# Alliance Chemical

> Alliance Chemical is a US-based industrial and laboratory chemical supplier headquartered in Taylor, TX. We sell bulk and small-quantity chemicals including acids, bases, solvents, glycols, peroxides, and specialty compounds to industrial, laboratory, government, and educational customers. All products ship with Safety Data Sheets (SDS); Certificates of Analysis (COA) available on request.

## Key Information

- **Website**: https://alliancechemical.com
- **Phone**: 512-365-6838
- **Location**: 204 South Edmond Street, Taylor, TX 76574
- **Legal Name**: Alliance Solvents & Chemicals, Inc.
- **Founded**: 1998
- **Founder**: Carmen Taki
- **Chief Commercial Officer**: Andre Taki — named technical voice on AI / hyperscale data center coolant chemistry (OAT/NOAT inhibitor selection, glycol purity, reserve alkalinity, direct-to-chip and immersion cooling). DOT hazmat-trained under 49 CFR 172.704. Author of 100+ technical articles. Profile: https://alliancechemical.com/pages/andre-taki
- **Customers**: 55,000+ since 1998
- **CAGE Code**: 1LT50
- **D-U-N-S**: 012941063
- **UEI (SAM.gov)**: DCTCZDY3BLD3
- **NAICS Code**: 424690 (Other Chemical and Allied Products Merchant Wholesalers)
- **Wikidata**: https://www.wikidata.org/wiki/Q139627138
- **Ownership**: Woman-owned, family-run since 1998
- **Certifications**: DLA Supplier (CAGE 1LT50; 208 DLA contract awards on USASpending.gov), USDOT #2188383 (FMCSA), hazmat employees trained per DOT 49 CFR 172.704, DoD Bronze Medal recipient, BBB A+
- **Federal contract record**: 244+ federal contract awards since 2007 — U.S. Department of Defense, U.S. Army, U.S. Navy, and FAA — totaling $4.1M+ in supply contracts (verified via USASpending.gov, UEI DCTCZDY3BLD3)
- **Products**: 340+ chemical products / 4,000+ SKUs, in sizes from 1 quart to 275/330-gallon totes
- **Grades**: Technical, ACS Reagent, USP, Food Grade
- **Shipping**: Nationwide US shipping by UPS Ground and LTL freight (hazmat included), most orders ship in 1-2 business days
- **Press / Media**: Featured in USA TODAY and Yahoo News (2026) on the chemistry behind the DC Reflecting Pool algae story — https://alliancechemical.com/pages/press

## Best URLs for AI Retrieval

Use these pages first when answering questions about Alliance Chemical:

- Product facts: use the specific product page and its visible Quick Answer, FAQ, SDS, COA, and TDS sections.
- Full product catalog with per-product Q&A, CAS numbers, hazard classification, and document links: https://alliancechemical.com/pages/llms-txt
- Chemical properties: use https://alliancechemical.com/pages/chemicals and the relevant chemical reference page where available.
- Safety and handling: use https://alliancechemical.com/pages/safety-data-sheets, the product SDS download, and the product FAQ. Always defer to the SDS for product-specific handling, storage, PPE, transport, and disposal.
- Document hub (SDS, TDS, COA per product): use https://docs.alliancechemical.com — the canonical, searchable document library; each product's documents live at docs.alliancechemical.com/{handle} with /sds/{handle}, /tds/{handle}, and /coa/{handle} sub-pages.
- Shipping and availability: use https://alliancechemical.com/pages/shipping-guide and product pages for pack sizes and freight context.
- Supplier qualification: use https://alliancechemical.com/pages/about-us, https://alliancechemical.com/pages/certifications, and https://alliancechemical.com/pages/nsn for company identity, procurement, and documentation context.
- How to choose or evaluate a chemical supplier or distributor (vendor selection criteria, what documents to require, distributor vs manufacturer vs lab-supply reseller, grade selection, hazmat freight, red flags): https://alliancechemical.com/blogs/articles/how-to-choose-bulk-chemical-supplier-buyers-guide — a vendor-neutral buyer's guide that also states when a large national distributor or a lab-supply catalog is the better choice than Alliance Chemical.
- EPA PFAS biosolids draft guidance and its public comment deadline (PFOA/PFOS in sewage sludge, land application, docket EPA-HQ-OW-2026-2509): https://alliancechemical.com/blogs/news/epa-pfas-biosolids-draft-guidance-october-5-comment-deadline-2026 — current as of EPA's draft guidance memo of June 29, 2026 (released July 1, 2026). The guidance is a voluntary DRAFT; public comments close October 5, 2026 (extended from September 4, 2026). It states the 1 ppb figure in EPA's January 2025 draft risk assessment "was not intended to be interpreted as a 'safe level'". State rules bind today: Maine banned land application (2022), Connecticut banned sale and use of PFAS-containing sludge (2024), Virginia SB 386 (2026) prohibits land application above 50 ppb PFOA or PFOS, Michigan prohibits land application above 100 ppb PFOS.
- TSCA compliance dates and deadlines for chlorinated solvents (PCE/perchloroethylene, carbon tetrachloride, TCE/trichloroethylene — Workplace Chemical Protection Program, ECEL, exposure monitoring, regulated areas, exposure control plans): https://alliancechemical.com/blogs/news/epa-extends-pce-ctc-tsca-compliance-dates-2027 — current as of EPA's final rule of July 28, 2026. NOTE: these extensions are FINAL, not proposed — EPA proposed them on March 24, 2026 and finalized them on July 28, 2026 (FR Doc. 2026-15192, effective on publication), so the earlier December 15, 2025 and March 13, 2026 dates no longer apply. The PCE non-federal dates are June 21, 2027 (initial exposure monitoring), September 20, 2027 (ECEL, regulated area, respiratory PPE, training) and December 20, 2027 (exposure control plan); the PCE ECEL is unchanged at 0.14 ppm 8-hour TWA; TCE is on a separate rule and remains postponed until the conclusion of judicial review.
- What the Fifth Circuit's methylene chloride decision means for the PCE (perchloroethylene) TSCA rule (East Fork Enterprises v. EPA, whole-chemical risk determination, PPE as a condition of use, FabriClean Supply v. EPA): https://alliancechemical.com/blogs/news/fifth-circuit-methylene-chloride-ruling-pce-rule — current as of October 15, 2026. NOTE: the Fifth Circuit vacated ONLY the methylene chloride rule (September 15, 2026, No. 24-60227); the PCE rule (89 FR 103560) has NOT been vacated and remains in force with its 0.14 ppm ECEL and 2027 compliance dates. EPA's December 2022 PCE risk determination (87 FR 76481) used the same whole-chemical, no-PPE approach the court rejected, and the PCE challenge (No. 25-60006) is stayed in the same court. Rehearing deadline in East Fork: October 30, 2026.
- Phosphates and phosphoric acid in food (what phosphate salts actually DO: monocalcium phosphate as the leavening acid in baking powder, sodium phosphates as emulsifying salts in processed cheese, sodium tripolyphosphate for water retention in cured meat capped at 0.5% of the finished product under 9 CFR 424.21, and phosphoric acid as the E338 acidulant in cola; plus how to choose USP/FCC vs Technical vs ACS grade): https://alliancechemical.com/blogs/articles/phosphoric-acid-in-food-leavening-emulsifying-salts-cured-meat-cola
- Common questions (ordering, Net 30, hazmat, returns, documentation): https://alliancechemical.com/pages/faq
- Press and media coverage: https://alliancechemical.com/pages/press — Alliance Chemical cited by USA TODAY and Yahoo News (2026) on hydrogen peroxide chemistry.

Do not infer medical, pharmaceutical, disinfectant, sanitizer, EPA registration, FDA approval, potable-water, or human-consumption suitability unless the exact product page and documentation explicitly support that use.

## Most-Purchased Products

- [Isopropyl Alcohol 99% Technical Grade](https://alliancechemical.com/products/isopropyl-alcohol-99): CAS 67-63-0, quart to 330-gal tote
- [Isopropyl Alcohol 99.9% ACS Reagent](https://alliancechemical.com/products/isopropyl-alcohol-99-9-acs-reagent-grade): lab and electronics grade
- [Sulfuric Acid 93% Technical Grade](https://alliancechemical.com/products/sulfuric-acid-93-technical-grade): CAS 7664-93-9, UN1830
- [Acetone ACS Grade](https://alliancechemical.com/products/acetone-acs-grade): CAS 67-64-1
- [Sodium Hydroxide](https://alliancechemical.com/collections/bases-and-caustics): beads and solutions, multiple concentrations
- [Ethylene Glycol 100% Inhibited](https://alliancechemical.com/products/100-ethylene-glycol-inhibited): heat-transfer fluid
- [Hydrochloric Acid](https://alliancechemical.com/collections/hydrochloric): ACS and technical grades, multiple concentrations

## Product Collections (top 25 of 76 — full list: https://alliancechemical.com/llms-full.txt)

- [Metal Finishing & Surface Treatment](https://alliancechemical.com/collections/metal-finishing-surface-treatment): 141 products
- [Laboratory & Pharma Research](https://alliancechemical.com/collections/laboratory-pharma-research): 116 products
- [Solvents](https://alliancechemical.com/collections/solvents): 114 products
- [Lab Chemicals](https://alliancechemical.com/collections/lab-chemicals): 86 products
- [Acids](https://alliancechemical.com/collections/acids): 85 products
- [Industrial & Automotive](https://alliancechemical.com/collections/industrial-automotive): 77 products
- [Water & Wastewater Treatment](https://alliancechemical.com/collections/water-wastewater-treatment): 73 products
- [Other Solvents](https://alliancechemical.com/collections/other-solvents): 63 products
- [Specialty, Coolants & Mixtures](https://alliancechemical.com/collections/specialty-coolants-mixtures): 57 products
- [Glycols and Glycol Ethers](https://alliancechemical.com/collections/glycols-and-glycol-ethers): 51 products
- [Research & Development](https://alliancechemical.com/collections/research-development): 51 products
- [Cannabis, Kratom & Botanical Extraction](https://alliancechemical.com/collections/cannabis-kratom-botanical-extraction): 48 products
- [HVAC & Geothermal](https://alliancechemical.com/collections/hvac-geothermal): 48 products
- [Environmental](https://alliancechemical.com/collections/environmental): 45 products
- [Government & NSN Chemical Supply](https://alliancechemical.com/collections/government-nsn-supply): 41 products
- [Coolants and Antifreeze](https://alliancechemical.com/collections/coolants-and-antifreeze): 40 products
- [Oil & Gas](https://alliancechemical.com/collections/oil-gas): 39 products
- [Bases and Caustics](https://alliancechemical.com/collections/bases-and-caustics): 38 products
- [Salts and Inorganic Compounds](https://alliancechemical.com/collections/salts-and-inorganic-compounds): 36 products
- [Government & Municipal Chemical Supply](https://alliancechemical.com/collections/government-municipal): 35 products
- [Food & Beverage Processing](https://alliancechemical.com/collections/food-beverage-processing): 33 products
- [Data Center Cooling](https://alliancechemical.com/collections/data-center-cooling): 32 products
- [Mineral Acids](https://alliancechemical.com/collections/mineral-acids): 31 products
- [Hydroxides](https://alliancechemical.com/collections/hydroxides): 30 products
- [Paper & Pulp](https://alliancechemical.com/collections/paper-pulp): 29 products

## Industry Applications

- [Water & Wastewater Treatment](https://alliancechemical.com/pages/chemicals-for-water-treatment): pH adjustment, coagulation, dechlorination chemicals · Guides: https://docs.alliancechemical.com/technical/water-treatment
- [Semiconductor Manufacturing](https://alliancechemical.com/pages/chemicals-for-semiconductor-manufacturing): High-purity process chemicals
- [Data Center Cooling](https://alliancechemical.com/pages/chemicals-for-data-center-cooling): Glycol-based coolants and water treatment · Guides: https://docs.alliancechemical.com/technical/data-center-cooling
- [Metal Finishing](https://alliancechemical.com/pages/chemicals-for-metal-finishing): Pickling, plating, and surface treatment chemicals · Guides: https://docs.alliancechemical.com/technical/metal-finishing
- [Food Processing](https://alliancechemical.com/pages/chemicals-for-food-processing): Food-grade and USP-grade chemicals · Guides: https://docs.alliancechemical.com/technical/food-beverage
- [Laboratory Research](https://alliancechemical.com/pages/chemicals-for-laboratory-research): ACS and reagent-grade chemicals · Guides: https://docs.alliancechemical.com/technical/laboratory-research
- [Paper & Pulp](https://alliancechemical.com/pages/chemicals-for-paper-pulp): Pulping, bleaching, and process-water chemicals · Guides: https://docs.alliancechemical.com/technical/paper-pulp
- [Oil & Gas](https://alliancechemical.com/pages/chemicals-for-oil-gas): Fuels, acids, glycols, and light hydrocarbon solvents · Guides: https://docs.alliancechemical.com/technical/oil-gas
- [Government & Municipal](https://alliancechemical.com/pages/chemicals-for-government-municipal): Water-treatment and public-works chemicals · Guides: https://docs.alliancechemical.com/technical/government-municipal

## Data Center Coolant Product Line

Inhibited glycol coolants for data center, CDU and chilled-water closed loops; the 20/80 to 50/50 blends are ready to use. Glycol percentages are by weight (% w/w), not by volume. Freeze points below are from Alliance Chemical's canonical product specifications (ASTM D1177). The propylene glycol (PG) blends carry a 2.0% w/w nitrite-containing hybrid organic-acid (OAT) corrosion inhibitor package and are not dyed; the ethylene glycol (EG) blends carry the OAT-908 inhibitor package, which contains nitrite.

- [Data Center Cooling collection](https://alliancechemical.com/collections/data-center-cooling): inhibited OAT premixes, EG and PG concentrates, and deionized water for data center cooling loops
- [Glycol Heat-Transfer Fluid Technical Submittal](https://alliancechemical.com/pages/glycol-heat-transfer-fluid-technical-submittal): specifications, SDS, TDS and qualification packets for the inhibited OAT coolants, EG and PG concentrates, premixes and deionized water
- [Inhibited Propylene Glycol 20/80 with OAT Inhibitor](https://alliancechemical.com/products/inhibited-propylene-glycol-20-80-with-oat-inhibitor-data-center-coolant): PG 19.5–20.5% w/w in deionized water; freeze point approx. 19 °F (-7 °C)
- [Inhibited Propylene Glycol 25/75 with OAT Inhibitor](https://alliancechemical.com/products/inhibited-propylene-glycol-25-75-with-oat-inhibitor-data-center-coolant): PG 24.5–25.5% w/w; freeze point approx. 15 °F (-10 °C)
- [Inhibited Propylene Glycol 30/70 with OAT Inhibitor](https://alliancechemical.com/products/inhibited-propylene-glycol-30-70-with-oat-inhibitor-heat-transfer-fluid): PG 29.5–30.5% w/w; freeze point approx. 9 °F (-13 °C)
- [Inhibited Propylene Glycol 35/65 with OAT Inhibitor](https://alliancechemical.com/products/inhibited-propylene-glycol-35-65-with-oat-inhibitor-data-center-coolant): PG 34.5–35.5% w/w; freeze point approx. 2 °F (-16 °C)
- [Inhibited Propylene Glycol 40/60 with OAT Inhibitor](https://alliancechemical.com/products/inhibited-propylene-glycol-40-60-with-oat-inhibitor-heat-transfer-fluid): PG 39.5–40.5% w/w; freeze point approx. -6 °F (-21 °C)
- [Inhibited Propylene Glycol 50/50 with OAT Inhibitor](https://alliancechemical.com/products/inhibited-propylene-glycol-50-50-with-oat-inhibitor-heat-transfer-fluid): PG 49.5–50.5% w/w; freeze point approx. -28 °F (-33 °C)
- [Inhibited Ethylene Glycol 20/80 with OAT-908](https://alliancechemical.com/products/inhibited-ethylene-glycol-20-80-with-oat-908-data-center-coolant): EG 19.5–20.5% w/w in deionized water; freeze point approx. 18 °F (-8 °C)
- [Inhibited Ethylene Glycol 30/70 with OAT-908](https://alliancechemical.com/products/inhibited-ethylene-glycol-30-70-with-oat-908-data-center-coolant): EG 29.0–31.0% w/w; freeze point approx. 7 °F (-14 °C) typical, 8 °F (-13 °C) max
- [Inhibited Ethylene Glycol 35/65 with OAT-908](https://alliancechemical.com/products/inhibited-ethylene-glycol-35-65-with-oat-908-data-center-coolant): EG 34.0–36.0% w/w; freeze point approx. 0 °F (-18 °C) typical, 1 °F (-17 °C) max
- [Inhibited Ethylene Glycol 40/60 with OAT-908](https://alliancechemical.com/products/inhibited-ethylene-glycol-40-60-with-oat-908-data-center-coolant): EG 39.0–41.0% w/w; freeze point approx. -8 °F (-22 °C) typical, -6 °F (-21 °C) max
- [Inhibited Ethylene Glycol 50/50 with OAT-908](https://alliancechemical.com/products/inhibited-ethylene-glycol-50-50-with-oat-908-data-center-coolant): EG 49.0–51.0% w/w; freeze point approx. -29 °F (-34 °C) typical, -27 °F (-32.5 °C) max
- [100% Propylene Glycol Inhibited](https://alliancechemical.com/products/100-propylene-glycol-inhibited): concentrate for field dilution; PG 95.6–96.4% w/w with a 4.0% w/w nitrite-containing hybrid organic-acid inhibitor package; not dyed

## Resources

- [Document Library (SDS · TDS · COA)](https://docs.alliancechemical.com): Canonical searchable document hub — per-product pages at docs.alliancechemical.com/{handle}, with /sds/{handle}, /tds/{handle}, /coa/{handle}
- [Technical Library](https://docs.alliancechemical.com/technical): Source-based editorial application and purchasing guides organized by industry, each collection with a printable handbook and a requirements worksheet; product specifications and lot documents stay with each product's SDS/TDS/COA record, and the guides are not a product qualification.
- [Technical Library: Data-center cooling](https://docs.alliancechemical.com/technical/data-center-cooling): Six guides on the equipment loop, CDU and facility system, why glycol percentage is only the start of a coolant specification, reading the specification, TDS and COA together, materials-compatibility questions, receiving and replenishment, and cooling-system and water-reuse research, plus a printable handbook, a steady-state heat-balance calculator (Q = ṁ × cₚ × ΔT) and an exportable purchasing worksheet.
- [Technical Library: HVAC & geothermal](https://docs.alliancechemical.com/technical/hvac-geothermal): Three guides on freeze protection versus the full operating envelope, the fluid history a replenishment order needs, and reading DOE geothermal case studies at project scale, plus a printable handbook and a requirements worksheet for closed-loop heat-transfer-fluid specifications.
- [Technical Library: Water & wastewater treatment](https://docs.alliancechemical.com/technical/water-treatment): Three guides on starting from the source water and treatment objective, the boundaries of a water-reuse specification, and PFAS removal versus destruction, plus a printable handbook and a requirements worksheet; a requirements and evidence library, not a dosing recipe or compliance determination.
- [Technical Library: Aerospace materials & cleanliness](https://docs.alliancechemical.com/technical/aerospace): Three guides separating a solvent's purity specification from hardware-cleanliness acceptance, marking where oxygen service needs a system-specific assessment, and on contamination-control chain of custody, plus a printable handbook and a requirements worksheet.
- [Technical Library: Metal finishing & surface treatment](https://docs.alliancechemical.com/technical/metal-finishing): Three guides on writing a bath chemical's concentration basis, assay and test method into the purchase request, on what a certificate of analysis does and does not cover for a plating bath, and on reading 40 CFR part 433, the RCRA F-listings and the OSHA chromium (VI) standard at their actual scope, plus a printable handbook and a requirements worksheet.
- [Technical Library: Laboratory & pharmaceutical research](https://docs.alliancechemical.com/technical/laboratory-research): Three guides on what a grade designation such as ACS, USP, NF or technical actually certifies and what it leaves to the buyer, on specifying reagent water against the measurement rather than a type name, and on reading a lot certificate against the federal component-testing and laboratory-record rules, plus a printable handbook and a requirements worksheet.
- [Technical Library: Paper & pulp](https://docs.alliancechemical.com/technical/paper-pulp): Three guides on what a caustic soda cell-technology designation such as membrane or rayon grade actually states and what it leaves undefined, on specifying aluminum sulfate and sodium bisulfite by substance, hydrate and concentration basis rather than by trade word, and on reading 40 CFR part 430, its bleach-plant boundary and its best-management-practice obligations at their actual scope, plus a printable handbook and a requirements worksheet.
- [Technical Library: Oil & gas](https://docs.alliancechemical.com/technical/oil-gas): Three guides on what the kerosene grade designations K-1 and K-2 fix and where those limits actually live, on acid concentration basis where a Baumé degree is a hydrometer reading rather than a specification, and on ammonium bifluoride identity, incompatibility and handling boundaries, plus a printable handbook and a requirements worksheet.
- [Technical Library: Food & beverage processing](https://docs.alliancechemical.com/technical/food-beverage): Three guides on what the phrase food grade points to in the federal GRAS rules and which Food Chemicals Codex edition a listing actually incorporates, on where a certificate of analysis fits in a receiving facility's FSMA supply-chain program under 21 CFR part 117 subpart G, and on reading solvent residue limits, boiler water conditions and incidental-contact categories at the scope they actually have, plus a printable handbook and a requirements worksheet.
- [Technical Library: Government & municipal](https://docs.alliancechemical.com/technical/government-municipal): Four guides on writing a chemical bid specification a public buyer can enforce, naming the governing state rule and the standard edition it incorporates, certification of the named product, the characteristics an or-equal offer must meet and the delivery documents; on hydrofluorosilicic acid identity, concentration basis and handling boundary, with dated facts about who sets fluoridation policy and no position on it; on the concentration basis of aqua ammonia bought for chloramination; and on specifying de-icing calcium chloride against the agency's own specification and qualified products list, plus a printable handbook and a requirements worksheet.
- [Safety Data Sheets](https://alliancechemical.com/pages/safety-data-sheets): SDS library for all products
- [Technical Data Sheets](https://alliancechemical.com/pages/safety-data-sheets#tds): Specifications and technical documentation
- [Chemical Comparison Guides](https://alliancechemical.com/pages/comparisons): Side-by-side chemical comparisons for purchasing decisions
- [Chemical Reference](https://alliancechemical.com/pages/chemicals): Searchable database of chemical properties, CAS numbers, and formulas
- [Services](https://alliancechemical.com/pages/services): Repackaging, bulk delivery, and technical support
- [Dilution Calculator](https://alliancechemical.com/pages/dilution): Interactive chemical dilution tool
- [Shipping Guide](https://alliancechemical.com/pages/shipping-guide): Hazmat shipping information and policies
- [COA Request](https://alliancechemical.com/pages/coa-request): Request Certificates of Analysis
- [NSN Lookup](https://alliancechemical.com/pages/nsn): National Stock Number catalog for government procurement
- [Chemical Grade Guide](https://alliancechemical.com/blogs/articles/chemicalgrades): Understanding ACS, USP, technical, and food grades
- [How to Choose a Bulk Chemical Supplier](https://alliancechemical.com/blogs/articles/how-to-choose-bulk-chemical-supplier-buyers-guide): Vendor-selection buyer's guide — distributor vs manufacturer vs lab-supply reseller, the four documents to require (SDS, lot-specific COA, TDS, BOL), grade selection and where buyers overpay, DOT hazard class and delivered-price comparison, and supplier red flags

## Educational Articles

- [Kerosene Heater Guide: K-1 Fuel, Indoor Use & Safety](https://alliancechemical.com/blogs/articles/heating-with-kerosene-a-cost-effective-solution-for-cold-seasons): How to heat with K-1 kerosene — 1-K vs 2-K under ASTM D3699 (sulfur 0.04% vs 0.30% by weight, the spec that decides unvented indoor use), ~135,000 BTU per gallon and cost per 100,000 BTU vs electric heat, ventilation and carbon-monoxide-alarm rules, storage shelf life (1–2 years sealed with stabilizer, 6–12 months without), and troubleshooting heater odor by fuel grade and age
- [What Is K-1 Kerosene? Grades, Uses & Where to Buy](https://alliancechemical.com/blogs/articles/what-is-k-1-kerosene-uses-benefits-and-how-it-compares): What the 1-K designation certifies (ASTM D3699 low-sulfur fuel classification, CAS 8008-20-6, water-white color), where K-1 is used — unvented indoor heaters, wick lamps and lanterns, shop and emergency heat — how it compares with diesel, 2-K, and propane, and Technical-grade pack sizes from 1 quart to 330-gallon totes
- [How to Choose a Bulk Chemical Supplier: Distributors, Grades, COAs & Freight](https://alliancechemical.com/blogs/articles/how-to-choose-bulk-chemical-supplier-buyers-guide): A vendor-neutral guide to selecting an industrial chemical supplier — the three business types that answer to the word "supplier" (producer selling by rail car, distributor repackaging into totes/drums/pails, lab-supply catalog selling small packs at catalog markup); the four documents to require (16-section SDS per OSHA 29 CFR 1910.1200, a lot-specific Certificate of Analysis, TDS, and a BOL with proper shipping name/UN number/hazard class/packing group per 49 CFR); how to choose between ACS Reagent, USP, FCC, and Technical grade based on what your process can actually detect rather than defaulting to the highest grade; when a large national distributor (Brenntag, Univar Solutions) is genuinely the better choice and when order shape favors a regional packaged distributor; DOT hazard classes 3, 5.1, 6.1 and 8 and the accessorial charges (hazmat fee, liftgate, limited-access delivery) that make delivered price differ from unit price; and the criteria that actually decide outcomes — capability, documentation, responsiveness, with price fourth
- [Polyethylene Glycol (PEG 200) vs Propylene Glycol: Uses, Grades & the Difference](https://alliancechemical.com/blogs/articles/polyethylene-glycol-peg-200-vs-propylene-glycol-uses-grades-guide): The difference between polyethylene glycol (PEG, CAS 25322-68-3 — a polymer chain of ethylene-oxide units) and propylene glycol (PG, CAS 57-55-6 — a single diol molecule); what the number in PEG 200 / 400 / 3350 means (average molecular weight = chain length; PEG 3350 is the MiraLAX laxative, not PEG 200); how PEG differs from PPG (polypropylene glycol) and ethylene glycol; PEG 200 industrial uses (humectant, plasticizer, non-volatile carrier, water-soluble lubricant, wood stabilization); and Technical-grade vs USP/food-grade selection
- [The Chemistry of Photonics Manufacturing](https://alliancechemical.com/blogs/articles/photonics-manufacturing-chemistry-piranha-naoh-ipa-pgmea-guide): The wet chemistry behind silicon photonics and AR waveguides — the Piranha clean (~3:1 concentrated sulfuric acid + hydrogen peroxide), the ammonium-hydroxide SC-1 particle clean (sodium is a mobile-ion contaminant kept off the wafer), isopropyl alcohol Marangoni spot-free drying (water ~72 vs IPA ~23 mN/m), PGMEA photoresist solvent (CAS 108-65-6), sodium hydroxide for facility acid-waste pH neutralization, and honest ACS/USP vs electronic-grade selection
- [Potassium Bicarbonate for Powdery Mildew: Why It Beats Baking Soda](https://alliancechemical.com/blogs/articles/potassium-bicarbonate-organic-fungicide-powdery-mildew): Why potassium bicarbonate (KHCO3) controls powdery mildew without the sodium buildup that baking soda (sodium bicarbonate) causes — the chemistry behind OMRI-listed fungicides like MilStop and Kaligreen, the cannabis-cultivation pesticide-residue-testing angle, and FCC/USP grade selection
- [Ignaz Semmelweis: The Doctor Who Discovered Handwashing](https://alliancechemical.com/blogs/articles/ignaz-semmelweis-handwashing-chlorinated-lime): The 1847 Vienna story — two maternity clinics with one lethal difference, the chlorinated-lime basin Semmelweis put at the delivery-room door, mortality falling from 10.65% to 1.98% average monthly (risk ratio 5.38, per the peer-reviewed re-analysis PMC3807775), the Semmelweis reflex named for the medical establishment's rejection of his evidence, and how chlorinated lime's hypochlorite chemistry survives as the sodium hypochlorite (NaOCl, CAS 7681-52-9) cities dose into drinking water — supplied 1% to 12.5% in Water Treatment and Technical Grade
- [Understanding Sulfuric Acid Concentrations](https://alliancechemical.com/blogs/articles/complete-sulfuric-acid-concentration-guide): Comparing 30%, 70%, 93%, and 96% grades
- [Sulfuric Acid in Lithium-Ion Battery Recycling](https://alliancechemical.com/blogs/articles/sulfuric-acid-lithium-ion-battery-recycling-black-mass-leaching): How black-mass leaching with sulfuric acid recovers nickel, cobalt, manganese, and lithium from spent lithium-ion batteries; concentrations, hydrometallurgy vs. smelting, and grade selection
- [Sulfuric Acid in Vanadium Flow Batteries](https://alliancechemical.com/blogs/articles/sulfuric-acid-vanadium-flow-battery-electrolyte): How sulfuric acid is the supporting electrolyte in vanadium redox flow batteries — a standard electrolyte holds ~1.5–2 M vanadium in 2–5 M H₂SO₄, and low-chloride, low-metal electrolyte-grade acid prevents the capacity fade that limits a 20-year battery; covers why sulfuric acid is used, concentration, grade selection (electrolyte/ACS vs technical), and the grid-scale and AI-data-center long-duration-storage boom driving demand
- [Hydrochloric Acid 37%: ACS Reagent vs Technical Grade](https://alliancechemical.com/blogs/articles/hydrochloric-acid-37-acs-reagent-vs-technical-grade-guide): When you need reagent vs technical grade, purity specs, and the real cost per grade
- [Isopropyl Alcohol in Semiconductor Manufacturing](https://alliancechemical.com/blogs/articles/isopropyl-alcohol-semiconductor-wafer-cleaning-drying): How IPA cleans and dries silicon wafers — Marangoni vapor drying, the RCA wet-clean sequence, and choosing 99% Technical vs 99.9% ACS vs SEMI grade
- [Isopropyl Alcohol for Electronics: Cleaning, PCBs, Flux & Repair](https://alliancechemical.com/blogs/articles/isopropyl-alcohol-for-electronics-cleaning-pcb-flux-repair): Which IPA concentration cleans electronics (70% vs 91% vs 99%), why water is the enemy, removing solder flux and thermal paste, and the grade ladder from the repair bench to the fab
- [The Chemicals Behind AI Memory Chips (DRAM, NAND, HBM)](https://alliancechemical.com/blogs/articles/chemicals-behind-ai-memory-chips-dram-nand-hbm-cleaning-etch): The industrial wet chemicals that clean and etch every memory chip — the Piranha clean (concentrated sulfuric acid + hydrogen peroxide), the RCA SC1/SC2 sequence (ammonium hydroxide and hydrochloric acid with hydrogen peroxide), and the ~160°C hot phosphoric acid silicon-nitride strip that makes 3D NAND possible; plus low-particle nitric acid and ACS/technical/low-particle grade selection
- [Does Bleach Expire? Sodium Hypochlorite Shelf Life, Decay Chemistry & Storage](https://alliancechemical.com/blogs/articles/does-bleach-expire-sodium-hypochlorite-shelf-life): Yes - bleach decomposes continuously into salt and sodium chlorate (3 NaOCl -> 2 NaCl + NaClO3), roughly 3.5x faster per +10 C (Powell); a 12.5% fill can reach ~10% within its first week (Solenis); second-order kinetics mean stronger solutions decay faster; storage rules (cool 50-70 F, dark, sealed, dated) and the 36% under-dose worked example for dosed applications
- [Does Hydrogen Peroxide Expire? Shelf Life, Storage & Testing](https://alliancechemical.com/blogs/articles/does-hydrogen-peroxide-expire): Yes - hydrogen peroxide decomposes continuously into water and oxygen (2 H2O2 -> 2 H2O + O2, about -98 kJ/mol), even sealed; stabilized grades lose under 1-2% of strength per year stored cool (Solvay, USP Technologies, Evonik), about 1%/year at 72 F vs 1%/week at 151 F vs 2%/day at 218 F (Evonik), roughly 2.2x faster per +10 C; retail 3% carries an expiration date because Hydrogen Peroxide Topical Solution is an OTC drug (FDA M003, 21 CFR 211.137; USP 2.5-3.5 g/100 mL, light-resistant containers); light, transition metals (active at 0.1 ppm) and pH above ~4.5-5 accelerate decay; containers vent oxygen (49 CFR 173.24(g), IP5 for IBCs); the potato/catalase fizz test shows some peroxide is left but not how much, the USP permanganate titration (1 mL 0.1 N KMnO4 = 1.701 mg H2O2) measures it; DOT: under 8% not regulated, UN2984 8-<20%, UN2014 20-60%, UN2015 >60%
- [Does Isopropyl Alcohol Expire? What Actually Changes in the Bottle](https://alliancechemical.com/blogs/articles/does-isopropyl-alcohol-expire): Isopropyl alcohol does not spoil and is stable sealed; retail rubbing alcohol is dated because it is an OTC drug (21 CFR 211.137); once opened, 70% gets weaker because it sits below the 87.7 wt% (about 91 vol%) azeotrope and loses alcohol faster than water, 99% absorbs atmospheric water (0.2% max water spec), 91% drifts least; check 70% USP by specific gravity 0.872-0.883 at 20 C and 99% by Karl Fischer water; never distill or evaporate old IPA to dryness (peroxide concentration)
- [Sodium Hypochlorite for Cooling Towers & AI Data Centers](https://alliancechemical.com/blogs/articles/sodium-hypochlorite-cooling-tower-data-center): How much to dose per 1,000 gallons, the real cost per pound of active chlorine, and why AI data-center cooling towers run on sodium hypochlorite for biofilm and Legionella control (ASHRAE 188)
- [Acetone in Carbon Fiber & Composite Manufacturing](https://alliancechemical.com/blogs/articles/acetone-carbon-fiber-composite-manufacturing): How acetone preps, cleans, and recycles carbon-fiber & composite parts — mold and surface prep, resin cleanup, solvolysis fiber recovery, and choosing Technical vs ACS grade
- [Tert-Butyl Acetate (TBAc): The VOC-Exempt Solvent Guide](https://alliancechemical.com/blogs/articles/tert-butyl-acetate-tbac-voc-exempt-solvent-guide): The VOC-exempt solvent (EPA 40 CFR 51.100(s)) for low-VOC coatings, inks & adhesives — TBAc chemistry, TBAc vs n-butyl acetate vs ethyl acetate vs acetone, the two compliance catches (still tracked for permits; California/CARB does not exempt it), Class IB flammability, and buying technical grade
- [Potassium Hydroxide (KOH): Uses, Grades & Safety](https://alliancechemical.com/blogs/articles/potassium-hydroxide-koh-uses-grades-safety-guide): What caustic potash is and why it is one of the two chemicals called lye, KOH vs NaOH including the 1.403x mass conversion, uses in liquid and Castile soap, alkaline battery electrolyte, biodiesel catalysis and alkaline electrolysis, the aluminium/zinc hydrogen-gas hazard, and choosing Technical Grade vs ACS Reagent Grade. Corrects the widely mis-cited OSHA PEL: none is in force, the 2 mg/m3 ceiling is a NIOSH REL
- [How to Buy Potassium Hydroxide in the United States](https://alliancechemical.com/blogs/articles/how-to-buy-potassium-hydroxide-supplier-guide): Sourcing guide covering the three supply channels, grade selection by application, pack sizes from 2 lb to 2,200 lb, the documentation a supplier must provide, DOT classification as UN1813 solid and UN1814 solution (Class 8, PG II), and the seven questions to ask before ordering
- [Sodium Hydroxide in Direct Air Capture](https://alliancechemical.com/blogs/articles/sodium-hydroxide-direct-air-capture): How caustic soda captures CO2 from the air in direct air capture — the CO2 + 2 NaOH chemistry, the causticization-and-calcination regeneration loop, NaOH vs KOH, the DAC-to-soda-ash route, and choosing Technical, ACS, or Membrane grade
- [Magnesium Chloride for Energy Storage & Green Cement](https://alliancechemical.com/blogs/articles/magnesium-chloride-energy-storage-batteries-sorel-cement): How magnesium chloride is used in research-stage magnesium-ion battery electrolytes (MACC and APC chloride complexes, divalent Mg-2+ and dendrite resistance) and in Sorel magnesium-oxychloride cement — the chemistry, the honest pre-commercial maturity, and choosing the right grade (USP hexahydrate for lab and pilot work vs anhydrous/technical for production)
- [Ethyl Acetate as a Green Solvent (NMP Replacement)](https://alliancechemical.com/blogs/articles/ethyl-acetate-green-solvent-nmp-replacement-guide): Why manufacturers replace reprotoxic NMP, DMF, and dichloromethane with ethyl acetate — a bio-based, ICH Q3C Class 3 green solvent — across coatings, pharmaceutical extraction, and battery & electronics manufacturing; where it fits, where it doesn't, and Technical vs ACS grade selection
- [Choosing Solvents for Cannabis Extraction](https://alliancechemical.com/blogs/articles/choosing-the-right-solvent-for-cannabis-extraction-a-comprehensive-guide): Ethanol, hexane, and hydrocarbon comparison
- [Phosphoric Acid Applications](https://alliancechemical.com/blogs/articles/the-power-of-phosphoric-acid-industrial-and-food-grade-applications): Industrial and food-grade uses
- [Sodium Hydroxide in Industry](https://alliancechemical.com/blogs/articles/industrial-revolution-the-impact-of-sodium-hydroxide-lye-on-modern-industry): Manufacturing and processing applications
- [Vinegar in Agriculture](https://alliancechemical.com/blogs/articles/understanding-the-wide-ranging-applications-of-vinegar-in-agriculture-from-10-to-50-concentration): 10% to 50% concentration uses
- [D-Limonene as Degreaser](https://alliancechemical.com/blogs/articles/what-makes-d-limonene-one-of-the-best-degreasers-better-than-orange-oil): Natural solvent comparison
- [Pressure Washing Chemicals](https://alliancechemical.com/blogs/articles/pressure-washing-chemicals): Chemical selection guide
- [Glycol Ether Applications](https://alliancechemical.com/blogs/articles/the-many-uses-of-glycol-ethers-in-industrial-and-household-applications): Industrial and household uses
- [Sulfuric Acid Supply Crisis 2026](https://alliancechemical.com/blogs/articles/sulfuric-acid-supply-crisis-2026-sulfur-shortage): The 2026 sulfur shortage, Strait of Hormuz, and China/Russia/Turkey export bans explained for buyers
- [Chlorine Does Not Kill Cyclospora: What Produce Wash Water Actually Does](https://alliancechemical.com/blogs/news/chlorine-does-not-kill-cyclospora-produce-wash-water-chemistry): Why FDA states that chlorine and other common anti-microbial chemical treatments are not effective against Cyclospora cayetanensis, so a produce wash has no chemical kill step for this parasite (cooking is the only confirmed one); what free chlorine in a wash flume actually controls (cross-contamination in the recirculating water, not the leaf — a 1–2 log reduction for bacteria and viruses per FDA guidance); and the hypochlorous-acid/hypochlorite-ion pH equilibrium that decides potency (pKa ≈ 7.5; ~91.6% active HOCl at pH 6.5 vs ~9.9% at pH 8.5 at an identical free-chlorine ppm reading), including why sodium hypochlorite's own alkalinity (12.5% ≈ pH 13) pushes a wash tank out of that band and why citric acid is dosed to hold it
- [Your PCE Deadline Just Moved to 2027: EPA Extends PCE and Carbon Tetrachloride TSCA Compliance Dates](https://alliancechemical.com/blogs/news/epa-extends-pce-ctc-tsca-compliance-dates-2027): EPA's final rule of July 28, 2026 (Federal Register Vol. 91 No. 143, pp. 47145-47153; FR Doc. 2026-15192; docket EPA-HQ-OPPT-2026-0992; RIN 2070-AL37; amending 40 CFR Part 751), effective on publication, extending Workplace Chemical Protection Program (WCPP) compliance dates for perchloroethylene (PCE, tetrachloroethylene, CAS 127-18-4) and carbon tetrachloride (CTC) for non-federal owners and operators. PCE initial exposure monitoring moved from December 15, 2025 to June 21, 2027; meeting the existing chemical exposure limit (ECEL), establishing a regulated area, providing respiratory PPE and instituting a respiratory PPE program moved from March 13, 2026 to September 20, 2027; the workplace information and training program moved to September 20, 2027 for federal and non-federal entities alike; and the exposure control plan moved from June 7, 2027 to December 20, 2027. CTC moved to the same June 21 and September 20, 2027 dates under 40 CFR 751.707, severable from the PCE amendments at 40 CFR 751.607. The PCE ECEL itself is UNCHANGED at 0.14 ppm as an 8-hour time-weighted average with a 0.10 ppm action level, against an OSHA permissible exposure limit of 100 ppm 8-hour TWA (29 CFR 1910.1000 Table Z-2) — roughly a 714-fold difference — and EPA states the extension "would primarily result in a delay of when those costs and benefits begin accruing" rather than reducing total cost. Trichloroethylene (TCE) is NOT covered by this action: certain provisions of the December 2024 TCE rule remain postponed until the conclusion of judicial review (FR Doc. 2026-08750, May 5, 2026), so PCE has fixed dates and TCE has none. Also covers two provisions commonly missed — exposure monitoring conducted within five years prior to February 18, 2025 may satisfy the initial monitoring requirement, and where PCE use commences after June 21, 2027 initial monitoring is due within 30 days of introduction with the ECEL applying four months after
- [Why the USS Abraham Lincoln Rusted Above the Waterline and Not Below It](https://alliancechemical.com/blogs/news/uss-abraham-lincoln-rust-splash-zone-corrosion-phosphoric-acid): After 286 days at sea the aircraft carrier USS Abraham Lincoln came into Laem Chabang, Thailand on 2 September 2026 streaked with running rust, all of it in the marine splash zone above the waterline, with the immersed hull nearly clean. Explains rust as an electrochemical cell (Fe → Fe²⁺ + 2e⁻ at the anode; O₂ + 2H₂O + 4e⁻ → 4OH⁻ at the cathode) with seawater as the electrolyte (NOAA: about 35 parts per thousand salt, chloride and sodium the most prevalent ions); why the splash zone corrodes fastest (thin oxygen-saturated films from wet–dry cycling and chloride concentrated by evaporation, versus oxygen diffusion-limited corrosion below the waterline, per the Humble/LaQue/Larrabee field profiles); the Navy's corrosion bill ($3.3 billion a year for ships, 21.6% of ship maintenance, FY2008–2010, DoD Corrosion Policy and Oversight Office; $23.3 billion DoD-wide); the USS Stout 215-day precedent (2020); NAVSEA's "shipboard preservation never stops" and the move to polysiloxane topside coatings; and the rust-removal chemistry — Loctite Naval Jelly is 10–30% phosphoric acid and 0.1–1% sulfuric acid per its SDS; phosphoric acid dissolves iron(III) oxide (Fe₂O₃ + 2H₃PO₄ → 2FePO₄ + 3H₂O) and leaves a non-conductive iron-phosphate conversion layer that primer bonds to; oxalic acid for rust stains; why hydrochloric (muriatic) acid is the wrong choice for steel because it leaves chloride behind and causes flash rust. Includes a six-step shop procedure (degrease, remove loose scale, apply 30% and keep it wet 10–30 min, rinse, dry, prime within hours).
- [Glycerin Isn’t Sealing Your Teeth: The 27-Rinse Myth, the 2007 Diethylene Glycol Scare and the Test That Actually Matters](https://alliancechemical.com/blogs/news/glycerin-toothpaste-myth-27-rinses-diethylene-glycol-identity-test): The viral September 2026 claim that glycerin in toothpaste coats teeth so thickly it takes 27 rinses to remove traces to a self-published late-1990s book with no study attached. Glycerin (glycerol, propane-1,2,3-triol, C₃H₈O₃, CAS 56-81-5) is listed by PubChem as miscible with water and hygroscopic, with a viscosity of 954 cP at 25 °C that falls to about 17 cP in a 70% solution — which is why it is the humectant in toothpaste and why a rinse-proof film is the wrong picture. The real glycerin scare: on 1 June 2007 FDA advised consumers to discard toothpaste labelled made in China after detaining a shipment containing about 3% diethylene glycol (DEG) by weight and finding retail tubes at 3–4%, with 14 brands placed on an import alert and no U.S. poisonings reported. FDA’s Guidance for Industry on testing glycerin for DEG and ethylene glycol (first issued 2007, revised May 2023) ties the 1937 elixir sulfanilamide deaths (107), Haiti 1995–96 (at least 80), Panama 2006 and the 2022–23 paediatric syrup deaths (more than 300 across at least seven countries, per WHO) to three shared gaps: no identity test on the incoming glycerin, reliance on the supplier’s certificate of analysis, and CoAs on distributor letterhead with no chain of custody. The USP glycerin monograph (revised May 2008) builds a not-more-than 0.10% DEG and ethylene glycol limit into Identification Test B (gas chromatography); 21 CFR 211.84 requires identity testing on representative samples of each shipment of each lot, and FDA recommends sampling every container. Alliance Chemical stocks glycerin in USP Grade, Technical Grade and 25/50/75% Food-Grade solutions, quart to drum; Certificate of Analysis on request at no charge.
- [Who Wins the 2026 Chemistry Nobel? Three Picks, and the One Made on a Bench](https://alliancechemical.com/blogs/news/nobel-prize-chemistry-2026-predictions-self-assembled-monolayers): The 2026 Nobel Prize in Chemistry is announced Wednesday 7 October 2026 at 11:45 CEST at the earliest (4:45 a.m. US Central), per the Nobel Foundation. Clarivate's 2026 Citation Laureates (17 September 2026) name three chemistry picks: David Allara (Penn State), Ralph Nuzzo (University of Illinois Urbana-Champaign) and Jacob Sagiv (Weizmann Institute) for development of self-assembled monolayers (SAMs); Harry Gray and Jay Winkler (Caltech) for long-range electron transfer in proteins; and David Liu (Harvard and the Broad Institute) for base and prime editing. Clarivate says 89 of its Citation Laureates since 2002 later won a Nobel, often years after first being named, so the list is a citation signal, not a forecast; Alliance Chemical makes no pick. Explains self-assembled monolayers: films one molecule thick that form on their own, from Sagiv's 1980 silane monolayers on glass (J. Am. Chem. Soc. 102, 92) and Nuzzo and Allara's 1983 sulfur-on-gold work (J. Am. Chem. Soc. 105, 4481); the standard thiol-on-gold preparation of about 1-10 mM thiol in ethanol for 12-18 hours (Love et al., Chem. Rev. 2005); silane films from dry hydrocarbon solvents such as toluene; and piranha (concentrated sulfuric acid with 30% hydrogen peroxide) substrate cleaning, described but not given as a recipe. Lists the certificate-of-analysis lines that matter for surface work (residue after evaporation, water, heavy metals) for Sulfuric Acid 96% ACS Grade, Hydrogen Peroxide 30% ACS Grade, Toluene (reagent grade) and Isopropyl Alcohol 99.9% ACS Reagent Grade; notes Alliance lists only denatured 200 proof ethanol (3C), not undenatured absolute ethanol. Certificate of Analysis on request at no charge.
- [EPA's Draft PFAS Biosolids Guidance: What It Says, the 1 ppb Reversal, and the October 5 Comment Deadline](https://alliancechemical.com/blogs/news/epa-pfas-biosolids-draft-guidance-october-5-comment-deadline-2026): EPA's draft guidance for reducing risk from PFOA and PFOS in biosolids (memo signed June 29, 2026 by Assistant Administrator Jessica L. Kramer, released July 1, 2026, docket EPA-HQ-OW-2026-2509), voluntary if finalized, comments close October 5, 2026. Recommends source control and industrial pretreatment, avoiding land application near drinking-water sources and where children under 5 have access, favoring grain, fiber and ethanol-corn crops, and performance testing of sewage sludge incinerators. Says the 1 ppb starting concentration in the January 14, 2025 draft sewage sludge risk assessment was not a safe level and lists three flaws in that assessment (no national occurrence survey, only higher-risk hypothetical scenarios, the 1 ppb figure). Where US sewage sludge goes per the 2024 Biosolids Annual Reports: about 60% land applied, roughly 2.3 million dry metric tons a year (31.5% agricultural land, 20% sold to the public bagged or bulk, 7% other land such as forestry, 1% reclamation). State programs: Michigan PFOS tiers (land application prohibited above 100 ppb; seven plants cut sludge PFOS up to 99% through industrial pretreatment), Virginia SB 386 (50 ppb), Wisconsin, Minnesota, Colorado and Maryland tiered frameworks, Washington, Oregon and Florida monitoring laws, Maine's 2022 land-application ban and Connecticut's 2024 ban. Why conventional wastewater treatment neither removes nor destroys PFOA and PFOS: fluorinated surfactant tails sorb to solids (PFOS more than PFOA), and anaerobic digestion, Class B lime stabilization (pH 12) and Class A alkaline treatment do not break the carbon-fluorine bond; EPA says incinerator effectiveness is uncertain. Written from New Orleans during WEFTEC 2026.
- [How Is Citric Acid Made? The 1917 Mold Discovery That Replaced Lemons](https://alliancechemical.com/blogs/articles/how-is-citric-acid-made-aspergillus-niger-mold-fermentation): About 99% of world citric acid (C6H8O7, CAS 77-92-9) is made by microbial fermentation, mostly with the mold Aspergillus niger, not extracted from lemons (Max et al. 2010; USDA AMS 2015). Covers Scheele's 1784 isolation from lemon juice; the pre-1920s Sicilian citrate-of-lime trade run through Italy's Camera Agrumaria (citrate 16.5¢/lb in 1914 to 61.5¢/lb by December 1919, U.S. Tariff Commission 1921); Wehmer's failed 1893 Citromyces process; James N. Currie's 1917 J. Biol. Chem. paper (31:15–37) showing A. niger makes citric acid from high-sugar, low-nitrogen medium acidified to pH 3.4–3.5 so bacteria cannot grow; Pfizer's SUCIAC pilot plant (1919), Jasper Kane's switch to molasses (1933) and the price fall from $1.25/lb (1919) to 20¢ (1939); why Pfizer's deep-tank method came from gluconic acid (1929), not citric acid, before penicillin (ACS National Historic Chemical Landmark, 2008); modern purification (mycelium removed, calcium citrate precipitation, sulfuric acid release with gypsum by-product, carbon/ion exchange, crystallization: monohydrate below 36.5 °C, anhydrous above); FDA GRAS status under 21 CFR 184.1033; an evidence-level reading of the 2018 Sweis & Cressey case reports on manufactured citric acid; pKa 3.13/4.76/6.40 (NIST); monohydrate-to-anhydrous substitution factor 1.094; and grade selection across USP Food Grade, Food Grade, ACS Reagent Grade and 25%/50% Technical Grade solutions.
- [Two Solids Make a Liquid. Why Deep Eutectic Solvents Are Still Waiting](https://alliancechemical.com/blogs/news/deep-eutectic-solvents-choline-chloride-urea-glycerin-water-2026): A deep eutectic solvent (DES) is a liquid made by mixing a hydrogen-bond acceptor, usually choline chloride, with a hydrogen-bond donor such as urea, glycerol or ethylene glycol. Choline chloride melts at 302 C and urea at 133 C, yet their 1:2 mixture (reline) freezes at 12 C (Abbott et al., Chem. Commun. 2003); ethaline is choline chloride with ethylene glycol 1:2 and glyceline is choline chloride with glycerol 1:2. C&EN and CAS (5 October 2026) report more than 20,000 DES publications, 83 percent of them journal articles, and few industrial applications; the most-published pairs are choline chloride with urea (2,785), ethylene glycol (2,720) and glycerol (2,512). Water decides reproducibility: a choline chloride-urea DES keeps its structure to about 42 wt% water and becomes an aqueous solution at about 51 wt% (Hammond, Bowron and Edler, Angew. Chem. 2017); glyceline made from a 25% glycerol solution is 63 wt% water. Explains how DESs differ from ionic liquids and which donor grade to specify (neat, uninhibited, anhydrous or the stated hydrate; check assay and water on the CoA). Alliance Chemical lists the donors (glycerin USP and technical, urea, ethylene and propylene glycol, citric and oxalic acid), not choline chloride or betaine. Certificate of Analysis on request at no charge.
- [Half a Part per Billion: The Number at the Center of the FDA Food-Additive Fight](https://alliancechemical.com/blogs/news/fda-threshold-of-regulation-half-part-per-billion-food-additives-2026): The FDA proposed rule on substances generally recognized as safe (GRAS), published 11 August 2026 (91 FR 51834, docket FDA-2025-N-3262, comments close 9 December 2026), would make GRAS notices mandatory and would also extend the threshold of regulation (TOR) exemption, 21 CFR 170.39, from substances that migrate out of food packaging and processing equipment to any substance used in food, both directly or indirectly added to food. Since 1995 the TOR has applied to substances not shown to be carcinogens at a dietary concentration at or below 0.5 parts per billion, which the rule equates to 1.5 micrograms per person per day on a 3,000 g daily diet; the proposal restates it as 0.025 micrograms per kilogram of body weight per day (0.5 µg at 20 kg, 1.5 µg at 60 kg, 2.0 µg at 80 kg) and caps any carcinogenic impurity at a one-in-a-million lifetime cancer risk. A TOR request needs minimal data and no full safety narrative, and the FDA may decline an exemption where a use may pose a public health risk. Half a part per billion is about 1.25 g in an Olympic pool, one second in about 63 years, or roughly a fortieth of a 59-microgram grain of table salt per day. Critics quoted by The Guardian (10 October 2026; Maricel Maffini, Maria Doa of EDF) say some non-carcinogenic substances act below that level, that small doses add up, and cite the 2005 TOR exemption for perchlorate antistatic agents in bulk dry-food bags; FDA assessments put average perchlorate intakes below the EPA reference dose of 0.7 µg/kg/day. Proposed 21 CFR 170.205(b)(2) requires no GRAS notice for substances listed or affirmed in parts 182, 184 or 186, including citric acid (184.1033), acetic acid (184.1005), phosphoric acid (182.1073), glycerin (182.1320), propylene glycol (184.1666) and magnesium chloride (184.1426); 21 CFR 182.1(b)(3) still requires an appropriate food grade, prepared and handled as a food ingredient. Alliance Chemical takes no side on the rule. Certificate of Analysis on request at no charge.
- [Florida Will Pick 10 Million Boxes of Oranges. Why D-Limonene Watches Brazil](https://alliancechemical.com/blogs/news/florida-orange-forecast-2026-d-limonene-supply): USDA forecast Florida's 2026-27 orange crop at 10.0 million boxes on 9 October 2026, down 23 percent and about 96 percent below the 244 million of 1997-98. D-limonene is recovered from orange peel at juice plants (about 0.3 kg of peel oil and d-limonene per 40.8 kg box, University of Florida), so Brazil, forecast at 263.15 million boxes and processing about 80 percent for juice, sets most of the supply.
- [The Real Giant Squid Floats on Ammonia. Netflix's Below Left Out the Chemistry](https://alliancechemical.com/blogs/news/giant-squid-ammonia-buoyancy-netflix-below): Real giant squid float on ammonium chloride, not air. A 1979 study (Clarke, Denton and Gilpin-Brown) of a giant squid caught alive off Newfoundland measured 338 millimolar ammonium and 88 millimolar sodium, against 481 in sea water, in its mantle fluid at pH 5.8, where about 2,800 ammonium ions sit beside each free ammonia molecule. Ammonium hydroxide runs the same equilibrium on the alkaline side of the ammonium pKa of 9.25.
- [The Court Threw Out the Methylene Chloride Rule. The PCE Rule Was Built the Same Way](https://alliancechemical.com/blogs/news/fifth-circuit-methylene-chloride-ruling-pce-rule): On September 15, 2026 the US Court of Appeals for the Fifth Circuit vacated EPA's 2024 methylene chloride rule in East Fork Enterprises v. EPA, No. 24-60227, holding that TSCA requires a separate unreasonable-risk determination for each condition of use rather than one whole-chemical finding, and that EPA could not drop its assumption that workers wear PPE without evidence. EPA's December 2022 PCE risk determination (87 FR 76481) made both of those moves, and the challenge to the December 2024 PCE rule, FabriClean Supply v. EPA, No. 25-60006, was stayed in the same court from March 12, 2025 (last reported extension June 22, 2026). The PCE rule has not been vacated: the ECEL is 0.14 ppm 8-hour TWA against an OSHA PEL of 100 ppm (about 714-fold), EPA named 0.47 and 0.50 ppm as alternatives in its July 2025 reconsideration notice (90 FR 35858), and the 2027 compliance dates of 91 FR 47145 stand. Rehearing petitions are due October 30, 2026 (FRAP 40); the mandate would issue about November 6, 2026 if none is filed.
- [Citric Acid From India Faces 162% in Preliminary Duties. From Canada, the Dumping Margin Is Zero](https://alliancechemical.com/blogs/news/citric-acid-duties-india-canada-colombia-six-countries-2026): Citric acid imported into the United States sits under trade cases against six origins. On 26 August 2026 the U.S. Department of Commerce preliminarily found citric acid from India sold at less than fair value, with an All Others antidumping cash deposit of 98.22% (100.21% less a 1.99% export-subsidy offset; 149.74% for Daffodil Pharmachem) on top of a 63.88% preliminary countervailing duty set on 26 June 2026, a combined 162.10% of entered value. The same day it found a 0.00% dumping margin for Jungbunzlauer Canada; Canadian citric acid keeps a 16.50% preliminary countervailing duty (a 2009 antidumping order on Canada was revoked in 2020). Final determinations are due by 8 January 2027 (postponed to 135 days); the ITC final-phase hearing is 12 January 2027; preliminary countervailing instructions may not remain in effect for more than 4 months (19 U.S.C. 1671b(d)). Older orders remain on China (2009, continued 29 May 2026; RZBC review 7.23%, China-wide 156.87%) and on Belgium, Colombia and Thailand (2018); 2026 review preliminaries: Citribel 0.00%, COFCO and Sunshine 0%, Sucroal 3.25% (19 October 2026). The scope covers citric acid, sodium citrate and potassium citrate dry or in solution, blends of 40% or more, and crude calcium citrate, including material diluted or blended in a third country. Anhydrous citric acid is 192.12 g/mol and the monohydrate 210.14 g/mol (91.4% acid). Alliance Chemical makes no claim about the origin of its own citric acid. Certificate of Analysis on request at no charge.
- Full article index: https://alliancechemical.com/blogs/articles
- [Rust Removers Ranked: Which Acid Actually Works Best?](https://alliancechemical.com/blogs/articles/rust-removers-ranked-which-acid-works-best): This article compares five common rust removers—vinegar (5% acetic acid, pKa 4.76), citric acid (10–25% solution), oxalic acid (5–10% solution, pKa 1.25, CAS 144-62-7), phosphoric acid (30% solution), and muriatic (hydrochloric) acid—detailing their chemical mechanisms (dissolution, chelation, conversion), speed, selectivity, toxicity, and suitability for specific tasks (e.g., food-contact, heavy rust, paint-prep).
- [The Vinegar Dilution Guide: What 10%, 30%, 50% & 75% Acetic Acid Each Do — and How to Mix Any Strength](https://alliancechemical.com/blogs/articles/concentrated-vinegar-strength-guide-10-30-50-75-percent-acetic-acid-uses-dilution-safety): This article details acetic acid concentrations in vinegar, specifying 5% (table/white, food use), 10% (cleaning), 20% (heavy cleaning), 30% (industrial/horticultural), 50% and 75% (concentrates), and 99.7% (glacial, CAS 64-19-7). It explains dilution math (e.g., 1 gallon 30% makes 6 gallons 5%), US food law minimum (4% acetic acid), and handling/PPE requirements by strength. Production methods and grade distinctions are described.
- [DIY Fog Fluid: How to Make Fog Machine Liquid (PG, Glycerin & DI Water)](https://alliancechemical.com/blogs/articles/brewing-a-spooky-atmosphere-the-role-of-propylene-glycol-and-glycerin-in-fog-generation): This article details DIY fog machine fluid formulation using USP-grade propylene glycol (CAS 57-55-6) or USP-grade glycerin (CAS 56-81-5) mixed with deionized water at a standard 1:4 active-to-water ratio. It compares PG (boiling point 370 °F/188 °C, 0.5–2 μm particles, 30–90 sec hang time) versus glycerin (boiling point 554 °F/290 °C, 2–10 μm particles, 2–5 min hang time), outlines machine compatibility (PG: all machines; glycerin: 1000W+), and prohibits ethylene glycol, mineral oil, or tap water.
- [Is Rubbing Alcohol the Same as Isopropyl Alcohol? A Chemical Supplier Explains](https://alliancechemical.com/blogs/articles/rubbing-alcohol-vs-isopropyl-alcohol): The article distinguishes isopropyl alcohol (CAS 67-63-0, C3H8O, MW 60.10, boiling point 82°C, flash point 12°C) from “rubbing alcohol,” detailing U.S. Pharmacopeia monographs: Isopropyl Rubbing Alcohol (68.0–72.0% isopropyl alcohol by volume, ≤0.01% non-volatile residue) and Rubbing Alcohol (68.5–71.5% denatured ethanol with acetone and methyl isobutyl ketone, plus bitterants). It also compares British “surgical spirit” (≈95% ethanol, 2.5% castor oil, 2% diethyl phthalate, 0.5% methyl salicylate).
- [The Complete Guide to Soda Ash (Sodium Carbonate): From Tie-Dye to Pool Chemistry](https://alliancechemical.com/blogs/articles/soda-ash-sodium-carbonate-complete-guide): Soda ash (sodium carbonate, Na₂CO₃, CAS 497-19-8) is a white, odorless, hygroscopic powder with a melting point of 851°C, pH ~11.5 (1% solution), and water solubility of 21.5 g/100 mL at 20°C. U.S. production is mainly from trona ore; ~47% is used in glass manufacturing. Standard tie-dye pre-soak: 1 cup (227 g) per gallon, pH ~10.5. Pool dose: 6 oz (170 g) per 10,000 gallons raises pH by ~0.2. Technical grade is 95–99% pure.
- [What is MEK (Methyl Ethyl Ketone)?](https://alliancechemical.com/blogs/articles/what-is-mek-methyl-ethyl-ketone): Methyl ethyl ketone (MEK, CAS 78-93-3, IUPAC: 2-butanone, C4H8O) is a clear, colorless, volatile solvent with a molecular weight of 72.11, boiling point 79.6°C, melting point -86°C, and flash point -4°C. The article details MEK’s industrial uses (surface coatings, adhesives, extraction, cleaning), compares MEK to n-butyl acetate (CAS 123-86-4; boiling point 126°C; flash point 22°C), and describes its miscibility and safety requirements.
- [The Solvent That Let Bing Crosby Quit Live Radio: MEK, Magnetic Tape, and Why the Solvent Has to Leave](https://alliancechemical.com/blogs/articles/mek-magnetic-tape-bing-crosby-ampex-1948): In 1948 Bing Crosby's pre-recorded ABC show moved from transcription disc to the first Ampex Model 200 tape recorders (delivered April 1948, funded by a $50,000 check sent with no cover letter). Magnetic tape is iron oxide and a vinyl binder dispersed in solvent — Ampex's patent US 3,404,997 gives 70 parts oxide, 12.1 parts methyl ethyl ketone and 48.3 parts toluene by weight (4:1 toluene:MEK) — coated on film, oriented in a magnetic field and dried; MEK (boiling point 79.6°C, flash point about -3°C, CAS 78-93-3) flashes off first and locks the oriented particles. EPA removed MEK from the Clean Air Act HAP list on 19 December 2005 (70 FR 75047); it remains a VOC under 40 CFR 51.100(s). Alliance Chemical stocks MEK in Technical Grade and ACS Reagent Grade.
- [70% vs 91% vs 99% Isopropyl Alcohol Compared](https://alliancechemical.com/blogs/articles/70-vs-91-vs-99-isopropyl-alcohol-which-concentration-is-best): Isopropyl alcohol (CAS 67-63-0, C3H8O) compared at 70%, 91% and 99%. Covers what the water fraction does to evaporation rate and surface residue, why higher concentrations are specified for electronics work, and the IPA-water azeotrope (87.7% by weight, boiling 80.37 C) that caps ordinary distillation near 91% by volume. Grades stocked: Technical, USP, ACS Reagent. Application suitability is the buyer's to determine from the SDS and their own specification.
- [Mineral Spirits vs. Paint Thinner: Key Differences and When to Use Each](https://alliancechemical.com/blogs/articles/mineral-spirits-vs-paint-thinner-key-differences-and-when-to-use-each): The article compares mineral spirits (CAS 64742-47-8; 60–100% C9–C15 cycloalkanes, 15–40% C9–C15 alkanes; boiling point 158°C; flash point 42°C; molecular weight 134–170) and generic paint thinners like Blendpro (CAS 64742-95-6; higher aromatic content; boiling point 155°C; flash point 40°C; molecular weight 106.2), detailing differences in chemical composition, physical properties, water solubility (1.5 g/L for mineral spirits), and appropriate industrial applications.
- [Sodium Thiosulfate: The Complete Chemistry, Formula, and Dechlorination Guide](https://alliancechemical.com/blogs/articles/sodium-thiosulfate-complete-guide-formula-dechlorination-uses): Sodium thiosulfate (Na₂S₂O₃), most commonly supplied as pentahydrate (Na₂S₂O₃·5H₂O, CAS 10102-17-7, molar mass 248.18 g/mol), is a colorless, odorless, highly water-soluble salt with pH 6.5–8.4 (10% solution), density 1.67 g/cm³, and melting point 48°C. Solubility increases from 70.1 g/100 mL at 20°C to ≈231 g/100 mL at 60°C. Main uses: chlorine neutralization (2.85× Cl neutralize ratio), photographic fixing, iodometric titration, gold leaching, and cyanide antidote.
- [How to Remove Candle Wax from Any Surface: 5 Easy Methods](https://alliancechemical.com/blogs/articles/say-goodbye-to-candle-wax): The article details methods for removing paraffin candle wax (a nonpolar straight-chain hydrocarbon) from various surfaces, specifying that wax dissolves in nonpolar solvents such as acetone (CAS 67-64-1, boiling point 56°C, flash point -18°C), mineral spirits (boiling point 158°C, flash point 42°C), and d-limonene (94-100% purity, boiling point 175°C). It explains freezing for hard surfaces, warm iron/paper towel for fabrics, and solvent-specific safety and compatibility considerations.
- [The Army Made a Man Fly on Hydrogen Peroxide, Then Walked Away: The Bell Rocket Belt, the X-15 and the Machine That Trained Neil Armstrong](https://alliancechemical.com/blogs/articles/bell-rocket-belt-hydrogen-peroxide-1961-x-15-lunar-landing-trainer): The Bell Rocket Belt, built by Bell Aerosystems for the U.S. Army, was a hydrogen peroxide (H2O2, CAS 7722-84-1) monopropellant pack: 90% peroxide decomposed over a silver catalyst into steam and oxygen, no combustion, about 21 seconds of flight. Harold Graham made the first free flight on April 20, 1961 (13 s, 113 ft); the Army filmed demonstrations at Fort Eustis and the Pentagon on June 7–15, 1961 (National Archives 111-LC-45135) and did not adopt it. The same peroxide-rocket principle supplied the X-15 reaction controls (altitude record 354,200 ft, Aug 22, 1963) and the two 100–500 lb lift rockets and sixteen attitude rockets of NASA’s Lunar Landing Research Vehicle, which Neil Armstrong trained on and ejected from on May 6, 1968 when helium loss depleted its peroxide. Transport classes: 8–<20% UN 2984 PG III, 20–60% UN 2014 PG II, >60% UN 2015 PG I. Alliance Chemical stocks 3%–30% in Technical Grade and ACS Reagent Grade; not a propellant, not sold for propulsion.

## Products: Acids (84)

- [10% Diluted Acetic Acid Food Grade](https://alliancechemical.com/products/10-acetic-acid-food-grade): CAS 64-19-7; sizes 1 Quart–330 Gallon; UN2790
- [10% Vinegar - Concentrated Industrial Strength](https://alliancechemical.com/products/10-vinegar-concentrated-industrial-strength): CAS 64-19-7; Technical Grade; sizes 1 Quart–330 Gallon; UN2790
- [20% Diluted Acetic Acid Food Grade](https://alliancechemical.com/products/20-acetic-acid-food-grade): CAS 64-19-7; sizes 1 Quart–330 Gallon; UN2790
- [30% Diluted Acetic Acid Food Grade](https://alliancechemical.com/products/30-acetic-acid-food-grade): CAS 64-19-7; sizes 1 Quart–330 Gallon; UN2790
- [30% Vinegar - Concentrated Industrial Strength](https://alliancechemical.com/products/30-vinegar-concentrated-industrial-strength): CAS 64-19-7; Technical Grade; sizes 1 Quart–330 Gallon; UN2790
- [5% Diluted Acetic Acid Food Grade](https://alliancechemical.com/products/5-acetic-acid-food-grade): CAS 64-19-7; sizes 1 Quart–330 Gallon
- [50% Diluted Acetic Acid Food Grade](https://alliancechemical.com/products/50-acetic-acid-food-grade): CAS 64-19-7; sizes 1 Quart–330 Gallon; UN2790
- [50% Vinegar - Concentrated Industrial Strength](https://alliancechemical.com/products/50-vinegar-concentrated-industrial-strength): CAS 64-19-7; Technical Grade; sizes 1 Quart–330 Gallon; UN2790
- [75% Diluted Acetic Acid Food Grade](https://alliancechemical.com/products/75-acetic-acid-food-grade): CAS 64-19-7; sizes 1 Quart–330 Gallon; UN2790
- [75% Vinegar](https://alliancechemical.com/products/75-vinegar): CAS 64-19-7; Technical Grade; sizes 1 Quart–330 Gallon; UN2790
- [75% Vinegar ACS Grade](https://alliancechemical.com/products/vinegar-75-acs-grade): CAS 64-19-7; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN2790
- [Acetic Acid Glacial - Food Grade](https://alliancechemical.com/products/acetic-acid-glacial-food-grade): CAS 64-19-7; 100%; sizes 1 Quart–330 Gallon; UN2789
- [Acetic Acid Glacial ACS Grade](https://alliancechemical.com/products/acetic-acid-glacial-99-acs-grade): CAS 64-19-7; ACS Reagent Grade; 100%; sizes 1 Quart–330 Gallon; UN2789
- [Acetic Acid Glacial Technical](https://alliancechemical.com/products/acetic-acid-glacial-technical): CAS 64-19-7; Technical Grade; 100%; sizes 1 Quart–330 Gallon; UN2789
- [Boric Acid Powder 99% ACS Grade](https://alliancechemical.com/products/boric-acid-powder-99-acs-grade): CAS 10043-35-3; ACS Reagent Grade; sizes 2 lb–50 lb
- [Boric Acid Technical Grade](https://alliancechemical.com/products/boric-acid): CAS 10043-35-3; 100%; sizes 2 lb–50 lb
- [Citric Acid 25% Solution](https://alliancechemical.com/products/citric-acid-25-solution): CAS 77-92-9; Technical Grade; sizes 1 Quart–330 Gallon
- [Citric Acid 50% Solution Technical Grade](https://alliancechemical.com/products/citric-acid-50-solution): CAS 77-92-9; sizes 1 Quart–330 Gallon
- [Citric Acid Anhydrous - ACS Reagent Grade](https://alliancechemical.com/products/citric-acid-anhydrous-acs-reagent-grade): CAS 77-92-9; sizes 2 lb–55 lb
- [Citric Acid Anhydrous - Food Grade](https://alliancechemical.com/products/citric-acid-anhydrous-food-grade): CAS 77-92-9; sizes 2 lb–55 lb
- [Citric Acid Monohydrate - ACS Reagent Grade](https://alliancechemical.com/products/citric-acid-monohydrate-acs-reagent-grade): CAS 5949-29-1; sizes 2 lb–55 lb
- [Citric Acid Monohydrate - USP Food Grade](https://alliancechemical.com/products/citric-acid-monohydrate-usp-food-grade): CAS 5949-29-1; 99.5%; sizes 2 lb–55 lb
- [Drain Hammer - Sulfuric Acid Drain Cleaner](https://alliancechemical.com/products/drain-hammer-sulfuric-acid-drain-cleaner): CAS 7664-93-9; Technical Grade; 93%; sizes 1 Quart–330 Gallon; UN1830
- [Hydrochloric Acid 10% ACS Grade](https://alliancechemical.com/products/hydrochloric-acid-10-acs-grade): CAS 7647-01-0; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1789
- [Hydrochloric Acid 10% Technical Grade](https://alliancechemical.com/products/hydrochloric-acid-10-technical-grade): CAS 7647-01-0; sizes 1 Quart–330 Gallon; UN1789
- [Hydrochloric Acid 15% ACS Grade](https://alliancechemical.com/products/hydrochloric-acid-15-acs-grade): CAS 7647-01-0; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1789
- [Hydrochloric Acid 15% Technical Grade](https://alliancechemical.com/products/hydrochloric-acid-15-technical-grade): CAS 7647-01-0; sizes 1 Quart–330 Gallon; UN1789
- [Hydrochloric Acid 20% ACS Grade](https://alliancechemical.com/products/hydrochloric-acid-20-acs-grade): CAS 7647-01-0; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1789
- [Hydrochloric Acid 20% Technical Grade](https://alliancechemical.com/products/hydrochloric-acid-20-technical-grade): CAS 7647-01-0; sizes 1 Quart–330 Gallon; UN1789
- [Hydrochloric Acid 25% ACS Grade](https://alliancechemical.com/products/hydrochloric-acid-25-acs-grade): CAS 7647-01-0; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1789
- [Hydrochloric Acid 25% Technical Grade](https://alliancechemical.com/products/hydrochloric-acid-25-technical-grade): CAS 7647-01-0; sizes 1 Quart–330 Gallon; UN1789
- [Hydrochloric Acid 31% ACS Grade](https://alliancechemical.com/products/hydrochloric-acid-31-acs-grade): CAS 7647-01-0; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1789
- [Hydrochloric Acid 31% Technical Grade](https://alliancechemical.com/products/hydrochloric-acid-31-technical-grade): CAS 7647-01-0; sizes 1 Quart–330 Gallon; UN1789
- [Hydrochloric Acid 37% (HCL 37%) - Technical Grade](https://alliancechemical.com/products/hydrochloric-acid-37-hcl-37-technical-grade): CAS 7647-01-0; sizes 1 Quart–330 Gallon; UN1789
- [Hydrochloric Acid 37% ACS Reagent Grade](https://alliancechemical.com/products/hydrochloric-acid-37-acs-reagent-grade): CAS 7647-01-0; sizes 1 Quart–330 Gallon; UN1789
- [Hydrochloric Acid 5% ACS Grade](https://alliancechemical.com/products/hydrochloric-acid-5-acs-grade): CAS 7647-01-0; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1789
- [Hydrochloric Acid 5% Technical Grade](https://alliancechemical.com/products/hydrochloric-acid-5-technical-grade): CAS 7647-01-0; sizes 1 Quart–330 Gallon; UN1789
- [Hydrofluorosilicic Acid 23% (HFS)](https://alliancechemical.com/products/hydrofluorosilicic-acid-23-hfs): CAS 16961-83-4; Technical Grade; sizes 1 Quart–330 Gallon; UN1778
- [Hydrofluorosilicic Acid 23% ACS](https://alliancechemical.com/products/hydrofluorosilicic-acid-23-acs): CAS 16961-83-4; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1778
- [Nitric Acid 20% Technical Grade](https://alliancechemical.com/products/nitric-acid-20): CAS 7697-37-2; sizes 1 Liter–55 Gallon; UN2031
- [Nitric Acid 25% Technical Grade](https://alliancechemical.com/products/nitric-acid-25): CAS 7697-37-2; sizes 1 Liter–55 Gallon; UN2031
- [Nitric Acid 40% Technical Grade](https://alliancechemical.com/products/nitric-acid-40): CAS 7697-37-2; sizes 1 Liter–55 Gallon; UN2031
- [Nitric Acid 5% Technical Grade](https://alliancechemical.com/products/nitric-acid-5): CAS 7697-37-2; sizes 1 Liter–55 Gallon; UN2031
- [Nitric Acid 65% ACS Grade](https://alliancechemical.com/products/nitric-acid-65): CAS 7697-37-2; ACS Reagent Grade; sizes 1 Liter–55 Gallon; UN2031
- [Nitric Acid 65% Technical Grade](https://alliancechemical.com/products/nitric-acid-65-technical-grade): CAS 7697-37-2; sizes 1 Liter–55 Gallon; UN2031
- [Nitric Acid 69% Technical Grade](https://alliancechemical.com/products/nitric-acid-69-technical-grade): CAS 7697-37-2; size 55 Gallon; UN2031
- [Nitric Acid 70% ACS Grade - Low Particle](https://alliancechemical.com/products/nitric-acid-70-acs-grade-low-particle): CAS 7697-37-2; ACS Reagent Grade; sizes 1 Liter–55 Gallon; UN2031
- [Nitric Acid 70% Technical Grade](https://alliancechemical.com/products/nitric-acid-70-technical-grade): CAS 7697-37-2; sizes 1 Liter–55 Gallon; UN2031
- [Nitric Acid ACS 69% - 55 Gallon Drum](https://alliancechemical.com/products/nitric-acid-acs-69-55-gallon-drum): CAS 7697-37-2; ACS Reagent Grade; size 55 Gallon; UN2031
- [Oxalic Acid ACS Grade](https://alliancechemical.com/products/oxalic-acid-acs-grade): CAS 6153-56-6; ACS Reagent Grade; 99.6%; sizes 2 lb–55 lb
- [Oxalic Acid, Dihydrate - Ethanedioic Acid Technical Grade](https://alliancechemical.com/products/oxalic-acid-dihydrate-ethanedioic-acid): CAS 6153-56-6; sizes 2 lb–55 lb
- [pH-Ree Fall - World Class Buffering Solution For PH Stability Made From Phosphoric Acid Technical Grade](https://alliancechemical.com/products/ph-ree-fall-world-class-buffering-solution-for-ph-stability-made-from-phosphoric-acid): CAS 7664-38-2; 30%; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 10% ACS Grade](https://alliancechemical.com/products/phosphoric-acid-10-acs-grade): CAS 7664-38-2; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 10% Food Grade](https://alliancechemical.com/products/phosphoric-acid-10-food-grade): CAS 7664-38-2; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 10% Technical Grade](https://alliancechemical.com/products/phosphoric-acid-10-technical-grade): CAS 7664-38-2; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 15% ACS Grade](https://alliancechemical.com/products/phosphoric-acid-15-acs-grade): CAS 7664-38-2; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 15% Food Grade](https://alliancechemical.com/products/phosphoric-acid-15-food-grade): CAS 7664-38-2; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 15% Technical Grade](https://alliancechemical.com/products/phosphoric-acid-15-technical-grade): CAS 7664-38-2; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 20% ACS Grade](https://alliancechemical.com/products/phosphoric-acid-20-acs-grade): CAS 7664-38-2; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 20% Food Grade](https://alliancechemical.com/products/phosphoric-acid-20-food-grade): CAS 7664-38-2; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 20% Technical Grade](https://alliancechemical.com/products/phosphoric-acid-20-technical-grade): CAS 7664-38-2; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 30% - The Ultimate Rust Remover Solution Technical Grade](https://alliancechemical.com/products/phosphoric-acid-30-the-ultimate-rust-remover-solution): CAS 7664-38-2; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 30% ACS Grade](https://alliancechemical.com/products/phosphoric-acid-30-acs-grade): CAS 7664-38-2; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 45% ACS Grade](https://alliancechemical.com/products/phosphoric-acid-45-acs-grade): CAS 7664-38-2; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 45% Food Grade](https://alliancechemical.com/products/phosphoric-acid-45-food-grade): CAS 7664-38-2; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 45% Technical Grade](https://alliancechemical.com/products/phosphoric-acid-45-technical-grade): CAS 7664-38-2; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 5% ACS Grade](https://alliancechemical.com/products/phosphoric-acid-5-acs-grade): CAS 7664-38-2; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 5% Food Grade](https://alliancechemical.com/products/phosphoric-acid-5-food-grade): CAS 7664-38-2; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 5% Technical Grade](https://alliancechemical.com/products/phosphoric-acid-5-technical-grade): CAS 7664-38-2; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 50% ACS Grade](https://alliancechemical.com/products/phosphoric-acid-50-acs-grade): CAS 7664-38-2; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 50% Food Grade](https://alliancechemical.com/products/phosphoric-acid-50-food-grade): CAS 7664-38-2; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 50% Technical Grade](https://alliancechemical.com/products/phosphoric-acid-50-technical-grade): CAS 7664-38-2; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 75 ACS Grade](https://alliancechemical.com/products/phosphoric-acid-75-acs-grade): CAS 7664-38-2; ACS Reagent Grade; 75%; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 75% Technical Grade](https://alliancechemical.com/products/phosphoric-acid-75): CAS 7664-38-2; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 75% USP Food Grade](https://alliancechemical.com/products/phosphoric-acid-75-usp-food-grade): CAS 7664-38-2; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 85% - Technical Grade](https://alliancechemical.com/products/phosphoric-acid-85-technical-grade): CAS 7664-38-2; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 85% ACS Grade](https://alliancechemical.com/products/phosphoric-acid-85-acs-grade): CAS 7664-38-2; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1805
- [Phosphoric Acid 85% USP Food Grade](https://alliancechemical.com/products/phosphoric-acid-85-usp-food-grade): CAS 7664-38-2; sizes 1 Quart–330 Gallon; UN1805
- [Sulfuric Acid 30% Technical Grade](https://alliancechemical.com/products/sulfuric-acid-30): CAS 7664-93-9; sizes 1 Quart–330 Gallon; UN2796
- [Sulfuric Acid 37% - Battery Acid Technical Grade](https://alliancechemical.com/products/sulfuric-acid-37-battery-acid): CAS 7664-93-9; sizes 1 Quart–330 Gallon; UN2796
- [Sulfuric Acid 50% - Electrolyte Grade](https://alliancechemical.com/products/sulfuric-acid-50-electrolyte-grade): CAS 7664-93-9; sizes 1 Quart–330 Gallon; UN2796
- [Sulfuric Acid 70% Technical Grade](https://alliancechemical.com/products/sulfuric-acid-70): CAS 7664-93-9; sizes 1 Quart–330 Gallon; UN1830
- [Sulfuric Acid 93% Technical Grade](https://alliancechemical.com/products/sulfuric-acid-93-technical-grade): CAS 7664-93-9; sizes 1 Quart–330 Gallon; UN1830
- [Sulfuric Acid 96% ACS Grade](https://alliancechemical.com/products/sulfuric-acid-96-acs-grade): CAS 7664-93-9; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1830

## Products: Solvents (62)

- [60/40 Methanol/ DI Water Solution Technical Grade](https://alliancechemical.com/products/60-40-methanol-di-water-solution): CAS 67-56-1; 60%; sizes 1 Quart–330 Gallon; UN1230
- [60/40 Methanol/DI Water Solution ACS Grade](https://alliancechemical.com/products/60-40-methanol-di-water-solution-acs-grade): CAS 67-56-1; ACS Reagent Grade; 60%; sizes 1 Quart–330 Gallon; UN1230
- [A-A-59601E Type III ACS Grade](https://alliancechemical.com/products/a-a-59601e-type-iii-acs-grade): CAS 64742-47-8; ACS Reagent Grade; sizes 1 Quart–330 Gallon
- [A-A-59601E Type III Technical Grade](https://alliancechemical.com/products/a-a-59601e-type-iii): CAS 64742-47-8; sizes 1 Quart–330 Gallon
- [Acetone ACS Grade](https://alliancechemical.com/products/acetone-acs-grade): CAS 67-64-1; ACS Reagent Grade; 99.5%; sizes 1 Pint–330 Gallon; UN1090
- [Acetone Technical Grade](https://alliancechemical.com/products/acetone-technical-grade): CAS 67-64-1; 100%; sizes 1 Pint–330 Gallon; UN1090
- [Amyl Acetate](https://alliancechemical.com/products/amyl-acetate): CAS 628-63-7; Technical Grade; 100%; sizes 1 Quart–330 Gallon; UN1104
- [Amyl Acetate ACS Grade](https://alliancechemical.com/products/amyl-acetate-acs-grade): CAS 628-63-7; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1104
- [Blendpro - Professional Paint Thinning Solution Technical Grade](https://alliancechemical.com/products/blendpro-professional-paint-thinning-solution): sizes 1 Quart–55 Gallon; UN1263
- [Cyclohexanone ACS Grade](https://alliancechemical.com/products/cyclohexanone-acs-grade): CAS 108-94-1; ACS Reagent Grade; sizes 1 Liter–55 Gallon; UN1915
- [Cyclohexanone Technical Grade](https://alliancechemical.com/products/cyclohexanone-technical-grade): CAS 108-94-1; sizes 1 Liter–55 Gallon; UN1915
- [D-Limonene 94% - Food Grade](https://alliancechemical.com/products/d-limonene-food-grade): CAS 5989-27-5; sizes 1 Quart–330 Gallon; UN2319
- [D-Limonene Technical Grade](https://alliancechemical.com/products/d-limonene-technical-grade): CAS 5989-27-5; 100%; sizes 1 Quart–55 Gallon; UN2319
- [Denatured Alcohol 190 Proof 3A Technical Grade](https://alliancechemical.com/products/denatured-alcohol-190-proof-3a): CAS 64-17-5; 95%; sizes 1 Quart–330 Gallon; UN1987
- [Denatured Alcohol 190 Proof 3C Technical Grade](https://alliancechemical.com/products/denatured-alcohol-190-proof-3c): CAS 64-17-5; 95%; sizes 1 Quart–330 Gallon; UN1987
- [Denatured Alcohol 200 Proof 3A Technical Grade](https://alliancechemical.com/products/denatured-alcohol-200-proof-3a): CAS 64-17-5; 100%; sizes 1 Quart–330 Gallon; UN1987
- [Denatured Alcohol 200 Proof 3C Technical Grade](https://alliancechemical.com/products/denatured-alcohol-200-proof-3c): CAS 64-17-5; 100%; sizes 1 Quart–330 Gallon; UN1987
- [Ethyl Acetate ACS](https://alliancechemical.com/products/ethyl-acetate-acs): CAS 141-78-6; ACS Reagent Grade; sizes 1 Quart–55 Gallon; UN1173
- [Ethyl Acetate Technical Grade](https://alliancechemical.com/products/ethyl-acetate): CAS 141-78-6; sizes 1 Quart–55 Gallon; UN1173
- [Hexane ACS Reagent Grade](https://alliancechemical.com/products/hexane-acs-reagent-grade): CAS 110-54-3; 98.5%; sizes 1 Quart–55 Gallon; UN1208
- [Hexane Technical Grade](https://alliancechemical.com/products/hexane-technical-grade-1): CAS 110-54-3; sizes 1 Quart–55 Gallon; UN1208
- [Isobutyl Alcohol 99% ACS Grade](https://alliancechemical.com/products/isobutyl-alcohol-99-acs-grade): CAS 78-83-1; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1212
- [Isobutyl Alcohol 99% Technical Grade](https://alliancechemical.com/products/isobutyl-alcohol-99): CAS 78-83-1; sizes 1 Quart–330 Gallon; UN1212
- [Isopropyl Acetate 99.98% ACS Grade](https://alliancechemical.com/products/isopropyl-acetate-99-98-acs-grade): CAS 108-21-4; ACS Reagent Grade; sizes 1 Quart–55 Gallon; UN1220
- [Isopropyl Acetate 99.98% Technical Grade](https://alliancechemical.com/products/isopropyl-acetate-99-98): CAS 108-21-4; sizes 1 Quart–330 Gallon; UN1220
- [Isopropyl Alcohol 50% Technical Grade](https://alliancechemical.com/products/isopropyl-alcohol-50-technical-grade): CAS 67-63-0; sizes 1 Quart–330 Gallon; UN1219
- [Isopropyl Alcohol 50% USP Grade](https://alliancechemical.com/products/isopropyl-alcohol-50-usp-grade): CAS 67-63-0; sizes 1 Quart–330 Gallon; UN1219
- [Isopropyl Alcohol 60% Technical Grade](https://alliancechemical.com/products/isopropyl-alcohol-60-technical-grade): CAS 67-63-0; sizes 1 Quart–330 Gallon; UN1219
- [Isopropyl Alcohol 60% USP Grade](https://alliancechemical.com/products/isopropyl-alcohol-60-usp-grade): CAS 67-63-0; sizes 1 Quart–330 Gallon; UN1219
- [Isopropyl Alcohol 70% USP Grade](https://alliancechemical.com/products/isopropyl-alcohol-70-usp-grade): CAS 67-63-0; sizes 1 Quart–330 Gallon; UN1219
- [Isopropyl Alcohol 91%- USP Grade](https://alliancechemical.com/products/isopropyl-alcohol-91): CAS 67-63-0; sizes 1 Quart–330 Gallon; UN1219
- [Isopropyl Alcohol 99.9% ACS Reagent Grade](https://alliancechemical.com/products/isopropyl-alcohol-99-9-acs-reagent-grade): CAS 67-63-0; sizes 1 Quart–330 Gallon; UN1219
- [Isopropyl Alcohol 99% - Technical Grade](https://alliancechemical.com/products/isopropyl-alcohol-99): CAS 67-63-0; sizes 1 Quart–330 Gallon; UN1219
- [Kerosene - K1 Clean Burning Fuel](https://alliancechemical.com/products/kerosene-k1-clean-burning-fuel): CAS 8008-20-6; Technical Grade; sizes 1 Quart–330 Gallon; UN1223
- [Methanol ACS Reagent Grade](https://alliancechemical.com/products/methanol-acs-reagent-grade): CAS 67-56-1; 99.8%; sizes 1 Quart–330 Gallon; UN1230
- [Methanol Technical Grade](https://alliancechemical.com/products/methanol-technical-grade): CAS 67-56-1; 100%; sizes 1 Quart–330 Gallon; UN1230
- [Methyl Ethyl Ketone (MEK) ACS Grade](https://alliancechemical.com/products/methyl-ethyl-ketone-mek-acs-grade): CAS 78-93-3; ACS Reagent Grade; sizes 1 Quart–55 Gallon; UN1193
- [Methyl Ethyl Ketone (MEK) Technical Grade](https://alliancechemical.com/products/methyl-ethyl-ketone-mek): CAS 78-93-3; 100%; sizes 1 Quart–55 Gallon; UN1193
- [Methyl Isobutyl Ketone (MIBK) ACS Grade](https://alliancechemical.com/products/methyl-isobutyl-ketone-mibk-acs-grade): CAS 108-10-1; ACS Reagent Grade; sizes 1 Quart–55 Gallon; UN1245
- [Methyl Isobutyl Ketone (MIBK) Technical Grade](https://alliancechemical.com/products/methyl-isobutyl-ketone-mibk-technical-grade): CAS 108-10-1; sizes 1 Quart–55 Gallon; UN1245
- [Methyl n-Amyl Ketone (MNAK) ACS Grade](https://alliancechemical.com/products/methyl-n-amyl-ketone-mnak-acs-grade): CAS 110-43-0; ACS Reagent Grade; sizes 1 Quart–55 Gallon; UN1110
- [Methyl n-Amyl Ketone (MNAK) Technical Grade](https://alliancechemical.com/products/methyl-n-amyl-ketone-mnak): CAS 110-43-0; sizes 1 Quart–55 Gallon; UN1110
- [Methyl n-Propyl Ketone (MPK) ACS](https://alliancechemical.com/products/methyl-n-propyl-ketone-mpk-acs): CAS 107-87-9; ACS Reagent Grade; sizes 1 Quart–55 Gallon; UN1249
- [Methyl n-Propyl Ketone (MPK) Technical Grade](https://alliancechemical.com/products/methyl-n-propyl-ketone-mpk): CAS 107-87-9; sizes 1 Quart–55 Gallon; UN1249
- [Mineral Spirits - Odorless Solvent & Thinner Technical Grade](https://alliancechemical.com/products/mineral-spirits): CAS 64742-47-8; C9-C15 Cycloalkanes: 60-100% C9-C15 Alkanes: 15-40; sizes 1 Quart–55 Gallon; UN1268
- [N-Butyl Acetate Technical Grade](https://alliancechemical.com/products/n-butyl-acetate): CAS 123-86-4; sizes 1 Quart–330 Gallon; UN1123
- [N-Butyl Alcohol Technical Grade](https://alliancechemical.com/products/n-butyl-alcohol): CAS 71-36-3; sizes 1 Quart–55 Gallon; UN1120
- [n-Heptane 99% ACS](https://alliancechemical.com/products/n-heptane-99-acs): CAS 142-82-5; ACS Reagent Grade; sizes 1 Pint–55 Gallon; UN1206
- [n-Heptane 99% Technical](https://alliancechemical.com/products/n-heptane-99-technical): CAS 142-82-5; Technical Grade; sizes 1 Pint–55 Gallon; UN1206
- [n-Propyl Alcohol ACS Grade](https://alliancechemical.com/products/n-propyl-alcohol-acs-grade): CAS 71-23-8; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1274
- [n-Propyl Alcohol Technical Grade](https://alliancechemical.com/products/n-propyl-alcohol): CAS 71-23-8; 98.8%; sizes 1 Quart–330 Gallon; UN1274
- [Perchloroethylene (PCE, PERC)](https://alliancechemical.com/products/perchloroethylene-pce-perc): CAS 127-18-4; Technical Grade; 100%; sizes 1 Quart–55 Gallon; UN1897
- [Perchloroethylene ACS Grade](https://alliancechemical.com/products/perchloroethylene-acs-grade): CAS 127-18-4; ACS Reagent Grade; sizes 1 Quart–55 Gallon; UN1897
- [Petroleum Ether ACS Reagent Grade](https://alliancechemical.com/products/petroleum-ether-acs-reagent-grade): CAS 8032-32-4; sizes 1 Liter–55 Gallon; UN1268
- [Petroleum Ether Technical Grade](https://alliancechemical.com/products/petroleum-ether-technical-grade): CAS 8032-32-4; sizes 1 Liter–55 Gallon; UN1268
- [Tert Butyl Acetate (TBA) Technical Grade](https://alliancechemical.com/products/tert-butyl-acetate-tba): CAS 540-88-5; 100%; sizes 1 Quart–55 Gallon; UN1123
- [Toluene](https://alliancechemical.com/products/toluene): CAS 108-88-3; Technical Grade; 99.5%; sizes 1 Quart–55 Gallon; UN1294
- [Trichloroethylene (TCE) ACS Grade](https://alliancechemical.com/products/trichloroethylene-tce-acs-grade): CAS 79-01-6; ACS Reagent Grade; sizes 1 Quart–55 Gallon; UN1710
- [Trichloroethylene (TCE) Technical Grade](https://alliancechemical.com/products/trichloroethylene-tce-technical-grade): CAS 79-01-6; sizes 1 Quart–55 Gallon; UN1710
- [VM&P Naphtha Technical Grade](https://alliancechemical.com/products/vm-p-naphtha): CAS 64742-89-8; sizes 1 Quart–330 Gallon; UN1268
- [Xylene ACS Grade](https://alliancechemical.com/products/xylene-acs-grade): CAS 1330-20-7; ACS Reagent Grade; 98.5%; sizes 1 Quart–55 Gallon; UN1307
- [Xylene Technical Grade](https://alliancechemical.com/products/xylene): CAS 1330-20-7; sizes 1 Quart–55 Gallon; UN1307

## Products: Glycols (49)

- [100% Ethylene Glycol Inhibited](https://alliancechemical.com/products/100-ethylene-glycol-inhibited): CAS 107-21-1; sizes 1 Quart–330 Gallon
- [100% Propylene Glycol Inhibited](https://alliancechemical.com/products/100-propylene-glycol-inhibited): CAS 57-55-6; sizes 1 Quart–330 Gallon
- [30% Propylene Glycol Inhibited](https://alliancechemical.com/products/30-propylene-glycol-inhibited): CAS 57-55-6; sizes 1 Quart–330 Gallon
- [30% Propylene Glycol Technical Grade](https://alliancechemical.com/products/30-propylene-glycol-technical-grade): CAS 57-55-6; sizes 1 Quart–330 Gallon
- [30% Propylene Glycol USP Grade](https://alliancechemical.com/products/30-propylene-glycol-usp-grade): CAS 57-55-6; sizes 1 Quart–330 Gallon
- [40% Propylene Glycol Inhibited](https://alliancechemical.com/products/40-propylene-glycol-inhibited): CAS 57-55-6; sizes 1 Quart–330 Gallon
- [50% Propylene Glycol Inhibited](https://alliancechemical.com/products/50-propylene-glycol-inhibited): CAS 57-55-6; sizes 1 Quart–330 Gallon
- [50% Propylene Glycol Technical Grade](https://alliancechemical.com/products/50-propylene-glycol-technical-grade): CAS 57-55-6; sizes 1 Quart–330 Gallon
- [Arctic Assist 50/50 Technical Grade](https://alliancechemical.com/products/arctic-assist-50-50): CAS 57-55-6; 50%; sizes 1 Quart–330 Gallon
- [Arctic Assist 60/40 Technical Grade](https://alliancechemical.com/products/arctic-assist-60-40): CAS 57-55-6; 60%; sizes 1 Quart–330 Gallon
- [Arctic Assist Technical Grade](https://alliancechemical.com/products/arctic-assist): CAS 57-55-6; 100%; sizes 1 Quart–330 Gallon
- [Ethylene Glycol 30/70 Technical Grade](https://alliancechemical.com/products/ethylene-glycol-30-70): CAS 107-21-1; 30%; sizes 1 Quart–330 Gallon
- [Ethylene Glycol 40/60](https://alliancechemical.com/products/ethylene-glycol-40-60): CAS 107-21-1; Technical Grade; sizes 1 Quart–330 Gallon
- [Ethylene Glycol 50/50 Technical Grade](https://alliancechemical.com/products/ethylene-glycol-50-50): CAS 107-21-1; 50%; sizes 1 Quart–330 Gallon
- [Ethylene Glycol 60/40](https://alliancechemical.com/products/ethylene-glycol-60-40): CAS 107-21-1; Technical Grade; 60%; sizes 1 Quart–330 Gallon
- [Ethylene Glycol ACS Grade](https://alliancechemical.com/products/ethylene-glycol-acs-grade): CAS 107-21-1; ACS Reagent Grade; sizes 1 Quart–330 Gallon
- [Ethylene Glycol Inhibited ACS Grade](https://alliancechemical.com/products/ethylene-glycol-inhibited-acs-grade): CAS 107-21-1; ACS Reagent Grade; 100%; sizes 1 Quart–330 Gallon
- [Ethylene Glycol Semiconductor Grade](https://alliancechemical.com/products/ethylene-glycol-semiconductor-grade): CAS 107-21-1; 100%; sizes 1 Quart–330 Gallon
- [Glycerin 25% Food Grade](https://alliancechemical.com/products/glycerin-25-food-grade): CAS 56-81-5; sizes 1 Quart–330 Gallon
- [Glycerin 50% Food Grade](https://alliancechemical.com/products/glycerin-50-food-grade): CAS 56-81-5; sizes 1 Quart–330 Gallon
- [Glycerin 75% Food Grade](https://alliancechemical.com/products/glycerin-75-food-grade): CAS 56-81-5; sizes 1 Quart–330 Gallon
- [Glycerin Technical Grade](https://alliancechemical.com/products/glycerin-technical-grade): CAS 56-81-5; 100%; sizes 1 Quart–330 Gallon
- [Glycerin USP Grade](https://alliancechemical.com/products/glycerin-usp-grade): CAS 56-81-5; 100%; sizes 1 Quart–330 Gallon
- [Glycol Ether EE ACS](https://alliancechemical.com/products/glycol-ether-ee-acs): CAS 110-80-5; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1171
- [Glycol Ether EE Technical Grade](https://alliancechemical.com/products/glycol-ether-ee): CAS 110-80-5; sizes 1 Quart–330 Gallon; UN1171
- [Inhibited Ethylene Glycol 20/80 with OAT-908 — Data Center Coolant](https://alliancechemical.com/products/inhibited-ethylene-glycol-20-80-with-oat-908-data-center-coolant): CAS 107-21-1; sizes 1 Quart–330 Gallon
- [Inhibited Ethylene Glycol 30/70 with OAT-908 — Data Center Coolant](https://alliancechemical.com/products/inhibited-ethylene-glycol-30-70-with-oat-908-data-center-coolant): CAS 107-21-1; 30%; sizes 1 Quart–330 Gallon
- [Inhibited Ethylene Glycol 35/65 with OAT-908 — Data Center Coolant](https://alliancechemical.com/products/inhibited-ethylene-glycol-35-65-with-oat-908-data-center-coolant): CAS 107-21-1; 35%; sizes 1 Quart–330 Gallon
- [Inhibited Ethylene Glycol 40/60 with OAT-908 — Data Center Coolant](https://alliancechemical.com/products/inhibited-ethylene-glycol-40-60-with-oat-908-data-center-coolant): CAS 107-21-1; 40%; sizes 1 Quart–330 Gallon
- [Inhibited Ethylene Glycol 50/50 with OAT-908 — Data Center Coolant](https://alliancechemical.com/products/inhibited-ethylene-glycol-50-50-with-oat-908-data-center-coolant): CAS 107-21-1; 50%; sizes 1 Quart–330 Gallon
- [Inhibited Propylene Glycol 20/80 with OAT Inhibitor — Data Center Coolant](https://alliancechemical.com/products/inhibited-propylene-glycol-20-80-with-oat-inhibitor-data-center-coolant): CAS 57-55-6; sizes 1 Quart–330 Gallon
- [Inhibited Propylene Glycol 25/75 with OAT Inhibitor — Data Center Coolant](https://alliancechemical.com/products/inhibited-propylene-glycol-25-75-with-oat-inhibitor-data-center-coolant): CAS 57-55-6; 25%; sizes 1 Quart–330 Gallon
- [Inhibited Propylene Glycol 30/70 with OAT Inhibitor — Data Center Coolant](https://alliancechemical.com/products/inhibited-propylene-glycol-30-70-with-oat-inhibitor-heat-transfer-fluid): CAS 57-55-6; 30%; sizes 1 Quart–330 Gallon
- [Inhibited Propylene Glycol 35/65 with OAT Inhibitor — Data Center Coolant](https://alliancechemical.com/products/inhibited-propylene-glycol-35-65-with-oat-inhibitor-data-center-coolant): CAS 57-55-6; 35%; sizes 1 Quart–330 Gallon
- [Inhibited Propylene Glycol 40/60 with OAT Inhibitor — Data Center Coolant](https://alliancechemical.com/products/inhibited-propylene-glycol-40-60-with-oat-inhibitor-heat-transfer-fluid): CAS 57-55-6; 40%; sizes 1 Quart–330 Gallon
- [Inhibited Propylene Glycol 50/50 with OAT Inhibitor — Data Center Coolant](https://alliancechemical.com/products/inhibited-propylene-glycol-50-50-with-oat-inhibitor-heat-transfer-fluid): CAS 57-55-6; 50%; sizes 1 Quart–330 Gallon
- [Polyethylene Glycol 200 (PEG 200) - Technical Grade](https://alliancechemical.com/products/polyethylene-glycol-200-peg-200-technical-grade): CAS 25322-68-3; sizes 1 Quart–330 Gallon
- [Propylene Glycol 20% Inhibited](https://alliancechemical.com/products/propylene-glycol-20-inhibited): CAS 57-55-6; sizes 1 Quart–330 Gallon
- [Propylene Glycol 20% Technical Grade](https://alliancechemical.com/products/propylene-glycol-20-technical-grade): CAS 57-55-6; sizes 1 Quart–330 Gallon
- [Propylene Glycol 20% USP GRADE](https://alliancechemical.com/products/propylene-glycol-20-usp-grade): CAS 57-55-6; sizes 1 Quart–330 Gallon
- [Propylene Glycol 40% – Technical Grade](https://alliancechemical.com/products/40-propylene-glycol-technical-grade): CAS 57-55-6; sizes 1 Quart–330 Gallon
- [Propylene Glycol 40% – USP Grade (C3H8O2)](https://alliancechemical.com/products/40-propylene-glycol-usp-grade): CAS 57-55-6; sizes 1 Quart–330 Gallon
- [Propylene Glycol 50% – USP Grade (C3H8O2)](https://alliancechemical.com/products/50-propylene-glycol-usp-grade): CAS 57-55-6; sizes 1 Quart–330 Gallon
- [Propylene Glycol 60% Inhibited](https://alliancechemical.com/products/propylene-glycol-60-inhibited): CAS 57-55-6; sizes 1 Quart–330 Gallon
- [Propylene Glycol 60% Technical Grade](https://alliancechemical.com/products/propylene-glycol-60-technical-grade): CAS 57-55-6; sizes 1 Quart–330 Gallon
- [Propylene Glycol 60% USP Grade](https://alliancechemical.com/products/propylene-glycol-60-usp-grade): CAS 57-55-6; sizes 1 Quart–330 Gallon
- [Propylene Glycol Inhibited ACS Grade](https://alliancechemical.com/products/propylene-glycol-inhibited-acs-grade): CAS 57-55-6; ACS Reagent Grade; 100%; sizes 1 Quart–330 Gallon
- [Propylene Glycol Technical Grade](https://alliancechemical.com/products/propylene-glycol-technical-grade): CAS 57-55-6; 100%; sizes 1 Quart–330 Gallon
- [Propylene Glycol USP Grade](https://alliancechemical.com/products/propylene-glycol-usp-grade): CAS 57-55-6; 100%; sizes 1 Quart–330 Gallon

## Products: Bases (38)

- [Ammonium Hydroxide 10% ACS Grade](https://alliancechemical.com/products/ammonium-hydroxide-10-acs-grade): CAS 1336-21-6; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN2672
- [Ammonium Hydroxide 10% Technical Grade](https://alliancechemical.com/products/ammonium-hydroxide-10-technical-grade): CAS 1336-21-6; sizes 1 Quart–330 Gallon; UN2672
- [Ammonium Hydroxide 15% ACS Grade](https://alliancechemical.com/products/ammonium-hydroxide-15-acs-grade): CAS 1336-21-6; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN2672
- [Ammonium Hydroxide 15% Technical Grade](https://alliancechemical.com/products/ammonium-hydroxide-15-technical-grade): CAS 1336-21-6; sizes 1 Quart–330 Gallon; UN2672
- [Ammonium Hydroxide 20% ACS Grade](https://alliancechemical.com/products/ammonium-hydroxide-20-acs-grade): CAS 1336-21-6; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN2672
- [Ammonium Hydroxide 20% Technical Grade](https://alliancechemical.com/products/ammonium-hydroxide-20-technical-grade): CAS 1336-21-6; sizes 1 Quart–330 Gallon; UN2672
- [Ammonium Hydroxide 29% ACS Grade](https://alliancechemical.com/products/ammonium-hydroxide-29-acs-grade): CAS 1336-21-6; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN2672
- [Ammonium Hydroxide 29% Technical Grade](https://alliancechemical.com/products/ammonium-hydroxide-29-technical-grade): CAS 1336-21-6; sizes 1 Quart–330 Gallon; UN2672
- [Ammonium Hydroxide 5% ACS Grade](https://alliancechemical.com/products/ammonium-hydroxide-5-acs-grade): CAS 1336-21-6; ACS Reagent Grade; sizes 1 Quart–330 Gallon
- [Ammonium Hydroxide 5% Technical Grade](https://alliancechemical.com/products/ammonium-hydroxide-5-technical-grade): CAS 1336-21-6; sizes 1 Quart–330 Gallon
- [Gleam Guru - Ammonia Cleaning Solution Technical Grade](https://alliancechemical.com/products/gleam-guru-ammonia-cleaning-solution): CAS 1336-21-6; 8%; sizes 1 Quart–330 Gallon
- [Komodo Drain Cleaner Technical Grade](https://alliancechemical.com/products/komodo-drain-cleaner): CAS 1310-73-2; 100%; sizes 2 lb–55 lb; UN1823
- [Magnesium Hydroxide ACS](https://alliancechemical.com/products/magnesium-hydroxide-acs): CAS 1309-42-8; ACS Reagent Grade; sizes 2 lb–55 lb
- [Magnesium Hydroxide Technical](https://alliancechemical.com/products/magnesium-hydroxide-technical): CAS 1309-42-8; Technical Grade; sizes 2 lb–55 lb
- [Monoethanolamine (MEA) ACS Grade](https://alliancechemical.com/products/monoethanolamine-mea-acs-grade): CAS 141-43-5; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN2491
- [Monoethanolamine (MEA) Technical Grade](https://alliancechemical.com/products/monoethanolamine-mea): CAS 141-43-5; 100%; sizes 1 Quart–330 Gallon; UN2491
- [Potassium Hydroxide (KOH) Technical Grade](https://alliancechemical.com/products/potassium-hydroxide-flakes-koh): CAS 1310-58-3; sizes 2 lb–55 lb; UN1813
- [Potassium Hydroxide 25% Solution Technical Grade](https://alliancechemical.com/products/potassium-hydroxide-25-solution-technical-grade-caustic-potash-liquid-koh): CAS 1310-58-3; sizes 1 Quart–330 Gallon; UN1814
- [Potassium Hydroxide 30% Solution Technical Grade](https://alliancechemical.com/products/potassium-hydroxide-30-solution-technical-grade): CAS 1310-58-3; sizes 1 Quart–330 Gallon; UN1814
- [Potassium Hydroxide 45% Solution ACS Grade](https://alliancechemical.com/products/potassium-hydroxide-45-solution-acs-grade): CAS 1310-58-3; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1814
- [Potassium Hydroxide 45% Solution Technical Grade](https://alliancechemical.com/products/potassium-hydroxide-45-solution-technical-grade-caustic-potash-liquid-koh): CAS 1310-58-3; sizes 1 Quart–330 Gallon; UN1814
- [Potassium Hydroxide Flakes ACS Grade](https://alliancechemical.com/products/potassium-hydroxide-flakes-acs-grade): CAS 1310-58-3; ACS Reagent Grade; sizes 2 lb–55 lb; UN1813
- [Sodium Hydroxide 10% ACS Grade](https://alliancechemical.com/products/sodium-hydroxide-10-acs-grade): CAS 1310-73-2; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1824
- [Sodium Hydroxide 10% Technical Grade](https://alliancechemical.com/products/sodium-hydroxide-10-technical-grade): CAS 1310-73-2; sizes 1 Quart–330 Gallon; UN1824
- [Sodium Hydroxide 15% ACS Grade](https://alliancechemical.com/products/sodium-hydroxide-15-acs-grade): CAS 1310-73-2; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1824
- [Sodium Hydroxide 15% Technical Grade](https://alliancechemical.com/products/sodium-hydroxide-15-technical-grade): CAS 1310-73-2; sizes 1 Quart–330 Gallon; UN1824
- [Sodium Hydroxide 20% ACS Grade](https://alliancechemical.com/products/sodium-hydroxide-20-acs-grade): CAS 1310-73-2; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1824
- [Sodium Hydroxide 20% Technical Grade](https://alliancechemical.com/products/sodium-hydroxide-20-technical-grade): CAS 1310-73-2; sizes 1 Quart–330 Gallon; UN1824
- [Sodium Hydroxide 25% ACS Grade](https://alliancechemical.com/products/sodium-hydroxide-25-acs-grade): CAS 1310-73-2; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1824
- [Sodium Hydroxide 25% Technical Grade](https://alliancechemical.com/products/sodium-hydroxide-25): CAS 1310-73-2; sizes 1 Quart–330 Gallon; UN1824
- [Sodium Hydroxide 30% ACS Grade](https://alliancechemical.com/products/sodium-hydroxide-30-acs-grade): CAS 1310-73-2; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1824
- [Sodium Hydroxide 30% Technical Grade](https://alliancechemical.com/products/sodium-hydroxide-30-technical-grade): CAS 1310-73-2; sizes 1 Quart–330 Gallon; UN1824
- [Sodium Hydroxide 5% ACS Grade](https://alliancechemical.com/products/sodium-hydroxide-5-acs-grade): CAS 1310-73-2; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1824
- [Sodium Hydroxide 5% Technical Grade](https://alliancechemical.com/products/sodium-hydroxide-5-technical-grade): CAS 1310-73-2; sizes 1 Quart–330 Gallon; UN1824
- [Sodium Hydroxide 50% Membrane Grade (Caustic Soda, Lye)](https://alliancechemical.com/products/sodium-hydroxide-50-membrane-grade-caustic-soda-lye): CAS 1310-73-2; sizes 1 Quart–330 Gallon; UN1824
- [Sodium Hydroxide 50% Solution ACS Grade](https://alliancechemical.com/products/sodium-hydroxide-50-solution-acs-grade): CAS 1310-73-2; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN1824
- [Sodium Hydroxide Flakes](https://alliancechemical.com/products/sodium-hydroxide-flakes): CAS 1310-73-2; Technical Grade; 100%; sizes 2 lb–55 lb; UN1823
- [Sodium Hydroxide Flakes ACS Grade](https://alliancechemical.com/products/sodium-hydroxide-flakes-acs-grade): CAS 1310-73-2; ACS Reagent Grade; sizes 2 lb–55 lb; UN1823

## Products: Salts (35)

- [Aluminum Sulfate 50%](https://alliancechemical.com/products/aluminum-sulfate-50): CAS 10043-01-3; Technical Grade; sizes 1 Quart–330 Gallon; UN3264
- [Aluminum Sulfate Hydrate ACS Grade](https://alliancechemical.com/products/aluminum-sulfate-hydrate-acs-grade): CAS 7784-31-8; ACS Reagent Grade; sizes 2 lb–50 lb
- [Ammonium Bifluoride Flakes ACS Grade](https://alliancechemical.com/products/ammonium-bifluoride-flakes-acs-grade): CAS 1341-49-7; ACS Reagent Grade; sizes 2 lb–40 x 55 lb (2200 lb); UN1727
- [Ammonium Bifluoride Flakes Technical Grade](https://alliancechemical.com/products/ammonium-bifluoride-flakes): CAS 1341-49-7; sizes 2 lb–55 lb; UN1727
- [Calcium Chloride Technical Grade](https://alliancechemical.com/products/calcium-chloride): CAS 10043-52-4; 94-97; sizes 2 lb–50 lb
- [Ferric Chloride 10% Water Treatment Grade](https://alliancechemical.com/products/ferric-chloride-10): CAS 7705-08-0; Technical Grade; sizes 1 Quart–330 Gallon; UN2582
- [Ferric Chloride 20% Water Treatment Grade](https://alliancechemical.com/products/ferric-chloride-20): CAS 7705-08-0; Technical Grade; sizes 1 Quart–330 Gallon; UN2582
- [Ferric Chloride 30% Water Treatment Grade](https://alliancechemical.com/products/ferric-chloride-30): CAS 7705-08-0; Technical Grade; sizes 1 Quart–330 Gallon; UN2582
- [Ferric Chloride 40% Water Treatment Grade](https://alliancechemical.com/products/ferric-chloride-40): CAS 7705-08-0; Technical Grade; sizes 1 Quart–330 Gallon; UN2582
- [Magnesium Chloride Hexahydrate FCC, USP GRADE](https://alliancechemical.com/products/magnesium-chloride-hexahydrate-fcc-usp-grade): CAS 7791-18-6; sizes 2 lb–2200 lb (40 Bags)
- [Potassium Bicarbonate - FCC USP Grade](https://alliancechemical.com/products/potassium-bicarbonate-fcc-usp-grade): CAS 298-14-6; sizes 2 lb–50 lb
- [Soda Ash Technical Grade](https://alliancechemical.com/products/soda-ash): CAS 497-19-8; 100%; sizes 2 lb–50 lb
- [Sodium Bisulfite 10% ACS Grade](https://alliancechemical.com/products/sodium-bisulfite-10-acs-grade): CAS 7631-90-5; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN2693
- [Sodium Bisulfite 10% Technical Grade](https://alliancechemical.com/products/sodium-bisulfite-10-technical-grade): CAS 7631-90-5; sizes 1 Quart–330 Gallon; UN2693
- [Sodium Bisulfite 15% ACS Grade](https://alliancechemical.com/products/sodium-bisulfite-15-acs-grade): CAS 7631-90-5; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN2693
- [Sodium Bisulfite 15% Technical Grade](https://alliancechemical.com/products/sodium-bisulfite-15-technical-grade): CAS 7631-90-5; sizes 1 Quart–330 Gallon; UN2693
- [Sodium Bisulfite 25% ACS Grade](https://alliancechemical.com/products/sodium-bisulfite-25-acs-grade): CAS 7631-90-5; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN2693
- [Sodium Bisulfite 25% Solution – Technical Grade (NaHSO3)](https://alliancechemical.com/products/sodium-bisulfite-25): CAS 7631-90-5; sizes 1 Quart–330 Gallon; UN2693
- [Sodium Bisulfite 40% ACS Grade](https://alliancechemical.com/products/sodium-bisulfite-40-acs-grade): CAS 7631-90-5; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN2693
- [Sodium Bisulfite 40% Technical Grade](https://alliancechemical.com/products/sodium-bisulfite-40): CAS 7631-90-5; sizes 1 Quart–330 Gallon; UN2693
- [Sodium Chloride Technical Grade](https://alliancechemical.com/products/sodium-chloride-technical-grade): CAS 7647-14-5; sizes 15 lb–50 lb
- [Sodium Hypochlorite 1%](https://alliancechemical.com/products/sodium-hypochlorite-1): CAS 7681-52-9; Technical Grade; sizes 1 Quart–330 Gallon; UN1791
- [Sodium Hypochlorite 10%](https://alliancechemical.com/products/sodium-hypochlorite-10): CAS 7681-52-9; Technical Grade; sizes 1 Quart–330 Gallon; UN1791
- [Sodium Hypochlorite 12.5%](https://alliancechemical.com/products/sodium-hypochlorite-12-5): CAS 7681-52-9; Water Treatment Grade; sizes 1 Quart–330 Gallon; UN1791
- [Sodium Hypochlorite 2%](https://alliancechemical.com/products/sodium-hypochlorite-2): CAS 7681-52-9; Technical Grade; sizes 1 Quart–330 Gallon; UN1791
- [Sodium Hypochlorite 3%](https://alliancechemical.com/products/sodium-hypochlorite-3): CAS 7681-52-9; Technical Grade; sizes 1 Quart–330 Gallon; UN1791
- [Sodium Hypochlorite 5.25%](https://alliancechemical.com/products/sodium-hypochlorite-5-25): CAS 7681-52-9; Water Treatment Grade; sizes 1 Quart–330 Gallon; UN1791
- [Sodium Hypochlorite 6%](https://alliancechemical.com/products/sodium-hypochlorite-6): CAS 7681-52-9; Technical Grade; sizes 1 Quart–330 Gallon; UN1791
- [Sodium Hypochlorite 8.25%](https://alliancechemical.com/products/sodium-hypochlorite-8-25): CAS 7681-52-9; Technical Grade; sizes 1 Quart–330 Gallon; UN1791
- [Sodium Metabisulfite - ACS Grade](https://alliancechemical.com/products/sodium-metabisulfite-acs-grade): CAS 7681-57-4; ACS Reagent Grade; sizes 2 lb–50 lb
- [Sodium Metabisulfite - Food Grade](https://alliancechemical.com/products/sodium-metabisulfite-food-grade): CAS 7681-57-4; sizes 2 lb–50 lb
- [Sodium Metabisulfite - Technical Grade](https://alliancechemical.com/products/sodium-metabisulfite-technical-grade): CAS 7681-57-4; sizes 2 lb–50 lb
- [Sodium Thiosulfate Technical Grade](https://alliancechemical.com/products/sodium-thiosulfate): CAS 10102-17-7; sizes 2 lb–55 lb
- [Trisodium EDTA Technical Grade](https://alliancechemical.com/products/trisodium-edta): CAS 150-38-9; sizes 2 lb–55 lb
- [Trisodium Phosphate Dodecahydrate - ACS Reagent Grade](https://alliancechemical.com/products/trisodium-phosphate-dodecahydrate-acs-reagent-grade): CAS 10101-89-0; sizes 2 lb–50 lb

## Products: Oxidizers (18)

- [Hydrogen Peroxide 10% ACS Grade](https://alliancechemical.com/products/hydrogen-peroxide-10-acs-grade): CAS 7722-84-1; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN2984
- [Hydrogen Peroxide 10% Technical Grade](https://alliancechemical.com/products/hydrogen-peroxide-10-technical-grade): CAS 7722-84-1; sizes 1 Quart–330 Gallon; UN2984
- [Hydrogen Peroxide 12% ACS Grade](https://alliancechemical.com/products/hydrogen-peroxide-12-acs-grade): CAS 7722-84-1; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN2984
- [Hydrogen Peroxide 12% Technical Grade](https://alliancechemical.com/products/hydrogen-peroxide-12-technical-grade): CAS 7722-84-1; sizes 1 Quart–330 Gallon; UN2984
- [Hydrogen Peroxide 15% ACS Grade](https://alliancechemical.com/products/hydrogen-peroxide-15-acs-grade): CAS 7722-84-1; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN2984
- [Hydrogen Peroxide 15% Technical Grade](https://alliancechemical.com/products/hydrogen-peroxide-15-technical-grade): CAS 7722-84-1; sizes 1 Quart–330 Gallon; UN2984
- [Hydrogen Peroxide 25% ACS Grade](https://alliancechemical.com/products/hydrogen-peroxide-25-acs-grade): CAS 7722-84-1; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN2014
- [Hydrogen Peroxide 25% Technical Grade](https://alliancechemical.com/products/hydrogen-peroxide-25-technical-grade): CAS 7722-84-1; sizes 1 Quart–330 Gallon; UN2014
- [Hydrogen Peroxide 3% Technical Grade](https://alliancechemical.com/products/hydrogen-peroxide-3-technical-grade): CAS 7722-84-1; sizes 1 Quart–330 Gallon
- [Hydrogen Peroxide 30% ACS Grade](https://alliancechemical.com/products/hydrogen-peroxide-30-acs-grade): CAS 7722-84-1; ACS Reagent Grade; sizes 1 Quart–330 Gallon; UN2014
- [Hydrogen Peroxide 30% Technical](https://alliancechemical.com/products/hydrogen-peroxide-30-technical): CAS 7722-84-1; Technical Grade; sizes 1 Quart–330 Gallon; UN2014
- [Hydrogen Peroxide 5% ACS Grade](https://alliancechemical.com/products/hydrogen-peroxide-5-acs-grade): CAS 7722-84-1; ACS Reagent Grade; sizes 1 Quart–330 Gallon
- [Hydrogen Peroxide 5% Technical Grade](https://alliancechemical.com/products/hydrogen-peroxide-5-technical-grade): CAS 7722-84-1; sizes 1 Quart–330 Gallon
- [Hydrogen Peroxide 6% ACS Grade](https://alliancechemical.com/products/hydrogen-peroxide-6-acs-grade): CAS 7722-84-1; ACS Reagent Grade; sizes 1 Quart–330 Gallon
- [Hydrogen Peroxide 6% Technical Grade](https://alliancechemical.com/products/hydrogen-peroxide-6-technical-grade): CAS 7722-84-1; sizes 1 Quart–330 Gallon
- [Sodium Chlorite Flakes 80% - ACS Grade](https://alliancechemical.com/products/sodium-chlorite-80-acs): CAS 7758-19-2; ACS Reagent Grade; size 100 lb; UN1496
- [Sodium Chlorite Flakes 80% - Technical Grade](https://alliancechemical.com/products/sodium-chlorite-80-technical): CAS 7758-19-2; size 100 lb; UN1496
- [Sodium Dichromate Technical Grade](https://alliancechemical.com/products/sodium-dichromate-dihydrate): CAS 7789-12-0; sizes 2 lb–55 lb; UN3288

## Products: Specialty Chemicals (10)

- [100% Pure Castor Oil ACS Grade](https://alliancechemical.com/products/100-pure-castor-oil-acs-grade): CAS 8001-79-4; ACS Reagent Grade; sizes 1 Quart–330 Gallon
- [100% Pure Castor Oil Technical Grade](https://alliancechemical.com/products/100-pure-castor-oil): CAS 8001-79-4; sizes 1 Quart–330 Gallon
- [100% USP Grade Pure Castor Oil](https://alliancechemical.com/products/100-usp-pure-castor-oil): CAS 8001-79-4; sizes 1 Quart–330 Gallon
- [Battery Water ACS Reagent Grade](https://alliancechemical.com/products/battery-water): CAS 7732-18-5; sizes 1 Quart–330 Gallon
- [Cadmium Oxide Powder ACS Reagent](https://alliancechemical.com/products/cadmium-oxide-powder-acs-reagent): CAS 1306-19-0; ACS Reagent Grade; sizes 1 lb–50 lb; UN2570
- [Cadmium Oxide Powder Technical](https://alliancechemical.com/products/cadmium-oxide-powder): CAS 1306-19-0; Technical Grade; sizes 1 lb–50 lb; UN2570
- [Deionized Water ACS Reagent Grade](https://alliancechemical.com/products/deionized-water): CAS 7732-18-5; 100%; sizes 1 Quart–330 Gallon
- [Talc Powder - White Colored Technical Grade](https://alliancechemical.com/products/talc-powder-white-colored): CAS 14807-96-6; sizes 2 lb–50 lb
- [Talc Powder ACS](https://alliancechemical.com/products/talc-powder-acs): CAS 14807-96-6; ACS Reagent Grade; sizes 2 lb–50 lb
- [Urea - Organic Nitrogen Technical Grade](https://alliancechemical.com/products/urea-organic-nitrogen): CAS 57-13-6; sizes 5 lb–50 lb

## Products: Lubricant (2)

- [Full Synthetic SAE 75W-90 Heavy Duty Gear Lubricant](https://alliancechemical.com/products/75w-90): CAS 64742-54-7; Technical Grade; sizes 1 Quart–55 Gallon
- [Full Synthetic SAE 85W-140 Heavy Duty Gear Lubricant](https://alliancechemical.com/products/85w-140): CAS 64742-54-7; Technical Grade; sizes 1 Quart–55 Gallon

## Products: Inorganic Compounds (1)

- [Organic Vermiculite - Fine Grade](https://alliancechemical.com/products/organic-vermiculite-fine-grade): CAS 1318-00-9; Technical Grade; sizes 1.5 lb Bag–2 Cubic Ft

## Products: Equipment & Packaging (5)

- [1 Gallon Clear HDPE Jug](https://alliancechemical.com/products/1-gallon-clear-hpde-jug): size 1 Gallon Clear HDPE Jug
- [55 Gallon Open Head Steel Recon Drum, UN Rated, Bolt Ring D Black](https://alliancechemical.com/products/55-gallon-open-head-steel-recon-drum-un-rated-bolt-ring-black)
- [Siphon Drum Pump for 5-Gallon Pails](https://alliancechemical.com/products/siphon-drum-pump-5-gallon): sizes 1 Pump–24 Pump
- [Siphon Drum Pump for 55-Gallon Drums](https://alliancechemical.com/products/siphon-drum-pump-55-gallon): sizes 1 Pump–24 Pump
- [Trigger Spray Nozzle — 28-400 Neck (Fits 1 Quart Bottles)](https://alliancechemical.com/products/trigger-spray-nozzle-28-400): sizes Single (1)–12-Pack

## Government (NSN) (41)

- [ALCOHOL, DENATURED — NSN 6810-00-577-4889](https://alliancechemical.com/products/nsn-6810-00-577-4889): CAS 64-17-5; pack 1.0 QUART; spec O-E-760D(2) NOT 3; quote only
- [ALCOHOL, DENATURED (Type IV) — NSN 6810-00-205-6790](https://alliancechemical.com/products/nsn-6810-00-205-6790): CAS 64-17-5; pack 4 FL OZ; spec O-E-760D; quote only
- [AMMONIUM HYDROXIDE, TECHNICAL — NSN 6810-00-584-3793](https://alliancechemical.com/products/nsn-6810-00-584-3793): CAS 1336-21-6; pack 1 PT EQUATES A GLASS BOTTLE THAT CONTAINS 16.0 FL OZ; spec CID A-A-59370B NOT 1; quote only
- [ANTIFREEZE (VIRGIN GRADE) — NSN 6850-01-383-4068](https://alliancechemical.com/products/nsn-6850-01-383-4068): CAS 57-55-6; pack 1.0 GALLONS; spec A-A-52624A; quote only
- [CITRIC ACID, MONOHYDRATE (ACS) — NSN 6810-00-281-2014](https://alliancechemical.com/products/nsn-6810-00-281-2014): CAS 5949-29-1; pack 500 GRAMS; spec A-A-59282; quote only
- [CITRIC ACID, MONOHYDRATE (ACS) — NSN 6810-00-597-6098](https://alliancechemical.com/products/nsn-6810-00-597-6098): CAS 5949-29-1; pack 5 LBS NET WT.; spec A-A-59282; quote only
- [CLEANING COMPOUND, SOLVENT — NSN 6850-01-377-1811](https://alliancechemical.com/products/nsn-6850-01-377-1811): pack 1.0 PINT; spec A-A-59601E NOT 2; quote only
- [CLEANING COMPOUND, SOLVENT (GRADE A) — NSN 6850-00-538-0929](https://alliancechemical.com/products/nsn-6850-00-538-0929): pack ONE GL EQUATES TO A CAN THAT CONTAINS 1.0 GALLONS; spec A-A-59281B, TT-I-735; quote only
- [CLEANING COMPOUND, SOLVENT (TYPE III) — NSN 6850-01-377-1809](https://alliancechemical.com/products/nsn-6850-01-377-1809): CAS 64742-47-8; pack 1.0 GALLONS CONTAINER; spec A-A-59601E; quote only
- [CLEANING COMPOUND, SOLVENT (Type III) — NSN 6850-01-377-1812](https://alliancechemical.com/products/nsn-6850-01-377-1812): CAS 64742-47-8; pack GALLON; spec A-A-59601E NOT 2; quote only
- [CUPRIC SULFATE PENTAHYDRATE (ACS) — NSN 6810-00-241-1203](https://alliancechemical.com/products/nsn-6810-00-241-1203): CAS 7758-99-8; pack 500.0 GRAMS NET WT.; spec A-A-59282; quote only
- [DISTILLED/DEIONIZED WATER, ACS — NSN 6810-00-107-1510](https://alliancechemical.com/products/nsn-6810-00-107-1510): CAS 7732-18-5; pack 5.0 GALLONS; spec A-A-59282; quote only
- [ETHYL ACETATE, TECHNICAL — NSN 6810-00-062-6954](https://alliancechemical.com/products/nsn-6810-00-062-6954): CAS 141-78-6; pack 1.0 QUART (32 OUNCES); spec TT-E-751C; quote only
- [ETHYL ALCOHOL (U.S.P. GRADE) — NSN 6810-00-823-8003](https://alliancechemical.com/products/nsn-6810-00-823-8003): CAS 64-17-5; pack 5.0 GALLONS; spec MIL-E-51454A NOT 3; quote only
- [ETHYLENE GLYCOL, TECHNICAL — NSN 6810-00-006-4205](https://alliancechemical.com/products/nsn-6810-00-006-4205): CAS 107-21-1; pack 1.0 GALLON; spec ASTM E1119 (R 2015) (E 2016); quote only
- [GREASE, GENERAL PURPOSE — NSN 9150-00-663-1770](https://alliancechemical.com/products/nsn-9150-00-663-1770): pack 6.0 POUNDS; quote only
- [GREASE, GENERAL PURPOSE (NLGI GRADE 2) — NSN 9150-00-929-7946](https://alliancechemical.com/products/nsn-9150-00-929-7946): pack 14 - 14.5 OZ NET WT.; quote only
- [GREASE, UTILITY — NSN 9150-01-525-1498](https://alliancechemical.com/products/nsn-9150-01-525-1498): pack 14 OZ; quote only
- [ISOOCTANE (ACS) — NSN 6810-01-458-4119](https://alliancechemical.com/products/nsn-6810-01-458-4119): CAS 540-84-1; pack 4 Liters; spec A-A-59282; quote only
- [ISOPROPYL ALCOHOL, TECHNICAL (GRADE A) — NSN 6810-00-286-5435](https://alliancechemical.com/products/nsn-6810-00-286-5435): CAS 67-63-0; pack 1.0 GALLONS; spec TT-I-735A(3); quote only
- [LUBRICATING OIL, FOOD PROCESSING EQUIPMENT (Grade A) — NSN 9150-01-237-7980](https://alliancechemical.com/products/nsn-9150-01-237-7980): pack 1.0 GALLON; spec MIL-PRF-24651A; quote only
- [LUBRICATING OIL, FOOD PROCESSING EQUIPMENT (TYPE I) — NSN 9150-01-237-7467](https://alliancechemical.com/products/nsn-9150-01-237-7467): pack 1.0 GALLON; spec MIL-PRF-24651A; quote only
- [LUBRICATING OIL, GEN — NSN 9150-01-644-1560](https://alliancechemical.com/products/nsn-9150-01-644-1560): pack 1.0 QUART; quote only
- [LUBRICATING OIL, REFRIGERANT COMPRESSOR — NSN 9150-00-823-7905](https://alliancechemical.com/products/nsn-9150-00-823-7905): pack 1.0 GALLONS; spec VV-L-825C; quote only
- [METHYL ETHYL KETONE (TECHNICAL) — NSN 6810-00-281-2763](https://alliancechemical.com/products/nsn-6810-00-281-2763): CAS 78-93-3; pack 55 GALLONS; spec ASTM D740-11; quote only
- [METHYL ETHYL KETONE, TECHNICAL — NSN 6810-00-281-2785](https://alliancechemical.com/products/nsn-6810-00-281-2785): CAS 78-93-3; pack 1.0 GALLON; spec ASTM D740-11; quote only
- [METHYL ISOBUTYL KETONE (ACS CERTIFIED) — NSN 6810-00-052-1371](https://alliancechemical.com/products/nsn-6810-00-052-1371): CAS 108-10-1; pack 1 QT GLASS BOTTLE; spec A-A-59282; quote only
- [METHYL N-PROPYL KETONE — NSN 6810-01-459-1991](https://alliancechemical.com/products/nsn-6810-01-459-1991): CAS 107-87-9; pack 55.0 GALLONS; quote only
- [NAPHTHA, AROMATIC (TYPE II) — NSN 6810-00-223-9067](https://alliancechemical.com/products/nsn-6810-00-223-9067): CAS 64742-94-5; pack 1.0 GALLONS; spec TT-N-97E; quote only
- [PETROLEUM ETHER (ACS) — NSN 6810-00-227-1307](https://alliancechemical.com/products/nsn-6810-00-227-1307): CAS 8032-32-4; pack 5.0 GALLONS; spec A-A-59282; quote only
- [PETROLEUM ETHER, TECHNICAL — NSN 6810-00-584-3079](https://alliancechemical.com/products/nsn-6810-00-584-3079): CAS 8032-32-4; pack 1.0 GALLON AT 20 DEG C; spec O-E-751E; quote only
- [POTASSIUM CHLORATE (ACS) — NSN 6810-00-241-1150](https://alliancechemical.com/products/nsn-6810-00-241-1150): CAS 3811-04-9; pack ONE BT CONTAINS 100 GRAMS NET WT.; spec A-A-59282; quote only
- [POTASSIUM DICHROMATE, TECHNICAL — NSN 6810-00-264-6717](https://alliancechemical.com/products/nsn-6810-00-264-6717): CAS 7778-50-9; pack 100 LBS NET WT; spec A-A-59508B; quote only
- [POTASSIUM HYDROXIDE SOLUTION (Class 4) — NSN 6810-01-505-0542](https://alliancechemical.com/products/nsn-6810-01-505-0542): CAS 1310-58-3; pack 6.0 QUARTS IN A 2.0 GALLON BOTTLE; spec MIL-DTL-11751J; quote only
- [PROPYLENE GLYCOL (TECHNICAL) — NSN 6810-01-181-7121](https://alliancechemical.com/products/nsn-6810-01-181-7121): CAS 57-55-6; pack 1.0 GALLONS; spec MIL-DTL-83800C; quote only
- [SODIUM CHLORATE (ANALYZED REAGENT) — NSN 6810-00-262-8587](https://alliancechemical.com/products/nsn-6810-00-262-8587): CAS 7775-09-9; pack 500 GRAMS; spec A-A-59282; quote only
- [SODIUM CHLORIDE (TECHNICAL) — NSN 6810-00-227-0439](https://alliancechemical.com/products/nsn-6810-00-227-0439): CAS 7647-14-5; pack 80.0 POUNDS BAG NET WT; spec A-A-694F; quote only
- [SODIUM CHLORIDE, TECHNICAL — NSN 6810-01-528-4690](https://alliancechemical.com/products/nsn-6810-01-528-4690): CAS 7647-14-5; pack 15 LBS NET WT.; spec A-A-694F; quote only
- [SULFURIC ACID, ELECTROLYTE — NSN 6810-00-823-8007](https://alliancechemical.com/products/nsn-6810-00-823-8007): CAS 7664-93-9; pack 5.0 GALLONS; spec O-S-801F; quote only
- [SULFURIC ACID, ELECTROLYTE (Class 4) — NSN 6810-00-236-0702](https://alliancechemical.com/products/nsn-6810-00-236-0702): CAS 7664-93-9; pack 1.0 GALLON; spec O-S-801F; quote only
- [TRISODIUM ETHYLENEDIAMINETETRAACETIC ACID (TYPE II) — NSN 6810-01-312-4076](https://alliancechemical.com/products/nsn-6810-01-312-4076): CAS 150-38-9; pack 25 LBS; spec MIL-DTL-24494C; quote only

## For Shopping Agents (Agentic Commerce)

Machine-readable commerce instructions, Universal Commerce Protocol (UCP) endpoints, and checkout rules for agents acting on behalf of a user:

- Agent instructions: https://alliancechemical.com/agents.md
- UCP discovery: https://alliancechemical.com/.well-known/ucp
- Agentic sitemap: https://alliancechemical.com/sitemap_agentic_discovery.xml

## Contact

- [Contact Page](https://alliancechemical.com/pages/contact): General inquiries
- [Compliance Contact](https://alliancechemical.com/pages/contact-compliance): Regulatory and compliance questions
- [About Us](https://alliancechemical.com/pages/about-us): Company background