https://digilogelectronics.com/product/tks-m8-dc-motor-driver-module-p0-self-locking-version/): This is the TKS-M8 DC Motor Driver Module P0/Self-Locking Version. This Motor controller is used to control motor work status to make sure motor can be precisely controlled. Applicable to occasions where the motor control requirements are increased. Note: The actual product may vary in slight variation in color and components with the image shown depending upon quantity availability. Features Low power consumption Long work time Automatic control Support DC motor forward and reverse Support Limit operation Work output LED indicator
- [150W DC-DC Boost Converter 10-32V to 12-35V 6A Step-Up Adjustable Power Supply](https://digilogelectronics.com/product/150w-dc-dc-boost-converter-10-32v-to-12-35v-6a-step-up-adjustable-power-supply/): This versatile DC-DC boost power supply/converter module steps up any input voltage from 10V to 32V to any output voltage from 12V to 35V at up to 150W output power and 6A current. This 150W DC-DC Boost Converter 10-32V to 12-35V 6A Step-Up Adjustable Power Supply is well into the heavy-duty end of the spectrum @ 150W; as you can tell by the huge toroidal inductor and dual heatsinks. It is especially useful for automotive 12V applications, where standard 12V battery power can be boosted to 19V for use as a laptop computer power supply, or to 18V or 24V for other applications requiring [...]
- [5000W AC 220V High-Power Electronic Regulator SCR Voltage Regulator Module](https://digilogelectronics.com/product/5000w-ac-220v-high-power-electronic-regulator-scr-voltage-regulator-module/): The 5000W AC 220V High-Power Electronic Regulator SCR Voltage Regulator Module can be connected to a lamp or home appliance or electric circuit, then through the keys Adjust the speed, brightness, voltage, temperature. Features  High-temperature FR-4 PCB 100% High quality and Brand new Control the speed of a Brushed AC motor with this controller High efficiency, high torque, low heat generating Aluminum sheet cooling, rapid cooling With reverse polarity protection, high current protection High-temperature resistant FR – 4 circuit board.  
- [4000W High-Power Thyristor Electronic Regulator, Dimming Speed Regulation, with Shell](https://digilogelectronics.com/product/4000w-high-power-thyristor-electronic-regulator-dimming-speed-regulation-with-shell/): This is a 4000W Thyristor SCR Voltage Regulator Temperature Dimmer for Speed / Light (AC 220V). 4000W Thyristor SCR Voltage Regulator is SCR Dimmer which can be used to control 220V Appliances. It can be used as a light dimmer, fan speed controller, stove temperature controller. It is easy and simple to use and can control appliances up to 4000W! Just give AC input to the module and connect the appliance at the output of the module, then use the onboard potentiometer knob to adjust and set the required power output from your 220V Device. Appliances  Electric furnace,water heater,lamps,small motor,electric iron.etc [...]
- [DC to DC 6-24V to 5V USB Output Step Down Power Charger Buck Converter](https://digilogelectronics.com/product/dc-to-dc-6-24v-to-5v-usb-output-step-down-power-charger-buck-converter/): This is a DC to DC 6-24V to 5V USB Output Step Down Power Charger Buck Converter This mini DC-DC step-down voltage converter module supports 6-24V voltage input and 5V 3A output with input polarity reverse protection and output overvoltage protection, short circuit protection. It adopts synchronous rectification technology to ensure ultra-high power conversion of up to 97.5% to take full use of your input power. On-board female type A USB port with identification circuit perfectly fit for iPhone iPad and Android smartphones as well as it can be useful to power or recharge any electronic gadget which requires 5V input [...]
- [24V/12V to 5V 5A Power Module DC-DC XY-3606 Power Converter](https://digilogelectronics.com/product/24v-12v-to-5v-5a-power-module-dc-dc-xy-3606-power-converter/): This is a 5A power module DC-DC step-down module 24v/12V to 5V power converter module. With synchronous rectification scheme, wide voltage, high current, and high efficiency. Note : HCW-P715 & HW-668 on board working is same . Features The synchronous rectification scheme, wide voltage, high current, high efficiency. With DC plug and terminals, easy to use. With USB port, fast-charge identification chip compatible with Android and iPhone mobile phones.  
- [USB type A to Mini USB Cable~ 1m](https://digilogelectronics.com/product/usb-type-a-to-mini-usb-cable-1m/): This is a USB type A to Mini USB Cable~ 1m. You can use it as a mobile data transfer cable. It is 1 meter long. This cable is mainly used for Arduino boards and Flight Controller Boards. These are good quality connectors and have a long life. Features 1-meter long cable Long life Good quality USB Type: USB to Mini USB  
- [Ufl/ Ipex/ Mhf1 Rf Connector](https://digilogelectronics.com/product/ufl-ipex-mhf1-rf-connector/): This UFL/ IPEX/ MHF1 RF connector connects an Antenna to a communication device. It’s also called an IPEX connector. This is male type UFL connector with SMT mounting and a female-type MHF1 connector. It is generally used in antenna connection for Wifi, GSM, GPS, etc. modules. Features High quality. Low cost. Interconnects. Specifications Frequency (MHz): 0 – 6.0 GHz Working Voltage (V): 200 V Insulation Resistance: >500 MOhm Contact Resistance: 10mA Max VSWR: < 1.4 Body, Metal Parts: Brass with Gold Plated Centre Contact: Phosphor Bronze with Gold Plated Insulators: PTFE Dimensions (L X H X W) : 2.5 X 2.5 [...]
- [SIM800L V2 5V Wireless GSM GPRS MODULE Quad-Band with Antenna](https://digilogelectronics.com/product/sim800l-v2-5v-wireless-gsm-gprs-module-quad-band-with-antenna/): SIM800L V2 5V Wireless GSM GPRS MODULE Quad-Band with Antenna power supply for 5 v, computer debug USB to TTL serial port. Power to the output current of 800 ma, TTL serial interface is compatible with 3.3 V and 5 V micro-controller, can be directly after purchase and single-chip computer connection. The IPX antenna, the antenna interface can be arbitrary switching PCB glue stick antenna and suction cups. SIM800L 4 frequency communications, data available in the world. Do foreign trade and foreign trade projects preferred. SIM800L V2.0 GSM/GPRS Module is a QUAD-BAND GSM/GPRS module which compatible with Arduino. The module works [...]
- [TDA7492P 50W Wireless Digital Audio Receiver Amplifier Board](https://digilogelectronics.com/product/tda7492p-50w-wireless-digital-audio-receiver-amplifier-board/): This is TDA7492p based is Class-D audio amplifier.  This module has integrated a Bluetooth module, all the used components in the amplifying process, output connectors and control buttons. All you need to do is supply 12V to 36A to it, connect an 8-ohm 50W speaker to each output and connect a Bluetooth device to it and enjoy and control your favourite music wirelessly. In the layout above you can see that the board has 5 control buttons. You can also use those to change the track or control the volume. There is a DIP 2 switches button. Combining the up/down position [...]
- [DFRobot 2-Channel I2C DAC Module (0-10V)](https://digilogelectronics.com/product/dfrobot-2-channel-i2c-dac-module-0-10v/): This 2-Channel I2C DAC module can output a voltage of 0-10V, which is a standard driver in industrial applications. It can be widely used with most 0-10V devices on markets such as light controllers, inverters, valves, pumps, etc, by Arduino programming. Besides, this module supports 8 different I2C addresses, which can be changed using the on-board DIP switch, allowing a cascade of 16 devices. Applications Intelligent function signal generator Automatic controlling of lighting or fountain Automatic and quick transformation of small equipment Automatic debugger for electromechanical equipment Transformation of small test equipment Features Support 3.3V-5V power supply Output voltage error is less [...]
- [DFRobot Gravity Digital Vibration Sensor](https://digilogelectronics.com/product/dfrobot-gravity-digital-vibration-sensor/): They are used for measuring fluctuating accelerations or speeds or for normal vibration measurement. Maintenance professionals use the sensors in order to predict the maintenance of the machinery, reduce overall costs, and increase the performance of the machinery,  The vibration levels can be supplied to any controllers/processors/ and necessary decisions can be obtained as required though it, This module has triple output mode i.e. – digital output – is simple, analog output which is more accurate and serial output with exact readings. The general 3 types of vibration sensors are 1) displacement sensors, 2) velocity sensors, and 3) accelerometers. Accelerometers are the best [...]
- [DFRobot Gravity SGP40 Air Quality Sensor](https://digilogelectronics.com/product/dfrobot-gravity-sgp40-air-quality-sensor/): This is DFRobot Gravity SGP40 Air Quality Sensor. The SGP40 Air Quality sensor adopts the new SGP40 digital VOC sensor chip launched by the well-known Sensirion. Based on the Sensirion’s CMOSens® technology, the SGP40 offers a complete sensor system on a single chip, a temperature-controlled micro-hotplate, and a humidity-compensated indoor air quality signal. In combination with Sensirion’s powerful VOC algorithm, the sensor signal can be directly used to evaluate indoor air quality. It features low power(2.6mA), fast response(2s), and small size. The data from the sensor can be directly used to evaluate air quality without calibration. Integrated with an easy-to-connect Gravity [...]
- [DFRobot Gravity: Digital RGB LED Module](https://digilogelectronics.com/product/dfrobot-gravity-digital-rgb-led-module/): Gravity: Digital RGB LED Module is a cascadable single RGB LED module compatible with RGB LED strip. The Gravity interface provides a more elegant manner for the connections between modules and most of mainstream controllers such as Arduino, micro:bit, Firebeetle Series, LattePanda, and Raspberry Pi with an abundant kinds of DFRobot IO expansion shield. Compared to the traditional RGB LED module, where three control signal pins are required for a single LED, this module only needs one signal pin for all LEDs in cascade. Thanks to such individual module design, RGB LED strip built by such independent modules can realize extremely [...]
- [DFRobot Gravity: Smart Grayscale Sensor](https://digilogelectronics.com/product/dfrobot-gravity-smart-grayscale-senso/): This time we reinvented the line-tracking sensor. Beyond recognizing two specific colors or output through digital or analog only, the Smart Gray Sensor has integrated both digital and analog output features. In digital mode, user can have two color data recorded through simple button operation, to achieve two-color detections with high and low outputs, and requires no more configuration after being set. In analog mode, the output value reacts precisely to the color grayscale detected. Apart from being a stable and adaptative sensor in various environments, the Smart Grayscale Sensor also demonstrates a great potential in low-cost projects of color, grayscale [...]
- [DFRduino Nano (Arduino Nano Compatible)](https://digilogelectronics.com/product/dfrduino-nano-arduino-nano-compatible/): The DFRduino Nano USB Microcontroller V3.1 (ATMega 328) is a breadboard-ready version of the ” Arduino mini” with integrated USB. The “Arduino Nano” has everything that the Diecimila has (electronically) with more analog input pins and an on-board +5V AREF jumper. The “Arduino Nano” automatically senses and switches to the higher power supply, so there is no need for a power select jumper. The nano’s pin layout works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other). The DFRobot DFRduino Nano USB Microcontroller V3.1 (ATMega 328) can be powered [...]
- [DFRobot Gravity Digital Magnetic Sensor](https://digilogelectronics.com/product/dfrobot-gravity-digital-magnetic-sensor/): A magnetic sensor is a sensor that detects the magnitude of magnetism and geomagnetism generated by a magnet or current. These sensors are used to detect extremely low values of the magnetic fields like 1uG (1 Gauss is equal to 10-4 Tesla. The best examples of this are Nuclear procession, Fiber optic, and SQUID. The applications of low-field sensors mainly include nuclear as well as medical fields. The advantages of magnetic sensors are low cost and ruggedness. Rotational speed and position sensors are used in the automotive industry (e.g., for ignition timing and anti-lock braking systems). They are most often based on a Hall [...]
- [DFRobot Gravity Alcohol Sensor (0-5ppm)](https://digilogelectronics.com/product/dfrobot-gravity-alcohol-sensor-0-5ppm/): This is an Arduino-compatible alcohol sensor module from DFRobot with a 0-5ppm measuring range, supporting I2C and UART outputs. Aiming at fast and accurate detection of alcohol gas concentration in the air, the sensor is well applicable to the small alcohol concentration measurement in breathalyzers, smart vehicles, and so on. Based on the electrochemistry principle, this alcohol sensor has been calibrated before the factory. It is characterized by strong anti-interference, high stability, and sensitivity, and up to 2 years of service life. The module supports 0.01ppm(10ppb) resolution and 3.3~5.5V wide-range voltage input and works well with mainstream controllers like Arduino, ESP32, and Raspberry Pi. [...]
- [DFRobot Fermion: MEMS Microphone Module](https://digilogelectronics.com/product/dfrobot-fermion-mems-microphone-module/): This is DFRobot Fermion: MEMS Microphone Module. DFrobot offers an advanced level of sensors at an affordable cost than any other competitor brand in the market, making them ideal for the one who wants to start some Projects through Different types of sensors. After finding Different types of sensors on market, we at robu.in have determined that DFrobot is one of the good brands that offer a wide range of sensors at an Appropriate price. This tiny MEMS microphone has an amplifier gain of 66. When there is no sound detected, it outputs voltage around 0.66*VCC. When speaking, you can easily [...]
- [DFRobot Gravity: Digital Weight Sensor](https://digilogelectronics.com/product/dfrobot-gravity-digital-weight-sensor/): This Electronic Arduino Weight Sensor is able to detect 1kg weight.  It based on HX711, a precision 24-bit analog-to-digital converter designed for weight scale and industrial control applications to interface directly with a bridge sensor. This Electronic arduino weight sensor lowers the cost of the electronic scale, and at the same time improving the performance and reliability. The interface of this sensor uses  DFRobot Gravity Interface. The output adopts compact terminal that makes the sensor easier to connect. It’s the best choose for electronic enthusiast to do some tiny home scale. Sensor connection Note: Red Line — E+                       [...]
- [DFRobot Gravity Analog Signal Isolator](https://digilogelectronics.com/product/dfrobot-gravity-analog-signal-isolator/): Signal isolators are used in industrial, medical, and other environments in which electrical isolation is essential for safety. Signal isolators can also be used to amplify signals, enable instruments to be added to an overburdened loop, or step down dangerous, high-voltage signals to safer levels. In many cases, electrical isolation is required to ensure reliable operation of the sensors. Some sensors, such as pH sensors and conductivity sensors, will interfere with each other and do not measure properly in the same container when they connect to the same power. To ensure the stable and reliable operation of the sensors with no interference, [...]
- [DFRobot MAX98357 I2S Amplifier Module](https://digilogelectronics.com/product/dfrobot-max98357-i2s-amplifier-module/): This I2S digital amplifier based on the MAX98357 I2S Class D amplifier module works great with microcontrollers with I2S audio outputs like ESP32 and can be applied to projects like IoT nodes, smart home devices, Bluetooth audio players, and so on. The module supports a 3.3V-5V power supply. And it can output over 2.5W of power when driven by 5V and a 4Ω speaker. Besides, it allows users to set different modes (off, left channel, right channel, and mixed) by changing the resistance on the SD port. The product defaults to mixed mode. Featuring a small size, this I2S amplifier comes [...]
- [DFRobot Lithium Battery Charger V1.0](https://digilogelectronics.com/product/dfrobot-lithium-battery-charger-v1-0/): If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The Lithium Battery Charger can charge 3.7V LiPo battery at a rate of 500 mA per hour. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the datasheet below to see if it will work with your battery. The board incorporates a charging circuit, status LED, connector for your battery (JST-type used in the batteries we carry), and a Type-C USB connector. Two small mounting holes allows this charger to be easily embedded into a project. Features Lithium battery compatibility Wide [...]
- [DFRobot 5.8GHz Microwave Radar Module](https://digilogelectronics.com/product/dfrobot-5-8ghz-microwave-radar-module/): This microwave sensor is a microwave module that can transmit an electromagnetic wave of 5.8GHz. It can detect the difference between the transmitted wave and the reflection wave to identify whether there is an object moving in the detection area. Different from the traditional sensors that can only detect human presence by detecting big body movements, this microwave sensor can perform well in detecting small movements like breathing so as to determine human presence even if the person is sitting or sleeping. The detected result can be output through the serial port or high/low level of the I/O port. Featuring high [...]
- [DFRobot Gravity: Digital Hall Sensor](https://digilogelectronics.com/product/dfrobot-gravity-digital-hall-sensor/): what’s the best way to detect the magnet? Use anther magnet. But it’s not sensitive enough. You have to feel it by youself.Right！This Hall sensor knows whether there is a magnetic object nearby or not. And it correctly tells you through ditigal output.See below picture for a quick demo! Note: It’s a omnipolar magnet dectector so that it can not tell two polarities apart. Useful link: For more information refer to the tutorial Features Digital sensor for magnetic field detection Outputs digital signals (high/low) Adjustable sensitivity Wide voltage range Compact design  
- [DFRobot Gravity: Digital Shake Sensor](https://digilogelectronics.com/product/dfrobot-gravity-digital-shake-sensor/): DFrobot offers an advanced level of sensors at an affordable cost than any other competitor brand in the market, making them ideal for the one who wants to start some Projects through Different types of sensors. After finding Different types of sensors on market, we at robu.in have determined that DFrobot is one of the good brands that offer a wide range of sensors at an Appropriate price. Do you want to switch lights by just shaking your hand? However, you may don’t want to use a complicated and costly triple-axis accelerometer. This digital shake sensor is sure to meet your needs. [...]
- [DFRobot Beetle ESP32 Microcontroller](https://digilogelectronics.com/product/dfrobot-beetle-esp32-microcontroller/): Is FireBeetle ESP32 IoT Microcontroller too big for your projects? Why not try our newly launched Beetle-ESP32. This Beetle-ESP32 Microcontroller of 1.38”×1.34” small size is a simplified version of FireBeetle ESP32 IoT Microcontroller and specially designed for electronic engineering fans and DIY lovers. It is equipped with 4 analog ports, 4 digital ports, UART and I2C interfaces, which would be a perfect replacement of FireBeetle ESP32 IoT Microcontroller. This microcontroller enables users to directly burn programs via the on-board USB interface. Meanwhile, Bluetooth and WIFI are integrated in the microcontroller for supporting more applications. With this Beetle-ESP32, you can easily build up your dreaming project. Useful link For more [...]
- [DFRobot Gravity: Digital Hall Sensor](https://digilogelectronics.com/product/dfrobot-gravity-digital-hall-sensor-2/): what’s the best way to detect the magnet? Use anther magnet. But it’s not sensitive enough. You have to feel it by youself.Right！This Hall sensor knows whether there is a magnetic object nearby or not. And it correctly tells you through ditigal output.See below picture for a quick demo! Note: It’s a omnipolar magnet dectector so that it can not tell two polarities apart. Useful link: For more information refer to the tutorial Features Digital sensor for magnetic field detection Outputs digital signals (high/low) Adjustable sensitivity Wide voltage range Compact design  
- [DFRobot Gravity I2C Oxygen Sensor](https://digilogelectronics.com/product/dfrobot-gravity-i2c-oxygen-sensor/): The DFRobot Gravity I2C Oxygen Sensor is based on electrochemical principles and it can measure the ambient O2 concentration accurately and conveniently. With high anti-interference ability, high stability, and high sensitivity, this Arduino-compatible oxygen sensor can be widely applied to fields like portable devices, air quality monitoring devices, and industries, mines, warehouses, and other spaces where the air is not easy to circulate. This compact dfrobot oxygen sensor supports I2C output, it can be calibrated in the air, can accurately measure the oxygen concentration in the environment. It is compatible with many mainboards like Arduino Uno, esp32, Raspberry Pi, and so on. Its [...]
- [DFRobot DFPlayer -A Mini MP3 Player](https://digilogelectronics.com/product/dfrobot-dfplayer-a-mini-mp3-player/): The DFRobot DFPlayer -A Mini MP3 Player is a small and low cost MP3 module with an simplified output directly to the speaker. DFRobot DFPlayer -A Mini MP3 Player can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with microcontrollers such as Arduino, ESP32, Raspberry Pi and any microcontrollers with Uart. Connection Diagram Useful Link https://mc.dfrobot.com.cn/thread-11416-1-1.html Applications Car navigation voice broadcast Road transport inspectors, toll stations voice prompts Railway station, bus safety inspection voice prompts Electricity, communications, financial business hall voice prompts Vehicle into and out of the channel verify that [...]
- [DFRobot Gravity WiFi IoT Module](https://digilogelectronics.com/product/dfrobot-gravity-wifi-iot-module/): This WiFi IoT module would be an excellent choice for IoT classroom teaching and smart home projects. It supports multiple programming platforms, such as MakeCode, Mind+, and Arduino IDE, and can also be used on various popular IoT platforms like Easy IoT, IFFTTT, ThingSpeak, SIoT. Besides that, the module is designed with an easy-to-use Gravity interface and employs UART and I2C communication protocols. You can use it to build IoT projects with other mainboards like the micro: bit, Arduino, STM32, etc. Features Support Arduino IDE programming, MakeCode, and Mind+ Graphical Programming I2C and UART Communication Support Main controller Arduino, micro: bit, etc. [...]
- [DFRobot Lipo Charger-Type C](https://digilogelectronics.com/product/dfrobot-lipo-charger-type-c-2/): This is a Type-C  Lipo charger designed for single-cell 3.7V lithium battery. The compact size makes it easy to integrate into your applications. The charger adopts TP4056X lithium battery charging IC, which guarantees you quick and safe charging, and also you can easily switch between 3 output currents (the default output current is 50mA) by selecting different bonding pads on the back. The thermal feedback inside the TP4056X can automatically adjust the charging current to limit the chip temperature under high power operation or high ambient temperature conditions. Plug this charger into power source via its Type-C port, the LED on the [...]
- [DFRobot Gravity I2C HUB](https://digilogelectronics.com/product/dfrobot-gravity-i2c-hub/): This Gravity: I2C HUB module is designed to connect up to 8 I2C devices to a main-controller, which allows you easily to hook up multiple I2C devices in project building, for instance, use Gravity-4P I2C/UART sensor cable to connect with Gravity modules or use Jumper Wire to connect with Breakout modules Useful link: For project using I2C Hub refer link  
- [DF Robot Gravity PH3 Sensor (Calibrated) – I2C & UART](https://digilogelectronics.com/product/df-robot-gravity-ph3-sensor-calibrated-i2c-uart/): DF Robot Gravity PH3 Sensor (Calibrated) – I2C & UART detects phosphine concentration and supports three output modes: analog, I2C, and UART  ( universal asynchronous receiver-transmitter, Functions of the UART: Converts parallel data into serial data for outbound communications. Converts serial data into parallel data for inbound communications. Adds a parity checking bit on outbound transmissions and checks the parity bit for inbound transmissions.). The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of phosphine in the environment which can quickly and accurately measure the concentration of oxygen in the environment. Can be widely applied to fields like [...]
- [DFRobot 5V Solar Power Manager](https://digilogelectronics.com/product/dfrobot-5v-solar-power-manager/): Solar Power Manager 5V is a small power and high-efficiency solar power management module designed for 5V solar panels. It features an MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel. The module can provide up to 900mA charging current to a 3.7V Li battery with a USB charger or solar panel. The ON/OFF controllable DC-DC converters with 5V 1A output satisfy the needs of various solar power projects and low-power applications. The module also employs various protection functions for battery, solar panel, and output, which greatly improves the stability and safety of your solar projects Application Smart [...]
- [3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module](https://digilogelectronics.com/product/3-series-40a-18650-lithium-battery-protection-board-11-1v-12-6v-with-balance-for-drill-motor-lipo-cell-module-2/): The 3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube. It provides a continuous discharge of 40A, 100mA balanced current, for electric drill/sprayer/LED lights/low power inverter.  (if the cooling environment is not good, please reduce the load current use). The Scope of Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, a polymer lithium battery) where Charging voltage can be range between 16.8V to 18.1V The board operates smoothly with Continuous charge current of (upper limit): 20A. The balanced version is [...]
- [](https://digilogelectronics.com/product/)
- [W3230 AC110-220V Digital Temperature Controller Microcomputer Thermostat Switch](https://digilogelectronics.com/product/w3230-ac110-220v-digital-temperature-controller-microcomputer-thermostat-switch/): This W3230 AC110-220V Digital Temperature Controller Microcomputer Thermostat Switch features an NTC 10K waterproof temperature sensor. When the temperature of the object reaches a certain set temperature at that time the microcomputer switches on the relay, in turn switching on the device connected to the output terminals. Applications Outdoor use uses involving potential chemical contamination or electrical interference Nuclear energy control systems, combustion systems, railroad systems, aviation systems Medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations Systems, machines, and equipment that could present a risk to life or property Domestic freezer, water tanks, [...]
- [W1209WK DC12V LED Digital Thermostat Tempeature Controller Regulator](https://digilogelectronics.com/product/w1209wk-dc12v-led-digital-thermostat-tempeature-controller-regulator/): This is a temperature-controlled thermostat that can be used to control the heating/cooling of an object with the help of the NTC sensor to detect the temperature. The module is operated by the 12VDC connected at the input terminals. The module has one output ports where you can connect the equipment to heat or cool the test system. Application Outdoor use uses involving potential chemical contamination or electrical interference Nuclear energy control systems, combustion systems, railroad systems, aviation systems Medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations Systems, machines, and equipment that could [...]
- [STC-1000 DC24V Digital Temperature Controlled Thermostat Switch](https://digilogelectronics.com/product/stc-1000-dc24v-digital-temperature-controlled-thermostat-switch/): This is a temperature-controlled thermostat switch that can be used to control the heating/cooling of an object with the help of the NTC sensor to detect the temperature. The module is operated by the 24VDC connected at the input terminals. The module has two output ports where you can connect the equipment to heat or cool the test system. Application Outdoor use uses involving potential chemical contamination or electrical interference Nuclear energy control systems, combustion systems, railroad systems, aviation systems Medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations Systems, machines, and equipment that [...]
- [XH-W3001 DC 24V 240W Digital Temperature Controller Microcomputer Thermostat Switch](https://digilogelectronics.com/product/xh-w3001-dc-24v-240w-digital-temperature-controller-microcomputer-thermostat-switch/): This is XH-W3001 DC 24V 240W Digital Temperature Controller Microcomputer Thermostat Switch. It’s a temperature measurement and Controller tool with high accuracy and precision at a very low cost. Furthermore, it offers temperature control range from -50˚C to +110˚C with a precision of ± 0.1˚C. The LED display of the switch shows the results clearly, so you can directly install or embed the XH-W3001 in the industrial control equipment panel conveniently. In addition to temperature control, it features a 1M probe made up of stainless steel material which makes it waterproof and does not let it rust easily. All the delicate and sensitive components are kept safe in ABS flame [...]
- [STC-1000 AC220V Digital Temperature Controlled Thermostat Switch](https://digilogelectronics.com/product/stc-1000-ac220v-digital-temperature-controlled-thermostat-switch/): This is a temperature-controlled thermostat switch that can be used to control the heating/cooling of an object with the help of the NTC sensor to detect the temperature. The module is operated by the 220V AC connected at the input terminals. The module has two output ports where you can connect the equipment to heat or cool the test system. Application Outdoor use uses involving potential chemical contamination or electrical interference Nuclear energy control systems, combustion systems, railroad systems, aviation systems Medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations Systems, machines, and equipment [...]
- [XH-W3001 AC 220V 1500W Digital Microcomputer Thermostat Switch](https://digilogelectronics.com/product/xh-w3001-ac-220v-1500w-digital-microcomputer-thermostat-switch/): This is XH-W3001 AC 220V 1500W Digital Temperature Controller Microcomputer Thermostat Switch. A temperature measurement and Controller tool with high accuracy and precision at a very low cost. It offers a high-temperature control precision of 0.1℃. The temperature control range from -50℃ to 110℃. The LED display shows the results clearly. One can directly install or embed the XH-W3001 in industrial control equipment panel, convenient and quick. It features a 1M probe made up of stainless steel material which makes it waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent [...]
- [STC-1000 DC12V Digital Temperature Controlled Thermostat Switch](https://digilogelectronics.com/product/stc-1000-dc12v-digital-temperature-controlled-thermostat-switch/): This is a temperature-controlled thermostat switch that can be used to control the heating/cooling of an object with the help of the NTC sensor to detect the temperature. The module is operated by the 12VDC connected at the input terminals. The module has two output ports where you can connect the equipment to heat or cool the test system. Application Outdoor use uses involving potential chemical contamination or electrical interference Nuclear energy control systems, combustion systems, railroad systems, aviation systems Medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations Systems, machines, and equipment that [...]
- [XH-W3001 DC 12V 120W Digital Microcomputer Thermostat Switch](https://digilogelectronics.com/product/xh-w3001-dc-12v-120w-digital-microcomputer-thermostat-switch/): This is an XH-W3001 DC 12V 120W Digital Microcomputer Thermostat Switch. A temperature measurement and Controller tool with high accuracy and precision at the very low cost. It offers high-temperature control precision of 0.1℃. The temperature control range from -50℃ to 110℃. It features a 1M probe made up of stainless steel material which makes is waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent and environmental protective. Button functions  Press UP to show start temperature button. On Long press of the UP button, the display starts Flashing, then press [...]
- [18650 5V 1A/2A Lithium, Battery Digital Display, Charging Module Dual, USB Output Band, Display Booster, Mmodule](https://digilogelectronics.com/product/18650-5v-1a-2a-lithium-battery-digital-display-charging-module-dual-usb-output-band-display-booster-mmodule-2/)
- [ZB2L3 18650 Li-ion Lithium Battery Capacity Tester](https://digilogelectronics.com/product/zb2l3-18650-li-ion-lithium-battery-capacity-tester-2/)
- [18650 5V 1A/2A Lithium, Battery Digital Display, Charging Module Dual, USB Output Band, Display Booster, Mmodule](https://digilogelectronics.com/product/18650-5v-1a-2a-lithium-battery-digital-display-charging-module-dual-usb-output-band-display-booster-mmodule/): Do you want to build your own power bank from your spare 18650 battery cells?  Then this 18650 5V 1A/2A Lithium Battery Digital Display Charging Module is for you. Just like a modern power bank the module is equipped with Dual USB output to charge the gadgets at 2.1A and 1A. To charge the batteries, this module has one MicroUSB input. Onboard, a brilliant blue-colored illuminating LED Display displays the real-time battery percentage in the 0–100% range, as well as the IN and OUT signals. Furthermore, the board contains a connection for installing an LED to be used as a flashlight, [...]
- [18650 Li-ion Lithium Lead-acid Battery Capacity Meter Discharge Tester](https://digilogelectronics.com/product/18650-li-ion-lithium-lead-acid-battery-capacity-meter-discharge-tester/): Features Support current through: maximum 3.000A resolution 0.001A Maximum voltage measurement error: 1% + 0.02V Maximum current measurement error: 1.2%+-0.002A The highest battery capacity range: 9999Ah (1Ah=1000mAh). The larger value is switched by the decimal point shift. When it is lower than 10Ah, it is displayed as X.XXX, and when it is above 10Ah, it is displayed as XX.XX, and so on. Board size: 50mmX37mm Finished product size: 50mmX37mmX17mm (length X width X height maximum position size, including copper foot height) Board and accessories weight: single-board 28g (including copper column), two 5W ceramic resistor 9g, 50W resistance about 27g (including line) [...]
- [PCB BMS 6 Series 22V 18650 Lithium Battery Protection Board](https://digilogelectronics.com/product/pcb-bms-6-series-22v-18650-lithium-battery-protection-board/): PCB BMS 6 Series 22V 18650 Lithium Battery Protection Board is a 6 string 22V circuit power tools mostly used for solar lighting, for dedicated 18650 battery packs.  It is designed for 3.7V 18650 models lithium batteries for charging, Protection from overcharge and over-discharge. Battery protection board, as the name suggests battery protection board is mainly rechargeable (Refers to the lithium battery) and protects the integrated circuit board. Lithium battery (rechargeable type) so need protection, is determined by its own characteristics. As the lithium battery, its material determines itself can not be overcharge, over-discharge, overcurrent, short circuit, and ultra-high temperature charge [...]
- [ZB2L3 18650 Li-ion Lithium Battery Capacity Tester](https://digilogelectronics.com/product/zb2l3-18650-li-ion-lithium-battery-capacity-tester/): This is ZB2L3 18650 Li-ion Lithium Battery Capacity Tester board, which can measure the capacity of the fully charged battery connected at its inputs it also has 1W resistors that can be used to discharge the battery at the constant current output. After the capacity test has been completed the capacity of the battery is displayed on the 4 digits 7 segment display, which can also display the current supplied by the batter as well as the battery voltage. Instruction: 1. The first test should be a fully charged battery. 2. Connect the battery to be tested positive to positive input, [...]
- [1-8S Lipo Battery Voltage Tester](https://digilogelectronics.com/product/1-8s-lipo-battery-voltage-tester/): The 1-8S Lipo Battery Voltage Tester with Buzzer is a quality product available and a special design to measure and display the voltage of LiPo battery packs. This voltage checker can measure the voltage of the battery pack as well as the voltage of every single cell of the battery pack. This unit also features a handy built-in LED display that will show the voltage of each cell followed by the overall voltage of the pack. Don’t risk your model by flying on depleted batteries, at this price piece of mind flying can’t be any cheaper! Simply connect the battery balance plug to the [...]
- [PCB BMS 6 Series 22V 18650 Lithium Battery Protection Board](https://digilogelectronics.com/product/pcb-bms-6-series-22v-18650-lithium-battery-protection-board-2/): PCB BMS 6 Series 22V 18650 Lithium Battery Protection Board is a 6 string 22V circuit power tools mostly used for solar lighting, for dedicated 18650 battery packs.  It is designed for 3.7V 18650 models lithium batteries for charging, Protection from overcharge and over-discharge. Battery protection board, as the name suggests battery protection board is mainly rechargeable (Refers to the lithium battery) and protects the integrated circuit board. Lithium battery (rechargeable type) so need protection, is determined by its own characteristics. As the lithium battery, its material determines itself can not be overcharge, over-discharge, overcurrent, short circuit, and ultra-high temperature charge [...]
- [4S High Current up to 30A Lithium Battery Protection Board Four Series of 14.8V 16.8V](https://digilogelectronics.com/product/4s-high-current-up-to-30a-lithium-battery-protection-board-four-series-of-14-8v-16-8v/): The 4 Series 14.8V 18650 Lithium Battery Equalization Board is suitable for the lithium battery pack with no equalization charge and the charging balance is balanced Make each battery in the battery pack full of electricity at the same time. This new 4 string lithium battery protection board is suitable for the nominal voltage 14.4V lithium battery pack, 14.8V lithium battery pack, 16.8V lithium battery pack. With automatic activation, protection conditions automatically restored after the restoration of protection, no charger activation, the use of more convenient. The protection board can be modified according to your requirements voltage, current, and other parameters. Features [...]
- [5S 15A 18650 Lithium Battery Protection Board](https://digilogelectronics.com/product/5s-15a-18650-lithium-battery-protection-board/): 5S 15A 18650 Lithium Battery Protection Board is designed to monitor the status of batteries, control the process of charging/discharging the battery etc. Five batteries (18650) can be connected simultaneously to this charge-discharge controller module. The module has protection against short circuit, overcharge and over-discharge. One of the functions of the charge controller is to turn off the power supply for the batteries when the maximum capacity of at least one battery is reached. This BMS controller is designed for more than 30,000 hours of operation. The maximum allowable current is 25 A. If the maximum permissible value of the supply voltage is exceeded, the [...]
- [4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module](https://digilogelectronics.com/product/4-series-40a-18650-lithium-battery-protection-board-14-8v-16-8v-with-balance-for-drill-motor-lipo-cell-module/)
- [4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable](https://digilogelectronics.com/product/4-series-30a-18650-lithium-battery-protection-board-14-8v-16v-with-cable/): 4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable, a Balance Board for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube. It provides continuous discharge of 30A, Balanced current, for electric drill/sprayer/LED lights/low power inverter.  (if the cooling environment is not good, please reduce the load current use) The Scope of Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, a polymer lithium battery) where Charging voltage can be range between 16.8V to 18.1V The board operates smoothly with Continuous charge current of (upper limit): 20A. The balanced version is [...]
- [4S 20A 18650 Lithium Battery Protection Board](https://digilogelectronics.com/product/4s-20a-18650-lithium-battery-protection-board/): The 4S 14.8V 20A Lithium battery Protection Board comes with over-charge, over-discharge, over-current and short circuit protection, for a variety of various shapes 3.7V lithium-Ion batteries. HXYP-4S-BMD1 is Small size square shape board under which four 18650 cells can be packed suitable for many requirements of high integration, low cost of the occasion, to meet a wide range of performance requirements to ensure that the battery pack is absolutely safe and reliable. This BMS (Battery Management System) – a battery management system that is designed to monitor the status of batteries, control the battery charge/discharge process, etc.  Four 18650 batteries can be [...]
- [W3230 DC24V Digital Temperature Controller Microcomputer Thermostat Switch](https://digilogelectronics.com/product/w3230-dc24v-digital-temperature-controller-microcomputer-thermostat-switch/): This W3230 Digital Temperature Controller Microcomputer Thermostat Switch features an NTC 10K waterproof temperature sensor. When the temperature of the object reaches a certain set temperature at that time the microcomputer switches on the relay, inturn switching on the device connected to the output terminals. Applications Outdoor use uses involving potential chemical contamination or electrical interference Nuclear energy control systems, combustion systems, railroad systems, aviation systems Medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations Systems, machines, and equipment that could present a risk to life or property Domestic freezer, water tanks, refrigerator, industrial [...]
- [FY-12 Mini LCD Digital Thermometer ,Hygrometer](https://digilogelectronics.com/product/fy-12-mini-lcd-digital-thermometer-hygrometer/): This is a Digital thermometer and hygrometer. This meter can be used to measure temperature and humidity. The meter comes with a sensor with an extended wire Features This is a mini digital thermometer hygrometer. Multifunctional can measure temperature and humidity. Large LED display, easy to read. High accuracy,large range -50 ~70° C,10% RH ~ 99% RH. With reverse wiring protection.  
- [W3230 DC12V Digital Temperature Controller Microcomputer Thermostat Switch](https://digilogelectronics.com/product/w3230-dc12v-digital-temperature-controller-microcomputer-thermostat-switch-2/): This W3230 Digital Temperature Controller Microcomputer Thermostat Switch features an NTC 10K waterproof temperature sensor. When the temperature of the object reaches a certain set temperature at that time the microcomputer switches on the relay, inturn switching on the device connected to the output terminals. Applications Outdoor use uses involving potential chemical contamination or electrical interference Nuclear energy control systems, combustion systems, railroad systems, aviation systems Medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations Systems, machines, and equipment that could present a risk to life or property Domestic freezer, water tanks, refrigerator, industrial [...]
- [3S 15A 18650 Lithium Battery Protection Board](https://digilogelectronics.com/product/3s-15a-18650-lithium-battery-protection-board/): Battery protection board, as the name suggests battery protection board is mainly rechargeable (Refers to the lithium battery) and protects the integrated circuit board. As the lithium battery, its material determines itself can not be overcharge, over-discharge, overcurrent, short circuit, and ultra-high temperature charge and discharge, so lithium battery lithium components will always follow A protective plate with sampling resistor, and a current fuse. Providing all above features this 3S BMS board can combine 3 x 18650 battery to form a battery pack to provide up to 15V DC output at 15A current which can be used for heavy applications. RNSbot provides [...]
- [3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection board-Good Quality](https://digilogelectronics.com/product/3s-11-1v-10a-18650-lithium-battery-overcharge-and-over-current-protection-board-good-quality/): 3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection board-Good Quality ensures the security of battery pack. This battery management system design and Suitable for: 10.8V (Rated voltage of polymer battery) 11.1V (18650 or 3.7V lithium battery rated voltage) 12.6V (Lithium battery full charge voltage) Note: Please allow 1-3mm errors due to manual measurement. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same Also, Note down and take care of following things while using 3S 11.1V 18650 Lithium battery protection board 12V 10A Overcharge And Overcurrent protection. Higher than [...]
- [3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection board-Good Quality](https://digilogelectronics.com/product/)
- [3S 12V 25A 18650 Lithium Battery Protection Board](https://digilogelectronics.com/product/3s-12v-25a-18650-lithium-battery-protection-board/): This is 3S 12V 25A 18650 Lithium Battery Protection Board 11.1V 12.6V High Current With Balanced Circuit Over Charge Over-Discharge Over Current And Short Circuit Protection Function. Board charging and discharging are the same port, the board includes the balanced circuit. When the charge balance, the board will be a bit warm, even after disconnecting the charger, some are still in the balance, will continue to warm for a while until below the equilibrium break threshold. The protection board cannot be used for iron lithium polymer battery (for other batteries, no matter what material, as long as the overvoltage and put [...]
- [3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module](https://digilogelectronics.com/product/3-series-40a-18650-lithium-battery-protection-board-11-1v-12-6v-with-balance-for-drill-motor-lipo-cell-module-3/): The 3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube. It provides a continuous discharge of 40A, 100mA balanced current, for electric drill/sprayer/LED lights/low power inverter.  (if the cooling environment is not good, please reduce the load current use). The Scope of Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, a polymer lithium battery) where Charging voltage can be range between 16.8V to 18.1V The board operates smoothly with Continuous charge current of (upper limit): 20A. The balanced version is [...]
- [HX-2S-A2 Circular 2S 8.4V BMS 18650 Lithium Battery Protection Plate](https://digilogelectronics.com/product/hx-2s-a2-circular-2s-8-4v-bms-18650-lithium-battery-protection-plate/): This is an HX-2S-A2 Circular 2S 8.4V BMS 18650 Lithium Battery Protection Plate With short circuit protection, overload, discharge and overcharge protection.  Due to its small size, excellent performance and low cost, the product is suitable to meet a wide range of requirements. Note: The battery will heat when using it, it means the battery does not apply, please don’t keep using because the battery will be damaged soon. The protection board cannot be used for lithium iron phosphate battery, hernia lamp, hand drill battery pack, electric fish machine battery pack, electric bicycle battery pack, children’s car battery, 775 (4A)motor, 1W fish eye [...]
- [2S 10A 18650 7.4V-8.4V Lithium Battery Protection Board](https://digilogelectronics.com/product/2s-10a-18650-7-4v-8-4v-lithium-battery-protection-board/): 2S 10A Li-ion Lithium Battery 7.4V 8.4V 18650 Charger Protection Board Module is a small PCB mounted Li-ion Lithium Battery charger protection module. This small and smart battery charger protection module comes with various features like Short circuit protection, Overcharge protection, Over-discharge protection, Overcurrent protection. It is very easy to install and convenient to use in all your DIY portable projects. Note: This module comes in two different colours Green and Blue. We will ship it randomly according to the availability. Connection Diagram: P+/P- input/output interface, the same combination when the battery voltage, capacity, internal resistance should be matched well, battery voltage around the rated [...]
- [2S 10A 18650 7.4V-8.4V Lithium Battery Protection Board](https://digilogelectronics.com/product/2s-10a-18650-7-4v-8-4v-lithium-battery-protection-board-2/): 2S 10A Li-ion Lithium Battery 7.4V 8.4V 18650 Charger Protection Board Module is a small PCB mounted Li-ion Lithium Battery charger protection module. This small and smart battery charger protection module comes with various features like Short circuit protection, Overcharge protection, Over-discharge protection, Overcurrent protection. It is very easy to install and convenient to use in all your DIY portable projects. Note: This module comes in two different colours Green and Blue. We will ship it randomly according to the availability. Connection Diagram: P+/P- input/output interface, the same combination when the battery voltage, capacity, internal resistance should be matched well, battery voltage around the rated [...]
- [1S 18650 Li-ion Lithium Battery BMS Charger Protection Board for 3.7V Battery.](https://digilogelectronics.com/product/1s-18650-li-ion-lithium-battery-bms-charger-protection-board-for-3-7v-battery/): This is 1S 18650 Li-ion Lithium Battery BMS Charger Protection Board for 3.7V Battery. Protections Short circuit protection Overcharge protection Over-discharge protection Over-current protection Pins description: P-: negative of input or output power P+: positive of input or output power B-: negative of the battery B+: positive of the battery Features  High accuracy voltage detection circuit; Using high voltage device charging terminal; The built-in three-stage overcurrent detection circuit (overcurrent 1, overcurrent 2, load short circuit); The battery charge and discharge can control the MOS transistor;  
- [Testing lead wire pair with Crocodile Clips (Red+Black)-1Meter](https://digilogelectronics.com/product/testing-lead-wire-pair-with-crocodile-clips-redblack-1meter/): This testing leads pair with Crocodile Clip end is multipurpose testing probes. It can be used for multimeters, testers, power supplies and used in all electronic applications such as electric testing work, circuits, assemblies and so on. Features Good Quality Cable Silicon Insulated cover Corrosion-free nickel-plated Crocodile Clips  
- [4 x 1.5V AAA battery holder with cover and On/Off Switch](https://digilogelectronics.com/product/4-x-1-5v-aaa-battery-holder-with-cover-and-on-off-switch/): The Plastic Covered AAA x 4 battery holder with cover and on/off switch for 4 x AAA Battery with On/Off Switch puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small head screw. 4 x AAA 3V batteries make a series connection inside the case to provide 3V combine output. Fully packed cover with locking provides the protection to the battery cell from environmental effects. Another bonus is the ON/OFF switch which can be used to control power to your project. The leads are about 15cm, and the [...]
- [6 x 1.5V AA Battery Holder Without Cover](https://digilogelectronics.com/product/6-x-1-5v-aa-battery-holder-without-cover/): This 6 x 1.5V AA Battery Holder can hold 6  1.5VAA battery which can make  9 V rechargeable battery pack from NiMH / NiCd cells or 9V battery pack from alkaline cells. The battery holder puts the batteries in series so that you have 6x the voltage of an AA battery. (approx. 9V) It comes with a soldered open end wire. Specifications and Features Cell Quantity: 6 Battery type: AA Storage temperature: 25ºC Max Operate temperature: 80ºC Wire Length: 120 mm Distance between mounting holes: 76mm Mounting holes diameter: 3mm Color: Black  
- [4 x 1.5V AAA Battery Holder Without Cover](https://digilogelectronics.com/product/4-x-1-5v-aaa-battery-holder-without-cover/): This 4 x 1.5V AAA Battery Holder can hold 4  1.5V AAA battery which can make  6 V rechargeable battery pack from NiMH / NiCd cells or 6 V battery pack from alkaline cells or it can also be used for one-time use and throw batteries for small DIY projects. The battery holder puts the batteries in series so that you have 4x the voltage of an AAA battery. (approx. 6V) It comes with a soldered open end wire. Note: This product does not include any kind of battery. Features Battery type: AAA Wire Length: 120 mm Mounting holes diameter: 3mm. Metal [...]
- [18650 SMD/SMT High-Quality Single Battery Holder](https://digilogelectronics.com/product/18650-smd-smt-high-quality-single-battery-holder/): The all-new 18650 SMD/SMT High-Quality Single Battery Holder is made to handle the higher lithium battery supply voltage with a long service life. With the compact size SMD pins, you can mount the holder on your project PCB and power your project without any loose wiring. It has High-quality ABS external / PC material, insert material is bronze pin environmental protection material. The ABS plastic can handle bearable heat which normal plastic can’t and Stainless steel shrapnel screens will hold the batteries, the installation is very convenient to replace the battery, it will not damage the battery and other parts, convenient and fast, [...]
- [2 x 1.5V AAA Battery Holder Without Cover-2Pcs.](https://digilogelectronics.com/product/2-x-1-5v-aaa-battery-holder-without-cover-2pcs/): This 2 x 1.5V AAA Battery Holder can hold 2  1.5V AAA battery which can make  3.0 V rechargeable battery pack from NiMH / NiCd cells or 3V battery pack from alkaline cells or it can also be used for one-time use and throw batteries for small DIY projects. The battery holder puts the batteries in series so that you have 2x the voltage of an AAA battery. (approx. 3.0V) It comes with a soldered open end wire. Note: This product does not include a battery, you need to purchase it separately. Features Battery type: AAA. Wire Length: 120 mm. Mounting holes [...]
- [9V Battery Holder with DC Jack](https://digilogelectronics.com/product/9v-battery-holder-with-dc-jack/): This 9V battery holder allows your battery to snap in tight and holds it in place, which is great in situations where you don’t want the battery just hanging. It also has three mounting holes so you can attach it securely to your enclosure. It is terminated with a standard 5.5 x 2.1 mm, centre-positive barrel jack. The holders are moulded in Delrin with corrosive resistant nickel plated springs and studs. A PP3 battery holder moulded in black thermoplastic with DC JACK. Can be screwed to a base for the most secure mounting. Good Quality Material. Colour: Black. Nickel-Plated Contact Point. [...]
- [18650 Dual SMD/SMT High-Quality Single Battery Holder](https://digilogelectronics.com/product/18650-dual-smd-smt-high-quality-single-battery-holder/): The all-new 18650 Dual SMD/SMT High-Quality DUAL Battery Holder is made to handle the higher lithium battery supply voltage with a long service life. With the compact size SMD pins, you can mount the holder on your project PCB and power your project without any loose wiring. This Holder can hold two 18650 cylinders shaped cell to provide separate supply from both cells as slot are not interconnected, It means that the holder can be taken in use as a SINGLE battery Holder also. Additionally, you can easily combine two battery power by doing a series or parallel combination connection simply by soldering the contact points of the Holder from outside as [...]
- [4 x AA Battery Holder Box with 9V Battery Buckle without Cover （Back-to-Back）](https://digilogelectronics.com/product/4-x-aa-battery-holder-box-with-9v-battery-buckle-without-cover-%ef%bc%88back-to-back%ef%bc%89/): 4 x AA Battery Back To Back Holder Case Box(Pack of 2) is a holder with wires, suitable for 4 x AA batteries With spring clip design, you can easily put the battery in it having Wire Length of Approx. 140 mm Features Color: Black Voltage: 9V lightweight Convenient to carry this battery box holder with wires Weight: About 10g Wire Length: Approx 6cm Size: Approx mm (LxWxH):54 X 31 X 29mm  
- [2 x AA Battery EL Wire Light Battery Controller Driver for 1-5M Neon Light Strip](https://digilogelectronics.com/product/2-x-aa-battery-el-wire-light-battery-controller-driver-for-1-5m-neon-light-strip/): This 2x AA battery switched battery holder comes to compete with a terminal connector on the end of the wires. These are perfect for connecting LEDs without the need for soldering. The batteries are fully enclosed in the plastic case, which is secured in place by a small screw. The unit incorporates a small on / off switch. The leads are approximately 130mm in length and the color red and black to show the polarity of the connector. Note: Buy AA Cell Seperately  Features Battery Holder with 2-pin JST connector It has an On/Off Button on board Color: Black 2 AA  [...]
- [6 x AA Battery Holder Box (Back-to-Back) Without Cover](https://digilogelectronics.com/product/6-x-aa-battery-holder-box-back-to-back-without-cover/): This is a 6 x AA Battery Holder Box (Back-to-Back) Without Cover The case box can keep your batteries organized and protected. The holder case is designed with leads for easy to solder and connect. This battery holder case is perfect for the devices that need a 6 V external battery. Features  Holds four AA batteries. Easy install, convenient to use. High-quality plastic material. The perfect external power source for a single-chip microcomputer system, Arduino system, 2WD mobile robot, track-seeking car, RP5 tracked vehicle.  
- [18650 x 3 BLM Cell Box, With Pin, Without Cover](https://digilogelectronics.com/product/18650-x-3-blm-cell-box-with-pin-without-cover/): This is a Black Plastic Storage Box Case Holder for Battery 18650 x 3 Cell Box, without Cover. The case box can keep your batteries organized and protected. The holder case is designed with leads for easy to solder and connect. This  battery holder case is perfect for the devices need an 11.1V external battery. This Battery Holder is compatible with 18650 Li-ION batteries which you need to buy separately. Features Easy install, convenient to use Battery Holder is compatible with 18650 Li-ION batteries  
- [2 x 1.5V AA Battery Holder Without Cover](https://digilogelectronics.com/product/2-x-1-5v-aa-battery-holder-without-cover/): This 2 x 1.5V AA Battery Holder can hold 2  1.5VAA battery which can make  3.0 V rechargeable battery pack from NiMH / NiCd cells or 9V battery pack from alkaline cells or it can also be used for one-time use and throw batteries for small DIY projects. The battery holder puts the batteries in series so that you have 2x the voltage of an AA battery. (approx. 3.0V) It comes with a soldered open end wire. Note: This product does not include a battery, you need to purchase it separately. Features Cell Quantity: 2. Battery type: AA. Storage temperature: 25ºC. Max [...]
- [3 x 1.5V AA Battery Holder Without Cover](https://digilogelectronics.com/product/3-x-1-5v-aa-battery-holder-without-cover/): This 3 x 1.5V AA Battery Holder can hold 3  1.5V AA battery which can make  4.5 V rechargeable battery pack from NiMH / NiCd cells or 9V battery pack from alkaline cells or it can also be used for one-time use and throw batteries for small DIY projects. The battery holder puts the batteries in series so that you have 3x the voltage of an AA battery. (approx. 4.5V) It comes with a soldered open end wire. Note: This product does not include a battery, you need to purchase it separately. Specifications and Features Cell Quantity: 3. Battery type: AA. Storage [...]
- [Black CR2032-BS-8, Button Battery Patch, Holder, Golden Foot](https://digilogelectronics.com/product/black-cr2032-bs-8-button-battery-patch-holder-golden-foot/): This is a Black CR2032-BS-8 Button Battery Patch Holder Holder Case Box. This Gear foot is used to hold the battery. Features Easy to install. Lightweight, convenient to carry. Be used as a perfect external power source.  
- [NEO-7M-000 NEO-7M GPS Module MWC GY-NEO 7M V2 Flight Control GPS Module EEPROM MWC APM2.5](https://digilogelectronics.com/product/neo-7m-000-neo-7m-gps-module-mwc-gy-neo-7m-v2-flight-control-gps-module-eeprom-mwc-apm2-5/): The NEO-7M-000 GPS Module is a compact and versatile navigation device designed for MultiWiiCopter (MWC) and APM2.5 flight control systems. Featuring an EEPROM for storing configuration data, the GY-NEO 7M V2 offers precise positioning and navigation capabilities. Its compatibility with MWC and APM2.5 makes it an ideal choice for drone and UAV applications. Features  Module with a ceramic active antenna. With data backup battery. LED signal indicator. Compatible with various flight controller module EEPROM saves the configuration parameter data when power-down. Module with ceramic destined antenna, signal super quality Immersion Gold PCB  
- [PN532 NFC RFID Read / Write Module V3 Kit](https://digilogelectronics.com/product/pn532-nfc-rfid-read-write-module-v3-kit-2/): The PN532 is a highly integrated transmission module for contactless communication at 13.56 MHz including microcontroller functionality based on an 80C51 core with 40 Kbytes of ROM and 1 Kbytes of RAM. The PN532 combines a modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at 13.56 MHz with an easy-to-use firmware for the different supported modes and the required host controller interfaces. It works as RFID reader/writer,1443-A card or a virtual card and also supports NFC with Android phone. It is also compatible with Arduino. Note : HW-147 on board working remains same . [...]
- [Black Plastic Storage Box Case Holder For Battery 3 x 18650 Cell Box, Without Cover](https://digilogelectronics.com/product/black-plastic-storage-box-case-holder-for-battery-3-x-18650-cell-box-without-cover/): This is a Black Plastic Storage Box Case Holder for Battery 3 x 18650 Cell Box, without Cover. The case box can keep your batteries organized and protected. The holder case is designed with leads for easy to solder and connect. This battery holder case is perfect for the devices need an 11.1V external battery. This Battery Holder is compatible with our 18650 Li-ION Batteries which you need to buy separately. Features  Holds three 18650 batteries. Easy install, convenient to use. High-quality plastic material.  
- [18650 x 2 battery holder with cover and On/Off Switch](https://digilogelectronics.com/product/18650-x-2-battery-holder-with-cover-and-on-off-switch/): The Plastic Covered 18650 x 2 battery holder with cover and On/Off Switch for 2 x 18650 Battery with On/Off Switch puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small head screw. 2 x 18650 3.7V batteries make a series connection inside the case to provide 7.4V combine output. Fully packed cover with locking provides the protection to the battery cell from environmental effects. Another bonus is the ON/OFF switch which can be used to control power to your project. The leads are about 15cm, and the [...]
- [RFID 13.56MHz Card-5Pcs](https://digilogelectronics.com/product/rfid-13-56mhz-card-5pcs/): This is RFID 13.56MHz Card used for Contactless transmission of data and supplies energy with no battery needed. Its Operating distance is Up to 1 Meter depending on antenna geometry. Operating frequency is  13.56MHz and Data transfer speed is 106 kbit/s. It is featured with Data integrity of 16 Bit CRC, parity, bit coding bit counting which allows Anti collision. These cards are typically used in ticketing transaction: <100 ms including backup management. Applications  Public transportation Access control Event Ticketing Gaming & identity Features Contactless transmission of data and supply energy (no battery needed) Anticollision EEPROM 1Kbit, organized in 16 sectors, each [...]
- [RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag](https://digilogelectronics.com/product/rfid-reader-writer-rc522-spi-s50-with-rfid-card-and-tag/): Do you want to know the work of RFID Reader/Writer RC522 SPI S50 CARD AND KEYCHAIN, then this Product is best for you . With this Product, you can detect radio waves produced by a reader to detect the presence of (then read the data stored on) an RFID tag This is RFID Reader/Writer RC522 SPI S50 CARD AND KEYCHAIN which works on non-contact 13.56mhz communication, is designed by NXP as low power consumption, low cost, and compact size read and write chip, is the best choice in the development of smart meters and portable hand-held devices. It uses an advanced modulation system, fully [...]
- [Black Plastic Storage Box Case Holder For Battery 1 x 18650 Cell Box -2pcs](https://digilogelectronics.com/product/black-plastic-storage-box-case-holder-for-battery-1-x-18650-cell-box-2pcs/): This is a Black Plastic Storage Box Case Holder for Battery 1 x 18650 Cell Box, without Cover. The case box can keep your batteries organized and protected. The holder case is designed with leads for easy to solder and connect. This battery holder case is perfect for the devices that need a 3.7V external battery. This Battery Holder is compatible with our 18650 Li-ION Batteries which you need to buy separately. Features  Holds a single 18650 batteries. Easy install, convenient to use. High-quality plastic material.  
- [18650 x 2 battery holder with cover and On/Off Switch](https://digilogelectronics.com/product/18650-x-2-battery-holder-with-cover-and-on-off-switch-2/): The Plastic Covered 18650 x 2 battery holder with cover and On/Off Switch for 2 x 18650 Battery with On/Off Switch puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small head screw. 2 x 18650 3.7V batteries make a series connection inside the case to provide 7.4V combine output. Fully packed cover with locking provides the protection to the battery cell from environmental effects. Another bonus is the ON/OFF switch which can be used to control power to your project. The leads are about 15cm, and the [...]
- [XY-CD60L Solar Battery Charger Controller Module DC6-60V Charging Discharge Control Low Voltage Current Protection Board](https://digilogelectronics.com/product/xy-cd60l-solar-battery-charger-controller-module-dc6-60v-charging-discharge-control-low-voltage-current-protection-board/): The XY-CD60L Solar Battery Charger Controller is a device designed for charging and regulating batteries using solar power. It is a microcontroller-based intelligent control system that features high-precision temperature compensation and provides protection against overcharging, over-discharging, short circuits, and reverse polarity. This controller is ideal for use in solar-powered lighting systems, off-grid solar power systems, and other solar-powered projects. This type of module is commonly used in solar power setups, including solar panels, batteries, and other components, to efficiently manage the charging and discharging of batteries, maximizing their lifespan and ensuring the system’s overall safety and efficiency. Note: The actual product may [...]
- [HOT DD30CRTA Car, Lead Acid Battery, Charger 12V Charging, Device 3A Current 1-, 10000AH UPS Solar, Power Module, （With Terminal）](https://digilogelectronics.com/product/hot-dd30crta-car-lead-acid-battery-charger-12v-charging-device-3a-current-1-10000ah-ups-solar-power-module-%ef%bc%88with-terminal%ef%bc%89/): This is HOT DD30CRTA Lead Acid Battery Charger 12V Charging Device 3A. The DD30CRTA is a PWM switch-mode battery charger controller for a 12V lead-acid battery in a small package using a few external components. The DD30CRTA is specially designed for charging 12V lead-acid battery with trickle charge, constant current charge, over-charge and float charge mode. In over-charge and float charge mode, the regulation voltage is internally set. The constant charge current is programmable with a single sense resistor.  Deeply discharged batteries are automatically trickle charged at 17.5% of the programmed constant charge current until the cell voltage exceeds 75% of [...]
- [3S 10A Li-ion 18650 Charger Protection Board Module 10.8V 11.1V 12.6V](https://digilogelectronics.com/product/3s-10a-li-ion-18650-charger-protection-board-module-10-8v-11-1v-12-6v/): The 3 Series 6A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube. It provides a continuous discharge of 6A, 100mA balanced current, for electric drill/sprayer/LED lights/low power inverter.  (if the cooling environment is not good, please reduce the load current use) The Scope of Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, a polymer lithium battery) where Charging voltage can be range between 16.8V to 18.1V The board operates smoothly with Continuous charge current of (upper limit): 6A. The balanced version is [...]
- [XH-M609 DC 12V-36V Charger Module Voltage Over Discharge Lithium Battery Protection Board](https://digilogelectronics.com/product/xh-m609-dc-12v-36v-charger-module-voltage-over-discharge-lithium-battery-protection-board/): XH-M609 DC 12V-36V Charger Module Voltage Over Discharge Lithium Battery Protection Board digital battery over-discharge protection switch is specially designed for 12-36V lithium and lead-acid batteries. This is a low voltage protection module that comes with an on-board momentary push button to set the low voltage disconnect parameter, when the battery voltage reaches the setting values, the module will disconnect the load automatically to avoid the battery from over-discharging to prolong the battery lifetime. Features  Automatic control circuit connection  Automatic charging and power off  Real-time voltage monitor  Autosave setting Discharge protection. Prolong battery life.  
- [XH-M240 Battery Capacity and Discharge Energy Testing Meter For 18650 Lithium-Ion Battery](https://digilogelectronics.com/product/xh-m240-battery-capacity-and-discharge-energy-testing-meter-for-18650-lithium-ion-battery/): This battery capacity tester is used to test the voltage, discharge capacity, and discharge energy of a 18650 lithium battery. With a dual working power supply, it has high working efficiency and saves your time. It can display discharge capacity and discharge energy. And it supports a parameter memory function, convenient for checking next time. Note: Battery is not included with this product. Features Made of high-quality electronic components Solid, durable, good conductivity and performance Long service life  
- [TP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Mini USB](https://digilogelectronics.com/product/tp4056-1a-li-ion-lithium-battery-charging-module-with-current-protection-mini-usb/): This TP4056 1A Li-ion Lithium Battery Charging Module with Current Protection – Mini USB is a tiny module, perfect for charging single cell 3.7V 1 Ah or higher lithium ion (Li-Ion) cells such as 16550s that don’t have their own protection circuit. Based on the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished. Furthermore, when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage – and also protects against over-voltage and reverse [...]
- [70CM 4 Pin Female to Female Dupont Cable For 3D Printer – 2Pcs](https://digilogelectronics.com/product/70cm-4-pin-female-to-female-dupont-cable-for-3d-printer-2pcs/): This is 70CM 4 Pin Female to Female Dupont Cable For 3D Printer. A wire jumper wire generally refers to a film made to schedule a connection between two points in an electrical circuit. You can use a jumper wire to modify the circuit or to detect any complications in the circuit. These versatile jumper cables can be used for any of your special electronics projects for your brick. These modules are 70 cm long jumpers. These jumpers can be used in any of your electronic items. Such as 3D printers, Arduino boards, modules.  
- [Adapter Connector Cable DC Plug 5.5×2.1mm Male To 5.5×2.1mm Male Adapter Connector Cable 1M](https://digilogelectronics.com/product/adapter-connector-cable-dc-plug-5-5x2-1mm-male-to-5-5x2-1mm-male-adapter-connector-cable-1m/): This is an Adapter Connector Cable DC Plug 5.5×2.1mm Male To 5.5×2.1mm Male Adapter Connector Cable 1M with features as below. Features Great for short distance connection Simply & Professional appearance for cabling Easier for installation save time and money Easy to use Perfect for CCTV security camera application in home or office
- [SMPS Power Adaptor – 12V/2A (Power supply)](https://digilogelectronics.com/product/smps-power-adaptor-12v-2a-power-supply/): The SMPS Power Adaptor – 12V/2A (Power supply) is a Switched mode power supply (SMPS). This is the advanced power supply and better than conventional ones. If you want low losses and stable output also you don’t want to make a rectifier, so go for SMPS. You can use this SMPS Power Adaptor – 12V/2A to power-up the Arduino UNO/Arduino MEGA, DC motors, LCD screens, DVD players, Hard Drives, Audio Gear, and most other digital devices use less than 2 Amperage. This is a high-quality AC to DC Switching Power Adapter which gives a clean regulated 12VDC output at up to 2A. These adapter work with 240VAC input, [...]
- [70cm 2 Pin Female to Female Dupont Cable For 3D Printer – 2Pcs](https://digilogelectronics.com/product/70cm-2-pin-female-to-female-dupont-cable-for-3d-printer-2pcs/): This is 70CM 2 Pin Female to Female Dupont Cable For 3D Printer. A wire jumper wire generally refers to a film made to schedule a connection between two points in an electrical circuit. You can use a jumper wire to modify the circuit or to detect any complications in the circuit. These versatile jumper cables can be used for any of your special electronics projects for your brick. These modules are 70 cm long jumpers. These jumpers can be used in any of your electronic items. Such as 3D printers, Arduino boards, modules. Features  High quality and in good working condition [...]
- [Male to Male Jumper Wires 40 Pin 40cm](https://digilogelectronics.com/product/male-to-male-jumper-wires-40-pin-40cm/): This is male to male Dupont/Jumper Wire 40 Pin 40cm. A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has 1Pin male to the 1pin male header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their “end connectors” into [...]
- [Male to Male Jumper Wires 40 Pin 30cm](https://digilogelectronics.com/product/male-to-male-jumper-wires-40-pin-30cm/): This is male to male Dupont/Jumper Wire 40 Pin 30cm. A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has 1Pin male to the 1pin male header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their “end connectors” into [...]
- [Male to Female Jumper Wires 40 Pin 40cm](https://digilogelectronics.com/product/male-to-female-jumper-wires-40-pin-40cm/): This is Male to Female Jumper Wires 40 Pin 34s compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their “end connectors” into the slots provided in a breadboard, the header connector of a circuit board, or a piece of test equipment. Mostly it is useful with Orange Pi, Banana Pi, Raspberry Pi, Arduino, and other [...]
- [Male to Female Jumper Wires 40 Pin 30cm](https://digilogelectronics.com/product/male-to-female-jumper-wires-40-pin-30cm/):   This is Male to Female Jumper Wires 40 Pin 30cm. A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has 1Pin male to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their “end connectors” [...]
- [Female to Female DuPont Line 40 Pin 30cm](https://digilogelectronics.com/product/female-to-female-dupont-line-40-pin-30cm-2/): This is Female to Female Dupont Line 40 Pin 30cm. A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has 1Pin female to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers. This cable is an electrical wire or group of them in a cable with a connector or pins at each end, which is normally for interconnecting the components of a breadboard or other prototype or test circuit, internally or with other equipment or components, without soldering. Individual Dupont Cables are fitted by inserting their “end connectors” into [...]
- [USB 2.0 A-A Male Cable 0.3m](https://digilogelectronics.com/product/usb-2-0-a-a-male-cable-0-3m/): This USB 2.0 A-A Male Cable (0.3m start to endpoint length) cable allows simple “plug & play” connections for devices such as printers, keyboards/mice, digital cameras and other USB peripherals. The USB 2.0 cable has a higher maximum signaling rate of 480 Mbit/s (60 MB/s) named High Speed or High Bandwidth, in addition to the USB 1.x Full Speed signaling rate of 12 Mbit/s.  Features Standard USB 2.0 cable assembly, Type A male to type A male Max. signaling rate: 480 Mbit/s (60 MB/s) Blue colored cable  
- [HL-340 USB serial port (COM) USB to RS232 USB Nine Serial Line Support Windows 7-64](https://digilogelectronics.com/product/hl-340-usb-serial-port-com-usb-to-rs232-usb-nine-serial-line-support-windows-7-64/): This is HL-340 USB serial port (COM) USB to RS232 USB Nine Serial Line Support Windows 7-64. USB to RS232 conversion cable for USB and serial devices easily connect serial devices with features such as Plug and play, and hot-swappable. Can meet the notebook connected to the serial device, apply to mini-phones, digital cameras, communication MODEM, ISDN terminal adapters, LED control card. Note : Pin color may be different in actual product. Features  Single crystal 12M Tablet 340 USB port to serial port communication. USB1.1/2.0 compliant solution. Built-in 128 byte TX/512 byte RX buffer. Supports the auto-Handshake Protocol. Support Win95/98/98se/ME/2000/XP/win7 32bit [...]
- [Waveshare Extended 4-Ch PCIe Gen 2 ×1 Expander Stable Performance Driver-Free](https://digilogelectronics.com/product/waveshare-extended-4-ch-pcie-gen-2-x1-expander-stable-performance-driver-free/): The Waveshare’s Extended 4-Ch PCIe Gen 2×1 Expander is 4 4-channel expansion board for PCI Express devices. The module should be powered by a 12V power supply and when connecting to Compute Module 4 PoE 4G Board or the Compute Module 4 PoE 4G Board, no external power adapter is required. This adapter does not require a driver when using it except for PCIe devices. High-Performance Controller Adopts ASMedia Controller, Supports PCIe 2.0 Full Speed Stable Data Transmission Significantly Improved Performance Than Other Average Chips Outline Dimension    Useful link: To use this expander, please follow this tutorial. Features Extending 1-ch PCIe [...]
- [Waveshare R800C GSM/GPRS HAT For Raspberry Pi](https://digilogelectronics.com/product/waveshare-r800c-gsm-gprs-hat-for-raspberry-pi/): The R800C GSM/GPRS HAT is a handy, low-power Raspberry Pi HAT which features multi-communication functionalities: GSM, GPRS, and phone calls, applicable to countries or regions with 2G network coverage, up to 85.6kbps GPRS speed. It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, and so on. Pin Structure: Features Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson Nano Supports SMS, phone call, GPRS, TCP/IP, DTMF, HTTP, FTPl, etc. UART interface, for connecting controller boards like Arduino/STM32 Onboard voltage translator, 3.3V by default, switch to 5V via jumper 2x LED indicators, [...]
- [Argon Fan HAT for Raspberry Pi 4, 3B,3 B+, Includes 40mm Fan](https://digilogelectronics.com/product/argon-fan-hat-for-raspberry-pi-4-3b3-b-includes-40mm-fan/): Only needs a one-line script for full functionality. Even gives an easy-to-use fan controller allowing users to decide when the HAT should adjust the fan speed. Can change fan speed based on CPU temperature. Provides enough space for a heat sink to be used on the chips of the Raspberry Pi board. A fan HAT that uses a 40mm cooling fan to prevent overheating on the Raspberry Pi 3 and Raspberry Pi 4. Comes with a power button that can be used to do the following: forced shutdowns, safe shutdowns, reboots Features A fan HAT that uses a 40mm cooling fan [...]
- [Waveshare Industrial IoT Wireless Expansion Module Designed for Raspberry Pi Compute Module 4 (Without Power Adapter)](https://digilogelectronics.com/product/waveshare-industrial-iot-wireless-expansion-module-designed-for-raspberry-pi-compute-module-4-without-power-adapter/): This is a Waveshare Industrial IoT Wireless Expansion Module Designed for Raspberry Pi Compute Module 4. This is an industrial expansion module based on Raspberry Pi CM4, which features common interfaces such as Gigabit Ethernet, HDMI, USB, and GPIO, allowing additional 4G / 5G / LoRa wireless communication modules to be connected via the M.2 or Mini-PCIe socket. There are also industrial interfaces/resources including RS485, CAN, and RTC. Combined with the industrial rail-mount protection case, the module is an ideal choice for building IoT gateway, 4G/5G router, IoT data acquisition, or even the PLC device in the industrial automatic control system, [...]
- [WIZnet WizFi360-EVB-Pico](https://digilogelectronics.com/product/wiznet-wizfi360-evb-pico/): The WIZnet WizFi360-EVB-Pico is a development board designed for the WizFi360 module, a low-power, compact Wi-Fi module that provides Wi-Fi connectivity for IoT devices. The development board includes a WizFi360 module, a USB port for power and communication, and various other connectors for interfacing with other devices. The board also consists of an onboard antenna and a U.FL connector for an external antenna, providing flexibility for antenna placement and optimization. The WizFi360-EVB-Pico is designed to be used with the WIZnet WizFi360-EVB evaluation board, which provides a complete development environment for the WizFi360 module, including software development tools and example code. Features [...]
- [PIMORONI LiPo/LiIon Power Supply SHIM for Raspberry Pi](https://digilogelectronics.com/product/pimoroni-lipo-liion-power-supply-shim-for-raspberry-pi/): Everyone loves mobile projects but having a discrete, slick, and tidy power supply solution is always tricky. LiPo SHIM (formerly known as Zero LiPo) aims to give you the most compact Raspberry Pi power supply possible. You can either solder the 0.8mm thick PCB directly onto the GPIO pins on your Pi for a permanent solution, or solder on the provided 2×6 0.1″ female header which will allow you to remove your Zero LiPo at any time (but will block the GPIO pins). We use the TPS61232 step-up boost converter from Texas Instruments that offers up to 96% efficiency. The board includes power [...]
- [Raspberry Pi 8-ch Relay Expansion Board](https://digilogelectronics.com/product/raspberry-pi-8-ch-relay-expansion-board/): RPi Relay Board (B) – 8-Ch Relays Expansion Board for Raspberry Pi. Control high voltage products using your Raspberry Pi. Supports Raspberry Pi A+/B+/2B/3B/3B+. High-quality relays load up to 5A 250V AC or 5A 30V DC. Photocoupling isolation for interference prevention. Standard rail mount bottom case. Onboard LEDs for indicating relay status. Relay control pin selection jumper for custom pin control. Reserved control interface for working with controllers like PLC. Development resources and examples included. Features Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano High-quality relays, loads up to 5A 250V AC or 5A 30V [...]
- [X850 mSATA SSD Expansion Board for Raspberry Pi](https://digilogelectronics.com/product/x850-msata-ssd-expansion-board-for-raspberry-pi/): This is an mSATA expansion board for the raspberry pi, which can be used to expand the storage capacity of the raspberry pi by using mSATA SSD which utilizes a USB 3.0 port on the raspberry pi. You can use this extra storage to either store the operating system of the pi or just use it to add faster storage than the SD card. The mSATA SSD expansion board supports SSD’s of size up to 1TB, which can be used to add tons of storage to the raspberry pi. Features  Supports up to 1TB mSATA Solid-State Drive (SSD). Perfect Storage Solution [...]
- [Waveshare NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi, Globally Applicable](https://digilogelectronics.com/product/waveshare-nb-iot-cat-memtc-gnss-hat-for-raspberry-pi-globally-applicable/): Waveshare NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi, Based On SIM7080G, Globally Applicable. This is a telecommunication HAT which features multi communication functionalities: NB-IoT (Narrow Band-Internet of Things), Cat-M (aka eMTC, enhanced Machine Type Communication), and GNSS (Global Navigation Satellite System). With the developing of telecommunication technology LTE, 2G/3G networks are fading away, the future world would be dominated by IoT technologies consisting of low bandwidth NB-IoT/Cat-M and high bandwidth 4G/5G standards. This HAT supports global bands of NB-IoT and Cat-M, as well as positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT [...]
- [Waveshare HRB8825 Stepper Motor HAT For Raspberry Pi](https://digilogelectronics.com/product/waveshare-hrb8825-stepper-motor-hat-for-raspberry-pi/): HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Micro-stepping.HR8825 is a dual H-bridge motor driver chip that supports 32 subdivisions. It also integrates short-circuit, overheating, under-voltage and cross-conduction protection circuits, which can detect fault conditions and quickly cut off the H-bridge, thus providing protection for the motor and driver chip. VM is the input voltage, the input range is: 8.2V to 45V, the input range of the integrated voltage regulator chip is 8.2V to 28V. n SLEEP needs to be kept high, otherwise the chip will directly enter sleep mode, the H-bridge of the device [...]
- [Waveshare SIM7600G-H 4G HAT (B) for Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support](https://digilogelectronics.com/product/waveshare-sim7600g-h-4g-hat-b-for-raspberry-pi-lte-cat-4-4g-3g-2g-support/): Waveshare SIM7600G-H 4G HAT (B) for Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support, GNSS Positioning, Global Band connected via pogo pin or Micro USB connector .Dedicated Pogo pin for Raspberry Pi Zero/Zero W .Micro USB connector for other Raspberry Pi boards or PC Incorporates SIM7600G-H global band 4G module, compatible with 2G/3G/4G network with global support . USB HUB connector for other Raspberry Pi boards or PC, providing USB extension and 4G network access .Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, Bei Dou, Glonass, GALILEO, QZSS, LBS base station positioning .SIM card [...]
- [Waveshare Adapter Board for Arduino and Raspberry Pi](https://digilogelectronics.com/product/waveshare-adapter-board-for-arduino-and-raspberry-pi/): This is Waveshare Adapter Board for Arduino and Raspberry Pi . ARPI600 is a Raspberry Pi Expansion Board, it simply adapts the Raspberry Pi GPIO interface to Arduino pinouts making it possible to use your Raspberry Pi with a precious number of Arduino shields and hardware/software resources. The ARPI600 also supports XBee modules, adds up wireless features without having to hassle up with wires. What’s onboard ARPI600: Arduino connector: for connecting Arduino shields ICSP interface : Arduino ICSP XBee connector: for connecting XBee communication modules Sensor interface: for connecting sensors Raspberry Pi connector: for connecting Raspberry Pi USB TO UART TLC1543: AD converter PCF8563 : RTC CP2102 32.768KHz [...]
- [Waveshare Raspberry Pi 400 GPIO Header Adapter, Header Expansion, 2x 40PIN Header](https://digilogelectronics.com/product/waveshare-raspberry-pi-400-gpio-header-adapter-header-expansion-2x-40pin-header/): Raspberry Pi 400 GPIO Header Adapter, Header Expansion, 2x 40 PIN Header. Designed for Raspberry Pi 400 ,Color-Coded Header, Easy Expansion. Ensures sufficient power supply for multiple expansion modules with a USB power input connector. Feature Easy Expansion. Ensures sufficient power supply  multiple expansion modules with a USB power input connector. 2x 40 PIN Header Designed for Raspberry Pi  
- [PIMORONI Automation HAT for Raspberry Pi](https://digilogelectronics.com/product/pimoroni-automation-hat-for-raspberry-pi/): This PIMORONI Automation HAT for Raspberry Pi comes with relays, analog channels, powered outputs, and buffered inputs (all 24V tolerant) you can now hook up a plethora of goodies to your Raspberry Pi all at once. Better still each channel has indicator LEDs which means at a glance you can see what’s happening with your setup. Even the analog channels have dimming LEDs that allow you to see the value they are currently sensing – swish! Ideal for smart home and automation projects, giving your greenhouse intelligent sprinklers, or scheduling your fish feeding! Notes We recommend you use a set of brass M2.5 standoffs with [...]
- [Waveshare 2-Channel Isolated CAN Expansion HAT for Raspberry Pi, Dual Chips Solution](https://digilogelectronics.com/product/waveshare-2-channel-isolated-can-expansion-hat-for-raspberry-pi-dual-chips-solution/): 2-Channel Isolated CAN Bus Expansion HAT For Raspberry Pi, MCP2515 + SN65HVD230 Dual Chips Solution, Multi Onboard Protection Circuits. Enable Isolated And Stable CAN Bus Capability For Your Raspberry Pi .Standard Raspberry Pi 40PIN GPIO Header, Customized For Raspberry Pi Series Boards .MCP2515 CAN Controller + SN65HVD230 CAN Transceiver .SM24CANB TVS Diode, ESD Protection, Transient Peak Voltage Protection. high anti-interference capability, and stable operation. It suits for fields such as automotive devices or industrial automation. Useful link: To do Hardware and Software setup, please follow this tutorial. features Adopts MCP2515 and SN65HVD230 dual chips combined solution, allows 2-channel CAN communication Integrated power isolation, [...]
- [Waveshare High-Precision AD HAT For Raspberry Pi ADS1263 10-Ch 32-Bit ADC](https://digilogelectronics.com/product/waveshare-high-precision-ad-hat-for-raspberry-pi-ads1263-10-ch-32-bit-adc/): Waveshare High-Precision AD HAT For Raspberry Pi ADS1263 10-Ch 32-Bit ADC. Onboard AD header input, compatible with Waveshare sensor pinout, for connecting sorts of sensor modules .Onboard AD screw terminal input, allows connecting analog signal and analog power supply, general purpose interface .Onboard control header, make it easy to control the module by other hosts in additional to Raspberry Pi .Three-wire RTD (resistor temperature detector) circuit, enabled by soldering 0R resistor. Features Adopts ADS1263 chip, low noise, low temperature drift 10-ch 32-bit high precision ADC (5-ch differential input) 38.4kSPS Max sampling rate with embedded 24-bit auxiliary ADC IDAC, 2.5V internal reference [...]
- [Waveshare L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS, QZSS](https://digilogelectronics.com/product/waveshare-l76x-multi-gnss-hat-for-raspberry-pi-gps-bds-qzss/): This is a Raspberry Pi GNSS HAT that supports Multi-GNSS systems: GPS, BDS, and QZSS, with advantages such as fast positioning, high accuracy, low power consumption, and so on. It is an easy way to enable global positioning function for your Raspberry Pi. What’s on Board: L76B module CP2102: USB TO UART converter CAT24C32: EEPROM RT9193-33: power manager Backup mode wakeup button Standby switch Indicators: RXD/TXD: UART RX/TX indicator PPS: GPS status indicator PWR: power indicator Raspberry Pi GPIO connector: for connecting with Raspberry Pi USB TO UART port GNSS antenna connector Battery holder: supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts UART [...]
- [M5Stack Stamp Pico Mate with Pin Headers](https://digilogelectronics.com/product/m5stack-stamp-pico-mate-with-pin-headers/): M5 Stack STAMP-PICO Mate features an ultra-compact design with two low-power Xtensa 32-bit LX6 microprocessors at 240MHz on a PCB as tiny and delicate as a postage stamp. low power consumption. It is ideal for any space-constrained or battery-powered devices such as wearables, medical devices, sensors, and other IoT devices. MULTIFORM: 5 options of installation, means endless possibilities! (SMT, DIP, flywire, grove interface), with a high-temperature resistant plastic shell, 3D antenna and components can be better protected. LOW-CODE DEVELOPMENT: STAMP-PICO supports UIFlow graphical programming platform, scripting-free, cloud push; and fully compatible with Arduino, MicroPython, ESP32-IDF, and other mainstream development platforms to [...]
- [Waveshare 3 Channel Relay HAT Smart Home for Raspberry Pi 3](https://digilogelectronics.com/product/waveshare-3-channel-relay-hat-smart-home-for-raspberry-pi-3/): Create your DIY 3 channel remote control to ON-OFF three electrical devices from your Mobile application.The Waveshare 3 Channel Relay HAT Smart Home for Raspberry Pi 3 gives your Pi the ability to control high voltage/high current devices, which can be operated up to 230V AC 5A current easily makes normal home appliances become intelligent.   What’s on the RPi Relay Board: Raspberry Pi GPIO interface: for connecting Raspberry Pi Relay screw terminal: for connecting target devices Relays Photocoupler: PC817 Relay indicator LED on: relay NC is opened, NO is closed LED off: relay NC is closed, NO is opened Power indicator Relay control [...]
- [Waveshare Quad GPIO Expander for Raspberry Pi Pico](https://digilogelectronics.com/product/waveshare-quad-gpio-expander-for-raspberry-pi-pico/): This is Waveshare Quad GPIO Expander for Raspberry Pi Pico. This is a standard Raspberry Pi Pico female header for direct attaching Raspberry Pi Pico (if male header soldered), or just through jumper wires. Ensures sufficient power supply for multiple expansion modules with a USB power input connector. Features Standard Raspberry Pi Pico female header for direct attaching Raspberry Pi Pico (if male header soldered), or just through jumper wires. Four sets of 2×20 male headers allow connecting more Raspberry Pi Pico expansion modules. USB power input connector ensures sufficient power supply for multiple expansion modules. Clear pinout labels on the [...]
- [Waveshare SX1268 LoRa HAT for Raspberry Pi 433MHz Frequency Band](https://digilogelectronics.com/product/waveshare-sx1268-lora-hat-for-raspberry-pi-433mhz-frequency-band/): This is a Waveshare SX1268 LoRa HAT for Raspberry Pi 433MHz Frequency Band. It allows data transmission up to 5km through the serial port. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on. Comparing with normal LoRa modules, the SX1268 LoRa HAT achieves a longer communication distance, higher rate, lower consumption, better safety, and anti-interference. It is suitable for various applications such as industrial control, smart home, [...]
- [Waveshare GPIO Expander For Raspberry Pi Pico, 1x Raspberry Pi Standard 40 PIN, 1x Pico 2x 20PIN](https://digilogelectronics.com/product/waveshare-gpio-expander-for-raspberry-pi-pico-1x-raspberry-pi-standard-40pin-1x-pico-220pin/): This is a Waveshare GPIO Expander For Raspberry Pi Pico. This is a standard Raspberry Pi Pico female header for direct attaching Raspberry Pi Pico, or just through jumper wires. Ensures sufficient power supply for multiple expansion modules with a USB power input connector. Features Standard Raspberry Pi Pico female header for direct attaching Raspberry Pi Pico (if male header soldered), or just through jumper wires. USB power input connector ensures sufficient power supply for multiple expansion modules. Clear pinout labels on the front side, easy to use. Immersion gold process, beautiful & practical, stunning aesthetic looking.  
- [40pin Prototype Pi board Prototyping Pi Plate for Raspberry Pi 3/4B](https://digilogelectronics.com/product/40pin-prototype-pi-board-prototyping-pi-plate-for-raspberry-pi-3-4b/): The Proto Screw Shield is the ultimate breakout board for a Raspberry Pi. It combines a prototyping shield with a full set of 3.5 mm screw terminal blocks. The proto shield part lets you build custom circuitry and then you can easily & securely connect wires and sensors to the terminal blocks. Great for panel mounts, buttons, sensors, enclosures, etc. Proto Screw Shield is Pre-Assembled so that it can be directly screwed onto the thread posts. It is reliable and convenient. The Raspberry Pi Proto Screw Shield extends all pins of the Raspberry Pi out to 3.5mm pitch screw terminals. It also has a [...]
- [Waveshare 2-Channel Isolated RS485 Expansion HAT for Raspberry Pi](https://digilogelectronics.com/product/waveshare-2-channel-isolated-rs485-expansion-hat-for-raspberry-pi/): This is a Waveshare 2-Channel Isolated RS485 Expansion HAT for Raspberry Pi. This  dual-channel isolated RS485 extension board specially designed for raspberry PI, which adopts SC16IS752+SP3485 solution embeds with protection circuits such as power supply isolation, ADI magnetical isolation, and TVS diode, etc. This product adopts SC16IS752 as a controller. SC16IS752 is a dual-channel high-performance UART expansion chip that supports SPI and I2C interface communication. This module uses an SPI interface. Useful link: To do Hardware and Software setup, please follow this tutorial. What’s on Board: SC16IS752 UART expansion chip ADUM1412 digital isolator PC817 optocoupler SP3485 RS485 transceiver B0505LS power supply isolation [...]
- [Waveshare 1.3inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×240, SPI](https://digilogelectronics.com/product/waveshare-1-3inch-lcd-display-module-for-raspberry-pi-pico-65k-colors-240x240-spi/): 1.3inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 240×240, SPI is the newly launch 1.3 inches high-Quality LCD display from waveshare. The module comes with an Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico 1x Joystick And 4x User Buttons For Easy Interacting. Useful link: To do Hardware and Software setup, please follow this tutorial. Pinout Definition Features 240×240 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect SPI interface requires minimal IO pins 1x joystick and 4x user buttons for easy interacting Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython [...]
- [PI ZERO/ZERO W ENC28J60 Internet Module Supporting all RPI Board](https://digilogelectronics.com/product/pi-zero-zero-w-enc28j60-internet-module-supporting-all-rpi-board/): The ENC28J60 Ethernet Module is a board which contains an Ethernet port. The board is based on Microchip’s ENC28J60 integrated circuit and it can be used to provide internet connectivity to Raspberry Pi zero over Ethernet. Utilizes the new SSOP 12 package Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of network protocol requirements. The board connects directly to Raspberry Pi Zero. This module includes all you need to change your Raspberry Pi into an ethernet device for your network. These days many makers prefer WiFi type network communication. Ethernet still has lots of applications and still stays a fast and secure [...]
- [Waveshare Servo Driver HAT (B) for Raspberry Pi, 16-Channel, 12-bit, I2C](https://digilogelectronics.com/product/waveshare-servo-driver-hat-b-for-raspberry-pi-16-channel-12-bit-i2c/): This is a Waveshare Servo Driver HAT (B) for Raspberry Pi, 16-Channel, 12-bit, I2C. Needless to say, the Raspberry Pi is powerful enough in most cases, yet it’s not that good at providing precise PWM output. You may have tried to control a robotic arm or a hexapod walker by using the Pi, but finally, get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver HAT for you. This HAT can be used to drive servos such as: SG90 [...]
- [Waveshare CM4 To Pi 4B Adapter for Raspberry Pi Alternative Solution for Raspberry Pi 4B, CM4 optional](https://digilogelectronics.com/product/waveshare-cm4-to-pi-4b-adapter-for-raspberry-pi-alternative-solution-for-raspberry-pi-4b-cm4-optional/): This is a CM4 To Pi 4B Adapter for Raspberry Pi and is an alternative solution for Raspberry Pi 4B. Onboard 4 x USB 3.0 ports, Gigabit Ethernet port, PoE header, and so on. Features Onboard standard CM4 connector, support access to CM4 Lite / eMMc series boards with Quad Core Cortex A72 64-bit processor, more powerful performance Easily compatible with the interfaces of Raspberry Pi 4B board, the DISPLAY port position is inconsistent with the main board of Raspberry Pi 4B Onboard 4-ch USB 3.0 ports, compatible with USB 2.0 / 1.1 transmission Onboard RJ45 Gigabit Ethernet port, 10 / [...]
- [Waveshare Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as the CM4](https://digilogelectronics.com/product/waveshare-nano-base-board-b-for-raspberry-pi-compute-module-4-same-size-as-the-cm4/): This is Waveshare Nano Base Board (B) for Raspberry Pi Compute Module 4. The Differences. Although the Raspberry Pi Compute Module 4 has the same computing power as the Raspberry Pi 4, one can think of the Raspberry Pi Compute Module as a stripped-down version of the Raspberry Pi 4 with no ports. So, a carrier board is necessary to use the Compute Module The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated [...]
- [Raspberry Pi GPIO Multi-function Expansion Board for PI 4B/3B/3B+](https://digilogelectronics.com/product/raspberry-pi-gpio-multi-function-expansion-board-for-pi-4b-3b-3b/): This Raspberry Pi GPIO Expansion Shield For PI 4B/3B/3B+ Module is a multi-function GPIO expansion board for Raspberry PI3B, Raspberry PI3B+, and Raspberry PI4B.  It is easy to use and connect to your RPI board. Each pin is clearly labeled so it is easy to interface and identify. You can connect sensors, switches, and any component you want to interface with the Raspberry Pi. It also has screw terminals for hard and heavy-duty applications working in a real-world environment. Features  Perfect snap-in terminal for simple Raspberry PI connectivity. Multifunction GPIO expansion board. Easily connect Raspberry connectors and pins using jumpers. Compatible [...]
- [Waveshare Raspberry Pi 400 GPIO Header Adapter Header Expansion](https://digilogelectronics.com/product/waveshare-raspberry-pi-400-gpio-header-adapter-header-expansion/): Raspberry Pi 400 GPIO Header Adapter, Header Expansion. Designed for Raspberry Pi 400 , Color-Coded Header Easy Expansion. it is used to connect various applications to raspberry pie  Features Easy to use Color-coded header Designed for Raspberry Pi 400 Connectivity Technology: GPIO  
- [Waveshare SIM7600G-H M.2 4G HAT for Raspberry Pi, LTE CAT4 High Speed, 4G/3G/2G, GNSS, Global Band](https://digilogelectronics.com/product/waveshare-sim7600g-h-m-2-4g-hat-for-raspberry-pi-lte-cat4-high-speed-4g-3g-2g-gnss-global-band/): This is a 4G/3G/2G Raspberry Pi communication HAT with GNSS positioning and high-speed LTE CAT4 global band connection. By connecting it to a PC, Raspberry Pi, or Jetson Nano host board, it is easy to enable 4G high-speed networking, cloud platform communication, phone call/SMS, and global GNSS positioning functions. Note: Please check Attachment tab of SIM module comparison. Features Supports dial-up, phone calls, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable [...]
- [Waveshare Arduino Compatible Base Board For Raspberry Pi Compute Module 4, HDMI, USB, M.2 Slot](https://digilogelectronics.com/product/waveshare-arduino-compatible-base-board-for-raspberry-pi-compute-module-4-hdmi-usb-m-2-slot/): The Waveshare’s Arduino Compatible Base Board For Raspberry Pi Compute Module 4 is a basic expansion board compatible with Arduino, an expansion board that can be used with Raspberry Pi Compute Module 4, and supports a 5V DC power supply with a Type-C interface. The board is populated with an HDMI interface, one CSI interface and one USB interface, a standard Arduino interface, etc.   Features Compatible with Raspberry Pi Compute module 4 all variants M.2 slot for connecting separate communication modules, global 5G/4G/3G/2G cellular network support 10/100M/1000M auto-negotiation Ethernet port, with PoE, enabled USB HUB allows connecting more USB devices [...]
- [Seeeduino V4.3 (ATMega328P) Development Board](https://digilogelectronics.com/product/seeeduino-v4-3-atmega328p-development-board/): This is Seeeduino V4.3 (ATMega328P) Development Board, an Arduino-compatible board, which is based on ATmga328P MCU. There’re so many Arduinos and Arduino-compatible boards in the world, and we think that Seeeduino V4.3 is one of the best Arduino boards. Seeeduino V4.3 is much more stable and easier-to-use with our special red design for Seeeduino family. Seeeduino V4.3 is based on the Arduino UNO bootloader, and with an ATMEGA16U2 as a UART-to-USB converter, which means that the board can basically work like an FTDI chip. You can program the board via a micro-USB cable. Also, you can power the board via a [...]
- [Raspberry Pi GPIO Expansion Board One to Three](https://digilogelectronics.com/product/raspberry-pi-gpio-expansion-board-one-to-three/): This is a GPIO expansion board which expands standard raspberry pi GPIO to three individual set of GPIO’s. The board is compatible with the Raspberry Pi 3, 3B+, and 4B. The board comes with mounting hardware so that this can be mounted on the raspberry pi firmly. Features Universal GPIO expansion board, compatible with Raspberry Pi 4 Pi 3 Pi 2 Pi Model B+ One row GPIO port could change to be three rows GPIO ports High quality and high printing process It makes your experiment easier and convenient  
- [ESPLORA Joystick Photosensitive Sensor Board Compatible with Arduino (Supports LCD)](https://digilogelectronics.com/product/esplora-joystick-photosensitive-sensor-board-compatible-with-arduino-supports-lcd/): The ESPLORA Joystick Photosensitive Sensor Board is a microcontroller board compatible with Arduino & derived from the Arduino Leonardo. The ESPLORA Joystick Photosensitive Sensor Board differs from all preceding Arduino boards in that it provides a number of built-in; ready-to-use set of onboard sensors for interaction. It’s designed for people who want to get up and running with Arduino without having to learn about the electronics first. For a step-by-step introduction to the Esplora; check out the Getting Started with Esplora guide. The ESPLORA Joystick Photosensitive Sensor Board has onboard sound and light outputs, and several input sensors; including a joystick, a slider, a temperature sensor, an accelerometer, [...]
- [Wemos TTGO Xi 8F328P-U Board For Arduino Nano V3.0 Promini](https://digilogelectronics.com/product/wemos-ttgo-xi-8f328p-u-board-for-arduino-nano-v3-0-promini/): TTGO XI is a development board. Comes with USB chip, you can directly connect to the computer burning program. You can use Arduino.cc’s IDE to develop (you need your own installation support). The development environment is recommended, and the LGT support package can be installed directly in the development board manager. Features It comes with USB and is more convenient to use. The 8F328D can be powered by 3V3 and 5V, operating at 16M frequencies with excellent levels of compatibility. Built-in high precision RC, without external crystal oscillator, can be stable operation. Less peripheral parts, simple circuit design. 12 bit ADC (analog to [...]
- [Mega R3 Android Accessory Development Kit (ADK) + USB Cable](https://digilogelectronics.com/product/mega-r3-android-accessory-development-kit-adk-usb-cable/): The Mega R3 Android Accessory Development Kit (ADK) + USB Cable is a micro-controller board base on the ATmega2560. It has a USB host interface to connect with Android based phones, base on the MAX3421e IC. It has 54 digital input/output pins (of which 15 can be used as PWM outputs); 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator; a USB connection, a power jack, an ICSP header, and a reset button. The MEGA ADK is base on the Mega 2560. Similar to the Mega 2560 and Uno, it features an ATmega8U2 program as a USB-to-serial converter. Revision 3 of the Mega ADK board [...]
- [LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino](https://digilogelectronics.com/product/lilypad-328-atmega328p-main-board-16m-compatible-with-arduino/): The LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino-program micro-controller is designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight, round package design to minimize snagging and profile. With wide tabs that can be sewn down and connect with conductive thread. The LilyPad consists of an ATmega328 compatible with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. This board will run from 2V to 5V and offers large pin-out holes that make it easy to [...]
- [UNO Based ESP8266 Nodemcu Development Board](https://digilogelectronics.com/product/uno-based-esp8266-nodemcu-development-board/): The UNO Based ESP8266 Nodemcu Development Board in the form of the Arduino UNO board format. This board is compatible with the Arduino IDE and with NodeMCU. The board is controlled by the ESP8266 chip (a 32-Bit processor) and has a larger flash memory compared to an Arduino Uno. It consists of 11 digital I/O pins and 1 analog (input) pin. the board can be connected using a Micro-B type USB cable. The ESP8266 is an extremely popular microcontroller similar to Arduino with built-in WiFi. Typical ESP8266 ESP-12 boards do not have a convenient power or programming connection. It requires you to figure out how to supply 3.3V and more [...]
- [High Speed Micro SD Card Reader](https://digilogelectronics.com/product/high-speed-micro-sd-card-reader/): Your high-speed SD card like Class 10 cards needs high speed supported card reader to transfer the data with the speed, that actually the card supports. With this High-Speed Micro SD Card Reader performs the Read or Write operation with your SD card with a maximum transfer speed that your card Supports. This card reader supports up to 480 Mbps transfer speed and can be used for up to 512 GB SD card. Note: No SD card is included in the package. Features Color: Black Using standard USB2.0 chip, read and write speed 480Mbps. Support plug and play. The USB power supply without external power supply. [...]
- [Waveshare USB To UART Debugger Module for Raspberry Pi 5, Type-A Port, Onboard UART Connector, High Baud Rate Transmission](https://digilogelectronics.com/product/waveshare-usb-to-uart-debugger-module-for-raspberry-pi-5-type-a-port-onboard-uart-connector-high-baud-rate-transmission/): The UART Debugger Module for Raspberry Pi 5 is designed to facilitate stable transmission and debugging specifically for Raspberry Pi 5 devices. It offers multi-device compatibility and supports various systems including Mac, Linux, Android, and Windows. With built-in protection circuits, it ensures safety against overcurrent, overvoltage, and static discharge. Its durable construction and versatile communication level selection make it an ideal choice for Raspberry Pi 5 debugging tasks. Features Supports Mac, Linux, Android, Windows 7/8/8.1/10/11. Onboard self-recovery fuse and Transient Voltage Suppressor, anti-overcurrent and anti-overvoltage, anti-surge, anti-static, improves shock proof performance, stable and safe communication performance. Onboard IO protection circuits, anti-surge, [...]
- [Official Raspberry Pi Camera V2](https://digilogelectronics.com/product/official-raspberry-pi-camera-v2/): The 8MP Raspberry Pi Official Camera Module v2 can be used to take high-definition video, as well as stills photographs. It uses high quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video. Raspberry Pi Camera V2 attaches to Pi by way of one of the small sockets on the board upper surface and uses the dedicated CSI interface, designed especially for interfacing to cameras. It is suitable for mobile or other applications where size and weight are important. It connects to Raspberry [...]
- [Black Aluminum Heatsink for Raspberry Pi](https://digilogelectronics.com/product/black-aluminum-heatsink-for-raspberry-pi/): This is Black Aluminum Heatsink for Raspberry Pi an aluminum heatsink kit used for cooling the chips on Raspberry Pi. Comparing to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently. Besides, the installation is simple, what you need to do is to remove the heatsink protection and stick it on Raspberry Pi. This heatsink has adhesive film on the back. It is very easy to mount it on the BGA chip. Just remove the protective film on the back of the heatsink and press it gently to the BGA chip. [...]
- [Official Raspberry Pi Debug Probe](https://digilogelectronics.com/product/official-raspberry-pi-debug-probe/): The New Launched  Raspberry Pi Debug Probe is an inexpensive, all-in-one USB-to-serial debug and UART bridge. It provides the necessary hardware and cabling to support “plug and play” debugging of Raspberry Pi Pico and other microcontrollers- and microprocessor-based platforms. The Raspberry Pi Debug Probe provides both a processor serial debug interface (by default this is the ARM Serial Wire Debug interface) and an industry-standard UART interface. Both interfaces use a 3-pin debug connector, as specified in the Raspberry Pi 3-pin debug connector specification. The Raspberry Pi Debug Probe is provided as a kit, containing the probe hardware in a plastic case, [...]
- [Official Raspberry Pi 5 Active Cooler](https://digilogelectronics.com/product/official-raspberry-pi-5-active-cooler/): The Official Raspberry Pi 5 Active Cooler provides an alternative cooling solution for users who wish to use their Raspberry Pi 5 under sustained heavy load without a case. It combines a large aluminum metal heatsink with a variable-speed blower, again powered and controlled via the fan connector, and attaches to the Raspberry Pi 5 PCB via sprung pins into a pair of mounting holes. An aluminum heatsink with a built-in fan and thermal pads for easy mounting on the Raspberry Pi 5 using spring-loaded push pins. The fan is managed by the Pi 5 firmware, which adjusts speed based on [...]
- [Build Hat Power Supply](https://digilogelectronics.com/product/build-hat-power-supply/): Raspberry Pi released an official 48W (8V DC, 6A) power supply, designed for use with the Raspberry Pi Build HAT. Similarly, it can also power the Raspberry Pi via the BuildHAT. Power your Raspberry Pi Build HAT projects with the Raspberry Pi Build HAT Power Supply. This 48W power supply will power the Build HAT and connected LEGO  Technic motors, as well as your Raspberry Pi computer. Compatible with LEGO Technic motors and sensors included in the LEGO Education SPIKETM Portfolio, the Build HAT combines the power of Raspberry Pi computing with easy building opportunities to help you make creative and robust [...]
- [Official USB type-C 15.3W Power Supply For Raspberry Pi 4](https://digilogelectronics.com/product/official-usb-type-c-15-3w-power-supply-for-raspberry-pi-4/): The Official USB type C 15.3W Power Supply For Raspberry Pi 4 is Latest officially launched power supply for all new Raspberry Pi 4 Model. It is compatible with Indian sockets operate on 90V to 230v AC and provides stable 5V 3A power to the Pi. The adapter comes with 1.5m 18 AWG captive cable with USB-C output connector. The design of the adapter with a Raspberry LOGO engraved on the top which makes it different from any other adapter available in the market. Features Good Quality material 96-230Vac operating input range 50,000 hours MTBF 6-month warranty. USB-C connection goes straight into your Raspberry [...]
- [Official Raspberry Pi 4 Case-Red-White](https://digilogelectronics.com/product/official-raspberry-pi-4-case-red-white/): Official Raspberry Pi 4 Case-Red-White Keeps your  Raspberry Pi 4 Model B safe and protected. The case is made of strong ABS plastic material with Red-White combination and meticulously designed for Pi 4. It will provide adequate protection for your Pi and access to all the ports. This case comes with a Raspberry LOGO engraved on the white top of the cover and Rubber pads at the bottom to provide grip to the cabinet. This Two-Piece ABS Case for Pi 4 is also designed so that you can see the smooth Pi status LEDs clearly from the rubber reflector provided to the [...]
- [RP2040 Microcontroller IC by Raspberry PI](https://digilogelectronics.com/product/rp2040-microcontroller-ic-by-raspberry-pi/): RP2040 is the debut microcontroller from Raspberry Pi. It brings our signature values of high performance, low cost, and ease of use to the microcontroller space. With a large on-chip memory, symmetric dual-core processor complex, deterministic bus fabric, and rich peripheral set augmented with our unique Programmable I/O (PIO) subsystem, it provides professional users with unrivaled power and flexibility. Flexible I/O connects RP2040 to the physical world by allowing it to speak to almost any external device. High-performance breezes through integer workloads. Low cost helps ease the barrier to entry. This isn’t just a powerful chip: it’s designed to help you [...]
- [Official USB type-C 15.3W Power Supply For Raspberry Pi 4-Black](https://digilogelectronics.com/product/official-usb-type-c-15-3w-power-supply-for-raspberry-pi-4-black/): The Official USB type C 15.3W Power Supply For Raspberry Pi 4 is the Latest officially launched power supply for all new Raspberry Pi 4 Model. The adapter comes with 1.5m 18 AWG captive cable with a USB-C output connector. The design of the adapter with a Raspberry LOGO engraved on the top which makes it different from any other adapter available in the market. Features Good Quality material 96-230Vac operating input range 50,000 hours MTBF 6-month warranty. USB-C connection goes straight into your Raspberry Pi  
- [Human Body Sensing IR Pyroelectric Infrared Sensor Anti-theft Alarm Electronic KIT](https://digilogelectronics.com/product/human-body-sensing-ir-pyroelectric-infrared-sensor-anti-theft-alarm-electronic-kit/): Passive infrared (PIR) sensors use a pair of pyroelectric sensors to detect heat energy in the surrounding environment. The Pyroelectric infrared sensor anti-theft circuit is composed of a pyroelectric infrared sensor PIR, integrated operational amplifier LM393, 110 alarm circuit, and starting delay circuit. The circuit can be protected against theft. When the family leaves the bedroom, switch K1 is closed, and the circuit begins to work. As long as someone enters the room for some time, it will sound the alarm. Passive Infrared Radiation (PIR) sensor detects the change in infrared radiation of a warm-blooded moving object in its detection range. Features  Sensitivity range: [...]
- [Analog Micro Wind Generator System DC Motor](https://digilogelectronics.com/product/analog-micro-wind-generator-system-dc-motor/): Analog Micro Wind Generator System DC Motor is perfect as an inspirational learning resource for young children. Battery-operated electric motor produces airflow to power a wind-driven generator, which in turn powers a small LED. Note: 3xAA Battery not included Features Complete set of mini wind turbine generator model kits. It needs you to assemble the wind generator, you can enjoy the DIY fun at the same time. You can convert 360 degrees at any angle, and it will automatically face the wind direction. Power generation LED light, low power consumption of LED required, fly in your mouth or under a fan [...]
- [DIY Kit Light Control Sensor Switch Suite Photosensitive Induction Switch Kits DIY](https://digilogelectronics.com/product/diy-kit-light-control-sensor-switch-suite-photosensitive-induction-switch-kits-diy/): The DIY Kit Light Control Sensor Switch Suite offers a versatile solution for creating photosensitive induction switches. This kit includes components for assembling a sensor-based switch that responds to changes in ambient light. Users can customize and build their own light control system, making it suitable for various DIY projects. The suite is designed for ease of assembly, providing hobbyists with a practical and educational experience in electronics. With its photosensitive capabilities, the switch can autonomously control lights based on environmental lighting conditions, making it a useful addition to home automation or lighting projects. Features Versatile photosensitive induction switch. Comprehensive kit [...]
- [ZVS Driver Board for Tesla Coil Power Supply Board Induction Heating Module 12-30V](https://digilogelectronics.com/product/zvs-driver-board-for-tesla-coil-power-supply-board-induction-heating-module-12-30v/): A Zero Voltage Switching (ZVS) driver board is commonly used in applications like Tesla coils and induction heating modules. It helps achieve efficient and controlled switching of high-voltage power supplies. Features  Using military FR4-A material 1.6mm double-board circuit board, power line extra adds tin and optimizes line width of MOS tube drive circuit. Using two IRFP250N power field pipes, large current, small internal resistance, super-power. Using 1.25 copper wire large inductance, more stable performance.  Using 1% precision metal film resistors.  Use 25 * 24 * 16mm thick anti-static cooling. Using MKP 0.33UF 1200V two parallel resonant capacitors for high frequency. Secondary [...]
- [118MHz ~ 136MHz aviation band receiver kit High sensitive air radio DIY kit](https://digilogelectronics.com/product/118mhz-136mhz-aviation-band-receiver-kit-high-sensitive-air-radio-diy-kit/): Embark on a journey into the world of aviation communication with our 118MHz ~ 136MHz Aviation Band Receiver Kit. This DIY kit is designed for radio enthusiasts and hobbyists eager to explore the airwaves and tune into the fascinating realm of aviation frequencies Features Easy to use Easy to connect Good quality product Specifications Power supply: 12V (linear regulated power supply or battery is recommended)  Antenna: 50 ohms, unbalanced Typical receiving current: 90mA Receiving frequency: covering 118MHz-136MHz Working mode: AM
- [SeeedStudio Grove 1 kg Electromagnet Module](https://digilogelectronics.com/product/seeedstudio-grove-1-kg-electromagnet-module/): An electromagnet is a type of magnet in which the magnetic field is produced by electric current. An electric current flowing in a wire creates a magnetic field around the wire, due to Ampere’s law. To concentrate the magnetic field, in an electromagnet the wire is wound into a coil with many turns of wire lying side by side. The magnetic field of all the turns of wire passes through the center of the coil, creating a strong magnetic field there. Features  Grove shape It easy to use 1KG peak suction Low standby current
- [1000W ZVS Low Voltage Induction Heating Board Module Flyback Driver Heater DIY](https://digilogelectronics.com/product/1000w-zvs-low-voltage-induction-heating-board-module-flyback-driver-heater-diy/): The 1000W ZVS (Zero Voltage Switching) Low Voltage Induction Heating Board Module is a versatile and powerful electronic component designed for DIY enthusiasts and electronics hobbyists. This module is specifically crafted for induction heating applications, providing a reliable and efficient solution for heating various materials. The ZVS technology incorporated in this module ensures a smooth and efficient operation by minimizing voltage spikes and reducing power losses during the switching process. This contributes to the overall performance and longevity of the module. With a power rating of 1000W, the board is capable of generating significant heat for a wide range of applications. [...]
- [NE555 + CD4017 Red Blue Double Color Flashing Lights Board DIY Kit](https://digilogelectronics.com/product/ne555-cd4017-red-blue-double-color-flashing-lights-board-diy-kit/): The NE555 + CD4017 Red Blue Double Color Flashing Lights Board Kit is an engaging electronics project that combines the NE555 timer IC and the CD4017 counter/decoder to create a vibrant double-color flashing lights display. With red and blue LEDs, this kit offers a visually appealing light show. Ideal for DIY enthusiasts and electronics hobbyists, the kit provides an educational experience in assembling and understanding circuitry. The NE555’s timing precision and the CD4017’s sequencing capabilities make this kit an enjoyable and educational introduction to circuit building, offering a hands-on way to explore electronic components and their functions. Features Interesting circuit for [...]
- [DIY 5MM LED Board Kit Flashing LED Light Circuit Board Module](https://digilogelectronics.com/product/diy-5mm-led-board-kit-flashing-led-light-circuit-board-module/): The DIY 5mm LED Board Kit is an engaging and educational electronics kit designed for enthusiasts, hobbyists, and beginners interested in learning about electronics and creating their own custom LED displays. This kit includes a flashing LED light circuit board module featuring 5mm LEDs, providing a visually stimulating and customizable platform for hands-on experimentation. Features Versatile 5mm LEDs Flashing LED Circuit Board Module Educational and DIY-Friendly Customizable Design Easy Assembly Ideal for DIY Projects  
- [Official Arduino Sensor Kit](https://digilogelectronics.com/product/official-arduino-sensor-kit/): Official Arduino Sensor Kit is a joint production between the Arduino and Seeed, which has a dual trademark of Arduino and Seeed. It has 1o Grove modules and one grove based shield on a single PCB board. All these modules and base shields are connected through the PCB tracks, which means that you only need to plug the Arduino Sensor Kit into the Arduino UNO board. The Arduino Sensor Kit is designed in such a way that you can also take modules out of the PCB board and use Grove cables to connect them. You can build an Arduino project you [...]
- [World’s Smallest Solar Powered Car](https://digilogelectronics.com/product/worlds-smallest-solar-powered-car/): The World’s Smallest Solar Powered Car is eco-friendly, energy-saving, specially-designed and fashionable, and without doubt, it is a perfect teaching aid for students, is a fun and educational way to learn about solar power. The solar cell generates electricity from sunshine that drives a miniature motor that turns the wheels. This little car can really move. The mini racer is small enough to go anywhere with a nice little carrying container. The car will also work when close to a strong artificial light source. The supermini car/locust toys are powered by eco-friendly solar energy. Small but powerful with four wheels, solar energy [...]
- [ESP8266 Weather Station Kit for Arduino IDE IoT Starter](https://digilogelectronics.com/product/esp8266-weather-station-kit-for-arduino-ide-iot-starter/): This is ESP8266 Weather Station Kit for Arduino IDE IoT Starter. The weather station uses the ESP8266-12E to obtain data from the Internet: time of a city, weather data and forecast information for the next 3 days, scrolling on the SSD1306 OLED Display; the device can switch to display data from any city in the world – maybe your relatives or friends live there. The device uses sensors DHT11, BMP180,BH1750FVI to collect temperature, humidity, Atmospheric Pressure and light data. The weather station reads data indoors via sensor every 5 seconds and uploads it to the Internet every 60 seconds. You can see real-time [...]
- [Arduino Alvik Robot AKX00066](https://digilogelectronics.com/product/arduino-alvik-robot-akx00066/): Alvik simplifies coding and complex robot projects, enabling users of all levels to immerse themselves in the exciting world of programming and robotics. It’s also a cross-discipline tool that bridges the gap between education and the future of robotics with CSTA and NGSS-Aligned free courses. This innovative and versatile robot makes learning and creating more accessible and fun than ever before. Applications Educational Robotics: Teaching concepts of robotics and programming in schools and workshops. DIY Projects: Ideal for hobbyists to explore advanced robotics projects. Sensor Integration Experiments: Utilizing its onboard sensors for experiments involving object detection, color sensing, and motion tracking. [...]
- [Plusivo UNO R3 Super Starter Kit](https://digilogelectronics.com/product/plusivo-uno-r3-super-starter-kit/): This Plusivo UNO R3 Super Starter Kit includes everything you need to get started with Arduino programming and creating your own electronic projects and experiments. It is an extensive starter kit that includes 196 parts and detailed instructions for learning the ins and outs of Arduino programming.  Comes with a detailed and user-friendly tutorial: Free PDF tutorial with more than 22 lessons available for download  A great way for the beginners get started with Arduino programming  All modules are ready to use, no soldering needed  Durable Plastic Storage Box Included: helps you keep its small parts organized and easy to find  100% compatible with [...]
- [Arduino Mkr Iot Carrier Rev2 ABX0007](https://digilogelectronics.com/product/arduino-mkr-iot-carrier-rev2-abx00073/): This is ARDUINO MKR IOT CARRIER REV2. With this carrier in combination with any board from the MKR family, you can quickly create your next IoT project without any extra components. This carrier has all you need in sensors and actuators to create cool projects connected to the Internet. Using the MKR IoT Carrier Rev2 in combination with any board of the MKR family, you can quickly build: Environment monitoring stations: Using the sensors on the carrier, you can map different phenomena around you. You can easily measure temperature, humidity, barometric pressure and air quality or detect the movement of the board, [...]
- [Arduino make your Uno Kit AKX00037](https://digilogelectronics.com/product/arduino-make-your-uno-kit-akx00037-2/): Learn the basics of electronics by assembling manually your Arduino UNO, become familiar with soldering by mounting every single component, and then unleash your creativity with the only kit that becomes a synth!.The Arduino Make Your UNO kit is really the best way to learn how to solder. And when you are done, the packaging allows you to build a synth and make your music. A kit with all the components to build your very own Arduino UNO and audio synthesizer shield. The Make Your UNO Kit comes with a complete set of instructions in a dedicated content platform. This includes video material, a 3D interactive viewer for following detailed instructions, and how to program your board once it is finished. Features The kit comes with a comprehensive instruction [...]
- [DFRobot Gravity Flexible Piezo Film Vibration Sensor](https://digilogelectronics.com/product/dfrobot-gravity-flexible-piezo-film-vibration-sensor/): This is an Arduino-compatible piezo film vibration sensor. It is made up of flexible piezo film and converter board. The sensor is able to detect vibration, flexibility, impact, and touch. The film is a flexible component comprising a 28 µm thick piezoelectric PVDF polymer film with screen-printed Ag-ink electrodes, laminated to a 0.125 mm polyester substrate, and fitted with two crimped contacts. As the piezo film is displaced from the mechanical neutral axis and bending creates very high strain within the piezo polymer, high voltages (about ±90V) are generated. When the assembly is deflected by direct contact, the device acts as [...]
- [DFRobot Gravity Analog Turbidity Sensor For Arduino](https://digilogelectronics.com/product/dfrobot-gravity-analog-turbidity-sensor-for-arduino/): The Arduino turbidity sensor detects water quality by measuring the level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. As the TTS increases, the liquid turbidity level increases This Arduino turbidity sensor has both analog and digital signal output modes. You can select the mode according to the MCU as the threshold is adjustable in digital signal mode. Turbidity sensors can be used in the measurement of water quality in rivers and streams, wastewater and effluent measurements, sediment transport research, and laboratory measurements Connection Diagram: [...]
- [DFRobot 60W Adjustable DC-DC Buck Converter Module](https://digilogelectronics.com/product/dfrobot-60w-adjustable-dc-dc-buck-converter-module/): A buck converter is a DC-to-DC converter that steps down the input voltage and steps up the output current. It does not waste as much power as heat as a linear regulator. A buck converter is made up of a switch, a diode, an inductor, and a capacitor. The switch determines how much the input voltage reaches the inductor and capacitor. They act as filters to smooth out the output voltage and current. Still, bothered by how to correctly power your RGB LED strip or get smooth servo movement? Don’t worry, this 60W DC-DC buck converter takes care of all. This [...]
- [DFRobot MP2636 Power Booster & Charger Module](https://digilogelectronics.com/product/dfrobot-mp2636-power-booster-charger-module/): In many applications, we will use lithium batteries as our power solutions. In this kind of application, the most two important things are the power boost and battery charger. These two points are a prerequisite for the system. The traditional power boost and battery charge circuit are usually divided into two separate parts, the circuit will be relatively cumbersome to build.   The Monolithic Power Systems (MPS) MP2636 is highly-integrated, flexible switch-mode battery charger with system power path management, designed for single-cell Liion or Li-Polymer batteries used in a wide range of portable applications. It is really simple to use, once [...]
- [DFRobot Multi USB / RS232 / RS485 / TTL Converter](https://digilogelectronics.com/product/dfrobot-multi-usb-rs232-rs485-ttl-converter/): Multiplexer has a set of interfaces for a variety of multi-function adapter plates. It supports USB, TTL, RS232, RS485 interfaces between the system conversions. What’s more powerful is that it also supports one input multiple outputs, which greatly facilitates the communication between various controllers. Tip: Multiplexer board is divided into A and B interfaces. The signal can be convertered between A and B. The signal in the same interface can’t be convertered thus only one sender in the same interface, but it allows to have multiple receivers. Features Single chip USB to asynchronous serial data transfer interface. Unique USB FTDIChip-ID™ feature. [...]
- [DFRobot Fermion BMX160 9-axis Sensor (Breakout)](https://digilogelectronics.com/product/dfrobot-fermion-bmx160-9-axis-sensor-breakout/): This compact BMX160 9-axis sensor from Bosch Sensortec is an ideal solution for applications that face strict constraints of board space, power consumption, and appearance like wearable fitness trackers, smart remote controls, quadcopters, and so on. This BMX160 sensor is the smallest 9-axis sensor in the industry. It comprises an accelerometer, gyroscope, and geomagnetic sensor in a single package, and features less than 1.5mA power consumption. Due to the compact design, BMX160 can be ideally integrated into wearables like smartwatches or glasses for augmented reality. Combined with the BSX sensor data fusion software library of Bosch Sensortec, the sensor performance can [...]
- [DFRduino Mega 2560 (Arduino Mega 2560 R3 Compatible)](https://digilogelectronics.com/product/dfrduino-mega2560-arduino-mega-2560-r3-compatible/): The new version of DFRduino Mega2560 has improved the VIN power supply circuit by changing the easily overheat LDO to a DC-DC circuit for ensuring safety and reliability in long-term use. In addition to optimizing the overheating issue, it offers a wider input voltage range. What’s more, DFRduino Mega2560 can work steadily even when only powered by a 3.7V lithium battery. DFRduino Mega2560 is an ATmega2560-based microcontroller that provides full compatibility with “Arduino MEGA2560“. It features 54 digital I/O ports, 16 analog signal input ports, 4 UARTs(hardware serial ports), and a 16MHz crystal oscillator. The board comes with a bootloader that [...]
- [DFRobot Gravity: 360 Degree Rotary Encoder Module](https://digilogelectronics.com/product/dfrobot-gravity-360-degree-rotary-encoder-module/): This DFRobot Gravity: 360 Degree Rotary Encoder Module looks like a potentiometer, but it’s an encoder switch. It is a cascadable 360 ° rotary encoder switch with 20 pulses per revolution, and each pulse corresponds to a detent. There are LED lights set for each detent to allow users visually check the real-time status of the encoder. For ease of use, the module is designed with I2C data output and configurable accuracy within 1~51 for every detent (set in the program). For instance, when it is set to 1, turn on one LED light by rotating 2.5 revolutions; when set to [...]
- [DFRobot Gravity Serial Data Logger for Arduino](https://digilogelectronics.com/product/dfrobot-gravity-serial-data-logger-for-arduino/): Compared to the old MicroSD Card Module, this Gravity: Serial Data Logger can store data more conveniently and supports direct data printing through a serial port without additional codes. The Serial Data Logger provides onboard 128MB Flash memory, no more TF card is required. It comes with a USB function, which means you can directly connect it to a PC computer to read the stored files without using a card reader. Meanwhile, with the onboard LED indicator, data writing status can be viewed visually. And the onboard SAVE key makes it easier to store data in separate files. Connection Diagram: Applications Offline data [...]
- [DFRobot Gravity: I2C BME680 Environmental Sensor](https://digilogelectronics.com/product/dfrobot-gravity-i2c-bme680-environmental-sensor/): DFRobot BME680 Environmental Sensor is a low power gas, pressure, temperature & humidity sensor based on BOSCH BME680 sensor. It is a 4-in-1 multi-functional MEMS environmental sensor which integrates VOC (Volatile Organic Compounds) sensor, temperature sensor, humidity sensor and barometer. With DFRobot Gravity BME680 Environmental Sensor, you can monitor 4 environmental parameters simultaneously at the most. It is designed for air quality monitor, and due to the MEMS technology, BME680 has a small size and low power consumption. It can be widely used in environmental monitoring, home automation and control, Internet of Things (IoT) wearable device, GPS enhancement, etc. DFRobot Gravity BME680 environmental sensor [...]
- [DFRobot Gravity URM09 Analog Ultrasonic Sensor](https://digilogelectronics.com/product/dfrobot-gravity-urm09-analog-ultrasonic-sensor/): This is a DFRobot Gravity URM09 Analog Ultrasonic Sensor. What is an Ultrasonic Sensor? An Ultrasonic sensor is a device that can measure the distance to an object by using sound waves. It measures distance by sending out a sound wave at a specific frequency and listening for that sound wave to bounce back. Connection Diagram of the basic ultrasonic sensor operation Since it is known that sound travels through air at about 344 m/s (1129 ft/s), you can take the time for the sound wave to return and multiply it by 344 meters (or 1129 feet) to find the total round-trip distance [...]
- [DFRobot Gravity Analog AC Current Sensor (20A)](https://digilogelectronics.com/product/dfrobot-gravity-analog-ac-current-sensor-20a-availability-in-stock/): This is a DFRobot Gravity Analog AC Current Sensor (20A). When you want to measure the AC current, are you still having trouble cutting the wires, wiring, or soldering? Gravity: Analog AC Current Sensor comes to the rescue, eliminating the need to cut wires or reconnect circuits. Simply clamp the AC transformer probe on the AC line, and then plug the 3.5mm headphone jack into the signal conversion module to read the current AC current value. The analog output is designed to be compatible with the 3V3/5V micro-controller. It can be conveniently used for AC current measurement to monitor AC motors, [...]
- [DFRobot Gravity: Digital Crash Sensor (Right)](https://digilogelectronics.com/product/dfrobot-gravity-digital-crash-sensor-right/): A miniature snap-action switch, also trademarked and frequently known as a micro switch, is an electric switch that is actuated by very little physical force.Micro switches are very widely used; among their applications are appliances, machinery, industrial controls, vehicles, and many other places for control of electrical circuits. They are usually rated to carry current in control circuits only, although some switches can be directly used to control small motors, solenoids, lamps, or other devices.  This is a small micro switch crash sensor designed for the Arduino. It could be directly connected to the IO Expansion shield. It integrates the pull-up resistor and [...]
- [DFRobot Self-powered Wireless Switch (433Mhz)](https://digilogelectronics.com/product/dfrobot-self-powered-wireless-switch-433mhz/): In life, remote controllers can be seen everywhere, and most of them are inseparable from the battery. However, we often encounter problems when using the battery, for instance, it is troublesome to replace the battery, batteries are easy to corrode in a humid environment, or the waste batteries may cause serious environmental pollution. Do you know that wireless remote control can actually work without batteries! This self-powered wireless switch from DFRobot can send signals wirelessly without installing a battery. The switch is composed of a micro-generator and a 433Mhz radio frequency circuit. Based on the principle of electromagnetic induction, the micro generator [...]
- [DFRobot Gravity Capacitive Fingerprint Sensor](https://digilogelectronics.com/product/dfrobot-gravity-capacitive-fingerprint-sensor/): This is a DFRobot Gravity Capacitive Fingerprint Sensor with fingerprint collecting, processing, storing, and comparison integrated all-in-one. Taking ID809 high-performance processor and semiconductor fingerprint sensor as the core, the sensor is equipped with built-in IDfinger6.0 fingerprint algorithms that enable it to complete all the fingerprint recognition independently. When working with our Arduino Library, the module is able to realize functions like fingerprint registration, fingerprint deletion, etc. Also, we offer upper computer software to help users conveniently operate this sensor. This fingerprint sensor comes with round breathing LEDs and has a simple structure, small size, and delicate appearance. The sensor offers fast recognition speed [...]
- [](https://digilogelectronics.com/product/)
- [DFRobot Beetle RP2040 Mini Development Board](https://digilogelectronics.com/product/dfrobot-beetle-rp2040-mini-development-board/): Designed by Raspberry Pi, RP2040 features a dual-core ARM Cortex-M0+ processor with up to 133MHz clock and 264KB internal RAM, and supports USB 1.1 devices, which allows users to focus on function implementation instead of spending too much time and effort on improving codes. DFRobot Beetle RP2040 is a development board built around the RP2040 chip. It has a compact size of 27mm×20mm, which is easy to be embedded into small devices or projects. The board adopts a beginner-friendly large pad design, effectively reducing the difficulty of soldering. And it provides 8 carefully-selected GPIO ports that can serve as I2C, UART, SPI, digital [...]
- [DFRobot 1.47″ 172 320 IPS LCD Display Module](https://digilogelectronics.com/product/dfrobot-1-47%e2%80%b3-172-320-ips-lcd-display-module/): This exquisite little display is a good choice for projects requiring colorful and clear displaying effects! Based on the ST7789V3 driver chip, this 1.47″ display has 172×320 pixels with IPS any-angle viewing and SPI interface for communication. It comes with a 1mm narrow frame and rounded corners. The display can be used to display text messages, images, animations or videos. Also, with the supported Arduino GLD and LVGL libraries, more amazing dynamic effects can be achieved. It is widely suitable for DIY projects like mini game consoles, weather stations, pendants, clocks, video players, meters, etc. Applications Mini weather station Pendants Miniature [...]
- [DFRobot FireBeetle Covers-LoRa Radio 433MHz](https://digilogelectronics.com/product/dfrobot-firebeetle-covers-lora-radio-433mhz/): DFRobot FireBeetle series are low power consumption controllers designed for Internet of Things (IoT) development. The FireBeetle series are aiming straight at the point of fast and convenient low-power IoT building. There are three categories of the FireBeetle series, containing Boards (main control), Covers (expansion boards), and related Accessories. FireBeetle LoRa 433MHz wireless transmission module adopts a high-performance chip SX127x LoRa 433MHz and with built-in PA (power amplifier) gain, compatible with Arduino. It supports long-range monitor, FSK modulation and the maximum transmission rate is 300K[null bps]. It also supports LoRaTM, the maximum transmission rate is 37.5Kbps. The circuit current is even lower [...]
- [DFRobot Gravity: I2C Ozone Sensor (0-10ppm)](https://digilogelectronics.com/product/dfrobot-gravity-i2c-ozone-sensor-0-10ppm/): This is a DFRobot Gravity: I2C Ozone Sensor (0-10ppm). DFrobot offers an advanced level of sensors at an affordable cost than any other competitor brand in the market, making them ideal for the one who wants to start some Projects through Different types of sensors. After finding Different types of sensors on market, we at robu.in have determined that DFrobot is one of the good brands that offer a wide range of sensors at an Appropriate price. Gravity: I2C Ozone Sensor (0-10ppm) is based on electrochemical principles and it can measure the ambient O3 concentration accurately and conveniently. With high anti-interference [...]
- [DFRobot Gravity: Conductivity Sensor Switch](https://digilogelectronics.com/product/dfrobot-gravity-conductivity-sensor-switch/): The Gravity Conductivity Sensor Switch module can be used to detect if an object has electrical conductivity. Its maximum detection value is 10MΩ. It can detect not only coins, wires, metal and other good conductors, but also the human body, fruit, plants and other conductors. By touching the positive and negative terminals of the conductive switch, you can change the output state of the module. Use this to make interactive applications such as fruit pianos, musical wind chimes or interactive video game controllers so Super Mario using a bunch of bananas. As a member of Gravity Sensor Family, the conductivity switch inherits [...]
- [DFRobot Gravity: Analog Voltage Divider V2](https://digilogelectronics.com/product/dfrobot-gravity-analog-voltage-divider-v2/): The Analog Voltage Divider V2 can detect the supply voltage from 0.0245V to 25V. This module is based on resistor divider principle. The voltage detection module allows the input voltage to reduce 5 times. As the Arduino analog input voltage is normally maximum 5V, the input voltage of analog voltage detection module can not exceed 5Vx5 which is 25V. Notice: The new version of analog sensor port pin mapping has been changed as the following two features. Features Wide voltage range from 3.3V to 5V Standard assembling struct (two 3mm holes with multiple of 5cm as interval) Easily recognitive interfaces of sensors (“A” [...]
- [DFRobot 0.96″ 160×80 Color SPI TFT Display](https://digilogelectronics.com/product/dfrobot-0-96%e2%80%b3-160x80-color-spi-tft-display/): Small and exquisite, this 0.96” TFT screen employs an edge-to-edge design and offers glorious 160×80HD 16-bit color display, which can be suitable for wearable projects, mobile devices and smart home products. It supports DFRobot GDI display interface and can be conveniently connected to your GDI main-controller with FPC, plug and play, and easy to wire！ Compatible with 3.3V to 5V, the display consumes current less than 15mA in full-screen. It works well with controllers like Arduino UNO, Leonardo, ESP32, ESP8266, FireBeetle M0, etc Applications Wearable projects Mobile devices Smart home products. Features TFT material, better display effect GDI interface, no soldering required Narrower PCB, easy to [...]
- [DFRobot Gravity Gesture & Touch Sensor](https://digilogelectronics.com/product/dfrobot-gravity-gesture-touch-sensor/): This sensor module integrates gesture recognition and touch detects functions in one piece, and provides an adjustable detection range within 0~30cm. When connected to your microcontroller, it can detect a 5-way touch signal and 7 kinds of gestures: move left, move right, move forward, move backward, pull up, pull down, pull, and remove. Besides, the sensor is also equipped with the function of auto-sleep and waking up. The module comes with the gesture recognition algorithm and provides simple and reliable data output. Use the sensor to directly communicate with upper computer or micro-controllers like Arduino and Raspberry Pi via serial port [...]
- [DFRobot Gravity: Lightning Distance Sensor](https://digilogelectronics.com/product/dfrobot-gravity-lightning-distance-sensor/): This is DFRobot Gravity: Lightning Distance Sensor. DFrobot offers an advanced level of sensors at an affordable cost than any other competitor brand in the market, making them ideal for the one who wants to start some Projects through Different types of sensors. After finding Different types of sensors on market, we at robu.in have determined that DFrobot is one of the good brands that offer a wide range of sensors at an Appropriate price. Gravity: Lightning Sensor employs AMS innovative AS3935 Franklin lightning sensor IC and Coilcraft MA5532-AE dedicated antenna to detect lightning distance, intensity, and frequency within a radius [...]
- [DFRobot Gravity ICP-10111 Pressure Sensor](https://digilogelectronics.com/product/dfrobot-gravity-icp-10111-pressure-sensor/): This barometric pressure temperature sensor is equipped with TDK’s newly launched ICP-10111 barometric pressure sensor, which is based on MEMS capacitor technology to achieve ultra-low power consumption, industry-leading relative accuracy, and temperature offset coefficient. The Gravity: ICP-10111 barometric pressure temperature sensor can measure the pressure difference with an accuracy of ±1Pa, an accuracy enabling altitude measurement differentials as small as 8.5 cm, less than the height of a single stair step. The pressure noise can be as low as 0.4Pa, and the read data will be more stable. There is a built-in temperature sensor for air pressure compensation. The ICP-10111 offers [...]
- [DFRobot USB Charger for 7.4V LiPo Battery](https://digilogelectronics.com/product/dfrobot-usb-charger-for-7-4v-lipo-battery/): Still using a big, bulky, traditional power adapter to charge your lithium battery? DFRobot provides you with a compact and efficient 7.4V lithium battery USB charger, only the size and weight of an ordinary Gravity sensor. With just a mobile phone AC adapter (or power bank) and an Android data cable, you can safely and efficiently charge the 7.4V lithium battery up to 1A, which commonly used in various robots and motor drivers. The light-weight and micro USB interface features make it ideal for outdoor applications. In addition to serve as a charger, it can also be embedded in a variety of [...]
- [DFRobot Gravity: PM2.5 Air Quality Sensor](https://digilogelectronics.com/product/dfrobot-gravity-pm2-5-air-quality-sensor/): This is a DFRobot Gravity: PM2.5 Air Quality Sensor. DFrobot offers an advanced level of sensors at an affordable cost than any other competitor brand in the market, making them ideal for the one who wants to start some Projects through Different types of sensors. After finding Different types of sensors on market, we at robu.in have determined that DFrobot is one of the good brands that offer a wide range of sensors at an Appropriate price. As the most basic part of life, the air is attracting more and more attention, for example, the most common PM2.5, PM1.0, PM10, etc. [...]
- [DFRobot Gravity: Analog Sound Level Meter](https://digilogelectronics.com/product/dfrobot-gravity-analog-sound-level-meter/): This is DFRobot Gravity: Analog Sound Level Meter. DFrobot offers an advanced level of sensors at an affordable cost than any other competitor brand in the market, making them ideal for the one who wants to start some Projects through Different types of sensors. After finding Different types of sensors on the market, we at robu. in have determined that DFrobot is one of the good brands that offer a wide range of sensors at an Appropriate price. This is an Arduino compatible sound level meter(also known as a decibel meter, noise meter). It uses an instrument circuit and low noise [...]
- [DFRobot Gravity ENS160 Air Quality Sensor](https://digilogelectronics.com/product/dfrobot-gravity-ens160-air-quality-sensor/): This Gravity: ENS160 Air Quality Sensor, based on Scio Sense’s new ENS160 sensor chip, is specifically designed for indoor air quality monitoring and offers detection of multiple IAQ data (TVOC, eCO2, AQI). The innovative True VOC™ technology combines the metal oxide (MOX) technology that brings this sensor superior accuracy, fast response, anti-interference, etc. With intelligent on-chip algorithms, the ENS160 can directly output rich and easy-to-understand environmental data. Preheat the sensor 3 minutes before use then you can obtain accurate data more quickly. What’s more, the built-in automatic baseline correction algorithm ensures the long-term stability of the sensor. Connection Diagram: Applications Air [...]
- [DFRobot Gravity: MOSFET Power Controller](https://digilogelectronics.com/product/dfrobot-gravity-mosfet-power-controller/): In most Arduino projects, relays are the first choice to drive some large current device. It requires a certain amount of current to drive the internal coil to pick-up contact. But for some MCU, like Intel Edison, Intel joule, lilypad, Raspberry Pi and other microcontroller with limited amount of current GPIO, it’s hard to drive one or more relays simultaneously. The MOSFET power controller is a module which can drive a large current device with limited current GPIO. It works as a MOSFET relay or MOSFET driver. When you give it a digital high-level signal (3.3~10V), MOSFET turns on, vice versa. [...]
- [](https://digilogelectronics.com/product/): Build an awesome interactive project with this PAJ7620U2 gesture sensor! It is an interactive sensor with 3D gesture recognition that can recognize 13 gestures at most within 20cm. The sensor offers stable performance, fast response and high accuracy, which makes it an excellent choice for interactive applications like non-contact remote controllers, interactive robot, gesture-based game devices, smart lighting management, and so on. There are two recognition modes for this sensor: fast mode (9 gestures) and slow mode (13 gestures). In fast detection mode, the sensor can recognize 9 gestures: move left, right, up, down, forward, backward, clockwise, counter-clockwise, wave. The slow [...]
- [DFRobot Gravity PAJ7620U2 Gesture Sensor](https://digilogelectronics.com/product/dfrobot-gravity-paj7620u2-gesture-sensor/): Build an awesome interactive project with this PAJ7620U2 gesture sensor! It is an interactive sensor with 3D gesture recognition that can recognize 13 gestures at most within 20cm. The sensor offers stable performance, fast response and high accuracy, which makes it an excellent choice for interactive applications like non-contact remote controllers, interactive robot, gesture-based game devices, smart lighting management, and so on. There are two recognition modes for this sensor: fast mode (9 gestures) and slow mode (13 gestures). In fast detection mode, the sensor can recognize 9 gestures: move left, right, up, down, forward, backward, clockwise, counter-clockwise, wave. The slow [...]
- [Ai-Thinker ESP32-Audio-Kit Serial to WI-FI Development Board](https://digilogelectronics.com/product/ai-thinker-esp32-audio-kit-serial-to-wi-fi-development-board/): The core part of the ESP32 Audio Kit is ESP32- A1S module, it can work as a minimum independent system. Most audio interfaces are distributed on both sides of the development board for easy access, include a 3.5mm headphone jack, 3.5mm line-in jack, a pair of 2-pin headers for left/right speakers (up to 4Ω/3W output), and a couple of built-in microphones. The ESP32-Audio-Kit is outfitted with a dual-core Xtensa LX6 CPU (520Kb SRAM, 8Mb of PSRAM), micro SD slot (up to 64Gb of storage), and 802.11 b/g/n Wi-Fi + Bluetooth 4.2 LE. The ESP32-Audio-Kit is compatible with Espressif’s ESP-ADF framework, which [...]
- [SeeedStudio Seeeduino Xiao SAMD21 (Pre-Soldered)](https://digilogelectronics.com/product/seeedstudio-seeeduino-xiao-samd21-pre-soldered/): Note: Due to small size heating issue will be generated, but will not affect the working of the product. To avoid excessive heating you can use external heatsink. Take a look at Seeeduino XIAO(Pre-Soldered). What a small size and cute looking! It is the smallest member of the Seeeduino family. SeeedStudio Seeeduino Xiao SAMD21 (Pre-Soldered) still carries the powerful CPU-ARM Cortex-M0+(SAMD21G18) which is a low-power Arduino microcontroller. On the other hand, this little board has good performance in processing but needs less power. As a matter of fact, it is designed in a tiny size and can be used for Arduino wearable [...]
- [Waveshare PCIe To M.2 Adapter Board (C) for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing](https://digilogelectronics.com/product/waveshare-pcie-to-m-2-adapter-board-c-for-raspberry-pi-5-supports-nvme-protocol-m-2-solid-state-drive-high-speed-reading-writing/): PCIe To M.2 Adapter Board (C) For Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing, With Transparent Acrylic Mounting Plate, Side-Mounting Solution PCIe to M.2 adapter board C for Raspberry Pi 5, Compatible With 2230 / 2242 / 2260 / 2280 size, supports Gen2 and Gen3 modes, Supports Booting PI5 From Solid State Drive. The PCIe To M.2 Adapter Board (C) specifically designed for the Raspberry Pi 5, this cutting-edge accessory brings unparalleled storage expansion capabilities to your Raspberry Pi setup. Engineered to support NVMe protocol M.2 Solid State Drives (SSDs), this adapter ensures lightning-fast data transfer [...]
- [3-in-1 FT232RL USB to Serial Module USB / MINI / Micro to UART](https://digilogelectronics.com/product/3-in-1-ft232rl-usb-to-serial-module-usb-mini-micro-to-uart/): FT232RL 3 in 1 USB Transfer USB to Serial Port Module USB Type B / MINI USB / Micro USB 3 Interface to UART Module for Arduino Features  Precise notches and interfaces ensure perfect compatibility, suitable for installation locations, and easy installation.  Made of high-quality materials, which can effectively avoid corrosion and wear and are durable.  Professional chipset provides superior performance in the system.  Easy to operate, anti-ageing, prolonged service life.  Integration of common type B (print line), Mini, Micro three interfaces.All the pins of FT232 are drawn out to facilitate the evaluation of the FT232 scheme. Support for XP, for [...]
- [Waveshare USB HDMI Adapter for CM4-IO-BASE, Adapting FFC Connector To Standard Connector](https://digilogelectronics.com/product/waveshare-usb-hdmi-adapter-for-cm4-io-base-adapting-ffc-connector-to-standard-connector/): This is a Waveshare USB HDMI Adapter for CM4-IO-BASE, Adapting FFC Connector To Standard Connector. The adapter is used to connect raspberry pi with Display. In this adapter, we have  USB 2.0 PORT which helps to give power to the display, and an HDMI connector to give video and audio to the display. On the other side of the adapter, we have an HDMI FFC port and a USB 2.0 FFC port is used to connect Rasberry pi. Specialized USB HDMI adapter for Waveshare CM4-IO-BASE series boards, can be used with CM4 Mini Base Board CM4-IO-BASE-A and CM4-IO-BASE-B. Features HDMI Ethernet [...]
- [Waveshare FT232 USB UART Board (USB-Mini)](https://digilogelectronics.com/product/waveshare-ft232-usb-uart-board-usb-mini/): This is the FT232 USB UART converter Board. This is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus and will appear as a standard COM port. Pin connections of FT232 USB UART Board: VCCIO ↔ 3.3V or 5V output (the module is powered from USB, the onboard jumper should be shorted to 3.3V or 5V) GND ↔ GND TXD ↔ MCU.RX (signal direction: MCU.RX << FT232 << PC.TX) RXD ↔ MCU.TX (signal direction: MCU.TX >> FT232 >> PC.RX) RTS ↔ MCU.CTS (signal direction: MCU.CTS << [...]
- [MSATA to USB3.0 Adapter Module](https://digilogelectronics.com/product/msata-to-usb3-0-adapter-module/): This MSATA to USB 3.0 Adapter Module enables the connection of an mSATA module. The converter can be installed into the system through the USB interface. Features Supports 3*5cm mSATA SSD to USB 3.0 interface. High-end quality product. USB 3.0 interface. Plug and Play. Compatible with Windows 2000/xp/Vista/7/8/mac os 7.0 and above.
- [CAN Bus to TTL Serial Port Converter Adapter Communication Module](https://digilogelectronics.com/product/can-bus-to-ttl-serial-port-converter-adapter-communication-module/): The CAN Bus to TTL Serial Port Converter Adapter is a versatile communication module that bridges the gap between devices employing the CAN bus protocol and those utilizing TTL-level serial communication. This adapter enables seamless data exchange between different types of devices, making it ideal for applications in automotive diagnostics, industrial automation, and embedded systems. Note: Actual Products may vary in terms of size, shape, and color. Features Green backplane-circuit board, high quality. Communication Interfaces: CAN Bus and TTL Serial Port Standard 3.81mm industrial plug, another all-the-way pin interface, for more flexible applications. TI genuine chip VP230 chip program (SN65HVD230DR) LED [...]
- [Waveshare RP2040-Zero Raspberry Pi MCU With Presoldered Header](https://digilogelectronics.com/product/waveshare-rp2040-zero-raspberry-pi-mcu-with-presoldered-header/): This is Waveshare RP2040-Zero Raspberry Pi MCU With Presoldered Header. RP2040-Zero, A Low-Cost, High-Performance Pico-Like MCU Board Based On Raspberry Pi Microcontroller RP2040 What’s On Board USB Type-C connector W25Q16JVUXIQ 2MB NOR-Flash BOOT button press it when resetting to enter download mode RESET button WS2812 cool RGB LED ME621 low dropout LDO, max current 800MA RP2040 dual-core processor, up to 133MHz operating frequency RP2040 pins 10x solder points, 9 of which are for GPIO Features RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 264KB of SRAM, [...]
- [EZ-USB FX2LP CY7C68013A USB Development Board Logic Analyzer](https://digilogelectronics.com/product/ez-usb-fx2lp-cy7c68013a-usb-development-board-logic-analyzer-2/): This EZ-USB FX2LP CY7C68013A USB Development Board Logic Analyzer provides an ideal tool for learning about the Cypress EZ-USB FX2LP Microcontroller. This development board breakout all the GPIO of the microcontroller; so it will be very convenient for learners to expand their own design. It also uses the actual silicon for the entire development, Cypress’s software utilities and example firmware allow the user to generate USB traffic in hours, not weeks! For the very details, you can access the EZ-USBu017d Technical Reference Manual (TRM) at Here. For software collaterals download SuiteUSB. EZ-USB FX2LP CY7C68013A USB development Board Logic Analyzer uses CY7C68013A-56 chip with [...]
- [DWIN USB to connecting line Adapter](https://digilogelectronics.com/product/dwin-usb-to-connecting-line-adapter/): This HDL6628 Board is basically an adapter board that is used for communication between computer and Smart Screen. 10 Pin FFC / FPC cable. Pin Interface: As shown in the above figure One-end of the different side FCC row line is connected to the terminal block of the screen, and the other end is connected to the DWIN HDL662B adapter board, both blue sides face up. One end of the double-male USB cable is connected to the adapter board, and the other end is connected to the computer for communication.  
- [USB Adapter Board Male To Female Adapter Micro USB/Type-C Interface 4P 2.54mm](https://digilogelectronics.com/product/usb-adapter-board-male-to-female-adapter-micro-usb-type-c-interface-4p-2-54mm/): This is USB Adapter Board Male To Female Adapter Micro USB/Type-c Interface 4P 2.54mm. It is a simple interface converter. It includes 4P Terminal, Micro USB female, Type-C USB female, Type A USB male and Type A USB female. It can achieve mutual conversion between these five interfaces.It can be used as a voltage interface converter or as a data interface converter. This product is known as This product is known as XY-USB4, XY-USB4 Module, USB Head Switchboard, USB Male to Female, XY-USB4 5V USB Head, USB Head Switchboard USB Male To Female, USB Head Connector to Micro Female Adapter Board, [...]
- [HLK-RM04 UART to Serial Wifi Ethernet Wifi Module](https://digilogelectronics.com/product/hlk-rm04-uart-to-serial-wifi-ethernet-wifi-module/): This is HLK-RM04 UART to Serial Wifi Ethernet Wifi Module. HLK-RM04 A new low cost embedded UART-ETH-WIFI module (serial port-Ethernet-Wireless network). This product is an embedded module based on the universal serial interface network standard, the built-in TCP / IP protocol stack allows the user, serial port, Ethernet, wireless network (wifi) conversions between the interface. HLK-RM04 through the module, traditional serial devices do not need to change any configuration; The data can be transmitted through the Internet network. Users provide a quick solution for serial devices to transfer data over Ethernet. Here is the link of Wireless module/Serial to RJ45/Serial To Wifi HLK-RMO4 Features  Serial [...]
- [Waveshare CP2102 USB UART Board (Type C), USB To UART (TTL) Communication Module, USB-C Connector](https://digilogelectronics.com/product/waveshare-cp2102-usb-uart-board-type-c-usb-to-uart-ttl-communication-module-usb-c-connector/): Waveshare CP2102 USB UART Board (Type C) USB To UART (TTL) Communication Module USB-C Connector is a breakout board supporting USB Type-C. The board features the CP2102 chip which is dedicated for USB to UART Bridge through virtual COM port drivers that are needed for device functioning to facilitate host communication with CP210x based devices. These devices can also interface with a host using the direct access driver. These drivers make the USB device appear as an additional COM port available to the system. Features Supports Mac OS, Linux, Android, WinCE, Windows 7/8/10/11… Voltage output support: 5V or 3.3V Integrated USB [...]
- [Waveshare RS485 CAN HAT for Raspberry Pi](https://digilogelectronics.com/product/waveshare-rs485-can-hat-for-raspberry-pi/): The Waveshare RS485 CAN HAT for Raspberry Pi will enable your Pi to communicate with other devices stably in long-distance via RS485/CAN functions. RS485 is one of the most robust wired serial communication protocol that can support distance up to 1200 meters (4000 ft) while CAN (Controller Area Network) is used in automotive that offer high immunity to noise in cars. Yes, this board support both RS485 and CAN, bidirectional communication. You can use both the standards/protocols at the same time because each of them uses different peripherals for communication. CAN controller uses SPI while RS485 uses UART from Raspberry Pi. Features Standard [...]
- [CP2102 MICRO USB to UART TTL Module 6Pin Serial Converter UART STC Replace FT232](https://digilogelectronics.com/product/cp2102-micro-usb-to-uart-ttl-module-6pin-serial-converter-uart-stc-replace-ft232/): CP2102 MICRO USB to UART TTL Module 6Pin Serial Converter UART STC Replace FT232 has original chip CP2102, generate a COM port after installing the driver. Then the standard input MICRO MINI-USB cable is connected to the computer USB interface, with 3.3V and 5V two power output With a resettable fuse. In the event of accidental short-circuit can effectively protect your device and computer USB port to download Onboard status indicators, receive indicator properly installed drive status indicator remains, send and receive indicator flashes when communicating with run LED indicator. Supports baud rates from 300bps ~ 1Mbps between the communication format [...]
- [USB Mini Discharge Load Resistor 2A/1A with 1A green LED, 2A red LED](https://digilogelectronics.com/product/usb-mini-discharge-load-resistor-2a-1a-with-1a-green-led-2a-red-led/): This is USB Mini discharge Load Resistor 2A/1A with 1A green LED, 2A red LED. Using toggle switch, two-color work lights: 1A and 2A can be directly switched current discharge. When the switch 1A work, the green light. When the switch 2A work, the red light will ON. Large area copper, increase the cooling holes: the back of the expansion of the copper area, increase the cooling hole. Enhanced cooling function. True 5 ohm winding resistance: The discharge resistance uses a customizable true 5 ohm winding resistance (higher cost), resulting in more accurate test results (closer to 2A and Function switch [...]
- [PCF8575 Remote 16 Bits I2C IIC SMBus I/O Expander Module](https://digilogelectronics.com/product/pcf8575-remote-16-bits-i2c-iic-smbus-i-o-expander-module/): Are the I/O pins exhausted? This PCF8575 Remote 16 Bits I2C IIC SMBus I/O Expander Module is a large module allows the user to expand up to 16 i/o with only two i/o for control. The PCF8575 is connected via an I2C interface and features 16-bit near-bi-directional input/output pins. Onboard 3.3V level converter circuit, if you don’t have a solder pad of VCC-VDD, the PCF8575 level is 3.3V. If you solder it, the level will be the same as with VCC Features 16 individually addressable pins. Each pin configurable for input or output Open drain interrupts output pin for input change interrupt. [...]
- [W5500 TCP / IP SPI to LAN Ethernet Interface SPI to LAN / Ethernet Converter](https://digilogelectronics.com/product/w5500-tcp-ip-spi-to-lan-ethernet-interface-spi-to-lan-ethernet-converter-2/): The W5500 is a full-featured TCP/IP embedded Ethernet controller that provides an easier Internet connection solution for embedded systems. The hardware logic gates are used to implement the transport layer and network layer of the TCP/IP protocol stack (eg TCP). , UDP, ICMP, IPv4, ARP, IGMP, PPPoE and other protocols), and integrated data link layer, physical layer, and 32K bytes of on-chip RAM as data transceiving buffer. The host computer main control chip only needs to undertake the processing task of the TCP/IP application layer control information. Thereby, the workload of the host computer for data copying, protocol processing and interrupt [...]
- [CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi](https://digilogelectronics.com/product/ch340g-usb-to-ttlserial-converter-for-arduino-nano-raspberry-pi/): This is CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi, USB to TTL / USB-TTL /STC microcontroller programmer / PL2303 in nine upgrades plate with a transparent cover Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc. This USB–TTL converter is based on CH340G USB to Serial TTL converter chip. The module can be used for 3.3V logic level signals, the and has the option to switch from 5V to 3.3V logic level using a 2 pin shunt supplied with the module. The CH340 USB to serial adaptor makes use of the CH340 USB to serial IC to provide a low-cost alternative to our popular FTDI based [...]
- [CP2102(6-pin) USB 2.0 to TTL UART serial converter](https://digilogelectronics.com/product/cp21026-pin-usb-2-0-to-ttl-uart-serial-converter-2/): This is the CP2102(6-pin) USB 2.0 to TTL UART serial converter module. This is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus and will appear as a standard COM port. ThisCP2102 doesn’t require any external oscillator, it onboard-board voltage regulator, and it even uses a reprogrammable internal EEPROM for the device description. The full hardware UART has flow control for baud rates from 300bps to 921600bps. This breakout also allows you to connect the TX/RX pins of your favorite microcontroller or serial application to the RX/TX pins of the [...]
- [PCF8574T I2C I/O Extension Board](https://digilogelectronics.com/product/pcf8574t-i2c-i-o-extension-board-2/): The PCF8574 IO Expansion Board is used as remote 8-bit I/O expander for I2C-bus. Up to 8 PCF8574, IO Expansion Board can be connected to the I2C-bus, providing up to 64 I/O ports. The PCF8574 IO Expansion Board features I2C pinheader on one side, and I2C connector on the opposite side. Hence, it’s more flexible to connect the board to your development system. The board also supports I2C cascading, allowing the use of multi module connected to the I2C bus at the same time by connecting the pinheader and connector. Features Based on PCF8574 Chip I2C Interface 8-bit parallel port Can be used with Arduino as well [...]
- [5/12/24V 4CH Relay Module Programmable Trigger Delay Time Motor Positive Reversing Controller DC6-24V](https://digilogelectronics.com/product/5-12-24v-4ch-relay-module-programmable-trigger-delay-time-motor-positive-reversing-controller-dc6-24v/): The 5/12/24V 4CH Relay Module is a versatile motor controller designed for DC6-24V applications. Featuring four relay channels, it enables precise control and programmable trigger delay times, facilitating efficient motor positive reversing. This module provides flexibility with voltage compatibility (5V, 12V, 24V) and supports various DC power supplies. The programmable trigger delay allows customizable timing for specific applications. Ideal for motor control scenarios, it streamlines positive and reversing operations. With a compact design and broad voltage range, this relay module is suitable for diverse automation projects, ensuring reliable performance and ease of integration. Perfect for applications requiring programmable and timed motor [...]
- [IIC/I2C Serial Interface Adapter Module](https://digilogelectronics.com/product/iic-i2c-serial-interface-adapter-module/): This is IIC/I2C Serial Interface Adapter Module. This is a RoHS compliant I2C Serial LCD Daughter board that can be connected to a standard 16×2 or 20×4 Character Display Module that supports 4-bit mode. All Character Modules sold on our site support 4-bit mode, and nearly all commercially available 16×2 and 20×4 line character modules support it too. This board has a PCF8574 I2C chip that converts I2C serial data to parallel data for the LCD display. There are many examples on the internet for using this board with Arduino. Do a search for “Arduino LCD PCF8574“. The I2C address is 0x3F by default, but [...]
- [DC12V 24V Dual MOSFET LED Digital Time Delay Relay Trigger Cycle Timer Delay Switch Circuit Board DC7-30V](https://digilogelectronics.com/product/dc12v-24v-dual-mosfet-led-digital-time-delay-relay-trigger-cycle-timer-delay-switch-circuit-board-dc7-30v/): The DC12V 24V Dual MOSFET LED Digital Time Delay Relay is a versatile circuit board designed for timed control applications. Operating within a wide voltage range of DC7-30V, it features dual MOSFETs for efficient switching. The digital timer enables precise control of relay trigger cycles, making it suitable for applications requiring delayed activation or deactivation. This board offers a reliable solution for creating time-delayed circuits in various electronic projects and systems. Note: Image may vary in terms of color Features and Specifications Dual MOSFET LED Digital Time Delay Relay Input Voltage: DC7-30V (compatible with both DC12V and DC24V) Digital Display: LED [...]
- [7-24V Modbus RTU 1 Channel RS232 Serial Relay Module](https://digilogelectronics.com/product/7-24v-modbus-rtu-1-channel-rs232-serial-relay-module/): This is a 7-24V Modbus RTU 1 Channel RS232 Serial Relay Module. The 7-24V Modbus RTU 1 Channel RS232 Serial Relay Module is a versatile industrial control solution. With a single relay channel, it enables precise remote control in automation setups. The module communicates through the widely-used RS232 serial protocol, ensuring seamless integration into existing systems. Its broad voltage range, accommodating 7-24V, provides flexibility in power supply configurations. Ideal for applications demanding efficient and reliable relay-based control, this module is designed for compatibility and performance in diverse industrial environments. Features Enables remote control functionality, facilitating automation and ease of operation. Suitable [...]
- [BIGTREETECH BTT Relay V1.2 Automatic Shutdown Module After Printing 3D Printer Expansion Board SKR V1.3 Delta CR10 Extruder Thunder](https://digilogelectronics.com/product/bigtreetech-btt-relay-v1-2-automatic-shutdown-module-after-printing-3d-printer-expansion-board-skr-v1-3-delta-cr10-extruder-thunder/): This is a BIGTREETECH Relay V1.2 Automatic Shutdown Module. BIGTREETECH Relay V1.2 is an upgrade of the original (BIGTREETECH V1.0). After upgrading, a small MCU was added on the module to make the module more controllable and stable. Besides , we have also increased short circuit detection circuit. After connecting the 5V and GND on the motherboard to the module, if there is a 5V short circuit, the module will immediately power off to prevent damage on the motherboard and the risk of fire caused by short circuit. BIGTREETECH Relay V1.2 Automatic Shutdown Module will automatically cut off the power after [...]
- [7-24V Modbus RTU 2 Channel RS232 Serial Relay Module](https://digilogelectronics.com/product/7-24v-modbus-rtu-2-channel-rs232-serial-relay-module/): This is a 7-24V Modbus RTU 2 Channel RS232 Serial Relay Module. The 7-24V Modbus RTU 2 Channel RS232 Serial Relay Module is a robust industrial control solution. Featuring two relay channels for precise device control, it employs the Modbus RTU protocol and RS232 serial communication for seamless integration into automation systems. With a versatile voltage range of 7-24V, this module offers flexibility in power supply configurations. Its compact design, LED indicators, and industrial-grade build make it an ideal choice for applications demanding reliable and efficient relay-based control in diverse industrial environments. Features Equipped with two relay channels, allowing for simultaneous control [...]
- [Hanyoung Nux T57NE-10A Analog On delay Timer](https://digilogelectronics.com/product/hanyoung-nux-t57ne-10a-analog-on-delay-timer/): The T57NE-10A Analog On-Delay Timer is a sophisticated electronic control device designed to offer precise timing functionality in various industrial and commercial applications. This timer is renowned for its accuracy, reliability, and user-friendly operation, making it an essential component in automation, manufacturing, and control systems. Features Precise Timing Control Adjustable Time Range Analog Input Compatibility User-Friendly Interface LED Status Indicators Output Activation DIN Rail Mounting Robust Build Quality Versatile Applications Reliable Performance Flexible Integration Specifications Life span of relay Mechanical : More than 10 million times / Electrical : More than 100,000 times Dielectric strength: 2000 V a.c 50 / 60 [...]
- [DC24V 1 Channel Relay Module Delay Timer Control Switch Board](https://digilogelectronics.com/product/dc24v-1-channel-relay-module-delay-timer-control-switch-board/): Introducing DC24V 1 Channel Relay Module Delay Timer Control Switch Board, a cutting-edge solution designed with user simplicity and enhanced functionality in mind. This upgraded module features improvements to meet users’ evolving needs, including an increased power supply anti-reverse function for added safety. The utilization of opto-isolated input and output enhances anti-jamming capability and reduces power consumption. Note: Actual product may vary from images in terms of brand value printed or color of board. Features Enhanced Safety with Anti-Reverse Function: New upgrades include an increased power supply anti-reverse function for added safety in operations. Opto Isolated Input and Output: Utilizes opto-isolated input and output, enhancing [...]
- [DC 5V Bluetooth 4, Channels Relay Module, Internet Smart Remote, Control Mobile Phone, Switch Wireless Relay](https://digilogelectronics.com/product/dc-5v-bluetooth-4-channels-relay-module-internet-smart-remote-control-mobile-phone-switch-wireless-relay/): This module is ideally suited to controlling larger voltages with the project. This is a single channel relay module that can be used to activate up to 250V AC and 30V DC. This allows you to build in device control, operating remote lights or triggering systems when the module is supplied the signal. These modules are designed for the connected age we live in. Each module has an onboard Bluetooth chipset that will provide the signal to trigger the relay. Using a Bluetooth scanning device, such as a mobile phone, you will be able to pick up the relay. First, you [...]
- [7-24V Modbus RTU 2, Channels Relay Module, RS485/TTL Anti-Reverse, Connection](https://digilogelectronics.com/product/7-24v-modbus-rtu-2-channels-relay-module-rs485-ttl-anti-reverse-connection/): LC 2 channel Modbus relay module equipped with mature and stable 8-bit MCU and RS485 level communication chip adopt standard MODBUS RTU format RS485 communication protocol, It can realize 1-way input signal detection and 2-way relay output, can be used for digital detection or power control occasions. Features On-board mature and stable 8bit MCU and MAX485 level conversion chip Communication protocol: support standard Modbus RTU protocol Communication interface: Support RS485 / TTL UART interface Communication baud rate: 4800/9600/19200, default 9600bps, support power saving Photocoupler input signal range: DC3.3-30V (This input cannot be used for relay control) Device address: range 1-255, default [...]
- [7-24V Modbus RTU 4 Channel RS232 Serial Relay Module](https://digilogelectronics.com/product/7-24v-modbus-rtu-4-channel-rs232-serial-relay-module-2/): The 7-24V Modbus RTU 4 Channel RS232 Serial Relay Module is a powerful industrial control solution. With four relay channels, it offers precise and simultaneous control of multiple devices. Utilizing the Modbus RTU protocol and RS232 serial communication, it seamlessly integrates into automation systems. The module supports a versatile 7-24V input voltage range, providing flexibility in power supply configurations. Its robust design, LED indicators, and industrial-grade construction make it ideal for diverse applications, delivering reliable and efficient relay-based control in demanding industrial environments. Features Allows simultaneous control of up to four devices, enhancing flexibility in automation setups. Built to withstand challenging [...]
- [](https://digilogelectronics.com/product/)
- [ESP8266 WIFI relay module network relay ESP8266 relay module](https://digilogelectronics.com/product/esp8266-wifi-relay-module-network-relay-esp8266-relay-module/): This WiFi relay module carries an ESP8266 WIFI relay module and microcontroller. It will send the serial port instructions to the cell phone APP and Implementation within the local area network (LAN) for wireless control relay. This module is ideally suited to controlling larger voltages in your project through WIFI. This is a 1 channel relay module that can be used to activate up to 250V AC and 30V DC. This allows you to build in device control, operate remote lights or triggering systems when the module is supplied with a signal. Features Diode effusion protection. Short response time. Onboard Relay: [...]
- [1 Channel Relay Module, 30A with Optocoupler, Isolation 5V Supports, High and Low Triger, （with Guide Rail）](https://digilogelectronics.com/product/1-channel-relay-module-30a-with-optocoupler-isolation-5v-supports-high-and-low-triger-%ef%bc%88with-guide-rail%ef%bc%89/): This 1 channel 5V 30A relay control board module with optocoupler modules is compliant with international safety standards, control and load areas isolation trenches it has a single relay a genuine. The inputs of 1 Channel 5V 30A Relay Module are isolated to protect any delicate control circuitry. The power supply and relay instructions, lit, a disconnect are off. The input signal, signal, common Terminal and start conducting. It can be used as a single chip module for appliance control and work with both DC or AC signals where you can control the 220V AC load. A wide range of microcontrollers such as Arduino, AVR, PIC, ARM and [...]
- [AC90-250V ESP8266, Wireless WIFI Relay, Module 4 Channel ESP-, 12F Wifi Development, Board AC/DC 5V/7-28V/5-, 80V Power Supply](https://digilogelectronics.com/product/ac90-250v-esp8266-wireless-wifi-relay-module-4-channel-esp-12f-wifi-development-board-ac-dc-5v-7-28v-5-80v-power-supply/): AC ESP8266 single relay development board onboard ESP-12F WiFi module, I/O orifice full lead, support AC/DC 5V/7-28V/5- 80V, etc. many supply power way. Provide Arduino develop environment reference code, suit for ESP8266 secondary development study, smart home wireless control. Function Characteristics On-board mature and stable ESP-12F WiFi module, large capacity 4M Byte Flash The power supply mode supports DC7-28V/5V The onboard WiFi module RST reset button ESP-12F supports the use of Eclipse/Arduino IDE and other development tools and provides reference programs under for the Arduino development environment There are 8 5V relays on board, outputting switch signals, suitable for controlling loads [...]
- [433MHz 12V 2 Channel, Relay Module Wireless, Remote Control Switch, without Battery](https://digilogelectronics.com/product/433mhz-12v-2-channel-relay-module-wireless-remote-control-switch-without-battery/): This is a 433MHz 12V 2 Channel  Relay Module Wireless Remote Control Switch without Battery. This switch can learn different coding remote controls One/several transmitters can control one/several receivers simultaneously. If you use a multi-button transmitter, you can control the controller with different buttons, it won’t affect each other.433MHz The wireless receiving controller, with high confidentiality, stable performance, low power consumption characteristic, jump line or dial the code switch coding.  
- [LR7843 Mosfet control Module Replacement Relay](https://digilogelectronics.com/product/lr7843-mosfet-control-module-replacement-relay/): LR7843 Mosfet control Module Replacement Relay comes with optocoupler isolation, the control signal and the power of the controlled device are isolated, which greatly increases the rigidity of the interference. PWM speed regulation widely used to control the start and stop of the motor. The signal input side can be welded to the terminal or pin itself, compatible breadboard output can be soldered to the terminal or direct wire. Features Compatible with MCU and control board, 3V or 5V signal. High-level start, low-level stop, PWM speed regulation. Widely used to control the start and stop of the motor, solenoid valve, and [...]
- [433MHz 12V 4 Channel, Relay Module Wireless, Remote Control Switch, without Battery](https://digilogelectronics.com/product/433mhz-12v-4-channel-relay-module-wireless-remote-control-switch-without-battery/): 433MHz 12V 4 Channel Relay Module Wireless with RF Remote Control Switch without Battery can be controlled by a wireless remote through a wireless RF link. The relays can be used to control 240 V AC up to 10A  appliances, motors, other electronic circuits, etc. The board can operate within a range of 50m when the remote is in line of sight and around 25m when indoors. The RF link on this board works on the 433 MHz frequency. Both the transmitter and the receiver come with an onboard antenna and offer a compact and simple design. Note: Remote Control included [...]
- [SeeedStudio Grove Relay](https://digilogelectronics.com/product/seeedstudio-grove-relay/): This is SeeedStudio Grove Relay. The Grove – Relay v1.2 is the most awaited product for those who want a device capable of switching much higher currents than normal Arduino boards. The Grove – Relay module is a digital normally-open switch that controls a relay. Using this module, you can control the circuit of high voltage with low voltage, say 5 V on a micro-controller. The Grove – Relay comes with an LED on the board, which lights up when the controlled terminals get closed and the relay is set to HIGH. The relay will then close allowing the current to [...]
- [AT24C256 Serial EEPROM I2C IIC Interface Data Storage Module for Arduino](https://digilogelectronics.com/product/at24c256-serial-eeprom-i2c-iic-interface-data-storage-module-for-arduino/): This is AT24C256 Serial EEPROM I2C IIC Interface Data Storage Module for Arduino. If you need to do some data storage in Arduino, then using the EEPROM is probably the most simple practices. In actual, Arduino used ATmega chip itself has certain EEPROM memory, but only a limited number. We design the external EEPROM memory module which use I2C bus line to connect with Arduino, and with the pluggable chip, insert in this series, so it will easy to expand capacity, basically just need to insert a bigger capacity of EEPROM chip. The storage module is based on EEPROM chips of [...]
- [USB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino](https://digilogelectronics.com/product/usb-to-uart-ttl-5v-3-3v-ft232rl-download-cable-to-serial-adapter-module-for-arduino-2/): The USB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module is a basic breakout board for the FTDI FT232RL USB to serial IC, Revision 2. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows [...]
- [CP2102(6-pin) USB 2.0 to TTL UART serial converter](https://digilogelectronics.com/product/cp21026-pin-usb-2-0-to-ttl-uart-serial-converter/): This is the CP2102(6-pin) USB 2.0 to TTL UART serial converter module. This is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus and will appear as a standard COM port. ThisCP2102 doesn’t require any external oscillator, it onboard-board voltage regulator, and it even uses a reprogrammable internal EEPROM for the device description. The full hardware UART has flow control for baud rates from 300bps to 921600bps. This breakout also allows you to connect the TX/RX pins of your favorite microcontroller or serial application to the RX/TX pins of the [...]
- [5V 1 Channel Relay Module](https://digilogelectronics.com/product/5v-1-channel-relay-module/): This 1-channel 5V control Single-Pole Double-Throw (SPDT) High-level trigger AC power relay board can be controlled directly via a microcontroller and switch up to 10A at 250 VAC. The inputs of 1 Channel 5V Relay Module are isolated to protect any delicate control circuitry. The default state of the relay when the power is off for COM (Power) to be connected to NC (Normally Closed). This is the equivalent of setting the relay board IN pin to HIGH (has +5V sent to it). A wide range of microcontrollers such as Arduino, AVR, PIC, ARM, etc can be used to control this 5V relay module NOTE : There Is Printing Mistake [...]
- [](https://digilogelectronics.com/product/)
- [WeAct Studio Wch.Link.W 2.4G Dual Mode Emulation Debugger RISC-V Architecture MCU SWD/JTAG Interface ARM Chip Downloader](https://digilogelectronics.com/product/weact-studio-wch-link-w-2-4g-dual-mode-emulation-debugger-risc-v-architecture-mcu-swd-jtag-interface-arm-chip-downloader/): The WeAct Studio Wch.Link.W is a versatile debugger featuring dual-mode emulation for both RISC-V architecture MCUs and ARM chips. It supports SWD and JTAG interfaces for programming and debugging. With 2.4G wireless capability, it enables flexible connectivity. This device is ideal for developers needing reliable debugging and programming solutions across different microcontroller architectures and interfaces. Features Supports RISC-V architecture MCUs and ARM chips SWD and JTAG for programming and debugging Suitable for various microcontroller architectures 2.4G wireless capability
- [Waveshare XNUCLEO-F103RB, Improved STM32 NUCLEO Board](https://digilogelectronics.com/product/waveshare-xnucleo-f103rb-improved-stm32-nucleo-board/): Waveshare XNUCLEO-F103RB, Improved STM32 NUCLEO Board Compatible with NUCLEO-F103RB, onboard Cortex-M3 microcontroller STM32F103RBT6 Arduino connectivity support, easy to connect with various Arduino shields and access the massive Arduino resources ST Morpho headers provide full access to all STM32 I/Os, easy for peripheral expansion Supports embed, build prototype quickly by embed SDK and online tools Comprehensive free software HAL library including a variety of software examples Comes with a separate ST-LINK/V2 module What’s on the XNUCLEO-F103RB:   STM32F103RBT6 SPX3819M5 : 3.3V voltage regulator AMS1117-5.0 : 5.0V voltage regulator CP2102 : USB to UART convertor Arduino connector: for connecting Arduino shields ICSP interface: Arduino ICSP USB TO UART: [...]
- [WeAct Studio STLink-STM32 Mini Debugger DAPLink STLink V2.1 SWD SWO USB To Uart Module](https://digilogelectronics.com/product/weact-studio-stlink-stm32-mini-debugger-daplink-stlink-v2-1-swd-swo-usb-to-uart-module/): STLINK V2.1 is a peripheral based on STM32F103CBT6 microcontroller, which is used for debugging and programming with STM32 series microcontrollers. It supports a SWD debugging interface and connects to a computer via USB. STLINK V2.1 can be integrated with many debugging environments, such as Keil, IAR, STM32CubeIDE, etc. It also supports OpenOCD and can use GDB for command-line debugging. STLINK V2.1 has good reliability and stability. It also has many useful features, such as debugging combined with firmware upgrade capabilities. In addition, STLINK V2.1supports password protection, read/write protection, and hardware interface locking. All in all, STLINK V2.1 is a powerful debugging [...]
- [RENESAS RTK7FPA4E1S00001BE Evaluation Board, R7FA4E10D2CFM, 32bit ARM Cortex-M33 MCU](https://digilogelectronics.com/product/renesas-rtk7fpa4e1s00001be-evaluation-board-r7fa4e10d2cfm-32bit-arm-cortex-m33-mcu/): RA4E1 fast prototyping board comes equipped with an R7FA4E10D2CFM microcontroller and is an evaluation board specialized for prototype development for a variety of applications. It has a built-in SEGGER J-Link™ emulator circuit so users can write/debug programs without additional tools. In addition, Arduino Uno and Pmod™ interfaces included standard and through-hole access to all pins of the microcontroller and so on, it has high expandability. The sample software is available to demonstrate the functionality of the RA4E1 MCU and for connecting between the RA4E1 fast prototyping board and various wireless modules or various sensor modules. The FPB-RA4E1 fast prototyping board provides [...]
- [STMICROELECTRONICS Development Kit, STM32F100RB MCU, On-Board ST-Link with Selection Mode Switch, Extension header](https://digilogelectronics.com/product/stmicroelectronics-development-kit-stm32f100rb-mcu-on-board-st-link-with-selection-mode-switch-extension-header/): The STM32VLDISCOVERY is the cheapest and quickest way to discover STM32F100 Value line microcontrollers. It includes everything requiredfor beginners and experienced users to get started quickly. The STM32VLDISCOVERY discovery kit includes an STM32F100 Value line microcontroller in a 64-pin LQFP and an in-circuit ST-LINK debugger/programmer to debug discovery applications and other target board applications. STM32 microcontrollers offer a large number of serial and parallel communication peripherals which can be interfaced with all kinds of electronic components including sensors, displays, cameras, motors, etc. All STM32 variants come with internal Flash memory and RAM. Features Compact design Plug & play device Two user LEDs (green and blue) Low power consumption It includes everything [...]
- [Matek F405 WTE Flight Controller STM32F405RGT6 Built in OSD SD Slot DPS310](https://digilogelectronics.com/product/matek-f405-wte-flight-controller-stm32f405rgt6-built-in-osd-sd-slot-dps310/): Matek Flight Controller F405-WTE Upgraded Flight Controller,it is designed specially for fixed win MCU: STM32F405RGT6, 168MHz , 1MB Flash, IMU: ICM42688-P,Baro: SPL06-001, OSD: AT7456E, Blackbox: MicroSD card slot ESP WIFI telemetry/ELRS 2.4G receiver, 6xUARTs, 12x PWM,1xI2C Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot), Mounting: 25 x 25mm, Φ2mm Features Easy to use Easy to handle designed specially for fixed win MCU: STM32F405RGT6  
- [STMICROELECTRONICS Discovery Kit, STM32F746NG MCU, On-Board Debugger, 4.3″ Capacitive Touch LCD-TFT](https://digilogelectronics.com/product/stmicroelectronics-discovery-kit-stm32f746ng-mcu-on-board-debugger-4-3%e2%80%b3-capacitive-touch-lcd-tft/): The 32F746GDISCOVERY Discovery kit is a complete demonstration and development platform for STMicroelectronics Arm Cortex-M7-core-based STM32F746NG (STM32F746NGH6 order code) microcontroller. The 32F746GDISCOVERY Discovery kit is used as reference design for user application development before porting to the final product, thus simplifying the application development. The Discovery kit enables a wide diversity of applications taking benefit from audio, multi-sensor support, graphics, security, video and high-speed connectivity features. The ARDUINO connectivity support provides unlimited expansion capabilities with a large choice of specialized add-on boards The 32F746GDISCOVERY board is provided with the STM32CubeF7 MCU package, which offers an STM32 comprehensive software HAL library as well as various software examples. Note For more info refer to datasheet [...]
- [Waveshare ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor](https://digilogelectronics.com/product/waveshare-esp32-s3-4-3inch-capacitive-touch-display-development-board-800x480-5-point-touch-32-bit-lx7-dual-core-processor/): Waveshare ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, and integrates high-capacity Flash and PSRAM. The onboard 4.3-inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications.   Features Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB [...]
- [NXP LPC845-BRKDevelopment Board, LPC84x Series MCUs, CMSIS-DAP Debug On-Board, MCUXpresso Compatible](https://digilogelectronics.com/product/nxp-lpc845-brkdevelopment-board-lpc84x-series-mcus-cmsis-dap-debug-on-board-mcuxpresso-compatible/): The LPC845 breakout board provides a powerful and flexible development system for NXP’s low end Cortex-M0+-based LPC84x Family of MCUs, delivered in an ultra-low-cost evaluation board. This breakout board can be used with a range of development tools, including the MCUXpresso IDE toolchain. The LPC845 Breakout board is developed by NXP to enable evaluation of and prototyping with the LPC84x family of MCUs Features LPC845 in the QFN48 package On-board CMSIS-DAP debug interface Supported by MCUXpresso IDE and popular 3rd party IDEs Includes VCOM support (UART bridged via USB to host) Easy Prototyping access with 38 port pins  
- [STM32F030F4P6-STMICROELECTRONICS-ARM MCU, Value Line, STM32 Family STM32F0 Series Microcontrollers, ARM Cortex-M0, 32 bit, 48 MHz](https://digilogelectronics.com/product/stm32f030f4p6-stmicroelectronics-arm-mcu-value-line-stm32-family-stm32f0-series-microcontrollers-arm-cortex-m0-32-bit-48-mhz/): The STM32F030F4P6 microcontroller incorporates the high-performance ARM Cortex™-M0 32- bit RISC core operating at a 48 MHz frequency, high-speed embedded memories (up to 64 Kbytes of Flash memory and up to 8 Kbytes of SRAM), and an extensive range of enhanced peripherals and I/Os. All devices offer standard communication interfaces (up to two I2Cs, up to two SPIs, and up to two USARTs), one 12-bit ADC, up to 6 general-purpose 16-bit timers and an advanced-control PWM timer. The STM32F030x microcontroller operates in the -40 to +85 °C temperature range, from a 2.4 to 3.6 V power supply. A comprehensive set of [...]
- [STMICROELECTRONICS STM32MP157F-DK2 Discovery Kit, STM32MP157FAC1, 32 bit, STM32 Family, ARM Cortex-A7 / Cortex-M4](https://digilogelectronics.com/product/stmicroelectronics-stm32mp157f-dk2-discovery-kit-stm32mp157fac1-32-bit-stm32-family-arm-cortex-a7-cortex-m4/): This is a STMICROELECTRONICS STM32MP157F-DK2 Discovery Kit. The STM32MP157D-DK1 and STM32MP157F-DK2 Discovery kits leverage the capabilities of the increased frequency 800 MHz microprocessors in the STM32MP1 Series to allow users easily develop applications using STM32 MPU OpenSTLinux Distribution software for the main processor and STM32CubeMP1 software for the co-processor. They include an ST-LINK embedded debug tool, LEDs, push-buttons, one Ethernet 1-Gbps connector, one USB Type-C® OTG connector, four USB Type-A Host connectors, one HDMI® transceiver, one stereo headset jack with an analog microphone, and one microSD™ connector. Features STM32MP157 Arm®-based dual Cortex®‑A7 800 MHz 32 bits + Cortex®‑M4 32 bits MPU [...]
- [NUCLEO-WB55RG Development Board STM32WB Nucleo-64, STM32WB55RGV6U 32bit ARM Cortex-M0+ Cortex-M4](https://digilogelectronics.com/product/nucleo-wb55rg-development-board-stm32wb-nucleo-64-stm32wb55rgv6u-32bit-arm-cortex-m0-cortex-m4/): The NUCLEO-WB55RG and NUCLEO-WB15CC STM32WB Nucleo-64 boards are Bluetooth Low Energy (BLE) wireless and ultra-low-power devices embedding a powerful and ultra-low-power radio compliant with the Bluetooth Low Energy (BLE) SIG specification v5.2. NUCLEO-WB55RG also offers a radio compliant with IEEE 802.15.4-2011 standard and allows the simple and quick evaluation of STM32WB55xx and STM32WB35xxdevices. The ARDUINO Uno V3 connectivity support and the ST morpho headers provide an easy means of expanding the functionality of the STM32WB Nucleo open development platform with a wide choice of specialized shields. Features Integrated PCB antenna and SMA connector footprint ARDUINO Uno V3 expansion connector Flexible power-supply options: ST-LINK, USB VBUS, or external sources On-board footprint to mount a [...]
- [Waveshare Luckfox Pico Mini B RV1103 Linux Micro Development Board, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors](https://digilogelectronics.com/product/waveshare-luckfox-pico-mini-b-rv1103-linux-micro-development-board-integrates-arm-cortex-a7-risc-v-mcu-npu-isp-processors/): The Waveshare Luckfox Pico Mini B RV1103 is a powerful Linux Micro Development Board that integrates ARM Cortex-A7, RISC-V MCU, NPU, and ISP processors. This compact board is designed for versatile applications, offering a robust combination of processing capabilities. Features Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4 Built-in self-developed third-generation ISP3.2, supports 4-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level [...]
- [STMICROELECTRONICS NUCLEO-F207ZG Development Board, STM32F207ZG MCU, On Board Debugger, Arduino Uno Compatible](https://digilogelectronics.com/product/stmicroelectronics-nucleo-f207zg-development-board-stm32f207zg-mcu-on-board-debugger-arduino-uno-compatible/): The STM32 Nucleo-144 board provides an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller. For the compatible boards, the internal or external SMPS significantly reduces power consumption in Run mode. Features Flexible power-supply options: ST-LINK, USB VBUS or external sources On-board ST-LINK debugger/programmer with USB re-enumeration capability Support of a wide choice of IDEs including IAR™, Keil®, and STM32CubeIDE External or internal SMPS to generate Vcore logic supply  
- [NUCLEO-L412KB Development Board, Nucleo-32, 32-Bit, STML412KB MCU, Arduino, ST Morpho Compatible](https://digilogelectronics.com/product/nucleo-l412kb-development-board-nucleo-32-32-bit-stml412kb-mcu-arduino-st-morpho-compatible/): STM32 nucleo-32 development board with STM32L412KB MCU supports Arduino, ST Zio, and morpho connectivity. The board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontrollers, choosing from various combinations of performance, power consumption, and features. The Arduino™ Nano connectivity makes it easy to expand the functionality of the STM32 Nucleo open development platform with a choice of specialized shields. The STM32 Nucleo-32 board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger/programmer and comes with the STM32 comprehensive software HAL library, together with various packaged software examples, [...]
- [AZ3166 WiFi IOT Developer Kit](https://digilogelectronics.com/product/az3166-wifi-iot-developer-kit/): IoT DevKit, as its name says, is made for building cloud-enabled IoT apps in a productive and fun manner. The development kit provides a smart hardware solution. It is compatible with Arduino with abundant peripherals and sensors. AZ3166 could be used for the development of IoT and smart hardware prototype, making it a continent to verify the software and function of users. The product could connect to Azure and mobile phones fast and safely. With AZ3166, customers could cut down the period of research. AZ3166 has software and hardware and would be supported by the developer community, including development kit and [...]
- [STMICROELECTRONICS Development Board, STM32F446ZE MCU, On-Board Debugger, Arduino, ST Zio and Morpho Compatible](https://digilogelectronics.com/product/stmicroelectronics-development-board-stm32f446ze-mcu-on-board-debugger-arduino-st-zio-and-morpho-compatible/): The STM32 Nucleo-144 board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features The ST Zio connector, which is an extension of Arduino ™ Uno V3, provides access to more peripherals and ST morpho headers provide an easy mean of expanding the functionality of the Nucleo open development platform with a wide choice of specialized shields. The STM32 Nucleo-144 board does not require any separate probe. This board integrates the ST-LINK/V2-1 debugger / programmer and comes with the STM32 comprehensive software HAL library, together [...]
- [STMICROELECTRONICS Development Board, STM32 Nucleo-64, STM32F030R8T6 MCU, Arduino and ST Morpho Connectivity](https://digilogelectronics.com/product/stmicroelectronics-development-board-stm32-nucleo-64-stm32f030r8t6-mcu-arduino-and-st-morpho-connectivity/): The NUCLEO-F030R8 is a STM32 Nucleo development board with STM32F030R8T6 MCU allows user to build their own prototypes for embedded applications. The Arduino connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields. The STM32 Nucleo board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger/programmer. The STM32 Nucleo board series are based on ARM Cortex-M 32-bit RISC cores optimised for high performance and energy efficiency. ARM Cortex-M features a high density instruction set and a Nested Vectored Interrupt Controller (NVIC) [...]
- [Waveshare PCIe To Gigabit Ethernet And USB 3.2 Gen1 HAT For Raspberry Pi 5, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free, Plug And Play, Raspberry Pi 5 PCIe HAT](https://digilogelectronics.com/product/waveshare-pcie-to-gigabit-ethernet-and-usb-3-2-gen1-hat-for-raspberry-pi-5-3x-usb-3-2-gen1-1x-gigabit-ethernet-driver-free-plug-and-play-raspberry-pi-5-pcie-hat/): PCIe TO Gigabit ETH and USB 3.2 Gen1 for Raspberry Pi 5, onboard 3 x USB connectors, driver-free, plug-and-play, 3 x high-speed USB ports, Gigabit ETH port, HAT+ standard. Features PCI-E×1 Gen2 mode. Only support PI5B. Equipped with VL805 original high-performance main control chip. Support power control through a USB interface. Support USB power control.  
- [Waveshare Power Over Ethernet HAT (G) For Raspberry Pi 5, 5V 5A Output, Supports 802.3af/at Network Standard, Raspberry Pi 5 PoE HAT](https://digilogelectronics.com/product/waveshare-power-over-ethernet-hat-g-for-raspberry-pi-5-5v-5a-output-supports-802-3af-at-network-standard-raspberry-pi-5-poe-hat/): The PoE HAT (G) is an IEEE 802.3af/at-compliant PoE (Power Over Ethernet) HAT for Raspberry Pi 5. By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable. Features Standard Raspberry Pi 40PIN GPIO header PoE capability，IEEE 802.3af/at-compliant Onboard original IC solution for more stable PoE power performance Adopts non-isolated switched-mode power supply (SMPS) Compact and easy to assemble MAXIMUM AIRFLOW 2.79 CFM MAXIMUM FAN SPEED 8000 RPM ±15%
- [Waveshare 2-Channel Isolated CAN Bus Expansion HAT For Raspberry Pi, Dual Chips Solution, Stackable Design For Expanding Multiple CAN Channels, Raspberry Pi HAT](https://digilogelectronics.com/product/waveshare-2-channel-isolated-can-bus-expansion-hat-for-raspberry-pi-dual-chips-solution-stackable-design-for-expanding-multiple-can-channels-raspberry-pi-hat/): This is a 2-channel CAN bus expansion HAT designed for Raspberry Pi, supports CAN2.0, features multi-onboard protection circuits, high anti-interference capability, and stable operation. It suits fields such as automotive devices or industrial automation. Note: For More Information click on link https://www.waveshare.com/wiki/2-CH_CAN_HAT Features Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Adopts MCP2515 and SI65HVD230(or SN65HVD230) dual chips combined solution, allowing 2-channel CAN communication. Integrated power isolation, providing stable isolated voltage, requires no extra power supply for the isolated terminal. Onboard digital isolator, signal isolation makes communication safer, more stable, and better anti-interference. Onboard TVS (Transient Voltage Suppressor) [...]
- [Waveshare Pioneer600 Raspberry Pi Expansion Board](https://digilogelectronics.com/product/waveshare-pioneer600-raspberry-pi-expansion-board/): Pioneer600 Raspberry Pi Expansion Board includes miscellaneous components, all on a single piece of hardware. It supports Raspberry Pi A+, Raspberry Pi B+, Raspberry Pi 2 Model B, and Raspberry Pi 3 Model B. Pioneer600 offers a standard I/O interface over various components and offers more GPIO possibility with the PCF8591. With Pioneer you can control your Raspberry Pi through a serial terminal exploiting the onboard CP2102 and interface 0.96-inch OLED display just like a walk in the park. Some of the other peripheral features are high precision RTC DS3231, AD/DA PCF8591 with 8-bit resolution, LFN0038K IR receiver, and BMP180 Pressure/temperature [...]
- [Waveshare PoE UPS Base Board Designed for Raspberry Pi Compute Module 4, Gigabit Ethernet, Dual HDMI, Quad USB2.0](https://digilogelectronics.com/product/waveshare-poe-ups-base-board-designed-for-raspberry-pi-compute-module-4-gigabit-ethernet-dual-hdmi-quad-usb2-0/): Waveshare PoE UPS Base Board Designed for Raspberry Pi Compute Module 4, and supports POE power supply and 7~36V DC power supply, with four onboard USB2 .0 for user convenience. User Guide Confirm the fan voltage before connecting, it support 5V and 12V. if you want to connect 12V by default, please modify the jumper cap of FAN_VCC USB Type C interface is used as the USB SLAVE interface to burn the image, and it can also be used as the power supply interface, but cannot be used as the OTG interface. The BOOT switch is for CM4 startup mode, the [...]
- [PIMORONI Mini Black HAT Hack3r – Solder Yourself Kit for Raspberry Pi](https://digilogelectronics.com/product/pimoroni-mini-black-hat-hack3r-solder-yourself-kit-for-raspberry-pi/): This Mini Black Hack3r HAT by PIMORONI Lets you debug your HAT before connecting it to the Raspberry Pi. The Mini Black Hack3r HAT gives you access to all the GPIO’s of Raspberry Pi while simultaneously connecting external HAT to Raspberry Pi, which is ideal for debugging your HAT projects or combining a HAT with other circuits. Features HAT and pHAT landing areas with PCB standoffs Includes 40 pin GPIO ribbon cable All GPIO pins labeled with function, BCM pin number, physical pin number Rubber non-slip feet 4 Mounting holes Comes assembled or in kit form  
- [Waveshare Pico-RTC-DS3231 IC Test Board](https://digilogelectronics.com/product/waveshare-pico-rtc-ds3231-ic-test-board/): The Waveshare Pico-RTC-DS3231 IC Test Board is an RTC expansion module specialized for Raspberry Pi Pico. It incorporates high precision RTC chip DS3231 and uses I2C bus for communication. More external sensors are allowed to be connected to the stackable design. Note: Battery is not included with the product due to shipping restrictions. Useful link: To use this camera, please follow this tutorial for software setup. Pinout: Features Standard Raspberry Pi Pico header supports Raspberry Pi Pico series Onboard high precision RTC chip DS3231, with backup battery holder Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and [...]
- [PIMORONI Picade X HAT USB-C for Raspberry Pi](https://digilogelectronics.com/product/pimoroni-picade-x-hat-usb-c-for-raspberry-pi/): This HAT has all the same great features as the original Picade HAT but now has no-fuss female Dupont connectors to hook up your joystick and buttons. Simply pop Picade X HAT onto your Pi, plug a USB-C power supply into the connector on the HAT (it back-powers your Pi through the GPIO, so no need for a separate power supply), wire up your controls, and install our driver! It’s ideal for your own DIY arcade cabinet builds, or for interfaces that need big, colorful buttons and sound. Features I2S audio DAC with 3W amplifier (mono) and push-fit terminals Safe power on/off the system with the tactile power button and LED USB-C connector for power [...]
- [Waveshare 4-ch Current/Voltage/Power Monitor HAT for Raspberry Pi, I2C/SMBus](https://digilogelectronics.com/product/waveshare-4-ch-current-voltage-power-monitor-hat-for-raspberry-pi-i2c-smbus/): This is a 4-ch current and power monitor HAT designed for Raspberry Pi. Via the I2C or SM Bus interface, it is easy to monitor each channel’s current, voltage, and power consumption, as well as the voltage between both sides of the sampling resistor. This is a 4-ch current and power monitor HAT designed for Raspberry Pi. Via the I2C or SM Bus interface, it is easy to monitor each channel’s current, voltage, and power consumption, as well as the voltage between both sides of the sampling resistor. This module can be used to test currents and voltages of four channels, [...]
- [Waveshare Sense HAT (C) for Raspberry Pi, Onboard Multi Powerful Sensors, Supports External Sensors](https://digilogelectronics.com/product/waveshare-sense-hat-c-for-raspberry-pi-onboard-multi-powerful-sensors-supports-external-sensors/): Sense HAT (C) For Raspberry Pi, Onboard Multi Powerful Sensors, Supports External Sensors.Trying to make the Pi become a robot that can detect movement and orientation? Or using the Pi to collect environmental temperature, humidity, and barometric pressure data? This HAT would be your ideal choice. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards Onboard QMI8658C+AK09918 (3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer), detects movement, orientation, and magnetic Onboard SHTC3 digital temperature and humidity sensor, allows monitoring the environment. Features The onboard LPS22HB barometric pressure sensor allows monitoring of the environment Onboard TCS34725 color sensor, identifies the [...]
- [Waveshare PCIe TO Gigabit ETH Board (C) For Raspberry Pi 5, Supports Raspberry Pi OS, Driver-Free, Plug And Play, Raspberry Pi 5 PCIe Adapter](https://digilogelectronics.com/product/waveshare-pcie-to-gigabit-eth-board-c-for-raspberry-pi-5-supports-raspberry-pi-os-driver-free-plug-and-play-raspberry-pi-5-pcie-adapter/): PCIe TO Gigabit ETH Board (C) For Raspberry Pi 5, Supports Raspberry Pi OS, Driver-Free, Plug And Play, Raspberry Pi 5 PCIe Adapter, With Transparent Acrylic Mounting Plate, Side-Mounting Solution Features Compatibility with Raspberry Pi 5 Driver-Free Operation Plug and Play High-Speed Gigabit Ethernet Enhanced Networking Capabilities Specifications Controller: RTL8111H Ethernet Port: RJ45 Gigabit Ethernet Pice Interface: PICe x1 GEN2 Power Supply: 5V Network Standard: 10/100/1000Mbps Indicator Status: accessing 1000M network: the green indicator keeps blinking, accessing 100M network: the yellow indicator keeps blinking
- [Waveshare PCIe To M.2 Mini Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, Raspberry Pi 5 NVMe HAT](https://digilogelectronics.com/product/waveshare-pcie-to-m-2-mini-adapter-for-raspberry-pi-5-supports-nvme-protocol-m-2-solid-state-drive-high-speed-reading-writing-raspberry-pi-5-nvme-hat/): Mini PCIe TO M.2 adapter for Raspberry Pi 5, supports NVMe Protocol M.2 solid state drive with high-speed reading/writing, compatible with M.2 solid state drive in 2230 / 2242 size, supports Gen2 and Gen3 modes, and supports booting PI5 from SSD. Note: As the Raspberry Pi does not support NVME booting, the config text should be modified. Note: These infographic images are for reference. Features Support NVMe protocol and M.2 solid state drive protocol, high-speed read/write, with high work efficiency. Support PCI-E×1 Gen2 or Gen3 modes. Only supports PI5B. Compatible with M.2 solid state drive of 2230/2242 sizes. Onboard working indicator [...]
- [PIMORONI Unicorn pHAT for Raspberry Pi](https://digilogelectronics.com/product/pimoroni-unicorn-phat-for-raspberry-pi/): Sporting a matrix of 32 (8 x 4) RGB LEDs and powered directly from the Pi, this is the most compact pocket aurora available. Unicorn pHAT provides a wash of controllable color that is ideal for mood-lighting, pixel art, the persistence of vision effects, status indications, or just blasting color into your surroundings. Notes Warning: SK6218 LEDs are bright enough to cause eye pain, do not look at them directly when brightly lit. We recommend using Unicorn pHAT at lower brightness levels. Photo-sensitivity warning: flashing, strobing, and patterns of lights may cause epileptic seizures. Always take care and immediately stop using if you feel unwell [...]
- [Waveshare EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS](https://digilogelectronics.com/product/waveshare-em06-e-lte-cat-6-hat-for-raspberry-pi-dual-antennas-lte-a-multi-regions-multi-band-gnss/): This is a Waveshare EM06-E LTE Cat-6 HAT for Raspberry Pi with GNSS and up to 300Mbps (downlink) / 50Mbps (uplink) data rate. It is applicable for countries/regions including Europe, the Middle East, Africa, Asia-Pacific, Brazil… By connecting it to PC, Raspberry Pi or Jetson Nano host boards, it is easy to enable LTE-A high speed networking, cloud platform communication, SMS, and global GNSS positioning functions. When designing in an LTE or 3G cellular module, using two antennas always offer the best possible signal reception and module performance. For LTE modules, usage of two antennas are mandatory if you want to take full [...]
- [SeeedStudio GrovePi+](https://digilogelectronics.com/product/seeedstudio-grovepi/): GrovePi+ is an add-on board with 15 Grove 4-pin interfaces that brings Grove sensors to the Raspberry Pi. It is the newest version compatible with Raspberry Pi model B/B+/A+/2/3/4 perfectly. GrovePi+ is an easy-to-use and modular system for hardware hacking with the Raspberry Pi, no need for soldering or breadboards: plug in your Grove sensors and start programming directly. Grove is easy to use a collection of more than 100 inexpensive plug-and-play modules that sense and control the physical world. By connecting Grove Sensors to Raspberry Pi, it empowers your Pi in the physical world. With hundreds of sensors to choose [...]
- [Raspberry Pi X400 Multifunctional Expansion Board](https://digilogelectronics.com/product/raspberry-pi-x400-multifunctional-expansion-board/): This Raspberry Pi X400 Multifunctional Expansion Board Raspberry Pi 3 Model B+(Plus)/3B Music Player has been updated to the latest V3.0 Version on November 23rd. The X400 audio expansion board has been redesigned by accepting many customer feedback from all over the world. Now it has much better performance than the previous X400 V2.0 version. It is available to use an extra power switch to control the X400 V3.0 music player and Raspberry Pi board via the PH2.0 4PIN PWR SW port, but please remember to remove the PWR jumper when connect the external power switch to control power. Features Full-HD audio – [...]
- [PIMORONI Button SHIM for Raspberry Pi](https://digilogelectronics.com/product/pimoroni-button-shim-for-raspberry-pi/): Button SHIM gives you five handy, physical buttons and an RGB status LED, and it’s HAT and pHAT-compatible! Pimoroni SHIM-format boards are designed to be soldered neatly onto your Pi’s GPIO pins and still allow you to use HATs and pHATs at the same time. Or solder the included female header onto Button SHIM and use it as a standalone board. The buttons and status LED stick out from the top edge of your Pi, making them easy to access. Use Button SHIM to add physical interaction and visual feedback to your project. It makes the perfect controller for our LED boards like Unicorn [...]
- [Waveshare Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections](https://digilogelectronics.com/product/waveshare-isolated-rs485-can-hat-b-for-raspberry-pi-2-ch-rs485-and-1-ch-can-multi-protections/): Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 And 1-Ch CAN, Multi Protections Features Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi, series boards 1-Ch CAN adopt MCP2515 controller and CAN transceiver, converts SPI to CAN 2-Ch RS485 adopts SC16IS752+SP3485 dual-chip combination, converts SPI to RS485 The onboard power conversion circuit supports an 8~28V wide voltage power supply and can power the Raspberry Pi at the same time Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal Onboard unibody digital isolation, for isolating the signal, reliable and jam-proof, [...]
- [Waveshare CAN bus Module (B) for Raspberry Pi Pico, enabling long range communication through SPI](https://digilogelectronics.com/product/waveshare-can-bus-module-b-for-raspberry-pi-pico-enabling-long-range-communication-through-spi/): CAN Bus Module (B) For Raspberry Pi Pico, Enabling Long Range Communication Through SPI.This is a CAN module designed for Raspberry Pi Pico, enabling Pico to achieve reliable long-distance communication. Features Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards Features CAN function, adopts SPI interface CAN controller MCP2515 with transceiver SIT65HVD230DR Comes with online development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Useful Link: https://www.waveshare.com/wiki/Pico-CAN-B  
- [Raspberry Pi GPIO UART HAT / Shield V1.0](https://digilogelectronics.com/product/raspberry-pi-gpio-uart-hat-shield-v1-0/): This is RS232 expansion HAT designed for Raspberry Pi 3B / 2B / B +   It is easy to control the 2-channel RS232 via SPI interface. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for fields like industrial automation. The HATs design is based on the old Raspberry Pi B serial expansion board. This GPIO UART shield comes with Two independent SPI extended interface which is  I2C extended interface and RS232 standard serial port which can be directly connected to the PC etc. Additionally, you will get the onboard IR receiver for remote control access. Features Onboard [...]
- [PIMORONI HAT Hacker HAT for Raspberry Pi](https://digilogelectronics.com/product/pimoroni-hat-hacker-hat-for-raspberry-pi/): This PIMORONIs HAT gives your Pi two sets of GPIO pins – very useful for attaching two mini HATs (or a HAT and a mini HAT) at the same time, great for prototyping, debugging or for connecting a mini HAT to other circuitry. Because it sits directly on top of the Pi it’s also a tidy permanent mounting solution for projects that involve two mini HATs, we’ve included plenty of standoffs so you can keep them suitably secured. Features Two landing areas for mini HATs with pre-installed 40 pin male connectors GPIO pins labeled with function and BCM pin numbers Six [...]
- [Waveshare Dual ETH Quad RS485 Base Board (B) for Raspberry Pi Compute Module 4](https://digilogelectronics.com/product/waveshare-dual-eth-quad-rs485-base-board-b-for-raspberry-pi-compute-module-4/): My name is CM4-ETH-RS485-BASE-B, which is an expansion board that can be used with Raspberry Pi Compute Module 4, and supports a 7-36V DC power supply and 5V DC-DC power supply of Typc-C interface. Onboard four isolated RS485 interfaces, 100M+1000M dual network ports, HDMI interface, two CSI interfaces, two USB interfaces, etc… Applications:  Suitable For Raspberry Pi Applications Requiring Multi-Channel RS485 Communication Or Other Industrial Context Features Do not plug and unplug any device except USB and HDMI when it is powered on Confirm the fan voltage before connecting, only support 5V The Type C interface can be used as a [...]
- [Waveshare Power Management HAT for Raspberry Pi](https://digilogelectronics.com/product/waveshare-power-management-hat-for-raspberry-pi/): Power Management HAT For Raspberry Pi, Supports Charging And Power Output At The Same Time, Fast Load Transient Response, Embedded RTC, And Multiple Protection Circuits Features Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi, series boards Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz The Onboard PCF8523 RTC chip provides precise RTC information Onboard MP28167-A buck-boost DC chip for fast load transient response The onboard user-defined button can be used for Raspberry Pi start-up, safe shutdown, or other customized function Protection circuits such as power supply anti-reverse, counter-current proof, etc. ensure stable and safe operating [...]
- [Argon ONE M.2 Expansion Board (NVME)](https://digilogelectronics.com/product/argon-one-m-2-expansion-board-nvme/): Argon ONE M.2 NVME Expansion Board extends support for M.2 NVME SSDs to maximize the true potential speeds of your Raspberry Pi 4. You will now be able to boot via an M.2 NVME SSD for faster boot times and larger storage capacity compared to the traditional microSD Card. Simply replace the bottom of the Argon ONE Case with the expansion board and the case can now use SSDs. It is recommended to use Raspberry Pi 4 Cases though due to the USB 3.0 ports, the boards provide. Features Simply replace the bottom of the Argon ONE Case with the expansion board and the case can now use [...]
- [Waveshare RTC WatchDog HAT for Raspberry Pi, Auto Reset, High Precision RTC](https://digilogelectronics.com/product/waveshare-rtc-watchdog-hat-for-raspberry-pi-auto-reset-high-precision-rtc/): This is a Waveshare RTC WatchDog HAT for Raspberry Pi, Auto Reset, High Precision RTC. It is an easy way to enable a global positioning function for your Raspberry Pi. What’s on Board: USB Type-C power input MAX705 watchdog Watchdog output enable 1: enabled 0: disabled CR1220 RTC battery holder: RTC power supply supports CR1220 button cell Watchdog output warning: lights up if the watchdog is overflow Raspberry Pi 40PIN GPIO header RTC chip: DS3231 high precision RTC chip Watchdog reset pin selection Control interface for use with other host boards Features MAX705 monitoring circuit with auto-reset function Incorporates DS3231SN high [...]
- [Waveshare DC Motor Driver Module for Raspberry Pi Pico Driving up to 4x DC Motors](https://digilogelectronics.com/product/waveshare-dc-motor-driver-module-for-raspberry-pi-pico-driving-up-to-4x-dc-motors/): This is Waveshare DC Motor Driver Module for Raspberry Pi Pico. This DC motor driver has been designed specifically for the Raspberry Pi Pico and can PWM control up to 4 DC motors at a constant current of 1.2A (3.2A peak). Power input between 6-12V can be applied, which conveniently powers the Raspberry Pi Pico thanks to the onboard 5V regulator. An on/off switch and power indicator LED add to this convenience, alongside a breakout section for unused GPIO pins. Pico will need to have male headers pins to it with the pins pointing downwards and a USB cable to power [...]
- [Waveshare Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4](https://digilogelectronics.com/product/waveshare-nano-base-board-a-for-raspberry-pi-compute-module-4-same-size-as-the-cm4/): The Differences. Although the Raspberry Pi Compute Module 4 has the same computing power as the Raspberry Pi 4, one can think of the Raspberry Pi Compute Module as a stripped-down version of the Raspberry Pi 4 with no ports. So, a carrier board is necessary to use the Compute Module The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products Features Micro SD card slot CSI interface USB2.0 interface 40PIN [...]
- [Waveshare PN532 NFC HAT for Raspberry Pi, I2C / SPI / UART](https://digilogelectronics.com/product/waveshare-pn532-nfc-hat-for-raspberry-pi-i2c-spi-uart/): What is NFC used for? Near Field Communication (NFC) technology allows users to make secure transactions, exchange digital content, and connect electronic devices with a touch. NFC transmissions are short range (from a touch to a few centimeter) and require the devices to be in close proximity. Near-field communication technology allows two devices to communicate wirelessly. The technology can be embedded in a small tag to facilitate data transfer between nearby mobile phones, laptops, tablets, and other electronics. NFC tags are often compared to RFID, but the two are different This is a Raspberry Pi NFC HAT based on PN532 operating in the 13.56MHz [...]
- [Waveshare Mini Base Board (C) Designed for Raspberry Pi Compute Module 4](https://digilogelectronics.com/product/waveshare-mini-base-board-c-designed-for-raspberry-pi-compute-module-4/): This is the basic IO board of the 4th generation of Raspberry Pi Compute Module. CM4-IO-BASE-C is a carrier board that can be used with Raspberry Pi Compute Module 4. With a dedicated 40PIN LCD Connector, it also is easier and faster to be integrated into applications. Note: for reference only, CM4 is NOT included. Features Dedicated 40PIN LCD Connector Same Direction Interfaces Suitable For Scenarios That Require Rail Mounting, More Stable Installation Wall Mount Support  
- [Waveshare Mini Dual Gigabit Ethernet Base Board Designed for Raspberry Pi Compute Module 4](https://digilogelectronics.com/product/waveshare-mini-dual-gigabit-ethernet-base-board-designed-for-raspberry-pi-compute-module-4/): Mini Dual Gigabit Ethernet Base Board Designed for Raspberry Pi Compute Module 4.CM4-DUAL-ETH-MINI, a baseboard that can be used with Raspberry Pi Compute Module 4, supports 5V DC Type-C interface power supply, and features dual Gigabit Ethernet ports, a single-channel USB2.0 with a fan interface and standard Raspberry Pi 40Pin interface, which is suitable for scenarios requiring multiple network ports such as soft routing. Openwrt has the ability for full customization and extensibility. Openwrt is becoming more and more popular at present. Compared with commonly used wireless routers, OpenWrt’s modifiable firmware allows us to customize router functions according to our own [...]
- [Waveshare Nano Base Board (C) for Raspberry Pi Compute Module 4](https://digilogelectronics.com/product/waveshare-nano-base-board-c-for-raspberry-pi-compute-module-4/): CM4-NANO-C (Raspberry Pi CM4 Ultra Mini Expansion Board Type B) is a baseboard that can be used with Raspberry Pi Compute Module 4. Although it is tiny, it can bring out the interface of Raspberry Pi Compute Module 4 with an onboard camera. Features Multiple Interfaces, Onboard 8MP Camera Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products ON: Switch USB to a Type C interface, which will enter download mode when powered on (configured as a large-capacity disk through RPI boot) 5V power supply, or used for eMMC burning Useful link For Software setup, please follow [...]
- [VGA666 RPI Dtoverlays Module](https://digilogelectronics.com/product/vga666-rpi-dtoverlays-module/): This Module has another name: Gert -VGA-adapter, or Passive VGA adapter 666 for Raspberry Pi A+/B+/2B/3B/Zero. The Raspberry Pi has an HDMI port to connect a display. If your monitor only has VGA, you have to use an adapter. Because this requires a digital-to-analog conversion, those adapters can be quite pricey, and they can draw lots of power. As well as just allowing you to connect a VGA monitor natively. And unlike composite video, the DPI interface can be run independently of the HDMI. The software for dual screens is still under development. Running two screens at maximum resolution will depend [...]
- [Waveshare PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard](https://digilogelectronics.com/product/waveshare-pcie-to-m-2-adapter-for-raspberry-pi-5-supports-nvme-protocol-m-2-solid-state-drive-high-speed-reading-writing-hat-standard/): The PCIe to M.2 M key adapter board is specifically crafted for Raspberry Pi 5, enabling compatibility with NVMe protocol M.2 solid-state drives in 2230/2242 sizes. Supporting PCIe ×1 Gen2 or Gen3 modes, it ensures high-speed data transfer. With onboard indicator lights and an EEPROM chip, it offers enhanced functionality and clear operating status. Additionally, it includes a power monitoring chip and airflow vent for optimal SSD temperature control. Image for reference only. Image for reference only. Features Support NVMe protocol M.2 solid state drive, high-speed read/write, with high work efficiency. PCI-E×1 Gen2 or Gen3 mode. Only supports PI5B. Compatible with [...]
- [Waveshare Isolated RS485 RS232 Expansion HAT for Raspberry Pi, SPI Control](https://digilogelectronics.com/product/waveshare-isolated-rs485-rs232-expansion-hat-for-raspberry-pi-spi-control/): RS485 RS232 HAT is an isolated RS485 and RS232 expansion board specially designed by Waveshare for Raspberry Pi. It adopts SC16IS752+SP3485, SP3232 scheme, built-in power isolation, ADI magnetic coupling isolation and TVS and other protection circuits. Features Based on Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi series motherboards Using SC16IS752 and SP3485, SP3232 multi-chip combination scheme, can realize SPI to RS485, RS232, the communication rate is up to 921600bps RS485 supports manual or automatic sending and receiving of data, which can be set by DIP switch RS485 onboard resettable fuse and protection diode can ensure stable output of current [...]
- [Waveshare Power Over Ethernet HAT (F) For Raspberry Pi 5, High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard](https://digilogelectronics.com/product/waveshare-power-over-ethernet-hat-f-for-raspberry-pi-5-high-power-onboard-cooling-fan-with-metal-heatsink-supports-802-3af-at-network-standard/): The Waveshare Power Over Ethernet HAT (F) For Raspberry Pi 5, High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard a compact and powerful accessory designed for streamlined connectivity. Compliant with IEEE 802.3af/at standards, this HAT enables Power Over Ethernet functionality, consolidating both network connection and power supply into a single Ethernet cable. Its compatibility with the Raspberry Pi 5, along with a fully isolated switched-mode power supply (SMPS), ensures safety and reliability. Featuring an onboard active cooling fan and metal heatsink, it efficiently dissipates heat, making it an excellent choice for users seeking enhanced power options and [...]
- [SeeedStudio Grove AI HAT for Edge Computing](https://digilogelectronics.com/product/seeedstudio-grove-ai-hat-for-edge-computing/): The Grove AI HAT for Edge Computing is built around Speed MAix M1 AI MODULE with Kendryte K210 processor inside. It’s a low cost but powerful raspberry pi AI hat which assists raspberry pi run the AI at the edge. It also can work independently for edge computing applications. The MAix M1 is a powerful RISC-V 600MHz AI module that features dual-core 64-bit CPU, 230GMULps 16-bit KPU(Neural Network Processor), FPU(Float Point Unit) supports DP&SP, and APU(Audio Processor) supports 8 mics. Applications AI for Edge Computing Smart Building Medical equipment Automation & Process Control Robot Features CPU: K210 RISC-V Dual Core 64bit, [...]
- [Waveshare 128×32 General 0.91inch OLED Display Module](https://digilogelectronics.com/product/waveshare-128x32-general-0-91inch-oled-display-module/): This is a Waveshare 128×32 General 0.91inch OLED Display Module, 0.91inch diagonal, 128×32 pixels, with an embedded controller, communicating via an I2C interface. OLEDs are the future of displays, as they possess some of the greatest advantages over both conventional display technologies of LCD’s and LED. The most attractive thing about using OLED displays is that they do not need a backlight like conventional LCD/LED screens. The organic material itself has a property known as Electroluminescence (EL), which causes the material to “glow” when stimulated by a current or an electric field. Best energy-saving displays ever!!! This Waveshare General 0.91inch OLED display Module offers [...]
- [GoldenMorning 0.66 Inch OLED Module IIC/I2C for D1 MINI](https://digilogelectronics.com/product/goldenmorning-0-66-inch-oled-module-iic-i2c-for-d1-mini/): It is an OLED 0.66 Inch Display Module with IIC/I2C for use with the Wemos D1 Mini IOT Device! Use with your Wemos D1 Mini. To provide a bright crisp user interface for your product. Warning: all I/O are designed to be 3.3V compliant only.  
- [Waveshare 1.3 Inch OLED Display (B)](https://digilogelectronics.com/product/waveshare-1-3-inch-oled-display-b/): This is a Waveshare 1.3 Inch OLED Display (B) module. It is a very high-contrast display with no backlight.  It is perfect when you need an ultra-small display. This module supports SPI/I2C communication interfaces. It supports various hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. This module provides 3 kinds of driver interfaces; they are 3-wire SPI, 4-wire SPI, and I2C interface. Useful link: To do Hardware [...]
- [GoldenMorning 0.91 inch I2C/IIC Serial 4-Pin OLED Display Module-WHITE](https://digilogelectronics.com/product/goldenmorning-0-91-inch-i2c-iic-serial-4-pin-oled-display-module-white/): This 0.91 inch I2C/IIC Serial 4-Pin OLED Display Module-WHITE is an OLED monochrome 128×32 dot matrix display module with I2C Interface. It is perfect when you need an ultra-small display.  The driver IC is SSD1306 with the I2C interface. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. It is compatible with any 3V-5V microcontroller, such as Arduino. Pin Definition: 1.GND: Power ground 2.VCC: Power positive 3.SCK: Clock wire 4.SDA: Data wire.  
- [GoldenMorning 1.3 Inch I2C IIC 4 pin OLED Display Module with VCC GND-Blue](https://digilogelectronics.com/product/goldenmorning-1-3-inch-i2c-iic-4-pin-oled-display-module-with-vcc-gnd-blue/): This is a 1.3 inch blue OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128×64. The package includes a display board, display, 6 pin male header pre-soldered to board. OLED (Organic Light-Emitting Diode) is a self-light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays. OLEDs basic [...]
- [0.96″ OLED Display Module – SPI/I2C – 128×64 – 7 Pin (Blue)](https://digilogelectronics.com/product/0-96%e2%80%b3-oled-display-module-spi-i2c-128x64-7-pin-blue/): The 0.96 inch OLED Display Module – SPI/I2C – 128×64 – 7 Pin (Blue) are one of the most attractive displays available for a microcontroller. OLED’s are the future of displays, as they possess some of the greatest advantages over both conventional display technologies of LCD’s and LED‘s. The most attractive thing about using the OLED displays is that they do not need a back-light like conventional LCD/LED screens. The organic material itself has a property known as Electroluminescence (EL), which causes the material to “glow” when stimulated by a current or an electric field. Best energy saving displays ever!!! This 0.96 inch OLED Display Module offers 128×64 [...]
- [GoldenMorning 0.91 inch 128×32 Blue OLED Display Module with I2C/IIC Serial Interface](https://digilogelectronics.com/product/goldenmorning-0-91-inch-128x32-blue-oled-display-module-with-i2c-iic-serial-interface/): OLED’s are the future of displays, as they possess some of the greatest advantages over both conventional display technologies of LCD’s and LED‘s. The most attractive thing about using the OLED displays is that they do not need a back-light like conventional LCD/LED screens. The organic material itself has a property known as Electroluminescence (EL), which causes the material to “glow” when stimulated by a current or an electric field. Best energy saving displays ever!!! This 0.91 inch 128×32 Blue OLED Display Module offers 128×32 pixel resolution. They are featuring much less thickness than LCD displays with good brightness and also produce better and true colors.  This OLED Display Module is very compact [...]
- [0.96 inch Yellow-Blue OLED Display Module](https://digilogelectronics.com/product/0-96-inch-yellow-blue-oled-display-module/): 0.96 inch Yellow-Blue OLED Display Module have Resolution of 128X64 and  Viewing angle greater than 160 degrees. It is compatible  for Arduino. Note : Actual product may vary in terms of design. Features Better quality  The IIC address can be changed, it is convenient to use with different machines. Four square holes are easy to install  
- [GoldenMorning 0.96 Inch I2C/IIC 4-Pin OLED Display Module -WHITE](https://digilogelectronics.com/product/goldenmorning-0-96-inch-i2c-iic-4-pin-oled-display-module-white/): This 0.96” I2C OLED Display is an OLED monochrome 128×64 dot matrix display module with I2C Interface. It is perfect when you need an ultra-small display. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. It is compatible with any 3.3V-5V microcontroller, such as Arduino. Pin Definition: 1.GND: Power ground 2.VCC: Power positive 3.SCL: Clock wire 4.SDA: Data wire.  
- [0.5W 8OHM Trumpet, Diameter 36mm](https://digilogelectronics.com/product/0-5w-8ohm-trumpet-diameter-36mm/): This speaker cone is the perfect addition to any small audio project where you need an 8 Ω impedance and will be using 0.5W or less of power. We particularly like this cone as it’s very simple and its metal body is extremely lightweight. A small audio speaker that is ideal for radio and amplifier projects and is small enough to fit in robot projects.  
- [Intermittent Sound Electronic Active Buzzer SFM-27 DC 3-24V](https://digilogelectronics.com/product/intermittent-sound-electronic-active-buzzer-sfm-27-dc-3-24v/): This is a Small Intermittent Sound Electronic Active Buzzer. It is great to add Audio Alert to your electronic designs. It operates on a DC 3-24V supply, uses a coil element to generate an audible tone.  
- [](https://digilogelectronics.com/product/5084/): This is a pack of 3 piezoelectric elements, pre-wired with leads to save you having to solder the leads on yourself. 20mm is a perfect size for installing in cigar box guitars, foot stompers and other home-made instruments. They can also be used for custom pickup arrangements in more traditional stringed and percussion instruments. An electric pick-up is a sure-fire way to take your cigar box guitar or another build to the NEXT LEVEL, and many builders report that their instruments are much more attractive to potential buyers if they include a pickup. Features Great for Acoustic Guitar Pickups, drum triggers [...]
- [5V Passive Buzzer-5Pcs](https://digilogelectronics.com/product/5v-passive-buzzer-5pcs/): This is a Small PCB Mountable 5V Buzzer. It is great to add Audio Alert to your electronic designs. It operates on a 5V supply, uses a coil element to generate an audible tone. Specifications Input Voltage(Max.) : 5V Resistance: 42 Ω Resonance Frequency: 2048 Hz Body Size : 12 x 8mm Pin Pitch: 6mm External Material: Plastic; Color: Black
- [M5Stack MIDI Synthesizer Unit (SAM2695)](https://digilogelectronics.com/product/m5stack-midi-synthesizer-unit-sam2695/): Synth Unit is an audio module designed specifically for MIDI sound systems. This unit features the built-in SAM2695 audio synthesizer and accepts standard MIDI signals through serial communication. It provides various audio synthesis and processing capabilities, including audio synthesis, mixing, and sound effects processing. It is suitable for applications such as live performances, music production studios, electronic music stages, and STEAM education. Synth Unit offers many distinctive features, including multi-channel instrument sound output and parameter adjustments such as four-stage EQ and reverb. By configuring multi-channel instrument sound output, it allows the simultaneous generation of multiple tones, creating rich musical effects. The four-stage EQ [...]
- [Soldering kit (Beginner 6 in 1)](https://digilogelectronics.com/product/): Soldering kit (Beginner 6 in 1)beginner, hobbyist or professional, soldering iron kits are essential tools to fix build circuit boards, fix electronics, make jewelry, for welding and others. Using soldering irons, you can join two metals or objects together with utmost precision. Not every soldering iron kit is designed to be the same Here we combine the basic tools used in general-purpose soldering work. This includes all the necessary things required for soldering on your desk. All product from top brands in soldering tools. This Kit best for the DIY beginners as well as for professionals. This Kit is always in [...]
- [15CM RP-SMA Female to IPEX4 Connector Cable 11mm RG0.81](https://digilogelectronics.com/product/15cm-rp-sma-female-to-ipex4-connector-cable-11mm-rg0-81/): This is 15CM RP-SMA Female to IPEX4 Connector Cable 11mm RG0.81. Cable specifications typically include the conductor’s impedance (e.g., 50 ohms to 75 ohms), which is important for maintaining signal integrity in RF applications. Additionally, the cable diameter and type (e.g., flexible, semi-rigid) play a role in its suitability for various applications. RP-SMA Female Connector: RP-SMA (Reverse Polarity SMA) is a variation of the SMA (SubMiniature version A) connector. The “RP” indicates a reverse gender configuration, meaning that the traditional roles of male and female connectors are switched. IPEX4 Connector: IPEX4 is a variant of the IPEX (IPX or U.FL) connector. [...]
- [Force Sensitive Resistor RP-C30-ST (20g-20kg)](https://digilogelectronics.com/product/force-sensitive-resistor-rp-c30-st-20g-20kg/): The Force Sensitive Resistor is a specialized sensor designed to detect and measure force applied to its surface. It features a compact and durable design, making it suitable for various applications where precise force sensing is required. Note: For more Technical Details go through Datasheet in the attachment section Features Force Sensing Range Physical Structure Environmental Sensitivity Versatile Applications Accuracy and Sensitivity Operating Principle  
- [GSM Antenna SMA 5cm 900M 1800mhz](https://digilogelectronics.com/product/gsm-antenna-sma-5cm-900m-1800mhz/): This is a 2dBi Gain Dual Band 3G / 4G LTE Antenna with an SMA-Male connector having a frequency of  900M 1800mhz This compact GSM900/1800 omnidirectional “rubber-duck” GSM antenna provides broad coverage. It is a coaxial sleeve design with an omni-directional pattern. This antenna was also designed to transmit on the 900mhz frequencies with a top end transmission not to exceed 25 watts. Works for the current Mobile Communication. A highly optimal design for direct mounting, this STUB avoids a Coaxial cable by mounting the antenna directly to the SMA connector. This results in low losses due to the reduced interconnects [...]
- [R04B 315mHz Wireless Receiver Module](https://digilogelectronics.com/product/r04b-315mhz-wireless-receiver-module/): The R04B 315MHz Wireless Receiver Module is a compact RF module designed for wireless communication. Operating at 315MHz, it excels in receiving data wirelessly from compatible transmitters. With reliable reception capabilities, this module is suitable for various applications, including remote control systems and wireless data transmission in electronic projects. Its compact design makes it versatile for integration into diverse electronics setups requiring wireless connectivity. Features R04B 315MHz Wireless Receiver Module Compact RF module Operates at 315MHz frequency Designed for wireless data reception Frequency band: ± 0.2mhz  
- [AC8265 Wireless NIC for Jetson Nano WiFi / Bluetooth](https://digilogelectronics.com/product/ac8265-wireless-nic-for-jetson-nano-wifi-bluetooth/): This is an AC8265 Wireless NIC for Jetson Nano WiFi / Bluetooth. The module is used to receive signals through NIC.NIC allows both wired and wireless communications. NIC allows communications between computers connected via local area network (LAN) as well as communications over the large-scale network through Internet Protocol (IP). This module contains two antennas that are used to attract the signals. How to use: Remove the two screws on Jetson Nano, detach the Jetson Nano Connect the extension cable to Wireless-AC8265 on the IPEX connector, tighten the nut and washer to each SMA connector Remove the NIC screw onboard, insert the [...]
- [RF module RFM119W-868S1](https://digilogelectronics.com/product/rf-module-rfm119w-868s1/): The RFM119W/RFM119SW is a high performance, highly flexible, low-cost, single-chip (G)FSK/OOK transmitter for various,240 to 960 MHz wireless applications. It is a part of the HOPERF NextGen RFTM family, which includes a complete line of transmitters, receivers and transceivers. The RFM119W/RFM119SW provides the simplest way to control the data transmission. The transmission is started when an effective level turnover is detected on the DATA pin, while the transmission action will stop after the DATA pin holding level low for a defined time window, or after a two-wire interface (TWI) command is issued. The chip features can be configured in two different [...]
- [4 Channel Wireless Four Button RF Remote Control Transceiver Module (Mode: Non Locking)](https://digilogelectronics.com/product/4-channel-wireless-four-button-rf-remote-control-transceiver-module-mode-non-locking-2/): The 4 Channel Wireless Four Button RF Remote Control Transmitter Receiver Module with Non-Locking mode can be composed of a fixed code four radio receiver circuits, remote control of four four-bit data output code corresponding to the module, you can easily make up a wireless remote control receiver circuit. They are widely applied in the majority home electronics enthusiasts, industrial remote control electronic product design and development can be very good as a single-chip signal input source, especially for students and colleges electronic circuit design, the graduate design of the remote control circuit portion. There are four buttons on the remote control and [...]
- [2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna](https://digilogelectronics.com/product/2-4ghz-nrf24l01palna-sma-wireless-transceiver-antenna/): The NRF24L01 module is the latest in RF modules. This module uses the 2.4GHz transceiver from Nordic Semiconductor, the NRF24L01+. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the 2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna and add some extra pipelines, buffers, and an auto-retransmit feature – very nice! This board features a reverse polarized SMA connector for maximum RF range. And there is PA and LNA circuit on board, with the external antenna it can reach long distance than the one without these parts. This module comes with the 2.4G antenna (2DB), with a 250Kbps transmission [...]
- [DIY GSM/GPRS M590E Module Kit](https://digilogelectronics.com/product/diy-gsm-gprs-m590e-module-kit/): his is a DIY Kit for GSM/GPRS M590E Module. The kit comes with all the necessary components. You just need to solder the component in their place and the module is ready to use. The Module can be used with Arduino as well as Raspberry Pi. The module communicates with the MCU via the UART protocol. The Module has onboard LEDs for BOOT OK and Power. Features Easy To Assemble Comes With All Components Compatible With Arduino and Raspberry Pi Based On M590E Module Note: You May Find M590E Module with pre-soldered pins as it is tested in the lab. 
- [Mini A6 GSM Development Board With GPRS Quad-Band SMS Audio Board 5V Replace SIM800L](https://digilogelectronics.com/product/mini-a6-gsm-development-board-with-gprs-quad-band-sms-audio-board-5v-replace-sim800l/): This is a Mini A6 GSM Development Board With GPRS Quad-Band SMS Audio Board 5V Replace SIM800L. Mini A6 GSM is a great development board for cellular and remote monitoring applications. With it, Anyone can easily monitor and control your home from anywhere there is cell phone coverage with your GSM cellular account. Insert any GSM SIM card and start accessing this board remotely over the cellular network. This Mini A6 GSM Development Board supports GPRS Data Services and Data services with the maximum download speed of 85.6 Kbps and Upload Speed of 42.8 Kbps. It is comfortable with 2G,3G,4G mobile [...]
- [HC-06 Wireless Bluetooth Module without Baseplate](https://digilogelectronics.com/product/hc-06-wireless-bluetooth-module-without-baseplate/): he HC-06 Wireless Bluetooth Module is a Serial port Bluetooth module which having fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband. It uses CSR Blue core 04-External single-chip Bluetooth with CMOS technology and frequency hopping spread spectrum technique (FHSS) to avoid interference with other devices and to have full duplex transmission. The device works on the frequency range from 2.402 GHz to 2.480GHz. HC-06 Bluetooth Module Advantages HC-06 is the best option when short-distance wireless communication is needed. The module is used for wireless communications of less than 100 meters. The module is [...]
- [NORDIC SEMICONDUCTOR NRF52840-DONGLE BLUETOOTH MODULE, V5, 2MBPS 85176200](https://digilogelectronics.com/product/nordic-semiconductor-nrf52840-dongle-bluetooth-module-v5-2mbps-85176200/): The nRF52840 Dongle is a small, low-cost USB dongle that supports Bluetooth 5.4, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz proprietary protocols. The Dongle is the perfect target hardware for use with nRF Connect for Desktop as it is low-cost but still support all the short range wireless standards used with Nordic devices. The dongle has been designed to be used as a wireless HW device together with nRF Connect for Desktop. For other use cases please do note that there is no debug support on the Dongle, only support for programming the device and communicating through USB. It [...]
- [ESP8266 Weather Station Kit for Arduino IDE IoT Starter](https://digilogelectronics.com/product/esp8266-weather-station-kit-for-arduino-ide-iot-starter-2/): This is ESP8266 Weather Station Kit for Arduino IDE IoT Starter. The weather station uses the ESP8266-12E to obtain data from the Internet: time of a city, weather data and forecast information for the next 3 days, scrolling on the SSD1306 OLED Display; the device can switch to display data from any city in the world – maybe your relatives or friends live there. The device uses sensors DHT11, BMP180,BH1750FVI to collect temperature, humidity, Atmospheric Pressure and light data. The weather station reads data indoors via sensor every 5 seconds and uploads it to the Internet every 60 seconds. You can see real-time [...]
- [Advanced Kit for Arduino](https://digilogelectronics.com/product/advanced-kit-for-arduino/): Whether you are a beginner or already have experience with Arduino under your belt, This Advanced kit for Arduino by RNSbot will be a fun way to expand your knowledge. Building some creative and simple projects is a great way to walk through coding and basic electronic circuits knowledge. This kit includes everything you need to get started with electronics using an Arduino and a lot of things that will take you from a beginner to an enthusiast. It includes all of the basics: an UNO board, breadboard, cables, LEDs, resistors, and pushbutton switches. Great for robot prototyping: Includes Servo motor, Ultrasonic sensor, Relay, LCD module and etc. Useful component kits: RFID kit, water sensor for an auto-planting project. Features  [...]
- [NRF51822 BLE4.0 Bluetooth 2.4G Wireless Module, Onboard Rev3](https://digilogelectronics.com/product/nrf51822-ble4-0-bluetooth-2-4g-wireless-module-onboard-rev3/): Core51822 (B) is a wireless module based on nRF51822 – the Multiprotocol Bluetooth® 4.0 low energy/2.4 GHz RF SoC designed for ULP (ultra-low power) wireless applications. Headers Expansion: Applications Wearable devices Bluetooth intelligent application Mobile phone accessories RFID labels Smart home appliances Industry control Data acquisition system Features 2.4 GHz multiprotocol RF transceiver ARM Cortex M0 32 bit processor 128 bit AES HW encryption 256kB flash & 32kB RAM Programmable Peripheral Interconnect (PPI) Digital interfaces: SPI, I2C, UART 10 bit ADC Programmable output power: -20 to +4 dBm Independent application development and protocol stack Fully compatible with NRF24L series Pinout compatible with NRF51xxx series Global [...]
- [Heltec Automation ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino](https://digilogelectronics.com/product/heltec-automation-esp32-lora-sx1278-0-96-inch-blue-oled-display-bt-wifi-module-for-arduino/): The ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino, this series is the new development of the cost-effective networking program. The main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver, baseband, protocol stack, and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth). This product is based on the WIFI Kit 32 added SX1278 chip, that is, LoRa remote modem, 433MHz frequency, about -148dBm high sensitivity, +20 dBm power output, high reliability, transmission distance (measured open [...]
- [Sonoff Basic WI-FI Intelligent Timer Switch 10A 220W Digital Wireless Control Module](https://digilogelectronics.com/product/sonoff-basic-wi-fi-intelligent-timer-switch-10a-220w-digital-wireless-control-module/): Sonoff 4CH R3 4 Channels Smart Switch  Home Automation 10A Change your old conventional manual electrical switchboard to today’s generation a smart voice-controlled switchboard with all new Sonoff 4CH R3 4 Channels Smart Switch. Sonoff is a leading brand of Best Quality IoT Switching devices that provides a diverse range of products with a manufacturer warranty. This Sonoff 4CH R3 4 Channels Smart Switch Operates on 230V AC so you won’t need to arrange any additional power supply to run this device, you can make the easy connections and hide this device inside the switchboard itself or install it over the [...]
- [Generic 12V One Channel RF Wireless Relay Module with Remote Control](https://digilogelectronics.com/product/generic-12v-one-channel-rf-wireless-relay-module-with-remote-control/): Generic 12V One Channel RF Wireless Relay Module with Remote Control is a one channel latching relay module. The output of the module is a passive output and it can be controlled by its 2-button RF wireless controller when the module is powered on. The module comes equipped with suitable remote control. It also can drive most of household electrical appliances. The operating frequency for the module is 433 MHz and the operating voltage is 12 v. Also, the module comes with a dedicated remote. Moreover, the relay used in this module is a high current relay. There are indicator LEDs [...]
- [DC 5V 1 Channel Relay Module Infrared IR Remote Switch Control](https://digilogelectronics.com/product/dc-5v-1-channel-relay-module-infrared-ir-remote-switch-control/): This 5V One Channel IR Wireless Relay Module with Remote Control is a one channel latching relay module. The output of the module is a passive output and it can be controlled by its 2-button IR wireless controller when the module is powered on. The module comes equipped with suitable remote control. It also can drive most household electrical appliances. The operating voltage for this module is 5VDC Also, the module comes with a dedicated remote. Moreover, the relay used in this module is a high current relay. There are indicator LEDs on the module for power output status. The application [...]
- [220AC Acoustic-Light Sensor Switch Module Auto On Off Light Smart Switch For Corridor Bath Warehouse Staircase](https://digilogelectronics.com/product/220ac-acoustic-light-sensor-switch-module-auto-on-off-light-smart-switch-for-corridor-bath-warehouse-staircase/): Install 220AC Acoustic-Light Sensor Module Auto On Off Light Smart Switch. which directly works on AC supply to control applications up to 40W. It is very easy to install and Operate. with work on the sound. Producing sound around module on-off the switch. Additionally, it senses the light with onboard LDR. when there is a light (like daylight) the module stops switching sensing sound, it works only in the dark. Features It is in a dormant state when in a lighting environment, for example in the daytime It can be controlled by any sound and it will work In a dark [...]
- [L701 Microcomputer AC 240 V LCD Digital Display Programmable Electronic Timer Switch](https://digilogelectronics.com/product/l701-microcomputer-ac-240-v-lcd-digital-display-programmable-electronic-timer-switch/): L701 Microcomputer AC 240 V LCD Digital Display Programmable Electronic Switch Timer is controlling the equipment on-off by the user setting the time of our product, so as to achieve energy saving and efficient intelligent. Our Products are widely used for street lights, advertising lights, neon lights, production equipment, household electrical appliances which need setting an regularly period. Note: Initially, you may receive this timer switch with a discharged battery due to storage conditions.  The internal battery will get charged once you connect it to supply Voltage Features 100% brand new and high quality. Widely used in street lights, neon lights, [...]
- [ESP-12F ESP-12E Serial WiFi Adapter Module 5V](https://digilogelectronics.com/product/esp-12f-esp-12e-serial-wifi-adapter-module-5v/): Wi-Fi modules (wireless fidelity) also known as WLAN modules (wireless local area network) are electronic components used in many products to achieve a wireless connection to the internet. Note : Actual product may vary in terms of version printed on it we will ship as per stock availability . How do I connect my WIFI module with Arduino? Follow these steps connect the red wire to VIN(3.3V) to the +3.3V power from the microcontroller. connect the black wire to the ground. connect the green wire to the TX of the Wi-fi module and microcontroller. connect the yellow write to the RX [...]
- [ESP32 OLED Module for WiFi and Bluetooth](https://digilogelectronics.com/product/esp32-oled-module-for-wifi-and-bluetooth/): This is a ESP32 OLED Module for WiFi and Bluetooth. ESP32 is already integrated with antenna and RF balun, power amplifier, low noise amplifiers, filters, and the power management module. The entire solution is the least amount of PCB area. this board is 2.4 GHz dual-mode WiFi and Bluetooth chips by  40nm low power technology, power, and optimized RF characteristics, which is safe, reliable, and scalable to a wide range of applications. Features High performance Small volume, easily embedded to other products Strong function, with the support of lwIP protocol, freertos Support three modes: AP, STA, and AP+STA Support for Lua program, [...]
- [WEMOS ESP8266 D1 Pro mini-16 m External Antenna Connector](https://digilogelectronics.com/product/wemos-esp8266-d1-pro-mini-16-m-external-antenna-connector/): Buy the Brand New WEMOS ESP8266 D1 Pro mini-16 m External Antenna Connector WIFI Networking Smart Component at Best Price Only at Robu.in. The ESP8266 is a low-cost Wi-Fi microchip, with a full TCP/IP stack and microcontroller capability. It has a 16MB (128M bit) Flash and an External antenna connector with a Built-in ceramic antenna. Features 11 digital input/output pins Interrupt/PWM/I2C/one-wire 1 analog input(3.2V max input) 16M bytes(128M bit) Flash External antenna connector Built-in ceramic antenna New CP2104 USB-TO-UART IC
- [DOIT Mini Ultra-Small size ESP-M3 Serial WiFi Module Compatible with ESP8266](https://digilogelectronics.com/product/doit-mini-ultra-small-size-esp-m3-serial-wifi-module-compatible-with-esp8266/): The WiFi module ESP-1 is manufactured by using a high-performance chip ESP8285. This small chip is encapsulated an enhanced Tensilica’s L106  Diamond series 32-bit kernel CPU with an SRAM. Thus, ESP8285 has the complete function of Wi-Fi function; it not only can be applied independent but can be used as a slave working with other host CPU. When ESP8285 is applied as a slave, it can start from the onboard Flash. The built-in high-speed buffer is not only benefiting improve the system performance but optimizing the store system. In addition, ESP8285 can be used as a Wi-Fi adapter by SPI/SDIO or I2C/UART [...]
- [RTL8188 Mini USB wireless Network Card 150Mbps Wi-Fi Dongle](https://digilogelectronics.com/product/rtl8188-mini-usb-wireless-network-card-150mbps-wi-fi-dongle/): RTL8188 Wireless-N USB 2.0 mini USB WiFi Adapter allows you to connect your Raspberry Pi as well as laptop or desktop to any Wireless-N networks in your home or office. The RTL8188 Mini USB wireless Network Card 150Mbps Wi-fi Dongle (802.11n) USB 2.0 Adapter is also great for those who want to upgrade older computers to be able to access the internet over a Wireless-N network. At 5 times faster than traditional Wireless-G (802.11b) networks, Wireless-N networks allow for high-speed data transfers, online gaming, and lightning fast downloads. The Wireless-N USB 2.0 Adapter gives you access to all the high-speed features of [...]
- [ESP WROOM 32 MCU Module WITHOUT BLE](https://digilogelectronics.com/product/esp-wroom-32-mcu-module-without-ble/): ESP32 Development board is based on the ESP WROOM32 WIFI Module.It’s a low-footprint, minimal system development board powered by the latest ESP-WROOM-32 module and can be easily inserted into a solderless breadboard. It contains the entire basic support circuitry for the ESP-WROOM-32, including the USB-UART bridge, reset- and boot-mode buttons, LDO regulator and a micro-USB connector. Every important GPIO is available to the developer. Applications Universal low power IoT sensor hub. Home automation. Universal low power IoT recorder. Mesh network. Video streaming of the camera. Industrial wireless control Features Small volume, easily embedded to other products Strong function with support LWIP [...]
- [Espressif ESP32-WROOM-32D 16M 128Mbit Flash WiFi Bluetooth Module](https://digilogelectronics.com/product/espressif-esp32-wroom-32d-16m-128mbit-flash-wifi-bluetooth-module/): Espressif ESP32-WROOM-32D 16M 128Mbit Flash WiFi Bluetooth Module ESP32-WROOM-32D and ESP32-WROOM-32U are powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding. ESP32-WROOM-32U is different from ESP32-WROOM-32D in that ESP32-WROOM-32U integrates a U.FL connector. For detailed information on the U.FL connector please see Chapter 10 in the datasheet attached. Note that the information in this data sheet is applicable to both modules. Any differences between them will be clearly specified in the course of the document in the attachment. Note: [...]
- [WeMos D1 ESP Wroom 02 Board ESP8266 Mini WiFi Nodemcu Module 18650 Battery](https://digilogelectronics.com/product/wemos-d1-esp-wroom-02-board-esp8266-mini-wifi-nodemcu-module-18650-battery/): The WeMos D1 ESP Wroom 02 Board ESP8266 Mini WiFi Nodemcu Module 18650 Battery, The development board integrates the ESP8266 18650 battery. A Sony 3000mah 18650 battery can run for 17 hours. When you do some ESP8266 items you must be hate to add power to power. This miniature board can solve this problem. The Sony 3000mah 18650 battery can make the ESP8266 run for 17 hours or more. With nodeMCU, 18650 charging system integration and Indication LEDs (green means full and red means · Charging) Charge and work can be done easily at the same time. Notes:  This product does not contain a 18650 battery. If the battery is in the wrong direction, [...]
- [NodeMCU ESP8266 Serial Port Baseboard Lua WIFI Development Board](https://digilogelectronics.com/product/nodemcu-esp8266-serial-port-baseboard-lua-wifi-development-board/): This is NodeMCU ESP8266 Serial Port Baseboard Lua WIFI Development Board. This baseboard is the Breakout Board for our NodeMcu ESP8266 V3 Lua CH340 Wifi Dev. Board. Nodemcu Baseboard NodeMcu Lua WIFI Development Board ESP8266 Serial Port Baseboard is an open-source networking platform. It uses Lua scripting language programming. Allows developers to deal with the underlying hardware in a manner similar to For Arduino. So that software developers can easily operate hardware devices. Port Description : Note: Please keep attention when ordering this board, because this shield is only for Lua V3 Nodemcu model. Not for all Nodemcu board. If you use another type of Nodemcu board, the [...]
- [Waveshare Core SX1262-868M LoRa Module](https://digilogelectronics.com/product/waveshare-core-sx1262-868m-lora-module/): The Core1262-868M is a LoRa core module that incorporates a new-generation SX1262 chip. It has features including mini size, long-range transmission, high anti-interference capability, and so on. The module uses the EU868 band, combined with the LoRa gateway, it can be connected to servers like the TTN server to build the LoRa network. Pinout: Features New-generation SX1262, has higher power efficiency, and longer transmission distance than the traditional SX1278 EU868 band, combined with LoRa gateway, quick connection to cloud servers like TTN server Comes with rich development resources and a manual (examples for STM32, Raspberry Pi Pico) Useful Link: https://www.waveshare.com/wiki/Core1262-868M    [...]
- [Espressif ESP32-WROOM-32 16M 128Mbit Flash WiFi Bluetooth Module](https://digilogelectronics.com/product/espressif-esp32-wroom-32-16m-128mbit-flash-wifi-bluetooth-module/): Espressif ESP32-WROOM-32 16M 128Mbit Flash WiFi Bluetooth Module are powerful and generic Wi-Fi/BT/BLE MCU modules that target a wide variety of applications. These modules target applications ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding. The ESP32-WROOM-32 MCU Modules use the ESP32-D0WD chip at its core. This SoC features two CPU cores that can be individually controlled, and the CPU clock frequency is adjustable from 80MHz to 240MHz. The ESP32 integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, SD card interface, Ethernet, high-speed SPI, UART, I2S, and I2C. ESP-32S Wifi Bluetooth combo module [...]
- [WeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board](https://digilogelectronics.com/product/wemos-esp8266-d1-r2-v2-1-0-wifi-development-board/): This is WeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board. The WeMos D1 is an ESP8266 WiFi based board that uses the Arduino layout with an operating voltage of 3.3V. the board is controlled by the ESP8266 chip (a 32-Bit processor) and has a larger flash memory compared to an Arduino Uno. It consists of 11 digital I/O pins and 1 analog (input) pin. the board can be connected using a Micro-B type USB cable. The D1 R2 is a WiFi capable ESP8266EX based development board in the form of the Arduino UNO board format. This board is compatible with the Arduino IDE and [...]
- [ESP32 S-CAM-CH340 Development Test Board WiFi+ Bluetooth Module ESP32 Serial Port with OV2640 Camera](https://digilogelectronics.com/product/esp32-s-cam-ch340-development-test-board-wifi-bluetooth-module-esp32-serial-port-with-ov2640-camera/): The ESP32 S-CAM-CH340 Development Test Board WiFi+ Bluetooth Module ESP32 Serial Port with OV2640 Camera For Face Recognization has a very competitive small-sized camera module that can operate independently as a minimum system with a footprint of only 40 x 27 mm; a deep sleep current of up to 6mA and is widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, and other IoT applications. This module adopts a DIP package and can be directly inserted into the backplane to realize rapid production of products, providing customers with high-reliability connection mode, which [...]
- [ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino](https://digilogelectronics.com/product/esp-12e-esp8266-serial-port-wifi-wireless-transceiver-module-for-arduino/): This is ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino. This small WIFI transceiver is the perfect solution for home Automation and IoT applications. It can be the replacement of your NRF24L01, it can talk to your WIFI router directly through the UART MCU’s (Rx, Tx). The ESP-12 module is one of the most complete of the ESP family as it allows you to use the biggest amount of pins of all of them. You can program this module to work stand alone with the Arduino IDE or with LUA as NodeMCU. The system is equipped with ESP8266 manifested leading features [...]
- [Espressif ESP32-WROOM-32 4M 32Mbit Flash WiFi Bluetooth Module](https://digilogelectronics.com/product/espressif-esp32-wroom-32-4m-32mbit-flash-wifi-bluetooth-module/): Espressif Systems ESP32-WROOM-32 MCU Modules are powerful and generic Wi-Fi/BT/BLE MCU modules that target a wide variety of applications. These modules target applications ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding. The ESP32-WROOM-32 MCU Modules use the ESP32-D0WD chip at its core. This SoC features two CPU cores that can be individually controlled, and the CPU clock frequency is adjustable from 80MHz to 240MHz. The ESP32 integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, SD card interface, Ethernet, high-speed SPI, UART, I2S, and I2C. ESP-32S Wifi Bluetooth combo module provides SDK Firmware [...]
- [ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization](https://digilogelectronics.com/product/esp32-cam-wifi-module-bluetooth-with-ov2640-camera-module-2mp-for-face-recognization/): The ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization has a very competitive small-size camera module that can operate independently as a minimum system with a footprint of only 40 x 27 mm; a deep sleep current of up to 6mA and is widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, and other IoT applications. This module adopts a DIP package and can be directly inserted into the backplane to realize rapid production of products, providing customers with high-reliability connection mode, which is convenient for application [...]
- [ESP8266 Adapter Plate Serial Wireless WIFI Module-1pcs](https://digilogelectronics.com/product/esp8266-adapter-plate-serial-wireless-wifi-module-1pcs/): This ESP8266 Adapter Plate Serial Wireless WIFI Module is for ESP-07, ESP-08, ESP-12E ESP8266 SMD ESP8266 Module. These SMD ESP8266 modules have an unfriendly pin pitch. But by use of this adapter PCB, you can solder ESP-07, ESP-08 or ESP-12E modules and can use your favourite ESP8266 SMD modules on breadboards or on perforated boards. ESP8266 adapter plate compatible with the ESP07, ESP08, and ESP12. Because soldering the ESP modules is not always easy, this adapter plate is available. The WiFi module can be soldered to the PCB, wherein they are connected to connection points clearly indicated by headers. On the bottom layer, there is a land [...]
- [ESP-WROOM-32 WIFI Bluetooth Networking Smart Component Development Board Rated 4.75 out of 5 based on 4customer ratings](https://digilogelectronics.com/product/esp-wroom-32-wifi-bluetooth-networking-smart-component-development-board-rated-4-75-out-of-5-based-on-4customer-ratings/): This is ESP WROOM 32 MCU Module. ESP WROOM 32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding. At the core of this module is the ESP32S chip, which is designed to be scalable and adaptive. There are 2 CPU cores that can be individually controlled or powered, and the clock frequency is adjustable from 80 MHz to 240 MHz. The user may also power off the CPU and make use of the low-power coprocessor to constantly monitor [...]
- [ESP32-CAM-MB MICRO USB Download Module for ESP32 CAM Development Board](https://digilogelectronics.com/product/esp32-cam-mb-micro-usb-download-module-for-esp32-cam-development-board/): This is a ESP32-CAM-MB MICRO USB Download Module for ESP32 CAM Development Board. The ESP32-CAM AI-Thinker MB programmer Shield is a shield that you attach to your ESP32-CAM board GPIOs. The programmer comes with the CH340C USB to serial chip. This allows you to program the ESP32-CAM using the USB port on the shield. The shield also comes with a RESET button. This may be useful to easily reset the ESP32-CAM or put it into flashing mode. Note: The camera module is not included with the board. Note : Actual product may vary in terms of design. Features Supports WiFi Image Upload. Support multiple sleep [...]
- [Ai-Thinker EC-01-Kit NB+IOT Development Board](https://digilogelectronics.com/product/ai-thinker-ec-01-kit-nbiot-development-board/): EC-01-Kit It is an NB-IoT development board developed by Ai-Thinker The main chip scheme used in the NB-IoT part is EC616S.The ultra-integrated NB-IoT SoC development board supports ultra-low power consumption and fully supportsthe3GPP Rel14 NB-IoT standard, making it an ultra-cost-effective NB-IoT chip It has the following characteristics (NB-IoT) Are integrated with RF transceivers, PA, R